Develop Bugs

[Q]( Problem is solved)my phone model number turned from sgh-i747 into sph-i710

hey guys! Ive flashed synergy rom into my sgh-i747 and ive got bunch of problems... one of them is that my phone model number turned from sgh-i747 into sph-i710 . I have no clue why that happened .please help !!((

oziverson said:
hey guys! Ive flashed synergy rom into my sgh-i747 and ive got bunch of problems... one of them is that my phone model number turned from sgh-i747 into sph-i710 . I have no clue why that happened .please help !!((
Click to expand...
Click to collapse
thats because you flashed the sprint version of the ROM onto your S3. download the AT&T version, full wipe and flash.

but if its possible, i could intall the version of i9300 and it will turn into international version wont it?

oziverson said:
but if its possible, i could intall the version of i9300 and it will turn into international version wont it?
Click to expand...
Click to collapse
NO! it will turn into a brick!!
only flash ROMs that are specifically for your device!
dude, you need to read up on all of this. check out the general forum. if your phone is an i747, then ONLY flash i747 ROMs.

dude you got me wrong . I know all about it but syneergy has published its att-sprint-us cellular version together. but i think its sprint based but available for all . and it screwed up my phone . I dont know how to come back. ı tried to flash cm att version but i couldnt .

http://forum.xda-developers.com/showthread.php?t=2179330
Step 5 in this thread has to do with flashing a ROM. download the CORRECT ROM and Gapps and follow those steps.
After you have completed that and have booted into the device fine (everything's correct and working), follow Step 4 on that thread to create a backup.
---------- Post added at 02:39 PM ---------- Previous post was at 02:38 PM ----------
oziverson said:
dude you got me wrong . I know all about it but syneergy has published its att-sprint-us cellular version together. but i think its sprint based but available for all . and it screwed up my phone . I dont know how to come back. ı tried to flash cm att version but i couldnt .
Click to expand...
Click to collapse
you asked about installing an international ROM. that's what i was replying to. what synergy release did you download?

okay it may seem i go stupid but İ had to flash sprint becuz it wasnt accepting att version. so i did install it and it seems to be workin okay. But i concern about i might be a problem after a while. And I still could not figure out how to make it back. i mean make it back to att version ? can anyone explain that ?

oziverson said:
okay it may seem i go stupid but İ had to flash sprint becuz it wasnt accepting att version. so i did install it and it seems to be workin okay. But i concern about i might be a problem after a while. And I still could not figure out how to make it back. i mean make it back to att version ? can anyone explain that ?
Click to expand...
Click to collapse
the reason i asked what release you were using was because certain versions of synergy dont work well with AT&T. the r290 and higher releases are supposedly working well.
if you used a release listed as r290 or higher then you might want to try a different ROM

http://forum.xda-developers.com/showthread.php?t=1792499 i have flashed the latest version that is r373 . it turned my phone into what it is not but suprisingly it works like a horse

oziverson said:
dude you got me wrong . I know all about it but syneergy has published its att-sprint-us cellular version together. but i think its sprint based but available for all . and it screwed up my phone . I dont know how to come back. ı tried to flash cm att version but i couldnt .
Click to expand...
Click to collapse
Don't mistake me as being "hard/rude"... but "know all about it" means you would've been careful in the first place, along with ways to come back in case of issue.
Like the previous poster said, you should flash only the ROM that's intended for the phone.
Also, a dev might release a ROM for all three carriers, but if you actually look into the OP of that ROM you'll realize that there is a version for each device.

Oh.i took it as my mistake.i shouldnt have said that. But i meant that i knew what he says but yeah ur right.i have no explanation for that. But i still cant see att version separetly ? Could you please link me

oziverson said:
Oh.i took it as my mistake.i shouldnt have said that. But i meant that i knew what he says but yeah ur right.i have no explanation for that. But i still cant see att version separetly ? Could you please link me
Click to expand...
Click to collapse
That's fine. Not an issue esp cos people here only try to help than finger point
Anyways, back to topic. If you do not see an AT&T version, I would suggest checking in the ROM thread itself. And if you still can't find it, it would mean there is no AT&T version. So you might be better off with one of the many AT&T specific ROMs here.

Okay thanks a lot for ur interest.im gonna give a few try more. And id like to say that even if my model nber is changed into sprint, my baseband number still shows that it is at&t . yeah its a bit confusing for me.anyways i will try to make it back and lets see if i can make it.

Problem is solved !!
I solved the problem through changing some parameters in built.prop like ''from d2spr to d2att and I used prop editor app ". http://forum.xda-developers.com/showthread.php?t=1828152 ....this link has the sample for att mobile phones. By this way, i succesfully changed the model number so that I could use att version stock rom to take everything back. I flashed att stock rom through Odin and its done !
Thanks for everbody's help !! sorry for english ,cuz im not native. If anyone has the problem and cant make it through, please let me know and im gonna try to make it clear.

oziverson said:
I solved the problem through changing some parameters in built.prop like ''from d2spr to d2att and I used prop editor app ". http://forum.xda-developers.com/showthread.php?t=1828152 ....this link has the sample for att mobile phones. By this way, i succesfully changed the model number so that I could use att version stock rom to take everything back. I flashed att stock rom through Odin and its done !
Thanks for everbody's help !! sorry for english ,cuz im not native. If anyone has the problem and cant make it through, please let me know and im gonna try to make it clear.
Click to expand...
Click to collapse
You may have the wrong recovery installed on your phone. The synergy thread has specific instructions concerning which version will be installed and it being dependant on your specific recovery. It clearly says that if you get to the installer in the aroma...and your phones model is shown and is wrong...that you should install the phones proper recovery.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

Please Help us...

Please help us, like me and other people search in this forum daily with the hope to find a solution for the unlock, when I bought this phone in USA I check the imei and its clean, a guy in T Mobile said the phone its good an use a tmobile sim in USA, I find in internet a lot of page of the unlock service, so I think, its ok I can unlock.
But the reality it's different, I want to understand the most people like me, we pay over $ 700 for a great phone but we cant use..
I saw a amazing things in this forum, i know in this forum have a great developers..
So please... help us..

fabioplata said:
Please help us, like me and other people search in this forum daily with the hope to find a solution for the unlock, when I bought this phone in USA I check the imei and its clean, a guy in T Mobile said the phone its good an use a tmobile sim in USA, I find in internet a lot of page of the unlock service, so I think, its ok I can unlock.
But the reality it's different, I want to understand the most people like me, we pay over $ 700 for a great phone but we cant use..
I saw a amazing things in this forum, i know in this forum have a great developers..
So please... help us..
Click to expand...
Click to collapse
Same here, what i end up doing was flashing a G925F ROM (global version) via TWRP then flash a G925T kernel and once it rebooted it did asked me for an unlock code then after that i ordered an unlock code .. now I'm just waiting for the code to arrive and try out my AT&T sim card...

Can you please provide link for the rom that you flashed?

Atrix_Lover said:
Can you please provide link for the rom that you flashed?
Click to expand...
Click to collapse
here you go:
https://mega.co.nz/#!J8IWlZCC!bPX514ZHY3sJ1A_NHIBpaO5efyDZSAFYEY28VILuiAc
and kernel:
http://forum.xda-developers.com/tmo...lopment/kernel-kt-sgs6e-ocv-ktweaker-t3099758

batillojr said:
here you go:
https://mega.co.nz/#!J8IWlZCC!bPX514ZHY3sJ1A_NHIBpaO5efyDZSAFYEY28VILuiAc
and kernel:
http://forum.xda-developers.com/tmo...lopment/kernel-kt-sgs6e-ocv-ktweaker-t3099758
Click to expand...
Click to collapse
I just flashed the ROM and kernel but the earpiece and mic are not working during calls, did this happened to you?

Atrix_Lover said:
I just flashed the ROM and kernel but the earpiece and mic are not working during calls, did this happened to you?
Click to expand...
Click to collapse
since i can't use the sim card yet until i get the unlock code, i can only confirmed that making calls with google talk app does work just fine.

I hope it works for you, going back to g925t now Good Luck

Atrix_Lover said:
I just flashed the ROM and kernel but the earpiece and mic are not working during calls, did this happened to you?
Click to expand...
Click to collapse
batillojr said:
since i can't use the sim card yet until i get the unlock code, i can only confirmed that making calls with google talk app does work just fine.
Click to expand...
Click to collapse
Is is possible to flash back just the stock kernel and keep the international ROM, or will that reinstate the T-Mobile lock?
Also, I went ahead and filed a complaint with the FCC that I believe T-Mobile is violating the new unlock law. Essentially, T-Mobile is making customers who buy the phone outright get service and I don't think this is appropriate. I got an email today that the complaint was served to T-Mobile and they have 30 days to reply. Let's see what happens.
This is the site I used to file the complaint:
https://consumercomplaints.fcc.gov/hc/en-us

hamzer11 said:
Is is possible to flash back just the stock kernel and keep the international ROM, or will that reinstate the T-Mobile lock?
Also, I went ahead and filed a complaint with the FCC that I believe T-Mobile is violating the new unlock law. Essentially, T-Mobile is making customers who buy the phone outright get service and I don't think this is appropriate. I got an email today that the complaint was served to T-Mobile and they have 30 days to reply. Let's see what happens.
This is the site I used to file the complaint:
https://consumercomplaints.fcc.gov/hc/en-us
Click to expand...
Click to collapse
that's how mine is at the moment,, seems to be ok'd but until i make a call with att sim card i wont know for sure

batillojr said:
that's how mine is at the moment,, seems to be ok'd but until i make a call with att sim card i wont know for sure
Click to expand...
Click to collapse
Thanks, keep us updated. You may be a hero for many people if this combo works.

oh man...
batillojr said:
Same here, what i end up doing was flashing a G925F ROM (global version) via TWRP then flash a G925T kernel and once it rebooted it did asked me for an unlock code then after that i ordered an unlock code .. now I'm just waiting for the code to arrive and try out my AT&T sim card...
Click to expand...
Click to collapse
Oh man,,, I really hope your method work, I am downloading right now..
I don't have the code yet, but I try anything..
Men, if works.. you are my hero, if not,, you are my hero too for help us.
Bravo...

fabioplata said:
Oh man,,, I really hope your method work, I am downloading right now..
I don't have the code yet, but I try anything..
Men, if works.. you are my hero, if not,, you are my hero too for help us.
Bravo...
Click to expand...
Click to collapse
Yeah , i'm really hoping this works.. i hate that Tmobile came up with this **** app ,, why are we at fault cause their customers sell phones

Hi guys!
Did it worked?
Cheers!

This is happening with all new T-mobile phones. They have a eligibility requirement where the phone must be used on a T-mobile account for 40 days before it can be unlocked through their "unlock device" app. Which is honestly... a piece of ****.
SOLUTION: 1. unlock code. 2. Non T-mobile rom. 3. ??? 4. profit! (jk on 3.)
What many have been doing on other phones: m9, z3, etc, you flash a non t-mobile rom! that's pretty much it. You flash a non T-mobile ROM and put in your sim card, it should ask for the sim unlock pin/code. After you do that ONCE, it should be completely unlocked, you can go back to stock or any other rom and it should be sim unlocked!
I have not tried it on the s6 edge myself. BUT it should be the same thing.
GOOD LUCK!

I with for code
I'm ready, I bought the code but I don't received yet.. I have my phone rooted, with twrp. I download the ROM and the kernel..
I think the code arrived in two days... But if somebody haves news.. Please.. Tell us.

first?
batillojr said:
here you go:
https://mega.co.nz/#!J8IWlZCC!bPX514ZHY3sJ1A_NHIBpaO5efyDZSAFYEY28VILuiAc
and kernel:
http://forum.xda-developers.com/tmo...lopment/kernel-kt-sgs6e-ocv-ktweaker-t3099758
Click to expand...
Click to collapse
First the room or the Kernel..
I flash first the room, after the kernel but i havê problems with the digital fingers and others.
Thanks

The fingerprint is not working with custom ROMs right now..

Ok..
batillojr said:
The fingerprint is not working with custom ROMs right now..
Click to expand...
Click to collapse
Ok men, but now I have a problem, the phone always ask about my finger print but dont work, for that reason I use another flash, but this flash it's 5.1.1 not stock, its a ROM, change the block mode, Try to install your ROM but never work, and install the stock rom 5.0.2 but dont work.
My phone its brick.. try to start but only show the t mobile logo and restart, what can I do now..

Try flashing stock with Odin,

all ok
batillojr said:
Try flashing stock with Odin,
Click to expand...
Click to collapse
Yes, I flash stock with Odin, but dont start, but flash recovery and did the all wipes and all ok...
Thanks
are you still you code?

Android pay on EPF4

Is there ANY way to get Android pay to work on EPF4? I really really dont want to fool with Odin and moving back. Honestly, I dont know what I am doing.
Thanks in advance.

to dave30534: can't help you. But on other hand I have the same issue after updating to 6.0.1 EPH5. Android Pay is here, but it has no reaction on cashier terminals. NFC works, transferred a file from my phone to another through NFC. Don't know what is the problem

dave30534 said:
Is there ANY way to get Android pay to work on EPF4? I really really dont want to fool with Odin and moving back. Honestly, I dont know what I am doing.
Thanks in advance.
Click to expand...
Click to collapse
No. Google only enables it on release builds. Update to the released version of marshmallow.

Shanghai.Knight said:
No. Google only enables it on release builds. Update to the released version of marshmallow.
Click to expand...
Click to collapse
I have searched the forums. Is there a direct link? And must one use Odin or can we do it like we flashed the beta build?
Think I found it...
Is this it? https://www.androidfilehost.com/?fid=24651430732238073
Dl to card then boot in recovery mode like last time?

You MUST use ODIN to get off of a beta build to a released build. There are no update options.
Once on a released build you can use the appropriate update with the corresponding build number to that you are on, and what you want to update to. That can be placed on your SD card to update.

Custom ROM AXES ROM v.1 (Android nougat) on Modem Android Oreo???

Friends (My A520W) I have a doubt because when I installed a Custom ROM Android 7 on the modem in Android 8 I'm going the IMEI?
There is some way to recover the IMEI in that Custom ROM
There is some way to work like this or it is impossible????'
Why is the IMEI broken?

your phone is dead. samsung will reject it.
offline store will ask you to throw your phone away.
but i, i will pay for your phone. us$10?

flakomix said:
Friends (My A520W) I have a doubt because when I installed a Custom ROM Android 7 on the modem in Android 8 I'm going the IMEI?
There is some way to recover the IMEI in that Custom ROM
There is some way to work like this or it is impossible????'
Why is the IMEI broken?
Click to expand...
Click to collapse
You need to flash android Nougat bootloader and modem. Those two versions need to be the same as the android version. There is a guide in the guides section that can help you. Also, you can't install earlier version of bootloader and modem if those are the newest versions right now. If that is the case, you can install an 8.1 custom ROM and it should be fine.

sheepkill15 said:
Stop talking bull****, trying to scam people this way.
Click to expand...
Click to collapse
u need to take holiday sir, seriously..
its getting funnier here.
since you are also a senior member here. u could see all posts i posted, right?
and... i face the same problem. but i solved this problem by my own.
do you think im serious want to buy his phone? hell no....

leo31 said:
u need to take holiday sir, seriously..
its getting funnier here.
since you are also a senior member here. u could see all posts i posted, right?
and... i face the same problem. but i solved this problem by my own.
do you think im serious want to buy his phone? hell no....
Click to expand...
Click to collapse
I see. I couldn't realize the irony... Looking back on that, I feel bad, please forgive me.

flakomix said:
Friends (My A520W) I have a doubt because when I installed a Custom ROM Android 7 on the modem in Android 8 I'm going the IMEI?
There is some way to recover the IMEI in that Custom ROM
There is some way to work like this or it is impossible????'
Why is the IMEI broken?
Click to expand...
Click to collapse
just flash whole nougat rom. and then flash oreo using odin.
it will solve the problem

But I could not because I have Bit5 in Oreo and I did not find a bit 5 in nougat. Can someone help me? A520W Baseband Version A520WVLU5CRJ3 Android Security pacht 1 Nov 2018

General A WARNING TO ALL A32 4G/5G USERS (very important)

As you have seen in the title, this is a warning. DON'T root your galaxy a32, as it can take some time but the phone will lose fingerprint unlock and sim card/internet functionality because of UNKNOWN BASEBAND and IMEI error.
You can't get it to work even reflashing stock firmware, and you can't downgrade because of samsung bootloader lock. There's no TWRP for the 4g variant so you can't backup important partitions. Many people are having this problem with both 4g and 5g, as seen in the forums from those device.
If you don't want to turn ur galaxy into an AndroidPod with no sim, then don't root it, atleast for now or until magisk people bug fix it.
Assine o Abaixo-assinado
Fix MAGISK and baseband in Samsung galaxy A32!
www.change.org
Lets try to talk to john wu on twitter guys

Are we completely sure it's due to a bug in Magisk?

Mighty_Rearranger said:
Are we completely sure it's due to a bug in Magisk?
Click to expand...
Click to collapse
most likely... the same people that made the first rooting guides for the a32 were having this problem

applesucksLmao said:
most likely... the same people that made the first rooting guides for the a32 were having this problem
Click to expand...
Click to collapse
I think we should post an issue in the Magisk github and see if anyone has any clue.

Mighty_Rearranger said:
I think we should post an issue in the Magisk github and see if anyone has any clue.
Click to expand...
Click to collapse
yeah probably, or try tagging john wu in twitter

ill report that to github, brb

:c
so sad

tungle13323 said:
:c
so sad
Click to expand...
Click to collapse
yep, thats absolutely crazy... i guess we, a32 users are just unlucky at this point lol

I posted in the Magisk support forum.
I haven't opened a bug repot in github yet, cause they require the bugs to be tried on their alpha "canary" versions.
I found very old bug reports of people having the same problem with older samsungs. IDK if related. I'm still investigating and talking in the support forum.
Maybe soon I'll try flashing their canary version. I don't thinnk it will fix it but It'll help me investigate further into the partitions and such.

dronkit said:
I posted in the Magisk support forum.
I haven't opened a bug repot in github yet, cause they require the bugs to be tried on their alpha "canary" versions.
I found very old bug reports of people having the same problem with older samsungs. IDK if related. I'm still investigating and talking in the support forum.
Maybe soon I'll try flashing their canary version. I don't thinnk it will fix it but It'll help me investigate further into the partitions and such.
Click to expand...
Click to collapse
we could find someone that makes twrp for a32 4g, and then get a backup from someone or idk

I have TWRP for the 5G version: https://androidfilehost.com/?w=files&flid=325796 (not my code)

also found it for 4G: https://www.mediafire.com/file/bshjep6n3pqjt7r/twrp-recovery-a32+4g+helio+G80.tar/file (not my code again) both of these are untested from me, so try at your own risk

before you say thank you, you're welcome

ayooo thanks, test it @Mighty_Rearranger @dronkit , I'm not with my phone rn lol, here the tutorial https://unofficialtwrp.com/twrp-351-root-galaxy-a32-4g/

if you need a clearer guide, here you go: https://www.getdroidtips.com/twrp-recovery-galaxy-a32-4g-root/ (this is where i got the 4g link from the other was from xda)

f10945yt said:
if you need a clearer guide, here you go: https://www.getdroidtips.com/twrp-recovery-galaxy-a32-4g-root/ (this is where i got the 4g link from the other was from xda)
Click to expand...
Click to collapse
Interesting, but i am gonna wait until someone create TWRP threads in Development section for this devices. I don't wanna break my devices.

f10945yt said:
I have TWRP for the 5G version: https://androidfilehost.com/?w=files&flid=325796 (not my code)
Click to expand...
Click to collapse
This will not work for 4G version, already ask for it.

applesucksLmao said:
ayooo thanks, test it @Mighty_Rearranger @dronkit , I'm not with my phone rn lol, here the tutorial https://unofficialtwrp.com/twrp-351-root-galaxy-a32-4g/
Click to expand...
Click to collapse
OK, so if I boot TWRP what do I do next? Do a backup? Erase the NVRAM?
Also I don't wanna be rude but are you sure it's for any A32 model? The tutorial says something about it being only for Q models.

Check your SM- model, if it's not a Q then just find another ROM.
Boot TWRP and install the stock ROM for the 4G version of the phone.

It should be a Q at the end.