Related
First of all i would like to thank ->Tsing Yi qingyi @http://weibo.com/1048297887 for his effort to make this possible!!
As some fellas request....I'm Just giving a detailed guide for the process to have Dual-System{Dual_Boot} in our little dragon @rmani :laugh:
DOWNLOADS:
1.HM1S-Sysrec.zip: http://pan.baidu.com/s/1jGzfP3o
2.M1S-System-Menu1.3-test.zip: http://pan.baidu.com/s/1qWDN5u8
if want it in a simpler way download 3
3.Mokke + Miui.zip: http://pan.baidu.com/s/1sjCyI3z
:good: @bhushan2k
MIRROR Link: https://drive.google.com/folderview...NrYmkzLTN3WmlONEczVnlzajg0emo3ZHM&usp=sharing
WARNING!! : Installation of Dual System is Complecated, include data loss and may brick your devices and i'm not responsible for any kind of Loss or Failure..!!
CAUTION!! : During this Process, Your Phone gets Factory Reset and all internal memory gets wiped!! Make a Backup of all internal data as well as a nandroid to extrnal sd!!
***//For Users coming from MIUI rom and want to have MIUI on one of the Systems continue from step 1-2 and read NOTE and in step 3 tick the checkbox promting special!
STEP1:
Flash HM 1S-Sysrec.zip...[after flashing, recovery gets rebooted].......In this Process Phones Intrernal Memory gets formatted and current ROM gets Factory Reset!
STEP2:
Flash HM 1S-System-Menu1.3-test.zip...Select English->Press Next->Accept and Press Next->Enter the function->Install and uninstall->Install the dual system.....This installs Dual-System and gets rebooted to recovery, meaning dual system got installed!!
**NOTE 1 : If you wish to install mokee+MIUI which was provided #3 in download section.....You can flash that mokee+MIUI.zip here, without proceeding further...and reboot!!
**NOTE 2 : Now we have two System partitions installed and we are on system1, which already have the previous Rom residual and System2 is Void!!
**NOTE 3 : If you want to have a fresh Installation of AOSP Rom on System1, you can directly flash a AOSP rom of your choice! or continue with previous rom!
STEP3:
Now that we have a Rom in System1 [MIUI or a AOSP]....so we need to install system switching software in it....
Flash HM 1S-System-Menu1.3-test.zip, Follow the prompts to enter the main menu -> enter the function -> Install switching software -> System I-> Next [check special for MIUI users]...and reboot system!!
STEP4:
After the completion of boot process you will see a system changing app....open the app ->give root permissions and the phone gets rebooted and gets stuck at mi logo indicating we are in System2....Now Enter Reovery (Powr+VolUp same time)
STEP5:
Flash a ROM of your choice...."and dont reboot!"....after flashing rom again flash HM 1S-System-Menu1.3-test.zip, Follow the prompts to enter the main menu -> enter the function -> Install switching software -> System 2-> Next....now reboot !!!.. which will take you to ROM installed in System 2 ....
STEP6:
After the completion of boot process, now that you are in System2, will see a system changing app as well ....open the app ->give root permissions and you will be able to switch to the other system/ROM........
////**Manual System switching process: **///
Flash HM 1S-System-Menu1.3-test.zip Follow the prompts to enter the main menu -> enter the function ->System Switching -> and select a System of your choice and proceed and Finally reboot !!!
***///Wanna change rom or try a new ROM keeping the other still///***
Stay on the System on which you want to try a new ROM....Reboot to recovery...
Flash HM 1S-System-Menu-Test1.3.zip and Follow the prompts to enter the main menu -> enter the function ->clear data->
Continuing which will wipes and factory Resets the current Rom....After proceeding further enter RECOVERY....
and Flash the ROM u wanna Try...and repeat #STEP5 and install switching software on new system!!(Hope U Understand)!!!
For reverting back...we need to flash Sysrec.zip once again and flash Sysmenu.zip and follow uninstall procedure...then everything will be normal...
...for further questions comment below...............Give :good: if useful!!!....
Happy Flashing!!!
If anything Goes wrong...How to revert Back ?
Sent From My Redmi
1.Does we need to follow a unbrick tutorial
To revert back OR just restore a backup
2.Should we install twrp and continue or
Continue with philz recovery
3. Can we access system partition of system 2 from system 1 and vise versa
Sent from my Redmi 1S using XDA Free mobile app
can we use rom??and can i install custom kernel for both roms??
as9333 said:
1.Does we need to follow a unbrick tutorial
To revert back OR just restore a backup
2.Should we install twrp and continue or
Continue with philz recovery
3. Can we access system partition of system 2 from system 1 and vise versa
Sent from my Redmi 1S using XDA Free mobile app
Click to expand...
Click to collapse
For reverting back...we need to flash Sysrec.zip once again and flash Sysmenu.zip and follow uninstall procedure...then everything will be normal...
2.cwm or twrp...u can try philz.. Dunno..
3.We can browse sys2 directories from sys1 & vice versa
how can i restore my data on my first rom? help me plz
chauhansonu104 said:
how can i restore my data on my first rom? help me plz
Click to expand...
Click to collapse
I don't think restoring nandroid data will work... Because....as u can see there are two two folders inside root/data/.......by restoring data from recovery will first wipes current root/data content and writes content from backup....so no dual-system!!! Hope you understand....tell me whether u have installed dual system? If so once see inside root/data /....u will get it!
sathyakaushik4 said:
can we use rom??and can i install custom kernel for both roms??
Click to expand...
Click to collapse
We can install gapps for system1 and system 2 separately....and can install custom kernels as well...!
very good tutorial.. thnx for this.. I tried on my own and couldnt manage.. will try again this time following ur simple steps..
Just a doubt if we install cm r18 and PAC ROM with custom kernel can we install kernel patch for both the ROMs
Will cm work
Can we boot into sys 2 within recovery
If sys 1 got bootloop
Sent from my Redmi 1S using XDA Free mobile app
Great, Thanks for info, will try after my exams, one again Thank You Very Much.
@as9333
i guess we can switch between system 1 & 2 from recovery itself.. just flash the zip and explore through its aroma installer and see theres that option to switch...
as9333 said:
Just a doubt if we install cm r18 and PAC ROM with custom kernel can we install kernel patch for both the ROMs
Will cm work
Can we boot into sys 2 within recovery
If sys 1 got bootloop
Sent from my Redmi 1S using XDA Free mobile app
Click to expand...
Click to collapse
Note 1: Two Roms will be installed with two separate system partitions....all u can do things like installing custom add-ons or patches either being on system1 or system 2..use switching software to switch between system partition 1or 2...
Note 2: U can switch to system of ur choice from recovery...by flashing HM1s-system-menu.zip...there u will c an option to switch system...hope u understand if u had read the procedure with a bit of pathence!
Thanx alot bro! now im running miui 6 and carbon rc6..
a small doubt.. in the dual boot system menu there are 2 options saying system change(install systemchange and direc system change or sumthing) whats the second one? what will it do?
had hard time downloading from chinese server... here is gdrive mirror link @pawanzZ
N-Gavin said:
Thanx alot bro! now im running miui 6 and carbon rc6..
a small doubt.. in the dual boot system menu there are 2 options saying system change(install systemchange and direc system change or sumthing) whats the second one? what will it do?
Click to expand...
Click to collapse
Read note2 of the above replied post...ur doubt will be clarified!!
bhushan2k said:
had hard time downloading from chinese server... here is gdrive mirror link @pawanzZ
Click to expand...
Click to collapse
Mk+miui is not mandatory to download!!!.... Remaining 2 are <30mb...any ways u made it easy ...tnx for mirror!!
internal storage
Thnx for the great tutorial
but i still have few question
First ,do external storage also wipe out?
Second ,are app installed in each rom are shared among them,includin data?
Hsmetric181 said:
Thnx for the great tutorial
but i still have few question
First ,do external storage also wipe out?
Second ,are app installed in each rom are shared among them,includin data?
Click to expand...
Click to collapse
figured it out myself,for everybody else
won't format external sd card
and apps will be installed separately
Maybe some mistakes in step 2. The dev recommended unmount system, data and cache before installed Dual-System (doesn't matter really). Some user may need install it twice to success for unknown factors. And as I know on earlier versions, after you installed Dual-System, both partitions are empty. You need to flash a rom to system 1. But I haven't try v1.3 yet so I don't know if anything changed.
The tutorial seems so long but it's very reasonable to proceed.
1. (unnecessary for the 1st time) recover your phone's status - flash sysrec.zip
2. install the dual-boot system - flash into aroma and choose the option
3. flash a rom to current (1st) system - flash it in recovery
4. (optional but recommended) install a switcher in the rom - install it in the aroma, caution the options, don't choose the wrong system
5. switch to system2 - switch directly in the aroma, or [ boot your phone to use the switcher app (after that plz press vol+ to enter recovery because system2 is empty now)]
6. flash another rom to current (2nd) system - just flash it in recovery, it will be in system2
7. (optional but recommended) install a switcher in the rom - install it in the aroma, caution the options, don't choose the wrong system
now you have dual system installed.
For changing between systems, use the switcher (if installed) or change in the aroma installer.
For replacing a rom, switch to the rom you unwanted, and reboot to recovery and flash the new one.
For clear data, don't use recovery,it will clear both. Use the aroma (change to the system you want to clear data and choose clear current).
For miui user, special for miui is actually for miui 6 because /system/app can't get root permission in miui 6.
For uninstall, do it in aroma and then flash sysrec.zip
@pawanzZ
. theOne5OS
for OnePlus 5
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features
Based on Stock OxygenOS
=> My Custom Slashscreen - thanks to makers_mark for Injector tool
=> My Custom Bootanimation
=> Aroma Installer - thanks to amarullz
=> Root Choices- Magisk
=> Permissive Module
=> AdAway or Blokada
=> Debloater via Aroma
=> BusyBox Installer - thanks to osm0sis
=> Option to Choose Options Through Aroma without having to Install Full OS (Just UnCheck theOne5OS)
=> Viper4Android (must install Permissive Module)
=> Dolby Digital Plus
=> Rounded Recents (for Oreo - Use Ozone)
=> Rounded Corners (for Oreo - Use Ozone)
=> No Verity for those who are Decrypted (thanks to xXx)
=> Option for Stock Bootanimation/Splash Screen in Aroma
Thanks to c_86 for testing my betas and testing my Open Beta Roms due to I am not using/installing Open Betas on my 5
ROM OS Downloads
Installs OS, Boot Animation/Logo, Debloat options, and Root
Stable
Open Beta
Mirror
ROM Add-On Package Downloads
Installs Launchers, Apps, Magisk Modules and Sounds Mods
Download
Mirror
Launchers
Code:
Action Launcher
Lawn Chair Launcher - Pixel Edition
Nova Launcher
Apps
Code:
Adaway
Blokada
OZone
Curve *Not compatible with PIE
Substratum Theme Engine
Titanium Backup
Magisk Modules
Code:
BusyBox
CloudFlare DNS
Fingerprint Swip - Aswin08
Google Contacts and Dialer
Google Feed for OnePlus Launcher
Permissive
Samsung ONE UI Weather
YouTube Vanced
Wifi Bonding 2.4GHz
Sound Mods
Code:
Audio Modification Library
Viper4Android
Dolby Digital Plus
Dirty Flash/Update Install Instructions
-Must have Bootloader Unlocked and TWRP installed
!!!remove any Overlays if using Substratum!!!
1. Boot to TWRP
2. Make sure to always do a Nandroid Backup
3. Install theOne5OS Rom (Do Not Wipe Anything) (Make sure to choose a root and redo you debloating)
4. Install Add-On package and configure AROMA (Install apps if any, need to reinstall any modules or sounds mods unless new)
5. *Optional install Xposed (Not Compatible with Pie)
-Enjoy!
Clean Install Instructions (TWRP Bootloop Fix)
1. Boot to TWRP
2. Make sure to always do a Nandroid Backup
3. Wipe > Factory Reset (Do not wipe data in Advanced Wipe)
4. Wipe > Advanced Wipe > Caches, System and Vendor
5a. Install theOne5OS with Root and boot to OS (Do not install Add-On package yet)
5b. ***Reboot back into OS so Magisk Manager will load (You do not have to go through Setup yet)
6. Boot to TWRP and Install Add-On package and choose your options in Aroma
7. *Optional install Xposed (Not Compatible with Pie)
Setup OS and Enjoy!
Install Instructions - Encrypted To Decrypted Device
- Boot to TWRP
- Format Data (will wipe internal storage, make backup with OTG or to PC)
- Reboot to Recovery
- move files back to phone (ex. theOne5OS.vx.x)
- Install and in aroma check No Verity along with OS and Magisk in Root section
- Reboot to System (can take some time to decrypt device, if hangs just hold vol - and Power to reset)
-If device is already Decrypted and updating just Check No Verity when installing OS
Recommended TWRP
TWRP 3.3.0-x blu_spark v9.100
Screenshots
Splash Screen
Wallpaper + Boot anitmation
Rounded Recents
Color Accent Light
Color Accent Dark
Google Feed
Magisk Module Uninstaller
fixes bootlooping due to Magisk Modules - thanks to @veez21
uninmod_magisk-v3-20180406.zip
How to Use:
1. Flash in recovery (TWRP)
2. Go to TWRP's Terminal/ADB Shell (if you're not using twrp 3.x)
3. Type
Code:
uninmod
4. That should present you a list of modules you've installed
!!! I AM NOT RESPONSIBLE FOR ANY POSSIBLE DAMAGE DONE TO YOUR DEVICE AS A RESULT OF FLASHING AND I AM NOT RESPONSIBLE FOR ANY BRICKED PHONES OR LOST DATA... FLASH AT OWN RISK !!!
I have not flashed any custom roms or decrypted so I cannot provide support if coming from any other custom roms (even other custom OxygenOS roms) or having device being decrypted, seems like a lot of people are having issues with this and I am sorry, best I can say is read the OP for instructions, I will try to provided the best instructions from other members who know how to fix this issue. Thank you!
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------
My other Roms
theOne7ProOS - Magisk Module
theOne7OS - Magisk Module
theOne6TOS - Magisk Module
theOne6OS - Magisk Module
theOne5TOS
theOne3TOS
theOne3OS
Donations: Thank you so much!!!
@110112 - 5.00
@bigbaldbloke - 10.00
@preference - 10.00 @preference - 5.00 @preference - 15.00
@checko55 - 10.00
@grellsen - 10.00 @grellsen - 10.00 @grellsen - 10.83
If you like my work Donations are appreciated, You all are Amazing!!! and Thank You!!!
PayPal
Please Report Any Bugs. Thank You!
Change Log
theOne5OS
Open Beta
35
34
33
32
30
29
28
27
26 *FIX*
25
Stable
9.0.7
9.0.6
9.0.5
9.0.4
9.0.3
9.0.2
9.0.1
Add-On Package
v1.9.2
v1.9.1
v1.9
v1.8
v1.7
v1.6
v1.5
v1.4
v1.3
v1.1
reserve 2
Great rom, thank you Dev!!!!
Glad to see someone is here in competition to xXx no limit rom .
Thanks dev will surely try it today
Ooooooo something new ?
Sent from my OnePlus 5 using XDA Labs
I am not able to install as after aroma setup when there should be installation , there it directly says installation done .
no install
Aarju said:
I am not able to install as after aroma setup when there should be installation , there it directly says installation done .
Click to expand...
Click to collapse
I second that , nothing gets installed in Aroma
thescorpion said:
I second that , nothing gets installed in Aroma
Click to expand...
Click to collapse
Very true
It was ging to go download now
I'll wait a bit more
New goodies... Thank you.
Bradl79 said:
theOne5OS
for OnePlus 5
Features
Based on OxygenOS
=> My Custom Slashscreen - thanks to makers_mark for Injector tool
=> My Custom Bootanimation
=> Aroma Installer - thanks to amarullz
=> Root Choices- Magisk or SuperSU
=> Permissive v1.1 - thanks to jamal2367
=> AdAway
=> Debloater via Aroma
=> BusyBox Installer - thanks to osm0sis
=> Option to Choose Options Through Aroma without having to Install Full OS (Just UnCheck theOne5OS)
=> A.R.I.S.E. (must install Permissive Module)
=> DolbyATMOS (not working in OREO)
=> Rounded Recents (for Oreo - Use Ozone)
=> Color Accents (for Oreo - Use Ozone)
=> Option for Stock Bootanimation/Splash Screen in Aroma
=> Substratum Theme Engine (Option in Aroma)
=> Ozone Theme - thanks to ungeeked (Option in Aroma)
=> Dark Google Feed (Substratum theme)
Thanks to c_86 for testing my betas and testing my Open Beta Roms due to I am not using/installing Open Betas on my 5T
Downloads
click on the image
Install Instructions - First Install
-Must have Bootloader Unlocked and TWRP installed
-Boot to TWRP
-Make sure to always do a Nandroid Backup
-Clear Dalvik, Cache, System, and Data (Do not Clear SD Card)
-Install theOne5OS
-Configure in AROMA
-Reboot back to TWRP and Reboot to System
-(Optional) Once Setup boot back into TWRP to install Xposed
-Enjoy!
Install Instructions - Updating
same steps as above, do not clear Data
Updating from Nougat to Oreo
Do the Following - thanks to @denogun
if you have Encryption issues u will have to format data
My method of upgrading from OOS 4.7.6 to 5.0.2 with Magisk Root:
1. Flash the latest Codeworkx or Blu_Spark TWRP (I used Codeworkx) from within your old TWRP or use Fastboot
2. Boot into the newly flashed TWRP
3. Flash the Full 5.0.2 zip from OOS servers
4. Clear Dalvik/Cache
5. Reboot - Do not install Magisk at this point!
6. Let OOS 5.0.2 boot up and complete the upgrade to Oreo first
7. Boot into Fastboot and re-flash the TWRP image from step 1.
8. From fastboot, boot into the TWRP image and then immediately flash Magisk
9. Clear Dalvik/Cache if you'd like
10. You can now Clean flash theOne5OS 2.x or OB
Installation for TWRP Bootloop
Thanks to @Rambotic
Install Guide WORKS 100%
Hello everybody I had some problems with the installation and I also read through the whole pages. Then I found the solution
An installation guide for anyone who lands in the TWRP Bootloop after installation.
Also for those who can not do it!
Very simple
step by step.
-First backup all ur Date to PC (picture etc.) THIS IS A CLEAN INSTALL!!!
- Download theOne5OS.2.1-5.0.3.Aroma.zip or theOne5OS.1.6-4.7.6.Aroma.zip, witch Version u want! (do download to ur PC!) Go to Page 1
- Download no_verity_op5_v2.zip (do download to ur PC!)
- Download newst Magisk v16.0 (do download to ur PC!)
- Flash TWRP > i use the "TWRP Blu_Spark", so had no problems
- Go into Recovery > Wipe > Format Data, type: yes > go back "Press Home" > go into Rebot> select Recovery.
- after rebot into Recovery Go into Wipe > Advanced Wipe > Select Dialvik/ART Cache, Cache, System, Data and Swipe to Wipe. (Do not select Internal Storage!!!)
- After Wipe go back to Home(Press Home button!)
- Connect ur Phone to ur PC.
- put ur Downloaded Data > theOne5OS zip, no_verity zip and Magisk zip into ur Phone
- back to TWRP >go to Install and select First (now Step by step!!!!!!!!!!)
1. theOne5OS zip > Go to Install SWIPE > select Install theOne5OS -next > Select what u want Custom boot and Slashscreen -next
2. select ur Debloater apps (select standard System apps which you do not want to have) -next
3. select if u want instal Substratum, xposed etc. -next
4. at Su or Magisk select > select Install no SU and go -next
5. do not select! Premissive Magisk -next
6. do not select! A.R.I.S.E. -next
7. Now Install Rom, after end select back to TWRP and press END.
8. Back to TWRP press Home button to go to Home
9. Go into install, select no_verity zip and install it! After install Press again Home
10. Go into Install, select Magisk zip and install it! After install if u want install ARISE sound modul check step 11, if not skip and do restart ur Phone and have fun )
11. After install Magisk go Home again
12. Go into Install, select theOne5OS zip Again! NOW!!!
13. Skip Rom Install deselect it next > again Select what u want Custom boot and Slashscreen next> at Debloater Skip, only next Do not select now anythink > Substratum Menu Skip to Do not select anythink > at Magisk select No install SU next > now select Install Permissive Magisk Modul and next > now select ARISE next > now install it > after install only restart Phone and have Fun
so now you cant go into bootloop!
i know its a very long guide and its rly step by step but i think here a many user who want USE the Rom and have many problems to understand!
I hope I could help some
greets Rambotic
Recommended TWRP
Blu_Spark TWRP
Screenshots
Splash Screen
Wallpaper + Boot anitmation
Rounded Recents
Color Accent Light
Color Accent Dark
Google Feed
!!! I AM NOT RESPONSIBLE FOR ANY POSSIBLE DAMAGE DONE TO YOUR DEVICE AS A RESULT OF FLASHING AND I AM NOT RESPONSIBLE FOR ANY BRICKED PHONES OR LOST DATA... FLASH AT OWN RISK !!!
Possible Bug:
-Magisk Modules may not install if data is wiped, stating Magisk is not installed please install Magisk (version number+)
fix - Boot into System and Once set up boot back into TWRP and reinstall the magisk modules you want and uncheck all other options like theOne5OS and Magisk
-Not a bug, But if you install the OS without a root you may be encrypted (if decrypted) and may reinstall Stock Recovery.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------
My other Roms
theOne5TOS
theOne3TOS
If you like my work Donations are appreciated - Thank You!!!
PayPal
Please Report Any Bugs. Thank You!
Click to expand...
Click to collapse
Hello
Happy to see another ROM here.
I have tried to install the rom but when i try to reboot my phone , TWRP noticed me that there is no OS installed. Any help?? Tkhs
ZEUSROI said:
Hello
Happy to see another ROM here.
I have tried to install the rom but when i try to reboot my phone , TWRP noticed me that there is no OS installed. Any help?? Tkhs
Click to expand...
Click to collapse
Explain which twrp you used and the steps taken.
No quote OP!
Inviato dal mio ONEPLUS A5000 utilizzando Tapatalk
morfances said:
Explain which twrp you used and the steps taken.
No quote OP!
Inviato dal mio ONEPLUS A5000 utilizzando Tapatalk
Click to expand...
Click to collapse
I tried with Blu spark and the codework twrp same result the aroma not detecting the system file .
This thing does not reassure me ... I wait for the positive response of some other user
Inviato dal mio ONEPLUS A5000 utilizzando Tapatalk
ROM doesn't want to install after aroma configuration.
no OP5 to test, so if there is someone out there who wants to be my tester, not sure whats going on here
what errors are you getting after aroma, does it say it successfully installed? and doesn't? need some more info guys.
Bradl79 said:
what errors are you getting after aroma, does it say it successfully installed? and doesn't? need some more info guys.
Click to expand...
Click to collapse
It says that installation successful in no time and then reboot to twrp is ticked above when we reboot back to twrp and then to system there is no system file installed .
---------- Post added at 03:27 AM ---------- Previous post was at 03:27 AM ----------
Bradl79 said:
no OP5 to test, so if there is someone out there who wants to be my tester, not sure whats going on here
Click to expand...
Click to collapse
Yes I can do for you .
I'm not the Author, the author is wzsx150 from LR.TEAM
WZSX’s TWRP is well-known as the Chinese version of TWRP due to the language default is in Chinese. However, you can switch to English within TWRP user settings it's easily. switched. You can follow the instructions on this link to change the language to English: https://miui.blog/any-devices/lr-tea...inese-english/
Xiaomi 8's LR.Team customized version of Twrp
Automatically decrypts data, Includes root functionality, clear the power-on password, multi-function restart.
Disclaimer: I have installed it and for me it works fine. However, it is not guaranteed to work for you especially if you currently have encryption. Use at your own risk
If you need help flashing TWRP : Follow instructions here: https://miui.blog/mi-8/flash-twrp-root-mi-8/
Downloads
Latest
Version for Miui 11 Android 10/Q : https://www.androidfilehost.com/?fid...26312261636230
MD5: 2f5f2e7dc8f32b5a999828c9370b7de2
Version for Miui 10 or 11 Android 9/P : https://www.androidfilehost.com/?fid...26312261636232
MD5: 4681f9bd6367f934218da71fd528e39b
Old Versions
TWRP-3.2.3.1-FireDance-Edition (English) ( img)
TWRP 3.2.3-1208 (English) ( zip - img )
TWRP 3.2.3-1110 (English) ( zip - img )
TWRP 3.2.3-1110 ( zip - fastboot - img )
TWRP 3.2.3-0918 (zip - fastboot - img)
TWRP 3.2.3-0908 (zip - fastboot - img)
TWRP 3.2.2-0703 (zip - fastboot - img)
TWRP 3.2.2-0611 (zip - fastboot - img)
TWRP 3.2.2-0609 (zip - fastboot - img)
Changelog (Google Translated)
2018.11.10 update Contents:
1. Update the new rom that supports the official Android 9.
2. Update and optimize some functions
3. Increase the option to restart after the automatic upgrade is completed. In the twrp setting, the default is automatic restart. Uncheck the box and you can not restart. After the automatic upgrade, some operations are performed to prevent twrp from being overwritten, etc.
4. Update the built-in root to magisk 17.1, and fix the problem that the module cannot be brushed. Other features are also updated and optimized
5. After the new version of the system root, restarting the system requires manual installation of the magisk app, the official system problem, this can only be so
. 6. If Kami may need the root system or remove the dm check operation.
7. Prevent the functions covered by the official rec: root system, signature boot, remove dm check, cancel forced encryption, etc.
2018.9.8 update:
1. Support the official Android 9.0 system, including automatic decryption data
2. About data decryption, this may not be particularly stable now, sometimes need to reboot into the system and then restart Twrp can be decrypted.
If the new version of twrp is not supported, you can try to use the old version of
2018.8.6 update:
1. Update twrp 3.2.3 source code
2. Built-in magisk16.7, temporarily build this version first
3. Optimize data decryption problem, fix some problems
4 Support the new version of miui10 data decryption
5. Decrypt the plaintext display input password, easy to check whether the password input is correct
6. Update to try to repair the decryption data scheme, set the lock screen password to the machine, enter twrp need to enter the lock screen Password, otherwise you cannot temporarily decrypt data.
7. After brushing in twrp, the first time you enter twrp may restart once. This is normal. If you restart repeatedly, or you can't decrypt data, please give me feedback on Weibo.
8. Regarding data decryption, this may not be particularly stable now. Sometimes you need to reboot into the system and restart into twrp to decrypt.
If the new version of twrp is not supported, you can try to use the old version of
Thanks. I was already using the EN version you posted in the Dogsly(that may be wrong) thread.
Great job
arifqur said:
Thanks. I was already using the EN version you posted in the Dogsly(that may be wrong) thread.
Great job
Click to expand...
Click to collapse
@gulp79 is to thank for the English version
mikefallen said:
@gulp79 is to thank for the English version
Click to expand...
Click to collapse
if you want to add to op, this is the img version of TWRP-3.2.3-1110-XIAOMI8-EN-wzsx150
(with a minor modifications of prop.default, and also with chinese language, in previous version chinese was removed, btw english is set as default).
https://mega.nz/#!MwQn3IgR!UmuuBk1OScPrHi_HUO1zA_Da0df3nexfrrWGEBGjJPg
gulp79 said:
if you want to add to op, this is the img version of TWRP-3.2.3-1110-XIAOMI8-EN-wzsx150
(with a minor modifications of prop.default, and also with chinese language, in previous version chinese was removed, btw english is set as default).
https://mega.nz/fm/M4oDgLxA
Click to expand...
Click to collapse
that link doesn't seem to work for me, just redirects to the home page of mega
mikefallen said:
that link doesn't seem to work for me, just redirects to the home page of mega
Click to expand...
Click to collapse
try this
https://mega.nz/#!MwQn3IgR!UmuuBk1OScPrHi_HUO1zA_Da0df3nexfrrWGEBGjJPg
gulp79 said:
try this
https://mega.nz/#!MwQn3IgR!UmuuBk1OScPrHi_HUO1zA_Da0df3nexfrrWGEBGjJPg
Click to expand...
Click to collapse
yup added to OP Thanks!
Help!!!
It works for mi 8 miui 10.0.3.0 global?, i cant figure out how install the eu rom, in the twrp show me only folders encrypted :C, somebody knows how ?
Looks like you will have to format Dara partition in recovery by typing yes
So, boot the img and then flash the zip for TWRP to stick permanently?
Can't use gapps Aroma installer using twrp .. any ideas ?
could this twrp support amora installer
could this twrp support amora installer?
On my MI 8, i restored a previous backup made with twrp, now the device does not accept my 4-digit password so I can't login to my phone!
please help!
cyaneo said:
On my MI 8, i restored a previous backup made with twrp, now the device does not accept my 4-digit password so I can't login to my phone!
please help!
Click to expand...
Click to collapse
in twrp go to file manager, data, system and delete locksettings file. reboot and you're good to go again
Hi!
Help me, please!
I can't exit from recovery mode on MI8
cyaneo said:
On my MI 8, i restored a previous backup made with twrp, now the device does not accept my 4-digit password so I can't login to my phone!
please help!
Click to expand...
Click to collapse
Go into recovery mode, format internal memory.
---------- Post added at 06:24 AM ---------- Previous post was at 06:22 AM ----------
Coolesha said:
Hi!
Help me, please!
I can't exit from recovery mode on MI8
Click to expand...
Click to collapse
You need to format your device.
bahuy2003 said:
Go into recovery mode, format internal memory.
Click to expand...
Click to collapse
ok, but doesn't this delete all my settings & personal files (aka reset to default)?
Thank you!
cyaneo said:
ok, but doesn't this delete all my settings & personal files (aka reset to default)?
Thank you!
Click to expand...
Click to collapse
If you device can't reboot, you can flash eu or global rom, format again and reboot system.
bahuy2003 said:
If you device can't reboot, you can flash eu or global rom, format again and reboot system.
Click to expand...
Click to collapse
Hu? never wrote it doesn't reboot etc. - It reboots, everything seems to be OK - I "just" can't login after restore a backup....
so, again: does "format internal memory" reset my phone, delete setting or personal files? If so, how does this solve the problem? After a fresh EU ROM install, everything works fine like a new install does.
cyaneo said:
Hu? never wrote it doesn't reboot etc. - It reboots, everything seems to be OK - I "just" can't login after restore a backup....
so, again: does "format internal memory" reset my phone, delete setting or personal files? If so, how does this solve the problem? After a fresh EU ROM install, everything works fine like a new install does.
Click to expand...
Click to collapse
Flash this zip in TWRP and your login password would be deleted, which by the way gets jumbled up after a restore.
Hi guys,
I'm about to sell my Mi 6 to upgrade to the K20 Pro and I would like to reinstall the latest MIUI 10 before giving my mobile away.
So as you read on the title I have the latest PE Pie CAF edition and I would like to be sure of all the steps to be done to install MIUI 10 without hassles. I have the latest TWRP 3.3.1-2
I have a Mac so the fastboot option is not my favourite one and I would prefer to use TWRP. I googled a bit and saw some youtubers reverting back to MIUI by entering TWRP and wiping
Dalvik / ART cache
Cache
System
Vendor
Data
Then install MIUI 10 ROM
wipe cache/dalvik
And then reboot system even if it says "No OS installed"
Some people installed lazy flash zip file as well. Some others didn't wipe Vendor and some wiped Internal Storage as well and installed the ROM via OTG. I couldn't find any guide/tutorial with a Mi6 and that's why I'm posting here.
What would you suggest? Do I need the lazy flash zip as well? Do I need to wipe Vendor partition and Internal Storage as well?
Thank you in advance for any experienced advice.
Install MIUI via MiFlash
worldwidegigio said:
Hi guys,
I'm about to sell my Mi 6 to upgrade to the K20 Pro and I would like to reinstall the latest MIUI 10 before giving my mobile away.
So as you read on the title I have the latest PE Pie CAF edition and I would like to be sure of all the steps to be done to install MIUI 10 without hassles. I have the latest TWRP 3.3.1-2
I have a Mac so the fastboot option is not my favourite one and I would prefer to use TWRP. I googled a bit and saw some youtubers reverting back to MIUI by entering TWRP and wiping
Dalvik / ART cache
Cache
System
Vendor
Data
Then install MIUI 10 ROM
wipe cache/dalvik
And then reboot system even if it says "No OS installed"
Some people installed lazy flash zip file as well. Some others didn't wipe Vendor and some wiped Internal Storage as well and installed the ROM via OTG. I couldn't find any guide/tutorial with a Mi6 and that's why I'm posting here.
What would you suggest? Do I need the lazy flash zip as well? Do I need to wipe Vendor partition and Internal Storage as well?
Thank you in advance for any experienced advice.
Click to expand...
Click to collapse
If you're on a mac, you can:
- download fastboot rom
- extract it
- run flash_all.sh (not really sure of the name right now but it's one of them ) file in the terminal
- done
Unfortunately Mi Flash doesn't work on a Mac ...
Thanks anyway
Ad3s12 said:
Install MIUI via MiFlash
Click to expand...
Click to collapse
I guess that's the way to go...But then I think I'll need to check if the adb/fastboot tools work on macOS 10.13
Thanks
xikz said:
If you're on a mac, you can:
- download fastboot rom
- extract it
- run flash_all.sh (not really sure of the name right now but it's one of them ) file in the terminal
- done
Click to expand...
Click to collapse
I am trying to get Magisk to work on my Xiaomi Redmi Note 8T with Lineage OS, but the step where I am patching the boot.img is failing. I am using LOS recovery, and I followed the instructions provided by topjohnwu [1]: because the 8T doesn't appear to have ramdisk (I don't know what that means btw), I need to patch an image (my recovery image?) with the magisk app - this is what I did:
1. Install Magisk App and check status: "Ramdisk: No"
2. Download Lineage recovery image [2] and patch in Magisk
3. Install patched recovery image using fastbook [3]
4. Wipe device and Install LOS + GApps
5. Reboot to system => still says "Ramdisk: No"
What am I doing wrong? How did everyone else root their Note 8T?
[1] https://topjohnwu.github.io/Magisk/install.html
[2] https://download.lineageos.org/ginkgo
[3] https://wiki.lineageos.org/devices/ginkgo/install#installing-a-custom-recovery-using-fastboot
---
EDIT: I just found this: https://github.com/topjohnwu/Magisk/issues/3239 - does that mean it worked? Doesn't look it did...I don't think I have root
lueromat said:
I am trying to get Magisk to work on my Xiaomi Redmi Note 8T with Lineage OS, but the step where I am patching the boot.img is failing. I am using LOS recovery, and I followed the instructions provided by topjohnwu [1]: because the 8T doesn't appear to have ramdisk (I don't know what that means btw), I need to patch an image (my recovery image?) with the magisk app - this is what I did:
1. Install Magisk App and check status: "Ramdisk: No"
2. Download Lineage recovery image [2] and patch in Magisk
3. Install patched recovery image using fastbook [3]
4. Wipe device and Install LOS + GApps
5. Reboot to system => still says "Ramdisk: No"
What am I doing wrong? How did everyone else root their Note 8T?
[1] https://topjohnwu.github.io/Magisk/install.html
[2] https://download.lineageos.org/ginkgo
[3] https://wiki.lineageos.org/devices/ginkgo/install#installing-a-custom-recovery-using-fastboot
---
EDIT: I just found this: https://github.com/topjohnwu/Magisk/issues/3239 - does that mean it worked? Doesn't look it did...I don't think I have root
Click to expand...
Click to collapse
install OrangeFox recovery
rename Magisk22.APK to Magisk22.ZIP
install it like any zip in recovery
reboot
(i suggest you do a clean flash to avoid problems)
(yess, RN8 have ramdisk but that's not required for root to work)
After clean flashing the official LOS 17.1, I re-tried to install Magisk giving it every request permission and following steps detailed above by loopypalm but (as before) I'm still seeing "Requires Additional Setup" followed by a "Setup failed" message...
I unlocked the phone recently, set up the latest OrangeFox recovery and flashed new RN8 global firmware v12.0.4.0, Lineage v17.1 nightly 20210405 and pico OpenGapps 20210406. The phone isn't even encrypted (i.e., I've set no fingerprint, pin or pattern).
I tried removing Magisk v22 with the official uninstaller and downgrading to v21.4 with the same result. Then I used the Manager facilities to upgrade both Manager and the underlying Magisk, but still no dice.
I'm scratching my head here about what else to try. Something I noticed that may or may not be related is, while it was working alright before I started setting up Magisk, advanced reboot became really sluggish and failed to reboot to recovery after this (only buttons work).
I'll keep searching and will maybe try a different ROM but this is a real bummer.
loopypalm said:
install OrangeFox recovery
rename Magisk22.APK to Magisk22.ZIP
install it like any zip in recovery
reboot
(i suggest you do a clean flash to avoid problems)
(yess, RN8 have ramdisk but that's not required for root to work)
Click to expand...
Click to collapse
after installing LOS, GApps and Magisk in OrangeFox, and then booting to system, the phone is stuck at the sim PIN entry - I can enter it, but it doesn't advance afterwards. this is what I did:
1. Install TWRP
2. Use TWRP to install OF
3. in OF, wipe everything except usbstorage and sdcard
4. create installation queue with latest LOS, GApps, and Magisk, and install
5. boot to system => stuck at sim PIN entry
any suggestions?
i have the same with the latest LOS 17.1 tried also 21.4 both not working, I flashed again without Magisk so far
cali.s said:
i have the same with the latest LOS 17.1 tried also 21.4 both not working, I flashed again without Magisk so far
Click to expand...
Click to collapse
I hit "Emergency", went back to the PIN mask, and then it would accept my SIM pin. So far so good...
pnin said:
After ...
Click to expand...
Click to collapse
please follow instruction and do not add/remove a step
-flash OFox (if you already have it = no need)
-reboot to recovery
-flash latest A10 stable FW RN8 Ginkgo / RN8T Willow
-format data (not wipe) (this will erase internal storage!)
-reboot to recovery
-wipe 5 (cache/dalvik/system/vendor/data)
-flash the rom you want
-flash kernel (if you have any)
-flash DFE
-format data again
-reboot to recovery
-reboot to system
-reboot to recovery and flash magisk
done
lueromat said:
after installing LOS, GApps and Magisk in OrangeFox, and then booting to system, the phone is stuck at the sim PIN entry - I can enter it, but it doesn't advance afterwards. this is what I did:
1. Install TWRP
2. Use TWRP to install OF
3. in OF, wipe everything except usbstorage and sdcard
4. create installation queue with latest LOS, GApps, and Magisk, and install
5. boot to system => stuck at sim PIN entry
any suggestions?
Click to expand...
Click to collapse
i heard about that bug
remove the pin from the sim in another phone
loopypalm said:
-flash the rom you want
-flash kernel
-flash DFE
Click to expand...
Click to collapse
The ROM I want is the official Lineage -- I'm no hardcore flasher, just want to take it easy with a tried and tested custom ROM. But the kernel and DFE got me stumped: do I really need them? Which ones?
pnin said:
The ROM I want is the official Lineage -- I'm no hardcore flasher, just want to take it easy with a tried and tested custom ROM. But the kernel and DFE got me stumped: do I really need them? Which ones?
Click to expand...
Click to collapse
i think you should try RRos (it's based on LOS and updated)
i said kernel, so if you have one in mind, that's the step (correct order) you flash it in
(people use "sixteen" for battery,or default "quicksilver" ,or ryzen or ...)
DFE is "Disables dm-verity, forced encryption"
lueromat said:
after installing LOS, GApps and Magisk in OrangeFox, and then booting to system, the phone is stuck at the sim PIN entry - I can enter it, but it doesn't advance afterwards. this is what I did:
1. Install TWRP
2. Use TWRP to install OF
3. in OF, wipe everything except usbstorage and sdcard
4. create installation queue with latest LOS, GApps, and Magisk, and install
5. boot to system => stuck at sim PIN entry
Click to expand...
Click to collapse
lueromat said:
I hit "Emergency", went back to the PIN mask, and then it would accept my SIM pin. So far so good...
Click to expand...
Click to collapse
so in the end this worked, LOS + root, and no complaints so far.
other users were also successful with not sticking to the official magisk installation instruction, but just flashing the zip in recovery: https://github.com/topjohnwu/Magisk/issues/3239#issuecomment-816164610
guess this is the way to go for willow
loopypalm said:
please follow instruction and do not add/remove a step
-flash OFox (if you already have it = no need)
-reboot to recovery
-flash latest A10 stable FW RN8 Ginkgo RN8T Willow
-format data (not wipe) (this will erase internal storage!)
-reboot to recovery
-wipe 5 (cache/dalvik/system/vendor/data)
-flash the rom you want
-flash kernel (if you have any)
-flash DFE
-format data again
-reboot to recovery
-reboot to system
-reboot to recovery and flash magisk
done
Click to expand...
Click to collapse
Hi loopypalm, only for curiosity: is there a reason why to wipe /data "again" in step 6 after having formatted /data already in step 4? And furthermore why to format /data for a second time in step 10? What happens to /data after the first formatting that makes these steps recommendable? Thx if you find a minute to explain...
HI , this is what devs been recommending since the beginning (on ginkgo)
Uluru25 said:
is there a reason why to wipe /data "again" in step 6 after having formatted /data already in step 4?
Click to expand...
Click to collapse
no
Uluru25 said:
And furthermore why to format /data for a second time in step 10? What happens to /data after the first formatting that makes these steps recommendable?
Click to expand...
Click to collapse
me personally i don't think formatting data a 2nd time is necessary
but as for what i think could be the reason is after formatting data you will get a "raw" file system , so the OS will choose the situable file system for it "EXT2" or "EXT4" or ...
that's why sometimes the system wont boot even if you flash DFE
(which (i think) is the case on all ports like ONEUI or OOS ...)
loopypalm said:
please follow instruction and do not add/remove a step
-flash OFox (if you already have it = no need)
-reboot to recovery
-flash latest A10 stable FW RN8 Ginkgo / RN8T Willow
-format data (not wipe) (this will erase internal storage!)
-reboot to recovery
-wipe 5 (cache/dalvik/system/vendor/data)
-flash the rom you want
-flash kernel (if you have any)
-flash DFE
-format data again
-reboot to recovery
-reboot to system
-reboot to recovery and flash magisk
done
Click to expand...
Click to collapse
loopypalm,
- Orange Fox, should "Allow modifications" be enabled OR "keep read-only"?
- will latest A11 (anrdoid 11) stable FW (Firmware) also be ok, or is this guide specifically for A10?
Other notes of mine:
- OrangeFox requires device to be unlocked with MiFlash unlocking software first. (It's a type A device it seems, NOT a/b)
jddcef said:
- Orange Fox, should "Allow modifications" be enabled OR "keep read-only"?
Click to expand...
Click to collapse
allow Read & write
jddcef said:
- will latest A11 (anrdoid 11) stable FW (Firmware) also be ok, or is this guide specifically for A10?
Click to expand...
Click to collapse
this guide is for all rom, if you are using A11 then use A11 FW
jddcef said:
- OrangeFox requires device to be unlocked with MiFlash unlocking software first. (It's a type A device it seems, NOT a/b)
Click to expand...
Click to collapse
The Ofox i linked is for Ginkgo/Willow if you have this device + unlocked BL = just flash