Code:
/*
* Your warranty is now VOID!
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
This is my custom ROM built only for Oneplus 3T. DO NOT try to flash it on Oneplus 3.
This ROM is NOT compatible with sultan's custom kernel (actually not compatible with any kernel that is not built for CM14.1)
I built this for my own daily use, and shared because I did not see another public release of CM14.1 yet. This is based on the work of morckx at GitHub.
Sorry for you all, but the final exam for me is coming I might not have time to update this ROM regularly, so let's just wait for CM's official support or you may turn to the unified unofficial nightlies lol.. (actually I could have updated this last weekend but I went for dating, haha.)
ROM features
- Vanilla CyanogenMod 14.1 (last synced: 2016-12-14 GMT+8)
- Ported to Oneplus 3T (Thanks to morckx for merging 3T changes into the CM kernel)
- No OTA supported for this ROM, if you receive any, please ignore it and DO NOT install. (Though you will not be able to install that at all)
About the embedded "Brevent" App:
This is a refactored version of the Xposed module "Prevent Running" (http://repo.xposed.info/module/me.piebridge.forcestopgb) that do not depend on the Xposed framework but depend on framework patches, which I need for daily use because I have to stop some Chinese apps from keeping the whole device awake all the time. Sorry if adding this brought you any inconvenience, and you can turn the 'Auto Prevent' off in Brevent -> User Guide -> Advanced Settings, thus it will not affect apps any more. Read the instructions at https://github.com/liudongmiao/Brevent to learn more about it.
Installation
Flash the zips with a custom recovery, for example, TWRP.
Known bugs
- All BUGs that the CM14.1 ROM for Oneplus 3 has
- Front camera goes only up to 4MP instead of 16MP
- New photos may become green sometimes (use a third-party camera app instead if you experience this issue)
- (Confirmation needed) LTE may not work as expected for some carriers. However I did not encounter any problem for my China Telecom LTE(+) network for now.
- You tell me
Source code
https://github.com/LOSP/local_manifests
Downloads
2016.12.14
AndroidFileHost: https://www.androidfilehost.com/?fid=457095661767122729
- Updated camera drivers and configurations from OxygenOS 3.5.3 for OnePlus 3T (front camera 16MP still missing, maybe it needs a CameraWrapper)
- Synced lastest CM sources
- Applied framework patches for Brevent and pre-installed Brevent.apk (An app that tries to prevent selected apps from keeping themselves alive and keeping the CPU awake, see https://github.com/liudongmiao/Brevent for details)
DISCLAIMER: I, PeterCxy, am not affiliated with the author of Brevent, and do not get any income for embedding this app, and this app do not include any form of ADs.
2016.12.13
AndroidFileHost: https://www.androidfilehost.com/?fid=673368273298916355
Screenshots
See attachments
Donation
Bitcoin: 33yHkcWmTbKegCVVeTkqKcAdibG814f9To
Credits to:
- All CyanogenMod contributors
- morckx for merging the kernel sources (actually I am just a packager of his work)
Thanks a lot
Wow! Awesome man! Thanks!
awsome great job OP
Seriously... lol right after I load cm13 on my device you go an do this
Thanks for nothing lol
Jk
Thanks OP
c_86 said:
Seriously... lol right after I load cm13 on my device you go an do this
Thanks for nothing lol
Jk
Thanks OP
Click to expand...
Click to collapse
Use multirom [emoji41]
Sent from my Darkside of Oneplus 3T
OMG! Going to flash it today! Thanks a lot!!!!
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
c_86 said:
Seriously... lol right after I load cm13 on my device you go an do this
Thanks for nothing lol
Jk
Thanks OP
Click to expand...
Click to collapse
No worries, you can just dirty flash this over Sultan's rom, did the same for the OPO, OPX and now for the 3T :
- Backup in TWRP (Just in case)
- Do not wipe anything!
- Flash CM14.1
- Flash Gapps 7.1 ARM64
- Wipe cache/dalvik
- Reboot
Clean flash is always better ofcourse but for now everything is working perfectly for me.
michie said:
No worries, you can just dirty flash this over Sultan's rom, did the same for the OPO, OPX and now for the 3T :
- Backup in TWRP (Just in case)
- Do not wipe anything!
- Flash CM14.1
- Flash Gapps 7.1 ARM64
- Wipe cache/dalvik
- Reboot
Clean flash is always better ofcourse but for now everything is working perfectly for me.
Click to expand...
Click to collapse
Thanks! I may try this.. BTW what are some of the bugs he mentions that are on the op3?
Thanks for this @PeterCxy
I think it would be better to rename the file to: cm-14.1-20161213-UNOFFICIAL-oneplus3T.zip
To avoid confusions , just saying ...
c_86 said:
Thanks! I may try this.. BTW what are some of the bugs he mentions that are on the op3?
Click to expand...
Click to collapse
They don't mention device specific bugs, only "many minor bugs" so I guess it will be in CM framework. Each nightly will bring new fixes but.new bugs too till they bring out a stable branch. I would advise staying on a nightly that seems stable for your use and only update when the monthly security patch is released by google and merged by CM.
michie said:
They don't mention device specific bugs, only "many minor bugs" so I guess it will be in CM framework. Each nightly will bring new fixes but.new bugs too till they bring out a stable branch. I would advise staying on a nightly that seems stable for your use and only update when a security patch is released and merged.
Click to expand...
Click to collapse
Cool thanks. Just read over the op3 cm14.1 thread and it seems like everything major is working.
pvillasuso said:
Thanks for this @PeterCxy
I think it would be better to rename the file to: cm-14.1-20161213-UNOFFICIAL-oneplus3T.zip
To avoid confusions , just saying ...
Click to expand...
Click to collapse
Yes I agree. The naming was directly taken from CM14.1 building system, and I was too excited to rename the device.... But no worry, oneplus3 users will not be able to flash it into their devices.
Anyone having issues with the screen turning yellowish after rebooting?
c_86 said:
Anyone having issues with the screen turning yellowish after rebooting?
Click to expand...
Click to collapse
That's LiveDisplay, just turn it off in Settings -> Display -> LiveDisplay
PeterCxy said:
That's LiveDisplay, just turn it off in Settings -> Display -> LiveDisplay
Click to expand...
Click to collapse
I just realized that when I was playing with the settings. Derp
Thank
Edit... I know i shouldn't care but I do... but does it seem like the ram usage is high on this? Averaging around 1.9gb after a fresh reboot...
c_86 said:
I just realized that when I was playing with the settings. Derp
Thank
Edit... I know i shouldn't care but I do... but does it seem like the ram usage is high on this? Averaging around 1.9gb after a fresh reboot...
Click to expand...
Click to collapse
Well I did not really think so because I just went from OxygenOS and the free ram was usually 1.8GB while now it is around 2.8GB.
PeterCxy said:
Well I did not really think so because I just went from OxygenOS and the free ram was usually 1.8GB while now it is around 2.8GB.
Click to expand...
Click to collapse
Sorry should have specified better that's 1.9 go usage not free. 1.9 go used. In cm13 for example it was around 1.3gb used
Here we go... Any bug? Echo in call?
Fingerprint is fast?
Enviado desde mi ONEPLUS A3003 mediante Tapatalk
For the people who are interested and maybe feed for the OP, working perfectly and tested by me on this rom :
Nougat System app Debloater Script:
(Maximum Debloater version)
- Flash in recovery
- Removes AOSP apps so you can replace them with the new google PlayStore apps :
AOSP Browser2 -> Google Chrome
AOSP Calculator -> - Google Calculator
AOSP Calendar -> Google Calendar
AOSP Camera2 -> Open Camera - F-Droid
AOSP Contacts -> Google Contacts
AOSP DesktopClock -> Google Clock
AOSP Dialer -> Google Phone
AOSP Email -> Google Gmail
AOSP Gallery -> Google Photos
AOSP Keyboard -> Google Keyboard
AOSP Messaging -> Google Messenger
AOSP Music -> Google Play Music
AOSP QuickSearchBox -> Google
BE SURE TO HAVE GOOGLE KEYBOARD INSTALLED BEFORE FLASHING. OTHERWISE YOU WILL HAVE NO KEYBOARD AND WILL HAVE TO SIDELOAD THE APK.
Download : [url]http://forum.xda-developers.com/google-nexus-5/themes-apps/gapps-debloating-scripts-aosp-t3457204[/URL]
Related
Announcing PACE and PACE Plus for Find7.
PACE
This is pure AOSP plus with just enough CAF/CM enhancements to get it to run on a variety of hardware.
NOTE!!!
This is only for Find7a right now. I am working on adding support for Find7s. It should be ready in a few days.
Download:
pace44-find7-1.0.rc5.zip
md5=fa2984b63cdcbfab17b4118f397ddb66
Superuser (SuperSU):
superuser.zip
PACE Plus
This includes a few enhancements:
* Built-in SuperSU
* Gesture (swipey) keyboard
* Custom boot animation
* Density (DPI) changer
* Built-in adfree hosts
* Quick settings pulldown
* Torch
* Custom power menu
Planned enhancements:
* Theme support
* No-reboot installer
* ... Other suggestions?
Download:
paceplus44-find7-1.0.rc5.zip
md5=24d12e9aa482ea64d4ec0711af1e3c75
Known Issues:
* Location API (geolocation) used by apps like "Fences" does not work.
Changelog
v1.0rc5
* Initial build for Find7
Source:
github.com/pacerom
Hi, what is the differences between the branch v4.4 and v4.4plus with your source code on Github?
systop said:
Hi, what is the differences between the branch v4.4 and v4.4plus with your source code on Github?
Click to expand...
Click to collapse
The plus branch has the plus code with features listed in the OP.
tdm said:
The plus branch has the plus code with features listed in the OP.
Click to expand...
Click to collapse
I can get it, thank you for your so quick reply.
Then I wonder if I can roll back to 4.4.2? It is because I want to build a 4.4.2 pacerom using cm tree as a base rom to patch other roms like miui
Nice to see you here mate. Your rom on the OGP is excellent and I'm sure you will aim to please here as well
I did download and install an early *unannounced* build of this (before you had the thread up) and it was hard for me to pass the boot ani. I eventually booted in to safe mode and after that initial boot it worked great
*EDIT*
Flashed latest plus just now and it is flying. Would be awesome to have the device specific screen off gestures implemented. Only trouble so far is the AOSP keyboard force closes when swyping for me. Great work mate!
Hello, you can see some screenshots?
the rom is ready so how? does not need gapps? if so what is recommended MINI MODULAR PACKAGE ? thanks
Uanagana said:
Hello, you can see some screenshots?
the rom is ready so how? does not need gapps? if so what is recommended MINI MODULAR PACKAGE ? thanks
Click to expand...
Click to collapse
Im going to make this simple for you; ALWAYS flash gapps mini modular with every rom you ever use (unless you're flashing colorOS). I understand you are very new to XDA and perhaps a language barrier is the cause of some of the confusion (while corresponding with you in other threads)
@uppon2: The keyboard FC when using gestures should have been fixed. This is the fix commit:
https://github.com/pacerom/packages...mmit/9ddfe26215f035da036c620e69688c6721407811
That will depend on jni_unbundled_latinimegoogle existing, of course. It's provided in gapps.
If you have the "official" build with the md5 in the OP and you have gapps installed, I'll re-flash and re-test just to make sure something weird isn't going on.
I was on CM and Gummy for a couple months and I really got addicted to the tap2sleep/tap2wake stuff. I will definitely be trying to put those in soon. The other gesture stuff (circle for camera, vee for torch) may or may not make it in, depending on the amount of change required.
As for gapps, I have been using the CM recommended 20140606 package (linked here: http://wiki.cyanogenmod.org/w/Google_Apps) and it works well. Prior to last month I had been using the 20140105 package and it also worked well.
@Uanagana: Sorry no screen shots, just find a Nexus 5 screen shot and chop out the navbar.
tdm said:
@uppon2: The keyboard FC when using gestures should have been fixed. This is the fix commit:
https://github.com/pacerom/packages...mmit/9ddfe26215f035da036c620e69688c6721407811
That will depend on jni_unbundled_latinimegoogle existing, of course. It's provided in gapps.
If you have the "official" build with the md5 in the OP and you have gapps installed, I'll re-flash and re-test just to make sure something weird isn't going on.
I was on CM and Gummy for a couple months and I really got addicted to the tap2sleep/tap2wake stuff. I will definitely be trying to put those in soon. The other gesture stuff (circle for camera, vee for torch) may or may not make it in, depending on the amount of change required
Click to expand...
Click to collapse
I was reporting on the keyboard that is present in the rom. I had not flashed gapps at this stage so I'm assuming that will fix the problem.
I'm glad you're considering screen off gestures! Thank you
There are some duplicated ringtones in media and only difference is the letter case.
systop said:
There are some duplicated ringtones in media and only difference is the letter case.
Click to expand...
Click to collapse
I definitely see some weirdness with duplicated ring tones. Which ones do you see?
This may or may not be an aosp issue. I'll need to investigate.
tdm said:
I definitely see some weirdness with duplicated ring tones. Which ones do you see?
This may or may not be an aosp issue. I'll need to investigate.
Click to expand...
Click to collapse
Here is the list of duplicated ringtones:
arcturus.ogg vega.ogg Andromeda.ogg CanisMajor.ogg Perseus.ogg UrsaMinor.ogg hydra.ogg
Thanks for your rom, I have successfully patched a MIUI V5 4.4.4
Looks promising can't wait for find7 support thanks tdm
Here is my question, why do you remove the useful oppo custom setting from the CM tree?
systop said:
Here is my question, why do you remove the useful oppo custom setting from the CM tree?
Click to expand...
Click to collapse
I did not remove anything. I have my own tree and I am only adding things that are related to hardware support.
Which setting do you mean?
tdm said:
I did not remove anything. I have my own tree and I am only adding things that are related to hardware support.
Which setting do you mean?
Click to expand...
Click to collapse
You seems to remove the configpanel for common oppo phones which is included in cm tree
systop said:
You seems to remove the configpanel for common oppo phones which is included in cm tree
Click to expand...
Click to collapse
Ah yes the cmhw things. Is the anything in particular you want from that panel?
tdm said:
Ah yes the cmhw things. Is the anything in particular you want from that panel?
Click to expand...
Click to collapse
No, this config panel is not useful to me, and I only wonder if this panel is not compatible with the aosp?
systop said:
No, this config panel is not useful to me, and I only wonder if this panel is not compatible with the aosp?
Click to expand...
Click to collapse
I could add it if there is a need. But I have never wanted it myself.
Hi, I find that you add a kernel boot parameter: androidboot.selinux=permissive
I want to know why you add this? Is there any compatible issue with selinux between cm and pace?
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
As we got CM11.0 to beta-state fast, I decided to run weekly builds of it.
What are Weekly builds?
CM11.0 builds of the latest CyanogenMod sources from github, and latest armani-dev sources from GitHub so you always have latest CM features and fixes, and latest changes made by armani-dev.
New version will come out every week, most often during the weekends.
This is not a replacement for development thread. Post bugs there!
Click to expand...
Click to collapse
Original CM11 thread (htcmania): http://www.htcmania.com/showthread.php?t=893300
Original CM11 thread (xda): http://forum.xda-developers.com/redmi-1s/orig-development/rom-unofficial-cyanogenmod-11-t2909757
all credits: armani-dev(fefifofum, Kra1o5)
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now [STRIKE]void[/STRIKE] intact.
* Xiaomi is one of the OEMs who allow rooting, etc.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit their Gerrit Code Review.
Downloads
Weekly #2: cm-11-20141018-UNOFFICIAL-armani.zip
Weekly #1: cm-11-20141006-UNOFFICIAL-armani.zip
Google Apps: gapps-kk-20140606-signed.zip
Bugs
- you say!
Installation
- Flash official TWRP recovery (http://en.miui.com/thread-29291-1-1.html)
- Reboot into recovery
- wipe data/factory reset + wipe cache partition
- Install the ROM from internal memory/external sdcard from TWRP
- optionally install the Google Apps (support regarding Google Apps will not be provided by OP)
Changelog
Full changelog can be found on armani-dev Github, just check the sources!
FAQ
q: this error occours, will it be fixed with the next release?
a: not until I do not get the magic ball which can repair errors without logcat/kmsg.
q: Where are "Developer options" and "Performance" in Settings?
a: you must press the "Build number" 7 times in the "About phone"
q: I have a gray dot on top every time I enter the PIN. Is it normal?
upstream derp. doesn't affect functionality.
q: I do not sound the calls I get from SIM 2
a: upstream derp. second sim ringtone isn't set by default.
you must configure it.
open dialer
open menu -> settings -> subscription settings
switch to second tab (with your carrier name)
set ringtone
is the volume is lower than in MIUI?
no, is the same.
Can I install apps from MIUI to CyanogenMod?
Most likely no and if you want to discuss please open another thread.
Could you add a feature that is present in another rom?
no; only features present in official CM.
Reserved!
Thanks Mate!!
doubt
whats is the difference between..this and the other cm..?
Johnny199314 said:
whats is the difference between..this and the other cm..?
Click to expand...
Click to collapse
Both have different purposes.
there focus is on 'RC' builds, i.e. 'Release Candidate' while this one focuses on 'weekly' builds (similar to 'nightlies'); and it would defeat the purpose of mixing both the threads.
thewisenerd said:
Both have different purposes.
there focus is on 'RC' builds, i.e. 'Release Candidate' while this one focuses on 'weekly' builds (similar to 'nightlies'); and it would defeat the purpose of mixing both the threads.
Click to expand...
Click to collapse
thnxx a lot just now flashed..will say u if thr is any error..thnx mate
@thewisenerd thank for weeklies update...,this is amazing! but why did you delete your thread in the forum MIUI redmi 1s?
dapra95 said:
@thewisenerd thank for weeklies update...,this is amazing! but why did you delete your thread in the forum MIUI redmi 1s?
Click to expand...
Click to collapse
It was deleted by the moderators for being what they considered a 'duplicate thread', and it seems they don't want 'another' cm11 thread.
thewisenerd said:
It was deleted by the moderators for being what they considered a 'duplicate thread', and it seems they don't want 'another' cm11 thread.
Click to expand...
Click to collapse
oh ... sorry about that, nope I can still enjoy the rom weeklies here. once again thank you ...
fefifofum, Kra1o5
and your participation in weeklies update ...
enjoy ...
latest link
cm-11-20141009-UNOFFICIAL-armani.zip
will there be an update..it has been a week
Johnny199314 said:
will there be an update..it has been a week
Click to expand...
Click to collapse
Since RC6 was released a couple of days ago, there'll be no weekly this week.
thewisenerd said:
Since RC6 was released a couple of days ago, there'll be no weekly this week.
Click to expand...
Click to collapse
oh k bro..thnxx :laugh::good:
camera quality
I have tried cm 11 rc r6 and mokee rom in both roms the camera quality is very poor there are huge grains in the photos captured .....is thos bug also there on this rom
hi bro! good to see you again!! Damn!.. feeling awesome to own this Phone!! :highfive:
And just being curious that does this rom has music glitches Bug??
Again Good to see you here!! :silly:
ateeq72 said:
hi bro! good to see you again!! Damn!.. feeling awesome to own this Phone!! :highfive:
And just being curious that does this rom has music glitches Bug??
Again Good to see you here!! :silly:
Click to expand...
Click to collapse
I don't face any music glitch bug! :highfive::victory:
i've got a problem while my phone restarted.
phone stuck on MI logo after i set account, restart it and the phone is stuck on MI screen (no cm boot animation appear).
Gta san andreas lags insanely , iam experiencing antutu benchmarks as low as 15268:crying:
th30nly said:
i've got a problem while my phone restarted.
phone stuck on MI logo after i set account, restart it and the phone is stuck on MI screen (no cm boot animation appear).
Click to expand...
Click to collapse
fixed using this method.
flash using TWRP Recovery then remove the battery about 1 min after flashing process finish.
pray
place the battery then turn on your phone.
wait until MI logo away and Cyanogen logo appear. (aproximately 5-15min at worst)
The problem now below :
Black transparent big Dot always appear after device restarted.
location is in the top center of screen (see attachment)
Cannot detect Carrier Name on SIM 1 Telkomsel.
Audio is Low (anything)
anyone have cure with this issues ?
th30nly said:
The problem now below :
Black transparent big Dot always appear after device restarted.
location is in the top center of screen (see attachment)
Cannot detect Carrier Name on SIM 1 Telkomsel.
Audio is Low (anything)
anyone have cure with this issues ?
Click to expand...
Click to collapse
upstream derp; something related to msim
idk, seems upstream too. anything related to msim is upstream. know that msim is/was originally committed to CAF, iirc; with OEMs merging in those patches. CM merges these patches from CAF, so... can't say if they messed up, or we did. In any case, I don't face this bug (status: can't reproduce, won't fix.)
no, it isn't. it is the same as miui. If you are speaking about the speakers, I can't say much though. I (frankly speaking) don't like blaring speakers, and there have been not much commits affecting (in essence, decreasing) the speaker volume in armani-dev. There've been a few commits for improving/increasing the audio though (mainly, in-call audio). Most of these changes have been incorporated in CM11 RC6, and will be merged into the next weekly.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo.
These are UNOFFICIAL CyanogenMod builds built using the UBER-Toolchain (refer: https://plus.google.com/+ChetKener/posts/YzMJEkzPQgp ).
FOR UNLOCKED BOOTLOADERS ONLY!
Features:
These builds are completely based on CyanogenMod sources, and contain no modification of framework from my end.
WORKING:
Mostly Everything
NOT WORKING/BUGGY:
Camera, although present, is laggy and a WIP (like all other MM ROMs)
INSTRUCTIONS
-> Backup all important files
-> Boot into recovery
-> Wipe data/Factory Reset
-> Flash ROM
-> Flash GApps (optional)
-> Reboot
DOWNLOAD:
All builds can be downloaded from my AndroidFileHost folder linked below.
ROM: https://www.androidfilehost.com/?w=files&flid=57341
GApps: http://opengapps.org/
CHANGELOG:
Code:
[U]22-Sept-2016
-> Edited changelog after a long time :P
-> Switched to 1.3.3 branch of unified kernel
-> Using latest blobs from Sony.
-> Boot to recovery from OS finally works
-> Latest CM sources and upstream updates.
[U]07-May-2016[/U]
-> Latest v5a blobs from Sony
-> Fixed all calling and data issues.
-> Bootanimation scaling issue fixed.
-> Based off AICP tree. (Thanks to everyone who's contributed to that, especially be_mler_)
[U]11-March-2016[/U]
-> Include March security updates.
-> Latest CM Sources.
-> Fixed Recovery (CM Recovery is present now).
[U]08-March-2016[/U]
-> Initial bringup
The best way to appreciate someone's work is by pressing that Thanks button
XDA:DevDB Information
UBER-CM, ROM for the Sony Xperia Z1
Contributors
drakonizer
Source Code: https://github.com/CyanogenMod
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Unlocked Bootloader
Based On: CyanogenMod
Version Information
Status: Beta
Created 2016-03-08
Last Updated 2016-09-22
Reserved
STATE OF CAMERA:
As you may already be knowing, camera for Sony devices on Marshmallow is not stable yet. This is because Sony has decided to go open source (as much as possible) with the camera drivers. But don't worry, we've a lot of great developers working on it, and I have no doubt it will be stable very soon. Right now, the camera in this ROM is an indication of how much we've progressed.
Camera works for most parts at the moment. With the 22nd April release of the camera binaries, the camera seems to focus perfectly.
-> The rear camera has issues with low light photography, but in good lighting, pictures are really good.
-> The front camera is stable, and you can take decent photos in good lighting.
-> Camera works only with CM's Snap Camera app. Other apps have broken previews (which means WhatsApp web, Skype, and other such apps won't work).
Test it out and see if it's good enough for you. If not, well, you have been warned.
UPDATE 22/09: The latest build breaks the camera. THE CAMERA DOES NOT WORK. If you need the camera stay away. You're free to use the old build in which camera works as mentioned above
Reserved
Woah!
Great Work My Friend
Keep it up
thnx.!!!! you rock.!
One problem. When i charge phone to nighte , mornight is off. Sory my english.
topsecret78 said:
One problem. When i charge phone to nighte , mornight is off. Sory my english.
Click to expand...
Click to collapse
I'm sorry, I don't get your problem. Could you please try and describe it in a little more detail?
Sent from my Xperia Z1 (AOSP) using XDA Labs
drakonizer said:
I'm sorry, I don't get your problem. Could you please try and describe it in a little more detail?
Sent from my Xperia Z1 (AOSP) using XDA Labs
Click to expand...
Click to collapse
Maybe he's telling you that he has random reboot, while charging at night
Videocalls won't work bro
brickhayabusa said:
Videocalls won't work bro
Click to expand...
Click to collapse
As said in the OP, camera is a developer preview at the moment and we'll have to wait for Sony to bring in the improvements. There's nothing I can do.
Sent from my Xperia Z1 (AOSP) using XDA Labs
topsecret78 said:
One problem. When i charge phone to nighte , mornight is off. Sory my english.
Click to expand...
Click to collapse
Would you please say the problem you are facing in your language and we can translate it. I want to know if this is a bug or what!
@edit downloaded the stuff and fixing here, thanks for helping.
@Abu Badr, I just want to say that the phone falls into such a deep sleep that only a hard reset help, and after a few attempts.
topsecret78 said:
@Abu Badr, I just want to say that the phone falls into such a deep sleep that only a hard reset help, and after a few attempts.
Click to expand...
Click to collapse
I've never experienced this bug. If you can reproduce it, do a force shutdown by holding POW+VOL UP for 9 seconds and power on the device again. After that use http://forum.xda-developers.com/showthread.php?t=1520508 to get the last_kmsg and give it to me.
I know how to reset the phone, I forgot to do logcat. Just when I froze the night the phone later in the day time I am quickly changed the system because I was afraid that the route it gets.
Great rom. Thanks @drakonizer
Just one question, how to get root?
Edit: Got the root \o/
ROM updated to include March security patches and latest CM sources. Recovery is fixed now (only basic CM Recovery, sorry!).
See OP for download.
drakonizer said:
ROM updated to include March security patches and latest CM sources. Recovery is fixed now (only basic CM Recovery, sorry!).
See OP for download.
Click to expand...
Click to collapse
I think you are mistaken. CM has not merged (or posted) any March security updates yet. See here: http://source.android.com/security/bulletin/2016-03-01.html
None of those are in CM gerrit: http://review.cyanogenmod.org/#/q/cve
optimumpro said:
I think you are mistaken. CM has not merged (or posted) any March security updates yet. See here: http://source.android.com/security/bulletin/2016-03-01.html
None of those are in CM gerrit: http://review.cyanogenmod.org/#/q/cve
Click to expand...
Click to collapse
Please find screenshot attached.
Sent from my Xperia Z1 (AOSP) using XDA Labs
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
MoKee OpenSource is based on the Google AOSP. We update our source code frequently to keep up with the latest development, and not forgetting to merge in special features of our own at the same time.
A small group of people from around the world who are interested in Android launched this project on the 12th of December 2012, and is committed to make this ROM better and better. Like most contributors of open source projects (Omni, CyanogenMod, Slim AOSPA etc), we are doing all these in our free time as our passion...
Since this project is open source, anyone interested can participate in the development (maintain new devices, contribute code etc). Newcomers are always welcomed!
Read here for developer application; with this, you can host your unofficial MoKee builds on our server!
Important information:
This thread is for official MoKee 9.0 builds for Xiaomi Mi Note 3. The following will not be supported here:
Custom kernels
Mods
Xposed
We don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
Flashed a custom kernel
Installed or did mods from untrusted sources
Modified system files
Tips:
You need at least MIUI10 CN stable firmware, otherwise you'll get error 7 when installing the zip.
Installation:
First time flashing MoKee 9.0 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery (Latest official TWRP is highly recommended: https://twrp.me/xiaomi/xiaomiminote3.html)
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash MoKee
Optional: Install the Google Apps addon package
Reboot
Source code:
https://github.com/mokee
Credits:
MoKee Developers: https://github.com/orgs/MoKee/members
Code Aurora Forum
LineageOS
AOSP
Slim Roms
OmniROM
......
Download:
https://download.mokeedev.com/?device=jason
XDA:DevDB Information
MoKee, ROM for the Xiaomi Mi Note 3
Contributors
dianlujitao
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Version Information
Status: Nightly
Created 2019-01-20
Last Updated 2019-01-20
Thanks a lot for the effort of creating a new rom for this device
Would be nice to know the changelog and if there is any bugs
Thanks @dianlujitao
Thanks For Your Working @dianlujitao
You keep This Device Alive...
@dianlujitao
Thx,
I've just flashed. All work nice.
Can't find working GCam app.
More info tomorrow.
Morning - WhatsApp not killed.
Auto call recording is back - GREAT add on.
No,
Only few photos & green or force close.
Will edit post. @N3m3SiS_bcn
dzidexx said:
No,
Only few photos & green or force close.
Will edit post. @N3m3SiS_bcn
Click to expand...
Click to collapse
Try these https://f.celsoazevedo.com/file/gcamera/MGC_6.1.021_MI8_V2a+.apk, https://f.celsoazevedo.com/file/gcamera/GCam_Pixel3Mod_1.2beta_build.6.1.013.apk
N3m3SiS_bcn said:
Could you explain how did you install a working GCam app?
Thanks.
Click to expand...
Click to collapse
flash it
Thanks Zhien said:
flash it
Click to expand...
Click to collapse
Do you have newest Mokee - 21.01?
I'll update and 'll try you suggestions.
@Thanks Zhien
@zaqm
Mgc6.1.021.mi8.v2+ works on both builds, with ois&hal module.
Thanks
6.1.021_fu24 works too.
Btw,
Wireless display doesn't work - as all Custom Pie roms.
dzidexx said:
No,
Only few photos & green or force close.
Will edit post. @N3m3SiS_bcn
Click to expand...
Click to collapse
Set Input Mod Front and Back Camera to Nexus6P
EHSAN™ said:
Set Input Mod Front and Back Camera to Nexus6P
Click to expand...
Click to collapse
Back camera also works on Pixel || mode and also set Interface style to Pixel ||| to avoid dark videos on 1080p.
zaqm said:
Back camera also works on Pixel || mode and also set Interface style to Pixel ||| to avoid dark videos on 1080p.
Click to expand...
Click to collapse
Yes Back Camera On Pixel 2 Working But On a few Low Light you will see footprints Green...
And if you set Interface to Pixel 3 you should Enable Butter Fix If not You Will lose Manual Focus
EHSAN™ said:
Yes Back Camera On Pixel 2 Working But On a few Low Light you will see footprints Green...
And if you set Interface to Pixel 3 you should Enable Butter Fix If not You Will lose Manual Focus
Click to expand...
Click to collapse
No such issues but I'm on AEX PIE rom.
@dianlujitao
Hi, thanks for Mokee rom.
Nightly, everyday builds - where can I find what changed?
It will be nice to see in next builds:
More QS Tiles to add: screenshot, screen recording, reboot..,
Screen lock/unlock: face unlock - go to home screen(skip swipe).
Status bar: show clock & date.
KCal support into kernel.
Port of Miui Camera is possible? I think Stock Cam & GCam don't use two lenses.
Problems:
Auto brightness - it doesn't remember my preferences in a dark environment, it makes screen too dark. After screen off & on brightness is always set to minimum, not to my last.
Wireless display(ScreenCast) - doesn't work - force reboot SystemUi. All Pie custom roms have this bug.
Battery life:
10~15% for one hour sot, 2~3% for night(7~8 hours). WiFi, mobile data always ON.
dzidexx said:
@dianlujitao
Hi, thanks for Mokee rom.
Nightly, everyday builds - where can I find what changed?
It will be nice to see in next builds:
More QS Tiles to add: screenshot, screen recording, reboot..,
Screen lock/unlock: face unlock - go to home screen(skip swipe).
Status bar: show clock & date.
KCal support into kernel.
Port of Miui Camera is possible? I think Stock Cam & GCam don't use two lenses.
Problems:
Auto brightness - it doesn't remember my preferences in a dark environment, it makes screen too dark. After screen off & on brightness is always set to minimum, not to my last.
Wireless display(ScreenCast) - doesn't work - force reboot SystemUi. All Pie custom roms have this bug.
Click to expand...
Click to collapse
kcal is redundant when we have livedisplay. Any miui property apps will never be included but you can always install on yourself.
Auto brightness issue seems to be an upstream bug, I'll take a deeper look later. EDIT: will be fixed in the next build
Miracast is currently not supported on MoKee, but "All Pie custom roms have this bug" is not true, on lineage 16.0 it works fine.
dianlujitao said:
Miracast is currently not supported on MoKee, but "All Pie custom roms have this bug" is not true, on lineage 16.0 it works fine.
Click to expand...
Click to collapse
Thx, it's nice to know about it.
This is the best Pie rom so far, nice job on it Dian, I'm loving it. Here's my report:
I found some useful tools that are missing in this rom such as:
- Physical buttons customizations
- Recents multitasking Pie style (this is just my personal taste, the actual style is really horrible )
- Night display mode (I've read your answer about that but I still can't understand why automatic mode on live display doesn't work at night)
Things to fix:
- Whatsapp video calls (my video lags when I'm making a video call)
- Gpay and banking NFC payment (I know this should be something hard to fix but I wanted to report it anyway)
Thanks again Dian, if you need something to test you can ask me. Keep up this nice rom!
EDIT: Also, it would be nice to have floating notifications according to the theme (dark or white) instead of always white
EDIT N2: LiveDisplay seems working on automatic mode!
Gcam working in this rom?
kokwenghwa said:
Gcam working in this rom?
Click to expand...
Click to collapse
I do not work the front camera of any gcam .. I tried all the possible fixes
Hi, can you add the function awakens when you pick up the phone?
Grest rom!!
Inviato dal mio Mi Note 3 utilizzando Tapatalk
Whats the MiUi firmware to flash when flashing mokee 100 version based on Android 10?Gcam HDR+ enhanced processing stops at 90% with all of the gcams.How to fix that @dianlujitao
Android Open Source illusion Project
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
"AOSiP stands for Android Open Source illusion Project. We are an AOSP based custom ROM, twisted with the latest features from all over the Android development community. Quality and stability is our first priority as we are dedicated to bringing you the best Android has to offer.
AOSiP brings you the most wanted features, while keeping speed and stability our top priority.
AOSiP features multiple customization options, so your phone can look the way you want it."
Known issues:
- AOSiP ten is not officially released yet. There are missing features!
- Display > lockscreen > advanced settings (this wont to do anything)
- Instagram video recording (You will sound like a robot)
- Wi-Fi display reboots the phone
- Green pictures when using the stock camera/ Whatsapp in lowlight (this is related to YUV processing). Use provided gcam instead.
- Report unknown bugs with logs please!
Instructions :
Clean flash:
- Flash latest Pie ROM by Xiaomi (10.0.13.0). You may use option to retain userdata.
- Use fastboot to boot to latest TWRP.
- Falsh the TWRP installer zip and Force-encryption-disabler zip
- Reboot to TWRP
- Flash the ROM zip
- Flash TWRP installer
- Got to Reboot --> Change boot slot (if on A: A --> B or if on B: B --> A)
- Reboot to recovery
- (Optional, but recommended) Flash GAPPS linked below (other GAPPS for Android 10 may work too)
- (Optional) Flash Magisk (>v20.1!!!!)
- Reboot and wait, will take longer than normal reboot!
Dirty flash (upgrade from existing AOSiP 9 install):
- Reboot to TWRP
- Factory reset in TWRP. No need to wipe userdata! (Skip if you are on ten already)
- Flash ROM zip
- Flash TWRP installer
- Got to Reboot --> Change boot slot (if on A: A --> B or if on B: B --> A)
- Reboot to recovery
- (Optional, but recommended) Flash GAPPS linked below (other GAPPS for Android 10 may work too)
- (Optional) Flash Magisk (>v20.1!!!!)
- Reboot and wait, will take longer than normal reboot!
Note: It is strongly advised to make a backup before upgrading!
Downloads :
Download from Sourceforge
Open GApps Note: OpenGAPPS for ten now officially out, so link changed. Nano package is still recommended!
Recommended Gcam
Kernel Source
Device Tree
Vendor Tree
Props to all the guys from daisy-development-q and especially Lyceris-chan!
Have fun!
XDA:DevDB Information
[10.0][STABLE] AOSiP Quiche beta, ROM for the Xiaomi Mi A2 Lite
Contributors
opal06
Lyceris-chan
Tunasahinn
acras01
pawelik001
Offain/33bca
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Created 2019-11-27
Last Updated 2019-11-27
Thank you! Respect mate
Edit:
PS. With gapps you reccomend. Can i use Bit... or Open.. ?
gumka77 said:
Thank you! Respect mate
Edit:
PS. With gapps you reccomend. Can i use Bit... or Open.. ?
Click to expand...
Click to collapse
I used the OpenGAPPS from test folder I linked in the OP. Bit... might work, but no guarantee. Just try them and report back, so maybe other users can learn from your experiences.
Note: Updated my main phone from AOSiP Pie to Ten and had some wierd issues. Factory resetted in TWRP and now everything working. So making a backup and factory reset before updating is recommended
When viperos q?
Thanks you , I see your sources is stable thanks for upgrade aosip
opal06 said:
Android Open Source illusion Project
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
"AOSiP stands for Android Open Source illusion Project. We are an AOSP based custom ROM, twisted with the latest features from all over the Android development community. Quality and stability is our first priority as we are dedicated to bringing you the best Android has to offer.
AOSiP brings you the most wanted features, while keeping speed and stability our top priority.
AOSiP features multiple customization options, so your phone can look the way you want it."
Known issues:
- AOSiP ten is not officially released yet. There are missing features!
- Device side should be fine, but please report all bugs here with logs!
Instructions :
Follow guide by davidrocher: https://github.com/tkchn/daisyinstall
This works for Android 10 too! Please use correct version of OpenGAPPS.
Note: It is strongly advised to make a backup before upgrading and performing a factory reset in TWRP.
Downloads :
Download from Sourceforge
Open GApps
Kernel Source
Device Tree
Props to all the guys from daisy-development-q and especially acras1!
Have fun!
XDA:DevDB Information
[10.0][STABLE] AOSiP Quiche beta, ROM for the Xiaomi Mi A2 Lite
Contributors
opal06
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Created 2019-11-27
Last Updated 2019-11-27
Click to expand...
Click to collapse
i can't believe wifi, call, bluetooth audio, cam, fingerprint, navigation, google, youtube, spotify, usb connection to pc works
Only two things i've discovered, there is no clock app (i installed Gapps pico maybe that the problem) and AOSiP Updater seems not working.
Can someone give me a clock/ alarm app - opensource ? (App of Tibor Kaputa doesn't work)
schmidt_here said:
i can't believe wifi, call, bluetooth audio, cam, fingerprint, navigation, google, youtube, spotify works
Only two things i've discovered, there is no clock app (i installed Gapps pico maybe that the problem) and AOSiP Updater seems not working.
Can someone give me a clock/ alarm app - opensource ? (App of Tibor Kaputa doesn't work)
Click to expand...
Click to collapse
See if this works for you:
View attachment Clock_v1.0.0.zip
Thanks for the rom, what base is needed?, is November security patch?
Txatxiquesi said:
Thanks for the rom, what base is needed?, is November security patch?
Click to expand...
Click to collapse
yes, november
i don't remember wich version it was, i think 10.0.9. Try 10.0.13 and then post if it works
ps: i installed omniclock from playstore - it works
Fingeprint swipe doesn't work
opal06, kudos for signature spoofing built-in, I can use microG.
Can i update kernel to Celexas kernel v.2. (from devotag) ?
Thank you all very much for your positive feedback.
schmidt_here said:
i can't believe wifi, call, bluetooth audio, cam, fingerprint, navigation, google, youtube, spotify, usb connection to pc works
Only two things i've discovered, there is no clock app (i installed Gapps pico maybe that the problem) and AOSiP Updater seems not working.
Can someone give me a clock/ alarm app - opensource ? (App of Tibor Kaputa doesn't work)
Click to expand...
Click to collapse
As for the missing clock, I did not notice it during testing, but you are obviously right. For a stock feeling you can download the Clock app by Google, but there are many other good alternatives.
AOSiP updater is not working because I did not update the OTA file. AOSiP ten is still beta from ROM source side, so I won't enable OTA until it's official from their side.
Txatxiquesi said:
Thanks for the rom, what base is needed?, is November security patch?
Click to expand...
Click to collapse
As base any pie base should work, but latest is best.
schmidt_here said:
yes, november
i don't remember wich version it was, i think 10.0.9. Try 10.0.13 and then post if it works
ps: i installed omniclock from playstore - it works
Fingeprint swipe doesn't work
Click to expand...
Click to collapse
Have you enabled fingerprint swipe in Settings --> System --> Gestures? For me it works fine
gumka77 said:
Can i update kernel to Celexas kernel v.2. (from devotag) ?
Click to expand...
Click to collapse
Probably, just try and report. If something goes wrong, go to TWRP and flash ROM again without wiping data. You won't loose any settings or data.
Plis build with nitrogen kernel
test
opal06 said:
Have you enabled fingerprint swipe in Settings --> System --> Gestures? For me it works fine
Click to expand...
Click to collapse
Yes, it's enabled. It doesn't disturb me, maybe i've to make a fresh install and take another version base.
Yesterday i had an issue, i couldn't download from play store until i deactivated and reactivated the app. Also i couldn't install apk's downloaded manualy from website.
Maybe it's a unique incident
schmidt_here said:
Also i couldn't install apk's downloaded manualy from website.
Click to expand...
Click to collapse
I had a similar issue trying to install apps with Amaze file manager. I had no problem installing apps with the built-in file manager and also with F file manager from f-droid, in my case it was obviously an incompatibility of Amaze with 10. I'm on 10.0.9 base btw. Also I was able to delete system apps with Amaze and magisk 19.3 but not with 20.1. And I can't uninstall Whatsapp no matter what, the installer just quits so I must do it with adb uninstall.
celrau said:
I had a similar issue trying to install apps with Amaze file manager. I had no problem installing apps with the built-in file manager and also with F file manager from f-droid, in my case it was obviously an incompatibility of Amaze with 10. I'm on 10.0.9 base btw. Also I was able to delete system apps with Amaze and magisk 19.3 but not with 20.1. And I can't uninstall Whatsapp no matter what, the installer just quits so I must do it with adb uninstall.
Click to expand...
Click to collapse
That's normal behavior for magisk 20.1 because the system mount point had been changed from /system to / so most root using apps don't know how to use it. Besides that you can use the system debloater magisk module and that should work just fine.
lacia-chan said:
That's normal behavior for magisk 20.1 because the system mount point had been changed from /system to / so most root using apps don't know how to use it. Besides that you can use the system debloater magisk module and that should work just fine.
Click to expand...
Click to collapse
I just did some reading on this, you are right
Flashing Nitrogen R2 kernel results in bootloop with this rom. R1 works fine. Any fix?
good job
I'm using your rom for 1-2 days now Looks like every features work really well to me. I'l report back later if I see anything. Thanks OP