Develop Bugs

[Q] Custom Rom not installed properly

Hello,
Today i rooted my Galaxy grand with CWM using Odin and intalled SuperSu through recovery mode. Then i entered recovery mode again to install Xperia Z rom for Galaxy Grand , which i had placed in my external sd card. When i installed it using all the steps(Wipe data,cache etc etc) and reeboted my device, it got stuck on the boot screen with Samsung Galaxy grand logo running in loop for several time. Atlast i removed my battery and using the download mode again installed the 4.2.2 update with Odin.
Can u please tell me what went wrong while installing the rom.

nish1991 said:
Hello,
Today i rooted my Galaxy grand with CWM using Odin and intalled SuperSu through recovery mode. Then i entered recovery mode again to install Xperia Z rom for Galaxy Grand , which i had placed in my external sd card. When i installed it using all the steps(Wipe data,cache etc etc) and reeboted my device, it got stuck on the boot screen with Samsung Galaxy grand logo running in loop for several time. Atlast i removed my battery and using the download mode again installed the 4.2.2 update with Odin.
Can u please tell me what went wrong while installing the rom.
Click to expand...
Click to collapse
Maybe your source file is corrupted? In CWM, after installing the ROM, does it appears installation success or update success any similar message?
And suggest you wipe data & cache after installing the ROM, not before. Wipe Dalvik cache too.

soralz said:
Maybe your source file is corrupted? In CWM, after installing the ROM, does it appears installation success or update success any similar message?
And suggest you wipe data & cache after installing the ROM, not before. Wipe Dalvik cache too.
Click to expand...
Click to collapse
Source file? Are you speaking about the rom file I downloaded ?
Yes after installing the rom there is message Updated Successfully in CWM.
But i wiped the data and cache before installing the rom and dalvik cache after installing the rom..
Please help....can you give me detailed steps for installing rom.

If you are coming from stock rom after it shows installation complete again wipe all DATA frm cwm and reboot
Sent from my GT-I9505 using Tapatalk 2

Sulaimanshariff said:
If you are coming from stock rom after it shows installation complete again wipe all DATA frm cwm and reboot
Sent from my GT-I9505 using Tapatalk 2
Click to expand...
Click to collapse
Hey no worries...
I just installed another Xperia Z rom...and everything is grt nw....

Same Problem it is stucked now on that sceen and I too got the massage that it is install successfully... I cant install any other ROM as I want to use dual sim and most of the ROM are not compatible with dual SIM.... PLEASE HELP
soralz said:
Maybe your source file is corrupted? In CWM, after installing the ROM, does it appears installation success or update success any similar message?
And suggest you wipe data & cache after installing the ROM, not before. Wipe Dalvik cache too.
Click to expand...
Click to collapse

nish1991 said:
Hello,
Today i rooted my Galaxy grand with CWM using Odin and intalled SuperSu through recovery mode. Then i entered recovery mode again to install Xperia Z rom for Galaxy Grand , which i had placed in my external sd card. When i installed it using all the steps(Wipe data,cache etc etc) and reeboted my device, it got stuck on the boot screen with Samsung Galaxy grand logo running in loop for several time. Atlast i removed my battery and using the download mode again installed the 4.2.2 update with Odin.
Can u please tell me what went wrong while installing the rom.
Click to expand...
Click to collapse
"Atlast i removed my battery and using the download mode again installed the 4.2.2 update with Odin."
can you tell me how you did?? i am a newbie

stuck in boot loop
soralz said:
Maybe your source file is corrupted? In CWM, after installing the ROM, does it appears installation success or update success any similar message?
And suggest you wipe data & cache after installing the ROM, not before. Wipe Dalvik cache too.
Click to expand...
Click to collapse
yes everything went right but after i click reboot than i try to start samsung galaxy grand i9082 logo appears there it blink 4 5 times then i remove my battery and try to start again but now it is not even opening not cwm recovery menu and not going to the odin download mod also
ODIN mode is also not opening without usb cavle mean opening when plugged into charging.
please help me ,-_-,
, ,

Xperia Z Rom GT-I9082
Which CWM i recovery i use please tell me
i'm using CWM 6.0.2 recovery but when try to install i stuck in installing screen and then automatically back in recovery mode.
MD5 not found

yogeshp007 said:
Which CWM i recovery i use please tell me
i'm using CWM 6.0.2 recovery but when try to install i stuck in installing screen and then automatically back in recovery mode.
MD5 not found
Click to expand...
Click to collapse
Ik think that the CWM version is to old.
Also if you want to go to lollipop later then you can't do this with CWM 6.0.2.
Download a new CWM with an minimum version 6.4.5 or TWRP 2.8.6.0.
Never tried to install the older version roms with TWRP but with CWM I was able to install all.

Installing Rom
Sir i want to install xperia z rom please help me!!
tell me in details please

[Q] need help!

i got a very strange problem in my htc one x
everything was working fine and suddenly my phone was getting very hot (sometimes battery get hot sometimes cpu)
i was on slimkat rom
i thought re flashing will help as wiping dalvik cache didnt help.
i reflashed the same rom as a new one but the phone was still getting hot and was shutting down
i tried different kernel but same problem
then i tried aicp rom on slimkat's boot.img and without gapps it was working fine but without radio
then i thought it might be the gapps that is causing the problem but as soon as i flashed boot.img of aicp and booted up the same shutting down problem came
so i downgraded my recovery and tried to install viperx rom but in aroma as soon as installation goes ahead after formatting the phone reboots itself without completing installation.
so the conclusion is it is working fine with boot.img of non supported rom(as radio stays off)
so please someone help me what should i do ??????

spark2331995 said:
i got a very strange problem in my htc one x
everything was working fine and suddenly my phone was getting very hot (sometimes battery get hot sometimes cpu)
i was on slimkat rom
i thought re flashing will help as wiping dalvik cache didnt help.
i reflashed the same rom as a new one but the phone was still getting hot and was shutting down
i tried different kernel but same problem
then i tried aicp rom on slimkat's boot.img and without gapps it was working fine but without radio
then i thought it might be the gapps that is causing the problem but as soon as i flashed boot.img of aicp and booted up the same shutting down problem came
so i downgraded my recovery and tried to install viperx rom but in aroma as soon as installation goes ahead after formatting the phone reboots itself without completing installation.
so the conclusion is it is working fine with boot.img of non supported rom(as radio stays off)
so please someone help me what should i do ??????
Click to expand...
Click to collapse
Wipe everything in recovery except sd card and when you install viperx choice without wipe and don't forget to flash the boot.img from viperx rom

Thant said:
Wipe everything in recovery except sd card and when you install viperx choice without wipe and don't forget to flash the boot.img from viperx rom
Click to expand...
Click to collapse
i have philz recovery ...
i do clean to install new rom
wipe data factory reset
wipe cache
wipe dalvik cache
and by wipe everythingdo you to wipe the things under mounts and storage?
rca,rfs,devlog,data,boot???
i installed slimkat latest version with the boot.img provided in it and booted it up without flashing gapps its working fine but as soon as i install gapps and boot it up , after the optimizing app popup it shows shutting down
i have tried 2 gapps slimkat latest gapps and pico modular pa gapps

spark2331995 said:
i have philz recovery ...
i do clean to install new rom
wipe data factory reset
wipe cache
wipe dalvik cache
and by wipe everythingdo you to wipe the things under mounts and storage?
rca,rfs,devlog,data,boot???
i installed slimkat latest version with the boot.img provided in it and booted it up without flashing gapps its working fine but as soon as i install gapps and boot it up , after the optimizing app popup it shows shutting down
i have tried 2 gapps slimkat latest gapps and pico modular pa gapps
Click to expand...
Click to collapse
i downgraded my recovery to philz v5
successfully installed viperx
but it stays on htc boot screen(htc quietly brilliant screen) and before even starts it goes black(switch off).
update-
i did wipe data/factory reset and rebooted the phone it eventually started but for 2-3 seconds at the one time setup screen and again it showed htc screen and got powered off

spark2331995 said:
i downgraded my recovery to philz v5
successfully installed viperx
but it stays on htc boot screen(htc quietly brilliant screen) and before even starts it goes black(switch off).
update-
i did wipe data/factory reset and rebooted the phone it eventually started but for 2-3 seconds at the one time setup screen and again it showed htc screen and got powered off
Click to expand...
Click to collapse
Deleted

spark2331995 said:
i downgraded my recovery to philz v5
successfully installed viperx
but it stays on htc boot screen(htc quietly brilliant screen) and before even starts it goes black(switch off).
update-
i did wipe data/factory reset and rebooted the phone it eventually started but for 2-3 seconds at the one time setup screen and again it showed htc screen and got powered off
Click to expand...
Click to collapse
Try with phone connected to outlet charger and see if boot maybe faulty battery

khairulez said:
Flash boot.img via fastboot.
Click to expand...
Click to collapse
i have done that
Thant said:
Try with phone connected to outlet charger and see if boot maybe faulty battery
Click to expand...
Click to collapse
i had a backup of viperx 4.1.1 from previous month i restored it and rebooted the device first try had same problem
in second reboot with device connected to charger it booted up but wifi was not turning on and battery temp was around 37 c and cpu temp was 65 c which came down in some time to 45-47.
i have also tried that but no use and also phone works fine without gapps installed on aicp or slimkat rom
i have tried 2 gapps both not helping
i think maybe something in boot sector got corrupted?
i guess the problem exist when gapps is installed and wifi is on as i got to get the device on in only 2 conditons when gapps was not installed and wifi on and when wifi off and gapps installed

spark2331995 said:
i have done that
i have also tried that but no use and also phone works fine without gapps installed on aicp or slimkat rom
i have tried 2 gapps both not helping
i think maybe something in boot sector got corrupted?
Click to expand...
Click to collapse
On viperX rom you don't have gapps and you have this problem, or you make something wrong.
1. Flash the boot.img from rom archive
2. Install the rom via recovery TWRP 2.7.1 and after this install the gapps for the rom
3. reboot device
Wich SlimKat you try and with wich gapps post a link here
ARE YOUR bootloader IS UNLOCKED????

Thant said:
On viperX rom you don't have gapps and you have this problem, or you make something wrong.
1. Flash the boot.img from rom archive
2. Install the rom via recovery TWRP 2.7.1 and after this install the gapps for the rom
3. reboot device
Wich SlimKat you try and with wich gapps post a link here
ARE YOUR bootloader IS UNLOCKED????
Click to expand...
Click to collapse
yes bootloader is unlocked and i am using latest slimkat v8.0.4 from teemo and also i have tried v7.6 but same problem
and i have used slimkat latest mini gappsand pa pico modular gapps(24 mb)

spark2331995 said:
yes bootloader is unlocked and i am using latest slimkat v8.0.4 from teemo and also i have tried v7.6 but same problem
and i have used slimkat latest mini gappsand pa pico modular gapps(24 mb)
Click to expand...
Click to collapse
Now download this SLIMKAT 7.9 and this GAPPS and format system and data and dalvik and cache
First you must flash boot.img from rom archive second restart go in recovery install the rom and then gapps restart and report

Thant said:
Now download this SLIMKAT 7.9 and this GAPPS and format system and data and dalvik and cache
First you must flash boot.img from rom archive second restart go in recovery install the rom and then gapps restart and report
Click to expand...
Click to collapse
same problem no luck :'(

spark2331995 said:
same problem no luck :'(
Click to expand...
Click to collapse
And when you flash SlimKat and gapps are your recovery is TWRP.2.7.1 or you use Philz 5

Thant said:
And when you flash SlimKat and gapps are your recovery is TWRP.2.7.1 or you use Philz 5
Click to expand...
Click to collapse
philz 6

spark2331995 said:
philz 6
Click to expand...
Click to collapse
OK now we will try something else
OK now to be clear if you dont install gapps SlimKat work perfect but if you install gapps craches. Now please try install ARHD or Maximus take the boot.img from Maximus,zip paste it in your fastboot folder flash it then go to recovery and flash maximus.zip then restart the phone and report.
And please flash philz 5.15.9 when you flashing the MaximusHD
Don't install anythig else

i got a new data about my problem
i somehow managed to run slimkat with gapps and found out that at the time of boot and for 5 min the battery temperature is above 65c but it comes down to 45-50c and when connected to a charger it goes more down to 27-35c
i take it that is same in all roms for me so it may be that some service is spiking the battery temperature high at boot as without gapps the phone works just fine?

spark2331995 said:
i got a new data about my problem
i somehow managed to run slimkat with gapps and found out that at the time of boot and for 5 min the battery temperature is above 65c but it comes down to 45-50c and when connected to a charger it goes more down to 27-35c
i take it that is same in all roms for me so it may be that some service is spiking the battery temperature high at boot as without gapps the phone works just fine?
Click to expand...
Click to collapse
This is normal when you the phone boot to be hot for CPU and battery

[Q] Cyanogen Recovery bootloop

Hello! I'm new at custom roms so I probably did something wrong and I'm stuck at a recovery bootloop. Firstly, I rooted my phone and unlocked the bootloader. I flash a recovery,wipe data/factory reset, wipe cache partition and installed cm-12-20150516-NIGHTLY-nicki and gapps-lp-20150222-signed. Finally, I rebooted the system . Unfortunately after that step I'm stucked in a recovery bootloop. The problem is that is cyanogen recovery not the one that I used at first so it doesn't have as an option any advanced (in order to do wipe dalvik cache) Can anyone please help me?

turtlish said:
Hello! I'm new at custom roms so I probably did something wrong and I'm stuck at a recovery bootloop. Firstly, I rooted my phone and unlocked the bootloader. I flash a recovery,wipe data/factory reset, wipe cache partition and installed cm-12-20150516-NIGHTLY-nicki and gapps-lp-20150222-signed. Finally, I rebooted the system . Unfortunately after that step I'm stucked in a recovery bootloop. The problem is that is cyanogen recovery not the one that I used at first so it doesn't have as an option any advanced (in order to do wipe dalvik cache) Can anyone please help me?
Click to expand...
Click to collapse
i think u shuld use FOTA !!!

Hey! Thanks for helping me... Excuse me but what is FOTA? I flashed clockworkmod recovery so I did wipe it but still It didn't work... I reinstalled but had the same problem...

turtlish said:
Hey! Thanks for helping me... Excuse me but what is FOTA? I flashed clockworkmod recovery so I did wipe it but still It didn't work... I reinstalled but had the same problem...
Click to expand...
Click to collapse
Flash FOTA kernel after flashing cm12 or any rom

thanks
it worked for me

It works. !
Thanks you :good: :good: :good:

My GT-N5100 stuck on CyanogenMod 13 Animation Boot

Hey i flashed the CM-13 on my GT-N5100. At first, it worked well. I can even installed GApps package and changed the theme. Then i tried to install SuperSU and it asked to install the SU binary. So i installed it using flash recovery. It succeed, but when i tried to reboot the phone, it stucked on the "marshmallow" animation boot. I have tried to wipe data and cache, but those didn't work. Then i tried to re-install the CM-13 package (using flash recovery ofc) but it just showed an error message. What should i do? I'm planning to downgrade the phone back to Kitkat. Would it do? Or is there any other way? Please help. Thanks!

hyemun01 said:
Then i tried to install SuperSU and it asked to install the SU binary. So i installed it using flash recovery. It succeed, but when i tried to reboot the phone, it stucked on the "marshmallow" animation boot. I have tried to wipe data and cache, but those didn't work.
Click to expand...
Click to collapse
Hi
had the same problem yesterday, i found no other way as to make a complete wipe (including SYSTEM!) in TWRP and then without rebooting install the ZIP again. Than it was resurrected.
But make sure that the ROM Zip is on the external sd card.
The problem is the SuperSU, just use the internal Root function.

Still not booting after installed new OS 'stock or custom rom' Z00ED zenfone 2

Hi Guys.
im new here. hoping you guys can help me.
i accidentally wipe may system and i dont have any backups.
i try installing (lineage-14.1-20161229-UNOFFICIAL-audahadi-Z00ED)
and (Z00E_MM_13.10.7.1_Optimised_22062016)
any one of them installed success fully Via TWRP
First the (LineAge) then i wipe cache and data. and i try to reboot. but still can't boot:crying:
second one the (Z00E_MM) of course i wipe all first even data and reboot (twrp says no OS installed)
then i flash via flashboot(CMD) TWRP.img and reboot again to enter TWRP
then install boot.img and the ROM (Z00E_MM) and it successed.
and try rebooting it again via TWRP...
But Still Not Booting.:crying::crying:
what did i miss?? please Help me..:crying: