Related
Hi Mates! After A Very-Very Long Time I Am Back On XDA. This Time I'm Using A Xolo Q1000 Which Is A Rebrand Of Cherry Mobile OHD 2.0 & Symphony w140 :good: So, Here The Stock Collection For These Devices. Enjoy Pals!
.
.
.
IMPORTANT NOTICE: I Am Not Responsible For Bricked Devices, Dead SDCards And Other Hazards. Try @ Your Own Risk..!
Stock Bootlogos:
Xolo Q1000: http://is.gd/LygEwk
Cherry Mobile OHD 2.0: http://is.gd/ZYPmGD
Symphony w140: http://is.gd/lmWTdS
Tutorial: Flash Via CWM/TWRP.
Stock Recovery:
For Build 49 Users:
Stock Recovery_49 --> http://goo.gl/f6FxGO
For Build 7 Users:
Stock Recovery_7 --> http://goo.gl/xEYc1u
NOTE: If You're Confused Which One To Use On Your Xolo Q1000 & Symphony w140 Then Try Both Of These. Anyone Will Definately Work.
TUTORIAL:
1. Download MobileUncle Tool --> http://goo.gl/wYgPbu
2. Download Suitable Recovery From Above.
3. Rename It To recovery.img
4. Put It On The Root Of The SDCard.
5. Open MobileUncle Tool.
6. Tap On Recovery Update.
7. Navigate To The recovery.img
8. Select The Recovery.
8. Then Reboot To Recovery
9. Done!
Stock ROMs:
Xolo Q1000: www.d-h.st/M92
Cherry Mobile OHD 2.0 Build 49: http://is.gd/U6oQKN
Cherry Mobile OHD 2.0 Build 7: Wiil Be Posted Soon :highfive:
Symphony w140: http://is.gd/oHSwsR [Needs SignUp]
Flash Via SP Flash Tools..!!
Please Hit Thanks If I Helped You All :victory:
Reserved
Cherry Mobile OHD 2.0 Build 49: file is corrupt
Question about CM Omega 2.0
sir do you have Stock rom for build18 >?
---------- Post added at 08:28 AM ---------- Previous post was at 08:25 AM ----------
robin.kang63 said:
Cherry Mobile OHD 2.0 Build 49: file is corrupt
Click to expand...
Click to collapse
you should try extracting it with Winrar
because its packed with it.
My microusb port not working..Any way to flash xolo rom ???
ROM Features :-
Completely Android 4.4.4 Kitkat ROM
Based on Unofficial CM11 Port
No Bugs at all
Both SIM Working
3G Working
Regular OTA Updates
Improved Call Quality
CM11 Custom Themes Support
CM Settings UI, Launcher, Lock Screen and lots more
No Bloatwares
Built in CM Android 4.4.4 Kernal
Stable Build
Pre-Rooted
More Free RAM
Installable with CWM/TWRP Recovery
Source: thebroodle
Changes which I have made in the rom
1) Most of the time you get 500-550 MB ram free after cleaning your task manager.
2) All Chinese bloatware were removed and some live wall paper were removed as they were consuming much RAM.
3) Pre rooted and adblock binary installed for ad removing.
4) Added multiling keyboard which consume very low ram and removed chinese keyboard.
5) Pre installed soft key.
Installing mekoo ROM on your bricked or unbricked Redmi 1s (Indian snapdragon version ) through CWM recovery.
Step 1: download “MK44.4_Armani_moded_201409220004-UNOFFICIAL".
Step 2: Connect your mobile copy your ROM zip file in your SDcard1(Memory Card).
Step 3: Switch off your mobile and start your mobile in CWM recovery mode by pressing ( Volume up + Power ) key combination.
Step 4: Wipe cache partition.
Step 5: Select install zip option -> choose zip from sdcard and locate your ROM file and select that file for installation.
Step 6: wipe data/factory reset.
Step 7: Reboot system now.
Mod Edit: Links removed. OP, please reply to your PMs about this ROM...thanks!
Thanks brother ..... is it 25-09 build ?
Does this Rom comes with apps2Sd?
Sent from my LG-D855 using XDA Free mobile app
This is not a Kitkat 4.4.4 ROM
this is not a Kitkat 4.4.4 ROM...
the About Phone is still showing Android Version 4.3 JLS36C
The download link downloads this file: Custom_Redmi_1S_Rom_XDA_v37.zip
Sorry for wrong link the rom which which you are using is customised by me now the link have changed for mokee rom download
:good: Press thanks button
All about Redmi 1s rooting, custom rom installation, upgrading to kitkat
Check my other threads about Redmi 1s rooting, custom rom installation, upgrading to kitkat
Mokee ROM For Xiaomi Redmi 1S - Android 4.4.4 Indian version
http://forum.xda-developers.com/android/general/mokee-rom-xiaomi-redmi-1s-android-4-4-4-t2886275
custom cyanogenmod android 4.4 ROM for redmi 1S with preinstalled xposed framework
http://forum.xda-developers.com/android/general/custom-cyanogenmod-android-4-4-rom-t2888971
Custom rom xiaomi redmi 1s indian version
http://forum.xda-developers.com/android/general/custom-rom-xiaomi-redmi-1s-indian-t2882604
Unbrick Redmi 1s unbrick (indian version) rooting, installing CWM & custom ROM guide
http://forum.xda-developers.com/android/general/redmi-1sindian-version-unbricking-t2882369
Root redmi 1S (Indian version) with SuperSU installed (No native root method)
http://forum.xda-developers.com/android/general/root-redmi-1s-indian-version-supersu-t2881416
:good:Press :good: Thanks button if I have helped You
which are the bugs?
Which are the bugs or this ROM?:good:
Hi, Dev.
I tried flashing your ROM, I got it working too. But there is some issue with few apps, They say "SD card is read/write protected"
2) Major problem is that, If i switch off or i try to reboot from power menu, Its a perfect boot loop. And if it boots after removing battery and trying lots of times all apps are gone, apps which are in data/app i:e user apps.
I flashed Kitkat CM11 and yours also both of the rom gave me this issue, I am a bit confused here coz i flashed ROM with CWM recovery, Is there any problem with recovery coz i did not find TWRP earlier, And now i flashed stock ROM somehow and m afraid to flash ROM till i can here something from any dev here.
Thank you.
internet not working
I tried all the ROM but i am not able to grt the net neither 2g or 3g .please sugggest whats wrong.
azimdotnet said:
ROM Features :-
Completely Android 4.4.4 Kitkat ROM
Based on Unofficial CM11 Port
No Bugs at all
Both SIM Working
3G Working
Regular OTA Updates
Improved Call Quality
CM11 Custom Themes Support
CM Settings UI, Launcher, Lock Screen and lots more
No Bloatwares
Built in CM Android 4.4.4 Kernal
Stable Build
Pre-Rooted
More Free RAM
Installable with CWM/TWRP Recovery
Source: thebroodle
Changes which I have made in the rom
1) Most of the time you get 500-550 MB ram free after cleaning your task manager.
2) All Chinese bloatware were removed and some live wall paper were removed as they were consuming much RAM.
3) Pre rooted and adblock binary installed for ad removing.
4) Added multiling keyboard which consume very low ram and removed chinese keyboard.
5) Pre installed soft key.
Installing mekoo ROM on your bricked or unbricked Redmi 1s (Indian snapdragon version ) through CWM recovery.
Step 1: download “MK44.4_Armani_moded_201409220004-UNOFFICIAL".
Step 2: Connect your mobile copy your ROM zip file in your SDcard1(Memory Card).
Step 3: Switch off your mobile and start your mobile in CWM recovery mode by pressing ( Volume up + Power ) key combination.
Step 4: Wipe cache partition.
Step 5: Select install zip option -> choose zip from sdcard and locate your ROM file and select that file for installation.
Step 6: wipe data/factory reset.
Step 7: Reboot system now.
Download Link
https://drive.google.com/file/d/0B6sbFLTmSeVHZC1qMWx0ZElSUmM/edit?usp=sharing
Now install google apps mini version zip by updating through recover its only 56MB
Download link given below
https://drive.google.com/file/d/0B6sbFLTmSeVHZUgxaEhGelczaHc/edit?usp=sharing
Press :good: Thanks button if it helps
Click to expand...
Click to collapse
azimdotnet said:
Check my other threads about Redmi 1s rooting, custom rom installation, upgrading to kitkat
Mokee ROM For Xiaomi Redmi 1S - Android 4.4.4 Indian version
http://forum.xda-developers.com/android/general/mokee-rom-xiaomi-redmi-1s-android-4-4-4-t2886275
custom cyanogenmod android 4.4 ROM for redmi 1S with preinstalled xposed framework
http://forum.xda-developers.com/android/general/custom-cyanogenmod-android-4-4-rom-t2888971
Custom rom xiaomi redmi 1s indian version
http://forum.xda-developers.com/android/general/custom-rom-xiaomi-redmi-1s-indian-t2882604
Unbrick Redmi 1s unbrick (indian version) rooting, installing CWM & custom ROM guide
http://forum.xda-developers.com/android/general/redmi-1sindian-version-unbricking-t2882369
Root redmi 1S (Indian version) with SuperSU installed (No native root method)
http://forum.xda-developers.com/android/general/root-redmi-1s-indian-version-supersu-t2881416
:good:Press :good: Thanks button if I have helped You
Click to expand...
Click to collapse
Very gud work bro... Thank u very much for all your awsm work
Update problem
I tried to install OTA update but an error poped up in cwm it was showing something like (status 7) please tell me what's wrong with it and sorry for this noob questionn
Thread closed over confusion about whether it is KK or not.
[UNOFFICIAL][AOSP][KitKat 4.4.2] Cherry Mobile OMEGA HD 2.0 & Lava Xolo Q1000
WARNING: I or xda is not responsible for any kind of damage to your device. Please use it at your own risk!
Feature(s):
- Based on AOSP KitKat 4.4.2
- Custom Kernel 3.4.67
- 13MP main camera & 3MP front camera
- SuperSU v2.46 pre-installed
- BusyBox pre-installed
- init.d supported
- MTP & mass storage mode supported
- And many more...
Credit(s):
- @hyperion70 (Original thread)
- @sai3811
- @Santhosh M
- @MasterAwesome
- @Dr-Shadow
- @superdragonpt
- 4PDA
- XDA
- bq (Aquaris 5 HD kernel source)
- Others not mentioned but also contributed to my worked
Important Note(s):
- Do not update/replace pre-installed BusyBox.
How to install/upgrade from JB to KK:
- Download and install MediaTek MT65xx PreLoader USB VCOM Port
- Download SP Flash Tool v3.1344.0.212
- Download Firmware
- Extract downloaded archive(s) SP Flash Tool and firmware
- Open SP Flash Tool (Flash_Tool.exe)
- Click Scatter-loading button and navigate to the extracted firmware folder
- Load MT6589_Android_scatter_emmc.txt file
- Change UBOOT to match device build (included the the archive)
- Click Firmware -> Upgrade button
- Turn off device, plugin USB cable to phone and PC
- Wait for the process to finish
- After flashing boot to recovery mode by pressing the volume up + power at the same time
- Select Wipe Data and Format Options
- Do Factory Reset
- Reboot device
Download:
- Dev-Host
Flashable Zip via Recovery: (This is for fast flashing or restore only. Be sure you already performed the above upgrade from JB to KK using SP Flash tool before using this flashable zip to avoid any issues.)
- Dev-Host
XDA:DevDB Information
[UNOFFICIAL][AOSP][KitKat 4.4.2] Cherry Mobile OMEGA HD 2.0 & Lava Xolo Q1000, ROM for the Lava Xolo Q1000
Contributors
remzej, Hyperion70
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Stable
Created 2015-03-08
Last Updated 2015-03-07
remzej said:
[UNOFFICIAL][AOSP][KitKat 4.4.2] Cherry Mobile OMEGA HD 2.0 & Lava Xolo Q1000
WARNING: I or xda is not responsible for any kind of damage to your device. Please use it at your own risk!
Feature(s):
- Based on AOSP KitKat 4.4.2
- Custom Kernel 3.4.67
- 13MP main camera & 3MP front camera
- SuperSU v2.46 pre-installed
- Busybox pre-installed
- init.d supported
- MTP & mass storage mode supported
- And many more...
Credit(s):
- @Hyperion70 (Original thread)
- @Sai3811
- @Santhosh M
- @MasterAwesome
- @Dr-Shadow
- @superdragonpt
- 4PDA
- XDA
- bq (Aquaris 5 HD kernel source)
- Others not mentioned but also contributed to my worked
Important Note(s):
- Do not update/replace pre-installed BusyBox.
How to install/upgrade from JB to KK:
- Download and install MediaTek MT65xx PreLoader USB VCOM Port
- Download SP Flash Tool v3.1344.0.212
- Download Firmware
- Extract downloaded archive(s) SP Flash Tool and firmware
- Open SP Flash Tool (Flash_Tool.exe)
- Click Scatter-loading button and navigate to the extracted firmware folder
- Load MT6589_Android_scatter_emmc.txt file
- Click Firmware -> Upgrade button
- Turn off device, plugin USB cable to phone and PC
- Wait for the process to finish
- After flashing boot to recovery mode by pressing the volume up + power at the same time
- Select Wipe Data and Format Options
- Do Factory Reset
- Reboot device
Download:
- http://d-h.st/KNvT
Flashable Zip via Recovery: (This is for fast flashing or restore only. Be sure you already performed the above upgrade from JB to KK using SP Flash tool before using this flashable zip to avoid any issues.)
- http://d-h.st/4g9q
XDA:DevDB Information
[UNOFFICIAL][AOSP][KitKat 4.4.2] Cherry Mobile OMEGA HD 2.0 & Lava Xolo Q1000, ROM for the Lava Xolo Q1000
Contributors
remzej, Hyperion70
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Stable
Stable Release Date: 2015-03-08
Created 2015-03-08
Last Updated 2015-03-07
Click to expand...
Click to collapse
Looking forward for ur new project sir
good job sir remzej, keep up the good work
Many Thanks Sir remzej, Hoping for a Kitkat Colossus... :fingers-crossed:
Thanks you so much sir Rem zej
thanks sir for the great and hard work on our device
Nice work bro, thanks for making good ROM for our devices, downloading it.
Sir Remz,
do you have a mirror for this link? like mediafire? i can't download it here, thanks a lot... more power
remzej said:
[UNOFFICIAL][AOSP][KitKat 4.4.2] Cherry Mobile OMEGA HD 2.0 & Lava Xolo Q1000
WARNING: I or xda is not responsible for any kind of damage to your device. Please use it at your own risk!
Feature(s):
- Based on AOSP KitKat 4.4.2
- Custom Kernel 3.4.67
- 13MP main camera & 3MP front camera
- SuperSU v2.46 pre-installed
- BusyBox pre-installed
- init.d supported
- MTP & mass storage mode supported
- And many more...
Credit(s):
- @hyperion70 (Original thread)
- @sai3811
- @Santhosh M
- @MasterAwesome
- @Dr-Shadow
- @superdragonpt
- 4PDA
- XDA
- bq (Aquaris 5 HD kernel source)
- Others not mentioned but also contributed to my worked
Important Note(s):
- Do not update/replace pre-installed BusyBox.
How to install/upgrade from JB to KK:
- Download and install MediaTek MT65xx PreLoader USB VCOM Port
- Download SP Flash Tool v3.1344.0.212
- Download Firmware
- Extract downloaded archive(s) SP Flash Tool and firmware
- Open SP Flash Tool (Flash_Tool.exe)
- Click Scatter-loading button and navigate to the extracted firmware folder
- Load MT6589_Android_scatter_emmc.txt file
- Click Firmware -> Upgrade button
- Turn off device, plugin USB cable to phone and PC
- Wait for the process to finish
- After flashing boot to recovery mode by pressing the volume up + power at the same time
- Select Wipe Data and Format Options
- Do Factory Reset
- Reboot device
Download:
- Dev-Host
Flashable Zip via Recovery: (This is for fast flashing or restore only. Be sure you already performed the above upgrade from JB to KK using SP Flash tool before using this flashable zip to avoid any issues.)
- Dev-Host
XDA:DevDB Information
[UNOFFICIAL][AOSP][KitKat 4.4.2] Cherry Mobile OMEGA HD 2.0 & Lava Xolo Q1000, ROM for the Lava Xolo Q1000
Contributors
remzej, Hyperion70
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Stable
Created 2015-03-08
Last Updated 2015-03-07
Click to expand...
Click to collapse
Sir @remzej thnx for the update..
---------- Post added at 09:36 AM ---------- Previous post was at 09:35 AM ----------
remzej said:
[UNOFFICIAL][AOSP][KitKat 4.4.2] Cherry Mobile OMEGA HD 2.0 & Lava Xolo Q1000
WARNING: I or xda is not responsible for any kind of damage to your device. Please use it at your own risk!
Feature(s):
- Based on AOSP KitKat 4.4.2
- Custom Kernel 3.4.67
- 13MP main camera & 3MP front camera
- SuperSU v2.46 pre-installed
- BusyBox pre-installed
- init.d supported
- MTP & mass storage mode supported
- And many more...
Credit(s):
- @hyperion70 (Original thread)
- @sai3811
- @Santhosh M
- @MasterAwesome
- @Dr-Shadow
- @superdragonpt
- 4PDA
- XDA
- bq (Aquaris 5 HD kernel source)
- Others not mentioned but also contributed to my worked
Important Note(s):
- Do not update/replace pre-installed BusyBox.
How to install/upgrade from JB to KK:
- Download and install MediaTek MT65xx PreLoader USB VCOM Port
- Download SP Flash Tool v3.1344.0.212
- Download Firmware
- Extract downloaded archive(s) SP Flash Tool and firmware
- Open SP Flash Tool (Flash_Tool.exe)
- Click Scatter-loading button and navigate to the extracted firmware folder
- Load MT6589_Android_scatter_emmc.txt file
- Click Firmware -> Upgrade button
- Turn off device, plugin USB cable to phone and PC
- Wait for the process to finish
- After flashing boot to recovery mode by pressing the volume up + power at the same time
- Select Wipe Data and Format Options
- Do Factory Reset
- Reboot device
Download:
- Dev-Host
Flashable Zip via Recovery: (This is for fast flashing or restore only. Be sure you already performed the above upgrade from JB to KK using SP Flash tool before using this flashable zip to avoid any issues.)
- Dev-Host
XDA:DevDB Information
[UNOFFICIAL][AOSP][KitKat 4.4.2] Cherry Mobile OMEGA HD 2.0 & Lava Xolo Q1000, ROM for the Lava Xolo Q1000
Contributors
remzej, Hyperion70
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Stable
Created 2015-03-08
Last Updated 2015-03-07
Click to expand...
Click to collapse
Sir @remzej thnx for the update..
Thank you Sir Rem Zej...!!!
I am flashing it now and will keep u updated with any lag or issues...:good:
Super Fine Works...!!!
Flashed an hour ago...
This rom is rocking my Xolo Q1000... I Bow to your work Sir RemZej...:good::victory:
Working superfine just like your previous rom PureXperia Z2 v4.3.7a...
Gonna enjoy this KITKAT you brought us (Ofcourse Kitkat ROM) until your next release....Thank you Again Dude...:good:
---------- Post added at 05:56 PM ---------- Previous post was at 05:23 PM ----------
Sir can i flash PurePerformance X v1.4 to this rom?
Please guide
Till now known issues...
Proximity sensor malfunctions during calls...
HELP
Good day sir, please i really need your help and i cant get it in the group since everyone speak Filipino, and i dont understand it, i upgraded to kitkat on my OHD 2.0 build 7 and since then i lost sound on my phone and my phone memory partition became messed up, i used to have internal storage 0.99GB and phone storage 1.47GB but since the upgrade i only have internal storage 2.46GB and phone storage 0.00GB. please sir i really want to revert my partition to the way it was on JB. and if you can point me on the way to patch and return my sound i will be very grateful, thank you sir.
cygnis said:
Good day sir, please i really need your help and i cant get it in the group since everyone speak Filipino, and i dont understand it, i upgraded to kitkat on my OHD 2.0 build 7 and since then i lost sound on my phone and my phone memory partition became messed up, i used to have internal storage 0.99GB and phone storage 1.47GB but since the upgrade i only have internal storage 2.46GB and phone storage 0.00GB. please sir i really want to revert my partition to the way it was on JB. and if you can point me on the way to patch and return my sound i will be very grateful, thank you sir.
Click to expand...
Click to collapse
Bro flash the Stock JB firmware using sp tools...then it will be fine just like before..
cygnis said:
Good day sir, please i really need your help and i cant get it in the group since everyone speak Filipino, and i dont understand it, i upgraded to kitkat on my OHD 2.0 build 7 and since then i lost sound on my phone and my phone memory partition became messed up, i used to have internal storage 0.99GB and phone storage 1.47GB but since the upgrade i only have internal storage 2.46GB and phone storage 0.00GB. please sir i really want to revert my partition to the way it was on JB. and if you can point me on the way to patch and return my sound i will be very grateful, thank you sir.
Click to expand...
Click to collapse
Can you give me the link you downloaded and flashed to your phone? I think you flash the bq Aquaris 5 HD firmware.
abhipanthi said:
Proximity sensor malfunctions during calls...
Click to expand...
Click to collapse
My proximity sensors works well during calls bro.
everytime i flash this, using spftool on first boot i have baseband and IMEI, but the next time i restart my phone i lost my baseband and IMEI, tried all procedures in restoring nvram nothing works
please sir @remzej help
TheCardinal said:
everytime i flash this, using spftool on first boot i have baseband and IMEI, but the next time i restart my phone i lost my baseband and IMEI, tried all procedures in restoring nvram nothing works
please sir @remzej help
Click to expand...
Click to collapse
Be sure to backup your previous IMEI/NVRAM so you can restore it using MTK Droid Tools.
abhipanthi said:
Flashed an hour ago...
This rom is rocking my Xolo Q1000... I Bow to your work Sir RemZej...:good::victory:
Working superfine just like your previous rom PureXperia Z2 v4.3.7a...
Gonna enjoy this KITKAT you brought us (Ofcourse Kitkat ROM) until your next release....Thank you Again Dude...:good:
Click to expand...
Click to collapse
Please sir, I get an error message when flashing the Unofficial AOSP via so flastool, after loading scatter file and clicking on firmware upgrade, the error says " please make sure all necessary image file are checked to be downnloaded for "firmware upgrade"", please sir how did you pass through firmware upgrade when all files are not selected in scatter file?
Almost after an year of black patch problem in playstore and various other apps are fixed... Its a delight to use your app.. Thanks a lot.
New sources found, for the next version of this Rom all the credits belongs to @Ciro and his team for having created the Ciro's Project Lucky
Link TWRP, STOCK FIRMWARE AND CAMERA FIX :
https://mega.co.nz/#F!CA8khTCK!cHzF_HYFgYACwOWju56UPQ
Link ROM:
How To Install:
1) Download the folder with all files (recommended) or all of the individual files (if you already have some necessary file on your computer and do not want to re-download)
2) Make a backup because the system will be formatted
3) From the current recovery do everything possible to wipe excluding sdcard
4) Start the phone in Download Mode
5) Connect your phone to your computer and start Odin
6) Check that the phone is marked on odin as COM: "Number" and that the boxes are checked ONLY "Auto reboot" and "F. Reset Time")
7) Click on AP and select the firmware file you downloaded
8) Wait for checks the md5
9) Press on start
10) After the device reboots; after the re-start it off and re-enter Download Mode
11) Reopen Odin and cliccrare AP
12) Select the file of TWRP
13) Click on Start and wait for the end; after the device starts
14) Copy the files of the Rom
15) Turn off your device
16) Go into recovery mode (Vol UP + Home Button + Power Button)
17) Select Wipe Data and then "Yes - Wipe all user data"
18) At the end of the process choose Wipe Cache and then back to "Yes"
19) At the end of the process and then choose Advanced Wipe Dalvik-Cache and then select "Yes"
20) At the end of the process, select "Install Zip", then "choose zip from / sdcard" and select the zip of the rom and then press "Yes"
21) At the end of the process do a Wipe of the Cache
22) At the end select "reboot system" and wait for the boot (5-10 min)
ME AND THE FORUM WE DO NOT TAKE ANY RESPONSIBILITY FOR ANY DAMAGE TO YOUR DEVICE. IF YOU BRICK FLASH THE ORIGINAL FIRMWARE.
XDA:DevDB Information
Bradex Rom S6, ROM for the Samsung Galaxy S3 Neo
Contributors
fraross, Ciro
Source Code: http://forum.xda-developers.com/galaxy-s3-neo/development/rom-ciro-s-rom-t3356584
ROM OS Version: 5.1.x Lollipop
ROM Firmware Required: Stock 4.4
Based On: Samsung Stock
Version Information
Status: Stable
Current Beta Version: Bradex ROM 9.0
Beta Release Date: 2015-09-25
Created 2015-04-15
Last Updated 2016-06-11
Reserved
Reserved
I'll test. Send a link and I will install it right away. ?
Sent from my GT-I9301I using XDA Free mobile app
I want to test it man
I want to test this rom
Can you send a link I will test it
is it working both dual sim and single sim ??
The developer settings doesnt work
I want to test My phone gt-i9301i
did you ported this rom on lollipop?
fraross said:
WARNING: I WANT TO REPORT THAT THE ROM HAS NOT BEEN CREATED BY ME BUT IT'S ONLY THE PORTING PORTING OF THE ONE OF @singhking83 . ALL CREDITS TO HAVE CREATED THE ROM BELONG TO @singhking83. IF YOU LIKED THIS ROM PLEASE SAY THANKS TO @singhking83
I'M LOOKING FOR DEVELOPERS AND TESTER FOR THIS PORT.
UNTIL @singhking83 DOESN'T ANSWER TO MY PRIVATE MESSAGE FOR PERMISSION TO MODIFY HIS ROM I CAN NOT SHARE THE LINK THAT CONTAINS THE WORK THAT I HAVE DONE UNTIL NOW.
WHEN HE WILL ANSWER I'LL SHARE THE LINK...
ME AND THE FORUM WE DO NOT TAKE ANY RESPONSIBILITY FOR ANY DAMAGE TO YOUR DEVICE. IF YOU BRICK FLASH THE ORIGINAL FIRMWARE.
XDA:DevDB Information
Bradex Rom S6, ROM for the Samsung Galaxy S3 Neo
Contributors
fraross
Source Code: http://forum.xda-developers.com/galaxy-grand-2/development/rom-s6-styled-s5port-rom-t3061428?nocache=1
ROM OS Version: 5.0.x Lollipop
ROM Firmware Required: Stock
Based On: Samsung Stock
Version Information
Status: Testing
Current Stable Version: not relased yet
Current Beta Version: V1.0
Beta Release Date: 2015-04-15
Created 2015-04-15
Last Updated 2015-04-15
Click to expand...
Click to collapse
i can test it bro
test
I will test it if it
my device is I9300I
This is the link of my work:
https://mega.co.nz/#!bQliFIII!o37BeEaTn8g667k00Q1Yw2ZxBjrf4MoXzdWTLArNlEw
This is a port for the single sim version of s3 neo. I still haven't tested it...
WORKS ONLY WITH GT-I9301I
Should i try it on the dual sim version?
viraj147 said:
Should i try it on the dual sim version?
Click to expand...
Click to collapse
No, if you try to flash it on dual sim version your device will go in brick or bootloop
does the developer option work in your rom, because i try it orginal bradex rom and they doesnt work?
ok thanks
any news on when you will make it for the dual sim version?
Please port it to dual sim I9300I
For this version of Bradex Rom, I'm basing on another Rom. For now, I want to do a porting of the base Rom working.
Can we get more info?
Does Install instruction are the same? wipe cache and data and install zip?
recovery installation? TWRP or CWM?
Can we install from CM12 or only from base stock?
Any screenshot?
I created a flash-able zip file to flash Android Q's NotoColorEmojis and i have uploaded it into my drive so you can download it. I can't say that it will work for Android Lollipop or below.
REQUIREMENTS:
1: Unlocked Bootloader
2: Custom Recovery
3: No root Required
4: A zip attached in Thread
STEPS:
1: Download Zip below attached.
2: Place in internal Storage or SD card or OTG USB.
3: Reboot to recovery.
4: Select storage and find the zip.
5: Flash and Reboot System.
Enjoy
Hit thanks if you like!
See Ya
#QAZTECH
https://drive.google.com/open?id=1uI-snOKWciKShzhE-zzQJ3t47yE-3I3v
XDA:DevDB Information
Android Q - FLASHABLE emojis, Tool/Utility for the Moto G4 Plus
Contributors
geetaroraqaz
Version Information
Status: Stable
Created 2019-07-16
Last Updated 2019-07-16
Does the zip contain all the emojis that are also in Android Oreo and Android Pie?