I hope starting a new thread is the way to go on this...
I just updated to the new Sprint Official WM 6.1 ROM, and immediately could not connect to the internet.
I tried running the IOTA automatic data provisioning update (Start->Settings->Personal Tab->Phone->Services Tab->Internet->Get Settings->Start) and it failed repeatedly with a 1012 error. As was posted by others, I noticed that there was a "CurrentUserName" setting in Start->Settings->System->Device Information that had [email protected] where I would have expected to see [email protected] instead. (that would have been my Sprint provided email address) The first thing I tried was to go to the phone dialpad and dial ##3282# to start the EPST program and check my data provisioning settings (this requires that you know your MSL - Master Service Lock Code - if you are going to edit). UserName was blank there, so I tapped the blank setting and held down until an "EDIT" menu popped up. I tapped "EDIT" and changed it to the previously correct [email protected] value. After saving changes and another reboot, I still could not connect to the internet, run IOTA, and the "CurrentUserName" was still wrong. After searching through various settings looking for a way to change the currentusername, I installed PHM Registry Editor and searched again.
In HKEY_LOCAL_MACHINE/Software/OEM/DIM there is a key "EnableCurrentUserName" and it was set to 1. I edited that and set it to 0, exited the Registry Editor, and restarted the device by holding the power button until it warned me about shutting down. I tapped "Yes" and it shut down and restarted. The "CurrentUserName" setting no longer appeared in the Device Information page. At this point I was able to run IOTA successfully and imediately after that I could use the internet and other data services.
I hope this helps someone. Sorry to be so long winded, but I was trying to answer as many "How? Where?" questions as I could as I went.
Briefly:
1. Using WM Registry Editor software, change HKLM/Software/OEM/DIM/"EnableCurrentUserName" from 1 to 0 then save changes and exit editor.
2. Dial ##3282# and edit UserName to correct [email protected] address. Device will reboot when you exit and save changes.
3. Run IOTA by going to Start->Settings->Personal Tab->Phone->Services Tab->Internet->Get Settings->Start
Thanks to all the others here who have helped me along the way,
Scruffy
anyone else know if this works?
i just flashed the new sprint rom and now the data connection does not work.. no internet.. ? I was just wondering if anyone else had this problem and does this fix it?
After some more time with this ROM installed I have found that it is not neccessary to change the ##DATA# (##3282#) user name settings. Just change the HKEY_LOCAL_MACHINE/Software/OEM/DIM/EnableCurrentUserName value to zero, save changes and then you can run the IOTA update successfully (or at least I can).
I have found that I need to do this every time I do a hard reset of my device. I hope this helps someone else.
Scruffy
this did not work for me.. I Get error code 67
i started a new thread here........ http://forum.xda-developers.com/showthread.php?t=415666
so maybe someone will chime in... the ##3282# does not work for me at all.. you hit that on the dial pad and nothing happens... so i can not access that menu...
For now i went back to a OEM rom and called sprint and they got me working by doing a MASTER RESET... also ##3282# works on OEM roms but i think the file EPST.EXE is missing from the CUSTOM roms... any input would be great..
Not working for me.
i'm sure a master reset from within #778 or whatever would work but i don't feel like
putting in the data again.
Scruffy said:
I hope starting a new thread is the way to go on this...
I just updated to the new Sprint Official WM 6.1 ROM, and immediately could not connect to the internet.
I tried running the IOTA automatic data provisioning update (Start->Settings->Personal Tab->Phone->Services Tab->Internet->Get Settings->Start) and it failed repeatedly with a 1012 error. As was posted by others, I noticed that there was a "CurrentUserName" setting in Start->Settings->System->Device Information that had [email protected] where I would have expected to see [email protected] instead. (that would have been my Sprint provided email address) The first thing I tried was to go to the phone dialpad and dial ##3282# to start the EPST program and check my data provisioning settings (this requires that you know your MSL - Master Service Lock Code - if you are going to edit). UserName was blank there, so I tapped the blank setting and held down until an "EDIT" menu popped up. I tapped "EDIT" and changed it to the previously correct [email protected] value. After saving changes and another reboot, I still could not connect to the internet, run IOTA, and the "CurrentUserName" was still wrong. After searching through various settings looking for a way to change the currentusername, I installed PHM Registry Editor and searched again.
In HKEY_LOCAL_MACHINE/Software/OEM/DIM there is a key "EnableCurrentUserName" and it was set to 1. I edited that and set it to 0, exited the Registry Editor, and restarted the device by holding the power button until it warned me about shutting down. I tapped "Yes" and it shut down and restarted. The "CurrentUserName" setting no longer appeared in the Device Information page. At this point I was able to run IOTA successfully and imediately after that I could use the internet and other data services.
I hope this helps someone. Sorry to be so long winded, but I was trying to answer as many "How? Where?" questions as I could as I went.
Briefly:
1. Using WM Registry Editor software, change HKLM/Software/OEM/DIM/"EnableCurrentUserName" from 1 to 0 then save changes and exit editor.
2. Dial ##3282# and edit UserName to correct [email protected] address. Device will reboot when you exit and save changes.
3. Run IOTA by going to Start->Settings->Personal Tab->Phone->Services Tab->Internet->Get Settings->Start
Thanks to all the others here who have helped me along the way,
Scruffy
Click to expand...
Click to collapse
how do i find [email protected] where would that be?
Scruffy said:
3. Run IOTA by going to Start->Settings->Personal Tab->Phone->Services Tab->Internet->Get Settings->Start
Click to expand...
Click to collapse
I just upgraded to NFSFAN's latest ROM, everything went well but I can not get my internet to work. The one thing I did notice is under the services tab, internet is not an option. I loaded the dcd sprint carrier 20090714 cab am I missing something else?
Thank you for any help you can provide.
Update:
Well I went back and flashed to the HTC 6.1 rom, then back to the 6.5 rom. That fixed my internet issues, but that option is still missing for me. Then after all of that my MSID was really screwed up. Everything seems to be good now.
please please help me clear the instructions
i have a horribly vague idea of what i need to do, to get the internet working again.
i already got the IOTA_1120 zip file in my cell but when i even try to open it up it says that there is no application that is related to to it, so i must start this application and open up the file from within. How do i do this? am I even doing what im supposed to??
Where exactly is HKEY_LOCAL_MACHINE/Software/OEM/DIM and how do i get there???
if you could please instruct me with simple stieps i would greatly appreciate it, simple being like start>program files> etc.
please help i am one step away from smashing this damm cell into the wall
electricfeel_2012 said:
i have a horribly vague idea of what i need to do, to get the internet working again.
i already got the IOTA_1120 zip file in my cell but when i even try to open it up it says that there is no application that is related to to it, so i must start this application and open up the file from within. How do i do this? am I even doing what im supposed to??
Where exactly is HKEY_LOCAL_MACHINE/Software/OEM/DIM and how do i get there???
if you could please instruct me with simple stieps i would greatly appreciate it, simple being like start>program files> etc.
please help i am one step away from smashing this damm cell into the wall
Click to expand...
Click to collapse
The path of HKEY.... is actually on the registry. You need to use a registry editor (like PHM Regedit) to make the necessary changes to the registry. I would recommend you to re-read those instructions as they will not get any easier than that. Alternatively, if you are on Sprint's official rom and have absolutely no clue what you are doing, you can always call them and ask them for help.
As far as the IOTA zip file, if you cannot open it, that means that you do not have any program to extract from compressed files in your device. Your best bet is to transfer the file to the desktop and extract it there. Once you are done, place the extracted contents back in the device and run it in there.
OK I rooted my phone and flashed the newest AEM rom and for some reason I can't send or receive any picture messages it either says downloading or it gets stuck on sending. Can anyone help me out because I can't figure out how to fix it
Sent from my mistress
try downloading anycut from the market. once installed open it and select new shortcut...activity...find apns or apn and create a shortcut. once it says created go to your home screen and find it. it should say apns or apn. click it and you should see sprint with a circle next to it...click the circle so that it becomes selected. exit and try to send text. if it doesnt work reboot and try again.
Flashed PA 4.5 Beta 4 and 4.6 Beta 3 on my XT912.
After two days of working great, error message No APN on Device started showing up.
I looked at the APN settings and tried to create a new one with the correct settings, but when I hit save, the APN vanished.
I tried a number of times to create new APN's or modify existing ones to the values I've seen posted, but every time I try to save the APN it disappears from the list.
I hit reset to default and the phone started working for a bit, then No APN on Device again.
I've read a few posts scattered all over the place about APN problems like this, but haven't come across any solutions.
Any ideas on what I should try?
Hi,
Could someone kindly provide me with the current settings apk as i was a bit daft and forgot to back it up whilst trying to mess about with lock screens.
Cheers
Please delete thread - worked out how to do it
can you enlighten the rest where to find it?
Yes sure. I Extracted the update-kindle-juniper-35.4.6.1_user_461013820.bin file using 7-Zip and when it creates a folder you need to traverse to:
System > App and voila There are the main APK's so you can keep this as an apk backup area in case you mess up like i did
oh sorry i though this was about replacing the settings.apk witht he stock android one.
No it was putting the currently Amazon one back in - I tried a stock android one and had nothing but problems with it. Whether it is because there are 2 Amazon Settings apks
AmazonSettings.apk
AmazonSettingsPermissions.apk
Also the option to change lock screens does not show visually in the settings menu, but if you add a lock screen it will send you to the hidden settings option (Notification Access) to enable to the change which lock screen receives notifications.
Tried long and hard with this if you add a stock settings.apk lock screen option gets a bit corrupted and you cannot preview edit original one.
I really wanted to mess abit more with lock screen but looking at the apks for the Amazon rom:
LockScreen.apk
LockScreenPreviewer.apk
LockScreenSettings.apk
LockScreenSettingsPreviewer.apk
I didnt know if normal roms has 4 different ones??
Code 14: Could not open database. Some sort of permissions problem?
I have had CM 12.1 on a Nexus 5 for a while. Every time I upgraded to CM13 everything would work fine EXCEPT messaging would keep throwing "Sorry, messaging has stopped" message. So I Stayed on CM12.1. I just upgraded to a Nexus 5X and there is no CM12.1 for it so I tried Cm13 (Latest Nightly 6-18) and it seemed to work fine, just on WiFi and setting it up. I loaded what I always do, Android Firewall, checked all my permissions in Privacy Guard, used SU2.95 so I would have root. It still worked fine connected to my WiFi. I just got back from TMobile where I had to switch from MicroSIM to NanoSIM. put the sim in and the same messaging error shows up. So, working backwards, I unchecked ALL privacy guard, turned OFF the firewall, and rebooted. Still gives me the messaging error. So, I finally read the error message and its SQLite Error 14 on some database. Any ideas what I could try next? I suppose I can reload CM and set it all up again, and see where it starts to fail but that would be throwing away 4 hours from yesterday. I'm also not certain that the native App permissions aren't involved somehow. The phone IS encrypted but I have tried it both ways in the past.
I know there are all sorts of geniuses on here, and I am not smart enough.
Code:
java.lang.RuntimeException: An error occurred while executing doInBackground()
at android.os.AsyncTask$3.done(AsyncTask.java:309)
at java.util.concurrent.FutureTask.finishCompletion(FutureTask.java:354)
at java.util.concurrent.FutureTask.setException(FutureTask.java:223)
at java.util.concurrent.FutureTask.run(FutureTask.java:242)
at android.os.AsyncTask$SerialExecutor$1.run(AsyncTask.java:234)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1113)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:588)
at java.lang.Thread.run(Thread.java:818)
Caused by: android.database.sqlite.SQLiteException: unknown error (code 14): Could not open database
at android.database.DatabaseUtils.readExceptionFromParcel(DatabaseUtils.java:179)
at android.database.DatabaseUtils.readExceptionFromParcel(DatabaseUtils.java:135)
at android.content.ContentProviderProxy.query(ContentProviderNative.java:421)
at android.content.ContentResolver.query(ContentResolver.java:493)
at android.content.ContentResolver.query(ContentResolver.java:435)
at com.android.messaging.util.f.oH(SourceFile:53)
at com.android.messaging.util.f.doInBackground(SourceFile:34)
at android.os.AsyncTask$2.call(AsyncTask.java:295)
at java.util.concurrent.FutureTask.run(FutureTask.java:237)
... 4 more
EDIT : so i got into App permissions (new to MM?) and made sure the messaging service had storage and read and write on SMS. still looking deeper and searching the net...
EDIT : APN issue? reset to default TMobile settings and rebooted. still fails.
EDIT : could it be that I used the PICO version of OpenGAPPS? anyone had a problem with that? been searching still...
SOLVED : I'm such an idiot. I have been moving my blacklist.db database from version to version so I dont have to put all the numbers in again (wouldn't it be nice if there was a blacklist manager? I have all these spam numbers attached to a contact but you still have to choose them one by one) and of course between CM 12.1 and CM 13 they changed the database format or something so thats why it was crashing. Just one of the many steps I took getting my new phone set up.
If you pull SIM card out of the phone, does the crash still happen?