I notice that AT&T have disabled network mode selection. (I am not in the USA).
Is there a reliable way to force the phone over to using a 3G connection when required? It seems mine is intent on staying on 4G, even when the connection is so poor that the speed is unuseable whereas 3G in that area would be full reception.
I have played around with various *#, #* commands re: network but nothing seems to stick. Any chance network mode has been re-enabled in updates (which I don't have access to)?
Cheers
I font known questions
Related
The problem: At home, my 3G signal is very weak - occasionally it reaches 2 out of 4 bars, often it's only one and it frequently drops out altogether causing the phone to switch to EDGE. At work, however, I get a very good 3G signal, so it would be useful to use 3G.
Now, in theory the "Auto" band setting (auto between GSM and WCDMA) ought to cover this; but in practice the 3G signal at home is just strong enough that the phone keeps trying to switch into 3G mode (and thrashing the battery) but the actual data speed I get (even over HDSPA) doesn't seem much faster than EDGE, and every time it loses the HDSPA link and drops to EDGE there's a long pause before the data starts flowing again.
I've tried switching the phone's band setting between "GSM" and "Auto", using the GSM setting at home, and Auto elsewhere; but doing that plays havoc with "Microsoft Direct Push". Switching the phone band causes the data connection to drop, which switches Direct Push off; switching Direct Push back on again loses the more detailed settings I have set in ActiveSync (where I download email manually during work hours but automatically outside of work). In addition, because the data connection is lost, any application that's using it generally has to be shut down and restarted.
Is there some way of moving the phone between "Auto" and "2G only" mode without messing up the Direct Push setting and, if possible, without severing the data connection? While actually in "Auto" mode the phone happily switches between HDSPA and EDGE without any side-effects; so it seems like there ought to be a way to tell the phone "be in Auto mode but for the moment pretend that there is no 3G signal even if there actually is a weak one", and then use that setting in weak 3G areas, switching back to normal "Auto" behaviour when you know the 3G signal has improved. Or alternatively perhaps "Auto" mode could be made to not try to switch to 3G until you get a 3-bar signal, but, once switched, try and stay with 3G until it drops to 1 bar?
Hi..
Anybody knows how to switch manually to use 2G or 3G only?
Because sometimes when I am on the 3G coverage area, the phone still use the EDGE data connection rather than the 3G/HSDPA data connection. It really annoy me because the speed is slow if I use the EDGE connection.
In my old nokia, it allows me to use the 2G/3G connection only, so I wonder if desire can also do that.
Settings/wireless & networks/mobile networks/network mode. The auto is however set up quite well. The reason you keep finding edge, is that the edge signal might be stronger that the 3G. 3G will always be the preferred option for the phone, but keep in mind that a strong signal on edge will beat a poor signal on 3G where download speed is concerned. Therefor your phone tends to pick the fastest/strongest signal in your area.
Hello,
When I am at home a have a really low 3g signal strength meaning call quality is very poor or the call does not get through. I really need a toggle to switch to GSM only as this gets me full signal plus I don't need 3G at home as I am connected to my wireless broadband. I bought Tasker but no option available as of yet (I think it will only be for rooted phones when it does become available anyway).
I tried turning mobile data off but it still seems to have weak signal with network mode set to auto. I can do this manually but I would like it to be automated somehow. Any suggestions?
HTC Desire 2.2 Stock
Hi guys, I'm plenty familiar with the Note II having had mine since October release. I'm having an issue where I will be in a solid 4G coverage area (at my home) and my phone will stay in 2G mode.
There is a problem with either the tower or the phone, I'm leaning toward tower because my wife has my old Sensation 4G which is also staying on 2G. Have any of you encountered/noticed that your phone stays in 2G even though you are in a 4G coverage area? For me either on the Sensation or Note II, I just pick WCDMA, 4G pops in and works great. The only problem is that I have to remember to put it back on auto when I leave the area. I looked up and attempted the cell codes for making the phone prefer 4G, but without success there. Also my phone picks up 4G automatically when I'm at work, so again leaning toward tower (but how and why the tower can control this I have no idea).
I also noticed some threads claiming wifi calling would detect wireless networks nearby and disable 4G. I'm leaning towards BS on that because 1. my wi-fi is almost always turned off (true unlimited 4G plan), and 2. when I disable wifi calling all together it still exhibits the same behavior.
I'm running out of ideas - any help is appreciated!
vinas1 said:
Hi guys, I'm plenty familiar with the Note II having had mine since October release. I'm having an issue where I will be in a solid 4G coverage area (at my home) and my phone will stay in 2G mode.
There is a problem with either the tower or the phone, I'm leaning toward tower because my wife has my old Sensation 4G which is also staying on 2G. Have any of you encountered/noticed that your phone stays in 2G even though you are in a 4G coverage area? For me either on the Sensation or Note II, I just pick WCDMA, 4G pops in and works great. The only problem is that I have to remember to put it back on auto when I leave the area. I looked up and attempted the cell codes for making the phone prefer 4G, but without success there. Also my phone picks up 4G automatically when I'm at work, so again leaning toward tower (but how and why the tower can control this I have no idea).
I also noticed some threads claiming wifi calling would detect wireless networks nearby and disable 4G. I'm leaning towards BS on that because 1. my wi-fi is almost always turned off (true unlimited 4G plan), and 2. when I disable wifi calling all together it still exhibits the same behavior.
I'm running out of ideas - any help is appreciated!
Click to expand...
Click to collapse
In settings>more settings>mobile networks>network mode:
You should ALWAYS be set to GSM/WCDMA (Auto mode)
This will automatically get you the best data signal available at your location. If you only get 2G in some locations, that's normal. You can try calling TMO support and have them check your address to see if you SHOULD have 4G at that location. If you really want to try to see what is going on, install an app called Open Signal Maps form the Play store. Among other useful things, it will geolocate the towers you are connected to complete with distance and mapped street address.
Where I live I only ever get 2 or 3 bars of 2G data. I use the TMO wifi calling app for all my calls and texting. This is only way I can get reliable service at home.
vouty said:
In settings>more settings>mobile networks>network mode:
You should ALWAYS be set to GSM/WCDMA (Auto mode)
This will automatically get you the best data signal available at your location. If you only get 2G in some locations, that's normal.
Click to expand...
Click to collapse
Thanks for replying vouty. When I switch from auto mode to WCDMA I have 4 full bars. That's the funny part. Speedtest is giving me around 12Mbps down 3 up on average (I live right by the tower - like .5 mile), so there is for sure something strange happening. If I keep wifi on it really isn't an issue, but I prefer to not mess with wifi and just keep it in 4G while at home, but as frustrating as this problem is, the phone refuses to switch from 2G on it's own. Once I toggle from AUTO to WCDMA, and then back to auto - it will stay on 4G. It's almost as if I am waking it up and causing the phone to re-detect the signal.
vouty said:
In settings>more settings>mobile networks>network mode:
You should ALWAYS be set to GSM/WCDMA (Auto mode)
This will automatically get you the best data signal available at your location. If you only get 2G in some locations, that's normal. You can try calling TMO support and have them check your address to see if you SHOULD have 4G at that location. If you really want to try to see what is going on, install an app called Open Signal Maps form the Play store. Among other useful things, it will geolocate the towers you are connected to complete with distance and mapped street address.
Where I live I only ever get 2 or 3 bars of 2G data. I use the TMO wifi calling app for all my calls and texting. This is only way I can get reliable service at home.
Click to expand...
Click to collapse
Cool app, very useful, appears I am on 3g at home. Turning off wifi to see if it changes to edge while using data.
Sent from my SGH-T889 using xda premium
I recently switched from AT&T to T-Mobile, and like the rest of us was suffering without 3G due to our lack of compatibility with the 1700MHz WCDMA that T-Mobile uses. One of my friends (a T-Mobile employee), however, informed me that it is indeed possible to get 3G by using the 1900MHz band, which T-Mobile is currently re-farming to support WCDMA. This trick is simple and easy, and I've had success with it thus far, albeit only in one location as of yet. There is a downside, however... as long as the trick is in place (as long as your phone is set to "WCDMA only" below), you cannot connect to EDGE. In other words, in an area where there is no 1900MHz 3G coverage, this process must be reversed to fall back to EDGE. As such, you may lose connection randomly and be completely unaware of it for hours, and I will mock you openly for attempting to blame me if you lose your job because you missed a call from your boss, lose your girlfriend because you stopped texting her, or lose your bacon because your remote bacon-protection app couldn't connect.
Remember, this is in the testing phase. It WILL get better over time and hopefully one day we won't even have to consider whether a phone supports 1700MHz... for now, though, report your findings below, preferably with location, signal strength/type, and down/up speed.
==PROCEDURE==
Go to dialer and enter *#*#4636#*#*
In the menu that pops up, tap "Phone Information"
Scroll down to the menu labelled "Set preferred network type" (it should be the first one) - this will likely be set to WCDMA preferred
Change it to WCDMA only
Switch to your main Settings app, then navigate to "Mobile Networks" (under "More..." by your Wi-Fi and Bluetooth)
Tap "Network Operators" and wait for the search to complete
Tap T-Mobile if it appears in the list
Once the phone has acquired a signal, you can return the Network Mode setting to WCDMA Preferred. Your phone should now switch back and forth between EDGE and HSPA+ fairly reliably.
===My Results===
At my home (approx. Colfax and Yosemite in Aurora, CO) I get 0-2 bars, mostly 3G but some H+ if I'm holding my phone and moving around, and 2-3 bars H+ if I set my phone down. Speedtest results range between 4 and 10 Mbps, with around 90ms ping. I've been keeping my phone set down with wireless tethering enabled, and it's been 100% usable thus far.
--Update--
Having used it daily for a few weeks, I'm pleased to report that there is moderate to good connectivity to at least 3G in most places. I still find myself on EDGE regularly, but I usually can get a WCDMA connection. Now, however, I'm annoyed because I exceeded 5GB data usage and am being throttled to below-EDGE speeds, which defeats the purpose of having 3G. >_<
what about AWS band ????/ its work
saqi4you said:
what about AWS band ????/ its work
Click to expand...
Click to collapse
Almost certainly not; see here.
If you have it working for some reason, go over there to tell everyone.
I'll test this later tonight. I'd be cool with 3G or H+ if it works. I have a T-Mob pay-by-the-day sim card that I'd like to use to tether my Nexus 7 to when I'm traveling (which is fairly rare).
I'm new to all this but how is this different from changing the APN settings?
Is this method better than changing APN settings?
This didn't work for me, Portsmouth, NH. It picked up the T-Mobile network in Network Operators but when I tried to select it it took forever and then said unable to connect, failed to register. Attempted a few times on a ucdlk3 stock based custom rom (Intergalactic II) and also on stock rooted.
Probably just not in a good location for this to work.
Sent from my Nexus 7 using xda premium