On/Off Switch replacement - Moto G Accessories

Dear,
I am here to clarify a thing.
I am using moto g 1st gen.
On/off switch on pcb got separated.
Can the switch can be re-soldered in the board again ?

arunkumarunicorn said:
Dear,
I am here to clarify a thing.
I am using moto g 1st gen.
On/off switch on pcb got separated.
Can the switch can be re-soldered in the board again ?
Click to expand...
Click to collapse
yes you can replace it. but go to local professional mobile hospital

I did it man.
Cost 150Rs.

Same happened to me!
What a pain in the arse. I am using Slim-Rom and a couple of options are available that have helped me overcome this inconvenience and may be available on others.
My path: Settings > Display there I find settings for Sleep , Volume Rocker Wake, Wake Upon Charge.
Since there is no way to turn the screen off, I set the device to sleep after 15 seconds of inactivity.
To turn it on, I allow the volume rocker to wake the device and if available, wake upon charge. This turns the device screen on when the charging cable is plugged in.
I know there is nothing better than the On/Off switch but I hope these little workarounds help you out.

knock knock in any kernel or cm ambient display and knock knock on statusbar on lock.
Ambient display and knock knock on statusbar on lock is in cm13 settings that i am using now, on gestures . knock knock is the best choice for you and can you find in some kernels. Knock knock on homescreen can be found in launcher settings on some launchers.

Chicknhawk said:
What a pain in the arse. I am using Slim-Rom and a couple of options are available that have helped me overcome this inconvenience and may be available on others.
My path: Settings > Display there I find settings for Sleep , Volume Rocker Wake, Wake Upon Charge.
Since there is no way to turn the screen off, I set the device to sleep after 15 seconds of inactivity.
To turn it on, I allow the volume rocker to wake the device and if available, wake upon charge. This turns the device screen on when the charging cable is plugged in.
I know there is nothing better than the On/Off switch but I hope these little workarounds help you out.
Click to expand...
Click to collapse
I guess Slim ROM has double tap to turn off the screen functionality. Or use gravity screen app and turn the display on and off automagically. It uses proximity and/or accelerometer.

Related

Ear touches the screen in a call

Hey, everytime I am in a call, my ear taps the taskbar and it opens the notification window which covers my call screen. I have googled and searched this forum with no success.
Apart from TouchLockPro, was just curious as to if there is anything that addresses this issue?
Thanks in advance.
Do you have something (case?) blocking the proximity sensor? The screen should be turning off as soon as you put the phone to your ear.
Yes I do. I've just tested it out, that seems to be the problem. So is there any tweak to prevent this?
i know even with the screen turning off with the proxy censor i will find i am in the screen with the connections and battery info when i am done with a call... its kind of annoying and worrys me a bit i might accadently end the call when the screen is off.... also the flip over to make it a confrence phone is a 50/50 thing... this device is so glitchy
I randomly get this too, I think sometimes the sensor isn't used.. There are times I've noticed I can cover it up completely with my thumb and the screen doesn't go off, but other times it works just fine.
Ryryq said:
Yes I do. I've just tested it out, that seems to be the problem. So is there any tweak to prevent this?
Click to expand...
Click to collapse
Tweak...some testing to see where the sensor is (somewhere along the top near the HTC logo) and an X-acto knife to the case?
same thing happens to me, most of the time somehow I turn on airplane mode and the call disconnects.. sigh
TouchLockPro has a feature which turns the screen off using the G-sensor, but it's not just for calls, if you have it horizontal it'll be on, and if vertical it suspends/screen turns off; this would be good if it was just for calls, especially for those that use a case.
I'm just starting to use TouchLockPro (http://forum.xda-developers.com/showthread.php?t=444215) and I have most of the locking features turned off - I just hit the power button if I want to lock it.
It does keep the screen locked during a call so I no longer hit the buttons. Plus - when it unlocks I'm right back, exactly, where I left off.
There's lots of options to tweak, I think there's something for just about everyone.
I LOVE unlocking with the zoom bar - first time I've used that thing on my phone
~Eric
eknutson said:
I'm just starting to use TouchLockPro (http://forum.xda-developers.com/showthread.php?t=444215) and I have most of the locking features turned off - I just hit the power button if I want to lock it.
It does keep the screen locked during a call so I no longer hit the buttons. Plus - when it unlocks I'm right back, exactly, where I left off.
There's lots of options to tweak, I think there's something for just about everyone.
I LOVE unlocking with the zoom bar - first time I've used that thing on my phone
~Eric
Click to expand...
Click to collapse
Awesome. Mind sharing what settings you have enabled, please?
Sure
Light Sensor, Stylus Sensor, GSensor, Nav Sensor, :
Nothing checked (all disabled)
Keyboard:
Use Slider, Suspend On Slider In, Slider Out Disables LockMode and EnableInputAtSuspend are all checked, everything else is un-checked (HTC Lock API, Double TouchPanel Lock and KeepAliveAlways are un-checked.
BattClock:
just some preferences set for appearance
Telephone API:
Everything is checked (except light)
Software:
Nothing set up
Other Settings:
AutolockOnPowerOn and UnlockOnACPower are checked, everything else is un-checked (added vibrates Lock/Unlock once - I like the extra notification)
~Eric
thanks! works like a charm now, is there any way to lock it if it is idle for like 30 secs or something without havin to hit the power button
There's a number of ways to lock it using the various sensors - you can try one of those and see what fits your habits / style best. You can also click on the BattClock icon to get the menu - the lock icon is right there. That's 2 steps though...
~Eric

[Q] Moto 360 [5.1.1] Stay Awake While Charging...

Can't find another question like this one... so here goes:
Just got a Moto 360 for 149.99 USD and its great so far.
Did that force update to 5.1.1, this one worked for me: https://www.reddit.com/r/moto360/comments/3ahj1l/a_surefire_way_to_force_the_511_update/
Now I look into turning off the screen when its charging, only to run into a very strange issue...
In the developer options, which you can enable using 10 taps on the build number in about, there are two options:
1) stay awake while charging
2) burn-in protection
Burn-in protection will NOT save the check when your restart, so in essence, is useless.
However I found that using stay awake while charging DOES indeed turn off the screen, but here's the catch: you have to set it to ENABLED.
Don't believe I have ever seen a setting on android that required it to be on, to be off...
But hey, it does work, on mine at least.
Also the whole "just hit the button to make the screen go off" ONLY works in Theater Mode! And I personally dont like pushing a button to check the time.
If Theater Mode is off, it will just brighten the screen for around 2 seconds, then dim again.
Here's my question, what does that burn-in protection do anyways? Just pixel shift over time? Why can't it be enabled?
Hope this helps some people!
that setting does nothing for me
the screen stays awake regardless of ENABLED or DISABLED
funny how motorola hasn't fixed this yet
just put watch in "Theater mode" before charging
and it would switch the screen off on charger too
da_coder said:
Can't find another question like this one... so here goes:
Just got a Moto 360 for 149.99 USD and its great so far.
Did that force update to 5.1.1, this one worked for me: https://www.reddit.com/r/moto360/comments/3ahj1l/a_surefire_way_to_force_the_511_update/
Now I look into turning off the screen when its charging, only to run into a very strange issue...
In the developer options, which you can enable using 10 taps on the build number in about, there are two options:
1) stay awake while charging
2) burn-in protection
Burn-in protection will NOT save the check when your restart, so in essence, is useless.
However I found that using stay awake while charging DOES indeed turn off the screen, but here's the catch: you have to set it to ENABLED.
Don't believe I have ever seen a setting on android that required it to be on, to be off...
But hey, it does work, on mine at least.
Also the whole "just hit the button to make the screen go off" ONLY works in Theater Mode! And I personally dont like pushing a button to check the time.
If Theater Mode is off, it will just brighten the screen for around 2 seconds, then dim again.
Here's my question, what does that burn-in protection do anyways? Just pixel shift over time? Why can't it be enabled?
Hope this helps some people!
Click to expand...
Click to collapse
It started on mine, in the dock. Every few minutes everything on the display jumps in size from small to large and vice visa
The staying awake feature is backwards. Crazy
Sent by entanglement.
I restarted mine after setting to enabled, also ambient / theater mode are both off.
Hi,
as ShadowVlican wrote: just enable the theater mode to switch the screen off during charging. It is also important, the you undo any changes you did in the developer menu ("stay awake while charging" and the "burn in protection" as well).
Stephan
cyvr1 said:
Hi,
as ShadowVlican wrote: just enable the theater mode to switch the screen off during charging. It is also important, the you undo any changes you did in the developer menu ("stay awake while charging" and the "burn in protection" as well).
Stephan
Click to expand...
Click to collapse
Yeah, no. My screen turns off for 10 seconds then just becomes dim black with backlight again.
Is there no damn working solution?!

Anyone have Gravity Screen - On/Off working on the G4?

I have the Verizon LG G4 vs986 running 5.1 (10b) but I've been unable to get Gravity Screen - On/Off 2.3.1 to work as it's not turning the screen off. Does anyone have this working on the G4 and can you share your settings? Thanks!
Almighty1 said:
I have the Verizon LG G4 vs986 running 5.1 (10b) but I've been unable to get Gravity Screen - On/Off 2.3.1 to work as it's not turning the screen off. Does anyone have this working on the G4 and can you share your settings? Thanks!
Click to expand...
Click to collapse
Been using it since the beginning (and G3 as well). After removing Power Nap Alpha 0.7 working flawless. Have you enabled Administrative Permissions?
Yes, enabled that. Can you let me know how you have the settings for the program setup? I was able to get the screen to go off once when I first installed it but never could get the screen to turn on and I have the PIN enabled lock screen.
Almighty1 said:
Yes, enabled that. Can you let me know how you have the settings for the program setup? I was able to get the screen to go off once when I first installed it but never could get the screen to turn on and I have the PIN enabled lock screen.
Click to expand...
Click to collapse
On
Any Direction = Check
Lying Face up= Check
Turn off by proximity = Check
Turn on by proximity = Check
Keep screen on by Motion = Check (sensitivity 70)
Booster = Check
Running During Call = Check
Notification = Check
Low Priority = Check
Start at boot = Check
I have the unlocked version so I also have some apps whitlisted
Device Administrator = Check (for both delayed lock and regular screen off permission, 2 separate)
All the rest I have UNCHECKED
Thanks! Think you covered everything except what do you have for the following settings:
Pocket Sensor Angle
Landscape mode
Table Sensor Angle
Turn Screen ON by Motion-Timeout
Turn Screen ON by Motion-Sensitivity
False Turn-On Protection in Pocket
It seems my screen is turning off because of the 15 second display timeout in the phone settings and not because of Gravity, what do you have for the phone's display timeout settings? I changed it to always keep display on and the screen does go off, but doesn't turn on until I tap the screen.
Is the screen supposed to turn on by itself or does one have to tap the screen?
Almighty1 said:
Thanks! Think you covered everything except what do you have for the following settings:
Pocket Sensor Angle
Landscape mode
Table Sensor Angle
Turn Screen ON by Motion-Timeout
Turn Screen ON by Motion-Sensitivity
False Turn-On Protection in Pocket
It seems my screen is turning off because of the 15 second display timeout in the phone settings and not because of Gravity, what do you have for the phone's display timeout settings? I changed it to always keep display on and the screen does go off, but doesn't turn on until I tap the screen.
Is the screen supposed to turn on by itself or does one have to tap the screen?
Click to expand...
Click to collapse
Pocket sensor = 60 (default I think, it becomes inactive with Any direction checked)
Landscape mode = Unchecked
Table sensor angle = 2
Turn on by motion = Unchecked
Keep On by motion sensitivity = 70
I don't have a false turn on protection in pocket option
Screen timeout = 15 seconds
On my device T Mo G4 H811 no tapping of screen required, all screen on and off functions are performed by Gravity (every now and then it doesn't read the proximity sensor, but 99% of the time it functions as it should).
The default setting should have gotten you working, all these setting are more of a fine tuning to your liking rather than actual functionality of the app itself. Have you tried uninstalling, reboot and reinstalling? Proximity sensor working? Not sure what else you can do other than contact the developer. I had and issue a couple versions ago and it was addressed fairly quickly with an update (I'm sure I wasn't the only one in that case).
Hope this helps you out.
I think once you select Any Direction (Flip Cover), the angles for both Pocket Sensor and Table Sensor becomes inactive, Turn Screen OFF by Proximity becomes inactive as well. I actually figured out the problem as it was the app that was turning the screen off but I am running Power Nap as well which puts the phone in deep sleep mode so I had to add GS to the exclude list in Power Nap before GS worked correctly and turned the screen back on. I already tried uninstalling from the app, rebooting and installing earlier but the problem was Power Nap. I have the unlocked version and it does have the false turn on protection option which is the last option under the Turn Screen ON by Motion section.
Almighty1 said:
I think once you select Any Direction (Flip Cover), the angles for both Pocket Sensor and Table Sensor becomes inactive, Turn Screen OFF by Proximity becomes inactive as well. I actually figured out the problem as it was the app that was turning the screen off but I am running Power Nap as well which puts the phone in deep sleep mode so I had to add GS to the exclude list in Power Nap before GS worked correctly and turned the screen back on. I already tried uninstalling from the app, rebooting and installing earlier but the problem was Power Nap. I have the unlocked version and it does have the false turn on protection option which is the last option under the Turn Screen ON by Motion section.
Click to expand...
Click to collapse
Yeah... Power Nap. Loved it on the G3 but on this phone it still has some issues. I stopped using it because even though I whitelisted certain apps some of those whitelisted apps actually weren't being allowed to remain active. Gravity wasn't one of them but Root call blocker was and boy was that a treat at times.
Glad you got it worked out.
zoman7663 said:
Yeah... Power Nap. Loved it on the G3 but on this phone it still has some issues. I stopped using it because even though I whitelisted certain apps some of those whitelisted apps actually weren't being allowed to remain active. Gravity wasn't one of them but Root call blocker was and boy was that a treat at times.
Glad you got it worked out.
Click to expand...
Click to collapse
Interesting, how do you check if the app is active or not since the screen is off?
Almighty1 said:
Interesting, how do you check if the app is active or not since the screen is off?
Click to expand...
Click to collapse
Trial and error... Root Call Blocker worked fine (whitelisted) when the screen was on but failed to work when screen off. What turns off my apps when screen off? Power Nap. Disable Power Nap and Root Call Blocker worked fine (screen on and off). So my conclusion was Power Nap even though whitelisted Root Call Blocker was failing to leave that app active.
zoman7663 said:
Trial and error... Root Call Blocker worked fine (whitelisted) when the screen was on but failed to work when screen off. What turns off my apps when screen off? Power Nap. Disable Power Nap and Root Call Blocker worked fine (screen on and off). So my conclusion was Power Nap even though whitelisted Root Call Blocker was failing to leave that app active.
Click to expand...
Click to collapse
Interesting, in my case, Powernap didn't put any app to sleep as before yesterday, my battery would last 2-2.5 hours with the screen off then I started greenifying everything except those I know that needs to run in the background and now the battery lasts 9 hours with Gravity Screen. I left White Pages ID without greenifying it.

[APP][Android 6+] Ambi-Turner - wake up ambient display

I've created an app that wakes ambient display when you take the phone out of your pocket or if you have the phone face down and turn it over. The app is in addition to Google's ambient display and does not change your lock screen in anyway.
I added a few other paid features for lift to unlock, wave to unlock, pulsing at an interval, and battery percentage display on the ambient display.
I have a thread going on the Pixel XL forums and a number of people have been testing it out. I think it's stable enough to start spreading the word.
Please let me know if you have any suggestions or run into any problems. Thank you!
Check it out: https://play.google.com/store/apps/details?id=com.compass.ambiturner
I'm interested, but it appears your link is dead.
Edit: found it in play store. Went ahead and got pro for lift to wake.
Atemi1337 said:
I'm interested, but it appears your link is dead.
Edit: found it in play store. Went ahead and got pro for lift to wake.
Click to expand...
Click to collapse
Thank you! I fixed the link...cut and paste truncated the link.
I'm testing it since four days and can absolutely recommend it.
No battery drain here at all. Proper functionality and even more options with every new version.
Keep up the great work.
Edit: do you have PayPal? I'm gonna hook you up with a beer.
Melecatius said:
I'm testing it since four days and can absolutely recommend it.
No battery drain here at all. Proper functionality and even more options with every new version.
Keep up the great work.
Edit: do you have PayPal? I'm gonna hook you up with a beer.
Click to expand...
Click to collapse
Haha, thank you. The app support is more than enough thanks!
Just bought the pro version. Coming from a note 7 and missing that ambient display, this great app will do.
Looks great.
Thank you very much sir
Trying it on a Nexus 6p. So far i'm loving it.
Bought pro, thanks!
So I've done some limited testing with the app white listed from doze and so far it improves the responsiveness significantly. I don't know the battery impacts yet, but if it's not noticeable I'll add code to prompt users to white list it.
Other upcoming changes:
Advanced settings to adjust wait times for how long the phone has to be in your pocket or laying flat before a wake can occur.
A pulse option that initially pulses faster when a notification comes in, and progressively shows down until the timeout.
Possibly change in lock screen battery indicator appearance.
Filter on laying flat thresholds. I suspect the accelerometer incorrectly reports the phone tilted while it is laying flat on occasion.
Just bought the Pro version, thanks for the nice app.
Unfortunately the ambient display doesn't light up on my Pixel if the phone is unlocked, e.g. by SmartLock. Typically, I have the phone lying next to me on the desk at work or at home und the phone is unlocked by location based SmartLock. This is where I would like to see incoming notifications without touching the phone. Do you think this is possible to implement?
Wrapp said:
Just bought the Pro version, thanks for the nice app.
Unfortunately the ambient display doesn't light up on my Pixel if the phone is unlocked, e.g. by SmartLock. Typically, I have the phone lying next to me on the desk at work or at home und the phone is unlocked by location based SmartLock. This is where I would like to see incoming notifications without touching the phone. Do you think this is possible to implement?
Click to expand...
Click to collapse
I'll look into that. I've got an idea that may work.
grokus said:
I'll look into that. I've got an idea that may work.
Click to expand...
Click to collapse
For me wave to wake works with smart lock in my home.
Taebom said:
For me wave to wake works with smart lock in my home.
Click to expand...
Click to collapse
Doesn't work for me.
More important (maybe only for me): the screen doesn't light up without interaction if the phone is unlocked by smartlock. That's the same behavior as with the ROM build in ambient display feature. It only lights up the screen when the phone is locked.
Thanks a lot for looking into that. This would overcome the disappointing original Google ambient display implementation!
If i can help somehow (testing,...) please let me know.
Wrapp said:
Doesn't work for me.
More important (maybe only for me): the screen doesn't light up without interaction if the phone is unlocked by smartlock. That's the same behavior as with the ROM build in ambient display feature. It only lights up the screen when the phone is locked.
Thanks a lot for looking into that. This would overcome the disappointing original Google ambient display implementation!
If i can help somehow (testing,...) please let me know.
Click to expand...
Click to collapse
Do you still have ambient display enabled in settings? Mine is working with the location smart lock turned on and ambient display enabled.
grokus said:
Do you still have ambient display enabled in settings? Mine is working with the location smart lock turned on and ambient display enabled.
Click to expand...
Click to collapse
Tested again..
Ambi-turner enabled.
In display settings
Ambient display : on
Display timeout : 15sec
Security settings:
Pin lock screen after 10min
On/off button locks immediately
(I'm not on an English version, hope the translations are understandable)
The phone is in an area where is unlocked by location based smartlock.
Test 1: wait for 15sec until the screen switches off, wait another minute, send me an WhatsApp from 2nd phone: i hear the notification sound, screen doesn't turn on. If i turn on the display using the on/off button i am on the home screen.
Test 2: switch off the screen by on\off button, (i can hear the lockscreen notification) and send me a WhatsApp from another phone. I hear the notification sound, screen turns on and shows the message. If i turn on the phone by on/off button I'm on the lock screen.
Pixel, version NDE63H
Just bought pro - nice job!
I' ve just tested it on my Nexus 5 with PureNexus 6.0.1 rom. PN has ambient display function in settings but it doesn't work because Nexus 5 doesn't have pick up sensors or pocket sensors. Therefore I've been looking for some solution how to wake it, for example cmactions-wave to wake or similar. For the previous period I've been using GravityBox but it's battery hungry.
I see now that ambi-turner works also, so testing it ATM...
nice work...
jazzh said:
I' ve just tested it on my Nexus 5 with PureNexus 6.0.1 rom. PN has ambient display function in settings but it doesn't work because Nexus 5 doesn't have pick up sensors or pocket sensors. Therefore I've been looking for some solution how to wake it, for example cmactions-wave to wake or similar. For the previous period I've been using GravityBox but it's battery hungry.
I see now that ambi-turner works also, so testing it ATM...
nice work...
Click to expand...
Click to collapse
Thank you. I'm posting an update soon. I'm testing a new mechanism that is waking the screen up much more reliably than the current version.

Question Screen Wakes Up When Barely Moved

Hey Guys,
So something very annoying I've noticed so far since owning this phone. I could have it laying on the table/counter, whatever. I have lift to wake and any other motion related setting to turn the screen on disabled, however, if I so much as nudge my phone while it's sitting the screen will always wake. Does this happen to anyone else? Is there some other hidden setting I've yet to disable and need to? Is it a glitch or something? Appreciate any ideas or suggestions.
Thanks!
You are not the only one observing this behavior. I believe it's a software glitch. It's has been mentioned on other forums as well.
I don't think it's a glitch. People have said the "fix" is to turn off fingerprint option. So I'm thinking it's actually a feature to turn on the screen so it's ready for your finger print. It's different than lift to wake because it only shows the Always On Display. Lift to wake, goes past the Always On Display and to the lock screen. I've tested it in my pocket and it's stays fully off.
EeZeEpEe said:
I don't think it's a glitch. People have said the "fix" is to turn off fingerprint option. So I'm thinking it's actually a feature to turn on the screen so it's ready for your finger print. It's different than lift to wake because it only shows the Always On Display. Lift to wake, goes past the Always On Display and to the lock screen. I've tested it in my pocket and it's stays fully off.
Click to expand...
Click to collapse
It's a feature not a bug
There is doze_quick_pickup_gesture option that you can set via adb. Just setup adb shell (google how to do it if you don't have it), then enable developer options on your phone (google it too), then connect your phone to your PC and execute this command in the shell:
shell settings put secure doze_quick_pickup_gesture 0
It worked for me! Borrowed from here:
Google Pixel 6/6 pro screen wakes up automatically? - Google Pixel Community
sb283 said:
shell settings put secure doze_quick_pickup_gesture 0
Click to expand...
Click to collapse
You absolute beast, thanks!
The easiest fix is to turn off adaptive sound
manueltimz said:
The easiest fix is to turn off adaptive sound
Click to expand...
Click to collapse
Interesting. I noticed that my AOD is always on, even though I have set it to be disabled when charging.
Maybe Adaptive Sound has something to do with that? 'Cuz I enabled that.
Morgrain said:
Interesting. I noticed that my AOD is always on, even though I have set it to be disabled when charging.
Maybe Adaptive Sound has something to do with that? 'Cuz I enabled that.
Click to expand...
Click to collapse
Yes i think its a bug when adaptive sound is on and it hears loud sounds, ot turns the screen on. Just try banging the desk or hitting two spoons when near your phone with adaptive sound on and off... The screen lights up when its ON bit doesn't when its off
I am having just the opposite effect. I lift my phone and nothing happens. I have to click my power button for it to go on sometimes.
If you refer to Lift to check BLACK SCREEN It is a feature for easy to use fingerprint so that very helpful for me
pettigrew95 said:
Hey Guys,
So something very annoying I've noticed so far since owning this phone. I could have it laying on the table/counter, whatever. I have lift to wake and any other motion related setting to turn the screen on disabled, however, if I so much as nudge my phone while it's sitting the screen will always wake. Does this happen to anyone else? Is there some other hidden setting I've yet to disable and need to? Is it a glitch or something? Appreciate any ideas or suggestions.
Thanks!
Click to expand...
Click to collapse
Check out #9
Can't disable Lift To Wake
The screen turns on when I lift the phone. (Black and white lock screen.) "Lift to wake" and "Tap to Check" are both off.
forum.xda-developers.com
sb283 said:
There is doze_quick_pickup_gesture option that you can set via adb. Just setup adb shell (google how to do it if you don't have it), then enable developer options on your phone (google it too), then connect your phone to your PC and execute this command in the shell:
shell settings put secure doze_quick_pickup_gesture 0
It worked for me! Borrowed from here:
Google Pixel 6/6 pro screen wakes up automatically? - Google Pixel Community
Click to expand...
Click to collapse
This worked perfectly, thanks so much! Quick question, is there any negative or other effects this has? Thanks again.
pettigrew95 said:
This worked perfectly, thanks so much! Quick question, is there any negative or other effects this has? Thanks again.
Click to expand...
Click to collapse
I haven't noticed any, around 24 hrs later.
manueltimz said:
The easiest fix is to turn off adaptive sound
Click to expand...
Click to collapse
If a moth farts 2 miles away causing the slightest vibration my screen comes on and i have adaptive sound, lift to wake and AOD disabled.

Categories

Resources