Related
I use KitKat beta and TWRP 2.6.3.5 for KitKat, do i need to downgrade to 2.6.3.0 if i want to go back to CM 10.1 or can i still use 2.6.3.5?
Excuse my bad english
Muztek said:
I use KitKat beta and TWRP 2.6.3.5 for KitKat, do i need to downgrade to 2.6.3.0 if i want to go back to CM 10.1 or can i still use 2.6.3.5?
Excuse my bad english
Click to expand...
Click to collapse
If you ask me that's an UPGRADE not a DOWNGRADE.
ZuperStyler said:
If you ask me that's an UPGRADE not a DOWNGRADE.
Click to expand...
Click to collapse
Yes, but when i read about 2.6.3.5 it says "only for kitkat" and i want to go back to CM 10.1 kan it be truble with twrp 2.6.3.5?
Muztek said:
Yes, but when i read about 2.6.3.5 it says "only for kitkat" and i want to go back to CM 10.1 kan it be truble with twrp 2.6.3.5?
Click to expand...
Click to collapse
Make sure you have CM ZIP on your external sdcard, flash 2.6.3.0 V03.1 Recovery and with that install CM.
Muztek said:
Yes, but when i read about 2.6.3.5 it says "only for kitkat" and i want to go back to CM 10.1 kan it be truble with twrp 2.6.3.5?
Click to expand...
Click to collapse
Hi !
Yes, first you must downgrade your device to Stock Huawei Android 4.2.2 !
If you want to use CM10.1 without issue, please install stock recovery KitKat , flash in the stock recovery -> firmware B120 CN version, now you must install TWRP R03.1 recovery & finally you can install CM10.1 !
Good luck !
---------- Post added at 06:40 PM ---------- Previous post was at 06:37 PM ----------
ZuperStyler said:
Make sure you have CM ZIP on your external sdcard, flash 2.6.3.0 V03.1 Recovery and with that install CM.
Click to expand...
Click to collapse
No, this is a wrong way !
surdu_petru said:
Hi !
Yes, first you must downgrade your device to Stock Huawei Android 4.2.2 !
If you want to use CM10.1 without issue, please install stock recovery KitKat , flash in the stock recovery -> firmware B120 CN version, now you must install TWRP R03.1 recovery & finally you can install CM10.1 !
Good luck !
---------- Post added at 06:40 PM ---------- Previous post was at 06:37 PM ----------
No, this is a wrong way !
Click to expand...
Click to collapse
You are wrong, that's how I did it, and it works fine, just the TWRP fails to restore. And he already is on KK with stock recovery, so you said exactly what I said but with more words.
ZuperStyler said:
You are wrong, that's how I did it, and it works fine, just the TWRP fails to restore.
Click to expand...
Click to collapse
As I told you, I tell you once again - your solution is a WRONG way !
Please do not mislead other users !
The correct path is described by me !
Thanks @surdu_petru you do a great job with this device
surdu_petru said:
As I told you, I tell you once again - your solution is a WRONG way !
Please do not mislead other users !
The correct path is described by me !
Click to expand...
Click to collapse
As I told you, my method worked on my device, don't act like your way is the ONLY way. Thank you.
ZuperStyler said:
As I told you, my method worked on my device, don't act like your way is the ONLY way. Thank you.
Click to expand...
Click to collapse
Ok, my solution is the only correct way !
Also, you are not obliged to follow it or understand it !
I didn't say that your solution doesn't work, just I say : your solution is a wrong way to revert to CM10.1 , using Stock Huawei Kitkat with custom recovery TWRP 2.6.3.5 !
Even you have issue of TWRP , after you followed your way , so you must understand why ...
To solve the problem, we have multiple solutions - but we have to follow the correct solution !
surdu_petru said:
Ok, my solution is the only correct way !
Also, you are not obliged to follow it or understand it !
I didn't say that your solution doesn't work, just I say : your solution is a wrong way to revert to CM10.1 , using Stock Huawei Kitkat with custom recovery TWRP 2.6.3.5 !
Even you have issue of TWRP , after you followed your way , so you must understand why ...
To solve the problem, we have multiple solutions - but we have to follow the correct solution !
Click to expand...
Click to collapse
True but the idea is that this way won't brick the phone, of course it's not perfect, but the phone it's safe. The user is free to follow your solution of course.
ZuperStyler said:
True but the idea is that this way won't brick the phone, of course it's not perfect, but the phone it's safe. The user is free to follow your solution of course.
Click to expand...
Click to collapse
I managed to resolved the TWRP not restoring. I flashed it again through adb command. Now works, backup and restore without any problems.
Hi, I managed to unlock my nexus 7 and install the latest TWRP.
But now I cant boot to the OS! It says no OS despite me not wiping that.
Within TWRP it says "no valid storage partitions found for mtp"
I cant format anything or do a factory reset!
Can anyone help me?
Download stock firmware from Google, follow instructions to flash on the same webpage
nhizzat said:
Download stock firmware from Google, follow instructions to flash on the same webpage
Click to expand...
Click to collapse
Worked like a charm! Thanks man
viperman78 said:
Hi, I managed to unlock my nexus 7 and install the latest TWRP.
Click to expand...
Click to collapse
The latest TWRP is buggy, use TWRP 2.8.1.0.
Look here.
---------- Post added at 09:13 PM ---------- Previous post was at 09:12 PM ----------
viperman78 said:
Hi, I managed to unlock my nexus 7 and install the latest TWRP.
Click to expand...
Click to collapse
The latest TWRP is buggy, use TWRP 2.8.1.0.
Look here, tha latest posts in this thread.
Hi guys
I was trying to get TWRP on my ZE551ML (WW-2.20.40.198). In order to do that, I tried to unlock the bootloader using this guide. I don't believe it worked, though, because every time I tried to flash TWRP through Fastboot or the app, it failed.
So now, I don't have any recovery at all. If I go to the bootloader and select "RECOVERY MODE", the phone just restarts and goes to the same bootloader again. So I got neither the stock recovery, nor TWRP.
I did manage to root and install Xposed, though, both through adb. What worries me, though, is that if I mess up my phone somehow, I won't be able to flash stock firmware or a backup. I would actually prefer to have the stock recovery at this point.
What can I do? I need the stock recovery to flash the stock firmware, but I can't.
I've tried Asus Flashtool before, but it didn't work. I think maybe it's because I tried it on Windows 10, some users said it worked better with Windows 7.
Help would be greatly appreciated.
You fastboot flash stock recovery for .198 in bootloader state.
timbernot said:
You fastboot flash stock recovery for .198 in bootloader state.
Click to expand...
Click to collapse
Where can I get the stock recovery?
http://forum.xda-developers.com/showthread.php?t=3096596
Sent from my Zenfone 2 using Tapatalk
https://mega.nz/#F!k4MHiAgL!dVuOKeH3eokcwPSNI79ffw
kenbo111 said:
http://forum.xda-developers.com/showthread.php?t=3096596
Sent from my Zenfone 2 using Tapatalk
Click to expand...
Click to collapse
Thanks, but I don't see .198 in the list, though?
timbernot said:
https://mega.nz/#F!k4MHiAgL!dVuOKeH3eokcwPSNI79ffw
Click to expand...
Click to collapse
Thanks, but I don't see .198 in the list, though?
4.20 .40 .184 or above should be fine for 551
I cannot open the link here on this , is there recovery for 194 or 6 ? Too
timbernot said:
4.20 .40 .184 or above should be fine for 551
I cannot open the link here on this , is there recovery for 194 or 6 ? Too
Click to expand...
Click to collapse
What happens if it's not fine? Do I have anything to lose?
You will be ok as long it is 551 , 184 and above same .184I think was last full fw and others after were incremental otas after, smallish
timbernot said:
4.20 .40 .184 or above should be fine for 551
I cannot open the link here on this , is there recovery for 194 or 6 ? Too
Click to expand...
Click to collapse
Yeah, 196 is there, is that alright? I'm afraid of brickng the phone.
Yup
---------- Post added at 10:17 PM ---------- Previous post was at 10:11 PM ----------
FYI You can flash .184 or above and have MM.134 FW on internal sd and get notification to update after a reboot
timbernot said:
Yup
---------- Post added at 10:17 PM ---------- Previous post was at 10:11 PM ----------
FYI You can flash .184 or above and have MM.134 FW on internal sd and get notification to update after a reboot
Click to expand...
Click to collapse
I did it, used Fastboot to flash .196 recovery.img. I can now access the stock recovery again! Thank you guys so much for the help! This was a big deal to me, I had been feeling so uncomfortable without having access to the recovery! Thank you!! Will try restoring the stock firmware tomorrow.
Fiksdal said:
I did it, used Fastboot to flash .196 recovery.img. I can now access the stock recovery again! Thank you guys so much for the help! This was a big deal to me, I had been feeling so uncomfortable without having access to the recovery! Thank you!! Will try restoring the stock firmware tomorrow.
Click to expand...
Click to collapse
Cool! Nice job
Sent from my Zenfone 2 using Tapatalk
kenbo111 said:
Cool! Nice job
Sent from my Zenfone 2 using Tapatalk
Click to expand...
Click to collapse
By the way, rather than flashing the .198 firmware again, I think it might be a good idea to flash "UL-Z00A-WW-2.20.40.196" from here since that will then correspond to the recovery file I flashed? Thoughts?
timbernot said:
You will be ok as long it is 551 , 184 and above same .184I think was last full fw and others after were incremental otas after, smallish
Click to expand...
Click to collapse
Should I now flash the 196 or the 198 firmware through adb? If I flash the 198, will it also restore 198 recovery? I've posted a new thread about it.
Already answered earlier at FYI above
.put MM 4-21.40.134 on internal sd and reboot
Have you not tried ?
No need for multiple threads
Ps , if don't get notification ,go to file manager and add .zip to the end so it looks like user.zip.zip save and reboot again
timbernot said:
Already answered earlier at FYI above
.put MM 4-21.40.134 on internal sd and reboot
Have you not tried ?
No need for multiple threads
Ps , if don't get notification ,go to file manager and add .zip to the end so it looks like user.zip.zip save and reboot again
Click to expand...
Click to collapse
Oh, sorry, I didn't notice it last time around, I was too excited about getting my recovery back
But what if I don't want Marshmallow, though? If I just want to stay on Lollipop? Do I just flash 198 and that's it?
timbernot said:
Already answered earlier at FYI above
.put MM 4-21.40.134 on internal sd and reboot
Have you not tried ?
No need for multiple threads
Ps , if don't get notification ,go to file manager and add .zip to the end so it looks like user.zip.zip save and reboot again
Click to expand...
Click to collapse
Actually, I flashed 196, and then I got 198 OTA the moment I booted . I guess that means I've got the 198 recovery too, now?
Yup , like mentioned previous , recovery will be the same from .184 lp
Ok..so I am trying to install Su Addon(Root package) via TWRP and it gives me error: ''executing updater binary in zip'' or Error 4. What can I do?
TheBT said:
Ok..so I am trying to install Su Addon(Root package) via TWRP and it gives me error: ''executing updater binary in zip'' or Error 4. What can I do?
Click to expand...
Click to collapse
You can start by flashing latest TWRP :good: on OP for lineage
timbernot said:
You can start by flashing latest TWRP :good: on OP for lineage
Click to expand...
Click to collapse
I have TWRP 3.0.2.2,but it doesn't work
TheBT said:
I have TWRP 3.0.2.2,but it doesn't work
Click to expand...
Click to collapse
https://forum.xda-developers.com/ze...al-cyanogenmod-14-1-weekly-t3545692?nocache=1
There's no white rabbit
Just a TWRP
timbernot said:
https://forum.xda-developers.com/ze...al-cyanogenmod-14-1-weekly-t3545692?nocache=1
There's no white rabbit
Just a TWRP
Click to expand...
Click to collapse
So...I have the lastest TWRP,but is says "ERROR SIGNAL 4"
TheBT said:
So...I have the lastest TWRP,but is says "ERROR SIGNAL 4"
Click to expand...
Click to collapse
what twrp you have install ?
Going in bath now , its important that when you flash new twrp that you reboot in new twrp immediately before flashing anything
timbernot said:
what twrp you have install ?
Going in bath now , its important that when you flash new twrp that you reboot in new twrp immediately before flashing anything
Click to expand...
Click to collapse
So..I have TWRP 3.0.2.2 flashed via ADB yesterday.And it works perfectly fine,but it gives me the same error as in 2.8.7.0 and is very hard for me to live without ROOT.I've thinking to root it via ADB...again as I did with stock ROM. Now of u can give me instructions about flashing zips via ADB it would be PERFECT!
Just leave your phone alone , you are liable to brick if you cannot follow simple advice
timbernot said:
Just leave your phone alone , you are liable to brick if you cannot follow simple advice
Click to expand...
Click to collapse
I am not really afraid of bricking...I already did it like 3 times.?
TheBT said:
I am not really afraid of bricking...I already did it like 3 times.
Click to expand...
Click to collapse
OK , let's start again.
Flash the twrp in lineagesOS OP
Download this
https://redirect.viglink.com/?forma...eageOS 14.1 Weekly… | Asus ZenFone 2&txt=TWRP
Then flash it as an image using your existing TWRP.
It will confirm on which partition youll flash it, select 'recovery'
Once done, reboot.
Proceed to recovery and then flash the SU package provided in LOS thread.
You might want to consider downloading the SU zip add on just to ensure that your file is not corrupted.
timbernot said:
OK , let's start again.
Flash the twrp in lineagesOS OP
Click to expand...
Click to collapse
Ok..so I am new with terminology and I don't really know what is OP? Please don't make laugh of me .?
TheBT said:
Ok..so I am new with terminology and I don't really know what is OP? Please don't make laugh of me .
Click to expand...
Click to collapse
So you unbrick 3 times using xFSTK and never picked up what OP is
---------- Post added at 11:52 AM ---------- Previous post was at 11:50 AM ----------
https://forum.xda-developers.com/showthread.php?t=1699838
timbernot said:
So you unbrick 3 times using xFSTK and never picked up what OP is
---------- Post added at 11:52 AM ---------- Previous post was at 11:50 AM ----------
https://forum.xda-developers.com/showthread.php?t=1699838
Click to expand...
Click to collapse
Ok...so..fk off this. I am trying to install root via ADB like with original ROM.
Try reading and asking in lineageOS thread if you are struggling with flashing latest TWRP.
You need to flash latest TWRP to flash latest lineageOS . The TWRP required is in the Original Post of lineageOS ...
you have 3 0 2 2
You need 3 0 3 M4. From the Original Post of lineageOS.
timbernot said:
Try reading and asking in lineageOS thread if you are struggling with flashing latest TWRP.
You need to flash latest TWRP to flash latest lineageOS . The TWRP required is in the Original Post of lineageOS ...
you have 3 0 2 2
You need 3 0 3 M4. From the Original Post of lineageOS.
Click to expand...
Click to collapse
Bit of a problem here....my phone is a bit avoided by everyone... Soo..until i'll get that update(if),what can I do?
Reposting
Download this: TWRP 3.0.3 M4
https://redirect.viglink.com/?forma...eageOS 14.1 Weekly… | Asus ZenFone 2&txt=TWRP
Then flash it as an image using your existing TWRP.
It will confirm on which partition youll flash it, select 'recovery'
Once done, reboot.
Proceed to recovery and then flash the SU package provided in LOS thread.
You might want to consider downloading the SU zip add-on again just to ensure that your file is not corrupted.
It's a wind up
---------- Post added at 09:22 AM ---------- Previous post was at 09:17 AM ----------
timbernot said:
It's a wind up
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=cfyiIlygpAE
---------- Post added at 09:30 AM ---------- Previous post was at 09:22 AM ----------
Try reading and asking in lineageOS thread if you are struggling with flashing latest TWRP.
You need to flash latest TWRP to flash latest lineageOS . The TWRP required is in the Original Post of lineageOS ...
you have 3 0 2 2
You need 3 0 3 M4. From the Original Post of lineageOS.
---------- Post added at 09:32 AM ---------- Previous post was at 09:30 AM ----------
Refer to post 2 of this thread again
Here https://forum.xda-developers.com/showpost.php?p=71399662&postcount=2
shifty1023 said:
Reposting
Download this: TWRP 3.0.3 M4
https://redirect.viglink.com/?forma...eageOS 14.1 Weekly… | Asus ZenFone 2&txt=TWRP
Then flash it as an image using your existing TWRP.
It will confirm on which partition youll flash it, select 'recovery'
Once done, reboot.
Proceed to recovery and then flash the SU package provided in LOS thread.
You might want to consider downloading the SU zip add-on again just to ensure that your file is not corrupted.
Click to expand...
Click to collapse
Yeahh...It doens't shows the partition and anyway...it isn't the good recovery. I have Z00D
TheBT said:
Yeahh...It doens't shows the partition and anyway...it isn't the good recovery. I have Z00D
Click to expand...
Click to collapse
Pay attention to this very OLD post
https://forum.xda-developers.com/showpost.php?p=71091263&postcount=591
Go to download TWRP recovery from here >
https://forum.xda-developers.com/ze.../unofficial-cyanogenmod-14-1-nightly-t3516201
Which will take you to here >
https://drive.google.com/drive/folders/0B7jApZFEHXFudkJabnBMaEd5dmc
post 2 of this thread still applies even if you decided to waste peoples time
https://forum.xda-developers.com/showpost.php?p=71399662&postcount=2
Hello Guys
I have a big problem
I installed twrp and unlock bootloader with no problem
But i try to install a Lineage Os , but after all wipe and flashing it , my internal storage is erased , and when enter in TWRP There are only a Micro Sd not not Internal Storage
The value of Internal Storage is 0
I can Rescue my phone??
I'm not very happy
I need a big HELP
or i lose my money and wonderful Phone
Please help me
Repair that with twrp options
I try , i flash with minimal adb the firmware huawei with extractor, rom stock run , but the display is black , i can't enter in bootloader , how i can repair? i'm very busy
i don't understand
dadi90 said:
I try , i flash with minimal adb the firmware huawei with extractor, rom stock run , but the display is black , i can't enter in bootloader , how i can repair? i'm very busy
i don't understand
Click to expand...
Click to collapse
Oh man which firmware you flashed ?
---------- Post added at 08:16 PM ---------- Previous post was at 08:15 PM ----------
Another phones firmware relsults to device dead.
Help
venugopalu007 said:
Oh man which firmware you flashed ?
---------- Post added at 08:16 PM ---------- Previous post was at 08:15 PM ----------
Another phones firmware relsults to device dead.
Click to expand...
Click to collapse
I'll explain my situation
I unblocked the bootloader and installed the Twrp without any problems
But first flashing the AOP and then the Lineage, I had first lost the internal memory, then recovered it.
Now when flash roms mod, the smartphone is in bootloop
O BRICK
I'm trying to flash the original firmware, but when I put DLOAD in the SD i am mistaken
And also with Huawei's Erecovery
My Honor 8 pro is currently installed with TWRP, but I can not install an official ROM or not to run it.
I am desperate
info
dadi90 said:
I'll explain my situation
I unblocked the bootloader and installed the Twrp without any problems
But first flashing the AOP and then the Lineage, I had first lost the internal memory, then recovered it.
Now when flash roms mod, the smartphone is in bootloop
O BRICK
I'm trying to flash the original firmware, but when I put DLOAD in the SD i am mistaken
And also with Huawei's Erecovery
My Honor 8 pro is currently installed with TWRP, but I can not install an official ROM or not to run it.
I am desperate
Click to expand...
Click to collapse
P.S Before Unlock Bootloader , i have the b172 Europe , i'm italian but Honor 8 pro is from Netherderlands
You need to have B172 fullOTA, then follow these steps.
Boot into TWRP, then flash the update.zip, after that without rebooting flash update_full_DUK-L09_hw_xx.zip and update_data_full_public.zip files. Wait untill they finish.
Factory reset and you should be good
dadi90 said:
I'll explain my situation
I unblocked the bootloader and installed the Twrp without any problems
But first flashing the AOP and then the Lineage, I had first lost the internal memory, then recovered it.
Now when flash roms mod, the smartphone is in bootloop
O BRICK
I'm trying to flash the original firmware, but when I put DLOAD in the SD i am mistaken
And also with Huawei's Erecovery
My Honor 8 pro is currently installed with TWRP, but I can not install an official ROM or not to run it.
I am desperate
Click to expand...
Click to collapse
Italian honor 8 pro , can i know the firmware version to search for firmware.
info
PalakMi said:
You need to have B172 fullOTA, then follow these steps.
Boot into TWRP, then flash the update.zip, after that without rebooting flash update_full_DUK-L09_hw_xx.zip and update_data_full_public.zip files. Wait untill they finish.
Factory reset and you should be good
Click to expand...
Click to collapse
I try but when use files in TWRP , give me a error in recovery and i can't flash files
info
venugopalu007 said:
Italian honor 8 pro , can i know the firmware version to search for firmware.
Click to expand...
Click to collapse
i have first b122 and successfully updating with ota in 133
dadi90 said:
i have first b122 and successfully updating with ota in 133
Click to expand...
Click to collapse
So you got running good now??
dadi90 said:
i have first b122 and successfully updating with ota in 133
Click to expand...
Click to collapse
How good?
no , i can use my phone with OS , only with rom of Morph in guide stock, i extract the firmware with huawei extractor, and i flashed cust, system, boot,recovery with adb
Now Phone Run Os , but is a NRDM90 keys ,, don't working a camera and another function
I try with Twrp and recovery stock but give a error always
I feel like crying
I do not know how to do
To get it back stock
Or at least with a rom in twrp
Nothing works
I spent 500 euro of burned phone so
I am desperate
dadi90 said:
no , i can use my phone with OS , only with rom of Morph in guide stock, i extract the firmware with huawei extractor, and i flashed cust, system, boot,recovery with adb
Now Phone Run Os , but is a NRDM90 keys ,, don't working a camera and another function
I try with Twrp and recovery stock but give a error always
I feel like crying
I do not know how to do
To get it back stock
Or at least with a rom in twrp
Nothing works
I spent 500 euro of burned phone so
I am desperate
Click to expand...
Click to collapse
Bro now can you flash the firmware in twrp
Step one format data and reboot again and to twrp wipe all and flash the firmware.
---------- Post added at 12:09 PM ---------- Previous post was at 12:06 PM ----------
dadi90 said:
no , i can use my phone with OS , only with rom of Morph in guide stock, i extract the firmware with huawei extractor, and i flashed cust, system, boot,recovery with adb
Now Phone Run Os , but is a NRDM90 keys ,, don't working a camera and another function
I try with Twrp and recovery stock but give a error always
I feel like crying
I do not know how to do
To get it back stock
Or at least with a rom in twrp
Nothing works
I spent 500 euro of burned phone so
I am desperate
Click to expand...
Click to collapse
Also bro the nrd keys also appears when the firmware is different region.
flash with twrp or stock recovery? i downloaded all firmware from ru website
when i try in twrp , this method failed
i have bought a honor 8 pro in UNIEURO in ITALY , the product have name DUK-L09 from netherlands
how i can search the right firmware????
info
i formact data , reboot in recovery twrp
i do all wipe
i flashing and i have this error
error have name
i upload the image
Repair internal storage with repair option in TWRP
With type of partition? ext3??
dadi90 said:
With type of partition? ext3??
Click to expand...
Click to collapse
Try Ext 4 but i think this wont work , try the rebranding guide to unbrick