Develop Bugs

[Q] [Help] MD5 Mismatch Restore Problem

I tried installing Carbon on my GS3, but the gapps wouldn't work properly, and upon booting would say Setup Wizard stopped and the gapps processes. So now I can't get the Google apps on my phone. At this point I decided just to recover my backup that I did through CWM, but when I try to restore it it says MD5 mismatch...what do I do? I need help.

Slothshin said:
I tried installing Carbon on my GS3, but the gapps wouldn't work properly, and upon booting would say Setup Wizard stopped and the gapps processes. So now I can't get the Google apps on my phone. At this point I decided just to recover my backup that I did through CWM, but when I try to restore it it says MD5 mismatch...what do I do? I need help.
Click to expand...
Click to collapse
Toggle signature verification off in CWM

No luck, it was already toggled off. Dammit...how can I just go back to the way my phone was pre-rooting?

Slothshin said:
No luck, it was already toggled off. Dammit...how can I just go back to the way my phone was pre-rooting?
Click to expand...
Click to collapse
Just get on Carbon like this:
Flash mrRobinson's rooted stock
Download Goo Manager from the Play Store to install TWRP
Flash Carbon and the gapps from the Carbon thread

Just finished getting it, but it won't get past the final Samsung loading screen, where it glows purple. It's stuck there, in a boot loop...

Slothshin said:
Just finished getting it, but it won't get past the final Samsung loading screen, where it glows purple. It's stuck there, in a boot loop...
Click to expand...
Click to collapse
Go into 3e recovery and factory reset and wipe cache

It worked. Holy crap. Thank you, I thought this was going to take even longer. So...how can I put a new rom on it, if I wanted to?

SophisticatedRetard said:
Just get on Carbon like this:
Flash mrRobinson's rooted stock
Download Goo Manager from the Play Store to install TWRP
Flash Carbon and the gapps from the Carbon thread
Click to expand...
Click to collapse
^^^^^^^^^^^^^^^^^^

Where exactly is TWRP?

Slothshin said:
Where exactly is TWRP?
Click to expand...
Click to collapse
There are two recoveries. CWM and TWRP
I suggest TWRP not because I like it better but because it's easier to load. Download Goo Manager, open it, hit Menu => Install Openrecoveryscript

So I should use Goomanager again, even though it messed up my phone last time? I think it was the gapps download that messed it up last time. Maybe the latest version isn't compatible with my device?

Slothshin said:
So I should use Goomanager again, even though it messed up my phone last time? I think it was the gapps download that messed it up last time. Maybe the latest version isn't compatible with my device?
Click to expand...
Click to collapse
Only use Goo manager to load TWRP
Get the ROM and gapps from the carbon thread, and follow the OP's instructions for flashing

What thread would that be?

Slothshin said:
What thread would that be?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2136846

I have no idea what to do. The gapps link is for 4.2.2, even though the download page said the gapps should be 4.2.1.

Slothshin said:
I have no idea what to do. The gapps link is for 4.2.2, even though the download page said the gapps should be 4.2.1.
Click to expand...
Click to collapse
They are special gapps because of the Dark UI toggle... Give me a moment, I'm downloading carbon, and finding the proper gapps.
---------- Post added at 11:30 PM ---------- Previous post was at 11:24 PM ----------
Ok, it looks as though the Dark UI toggle has been removed, so use 4.2.2 gapps
Why not go with SlimBean? Carbon is just a Slim rip-off....
Flashing:
Wipe Data \ Factory Reset
Wipe Cache
Wipe Dalvik Cache
format /system
Flash ROM
Flash gapps
Reboot
Profit
---------- Post added at 11:57 PM ---------- Previous post was at 11:30 PM ----------
PMed you

[ROM][6.0][VIBE] VibeUI v3.5 1631 MULTILANGUAGE (Update 1631.2) by sixito007

Code:
I am not responsible for bricked devices, dead SD cards.
YOU are choosing to make these modificiations!!!!!
I am not Developer, i'm just post share from needrom by user sixito007
This is a port from K50-T5 (Lenovo K3 Note)
Installation:
Flash zip file on TWRP Recovery:
Wipe Data, Wipe Cache, Wipe Dalvik Cache, Wipe System.
Install ROM zip
Installing Complet and Reboot.
※Please make a backup of your device before installing or updating ROM
Changes:
DOLBY ATMOS™
SU
ROOT EXPLORER,
MIRAVISION™
SONY MUSIC PLAYER ™
Port Version Information
K50-T5_USR_DEV1631_7.165.1_1607250221_mp1V2.39_CN
Originally posted Here (Needrom)
Downloads
Update-OTA Installer.zip (OTA Updater Official application) https://drive.google.com/file/d/0B4DceN8HABzoSXNJcmQ1NEJYNGc/view?usp=sharing
ROM v2 https://drive.google.com/file/d/0B4DceN8HABzoSkcxVF9wZEF1cDg/view?usp=sharing
TWRP AIO ROW https://drive.google.com/file/d/0B4DceN8HABzod3FPcDNidU5iQjQ/view?usp=sharing
Update 1631.2 https://drive.google.com/file/d/0B_rwx9TBvDU9Wnk1YWs0ODBua2s/view?usp=sharing
Error is fixed

Tried. waited for 25 mts, still remains in boot loop.

cvpillai said:
Tried. waited for 25 mts, still remains in boot loop.
Click to expand...
Click to collapse
thats sad(
How you tried to install?

I am on TWRP, MM Stock ROM. followed usual ROM instalation procedures under TWRP and flahed. Waited 25mts on boot screen.:crying::crying:

cvpillai said:
I am on TWRP, MM Stock ROM. followed usual ROM instalation procedures under TWRP and flahed. Waited 25mts on boot screen.:crying::crying:
Click to expand...
Click to collapse
Added twrp. download from first post.

cvpillai said:
I am on TWRP, MM Stock ROM. followed usual ROM instalation procedures under TWRP and flahed. Waited 25mts on boot screen.:crying::crying:
Click to expand...
Click to collapse
LINK UPDATED, Error is Fixed.

Tried. Some improvement is there. It goes up to Welcome screen, waits for Language option, remains there after choosing the language - indefinitely.

Witch kernel is used in this ROM ? Thanks

Is there any way to remove those ugly grey icon backgrounds?
Like in the first post, in the second screenshot, it can be seen that Titanium backup has a grey background
Similarly, pre-included apps like syncit has no background.
This difference of icons makes the phone look quite ugly.

Please tell me what's working wrong, or not working at all...
Added update v3.5 1631.2.
-added more Lenovo apps
-added full slovak and czech language
-added Dolby Atmos™ on Settings
-added Update system on Settings/Device info
- more free RAM memory cca.1300MB

Installed successfully. So far only Bluetooth problem detected. Shall get back after some use.:good::good:

Firefox and other apps won't open. They crash as soon as tapped. And Bluetooth isn't working.

nvidiageek said:
Firefox and other apps won't open. They crash as soon as tapped. And Bluetooth isn't working.
Click to expand...
Click to collapse
you need to install rom first, then update 1631.2, and tap "format dalvik&cache" when install ends.
after that reboot - and system works fine. only bluetooth can crush at the first boot.

Dumaxa said:
you need to install rom first, then update 1631.2, and tap "format dalvik&cache" when install ends.
after that reboot - and system works fine. only bluetooth can crush at the first boot.
Click to expand...
Click to collapse
I'll try and report.
---------- Post added at 08:32 PM ---------- Previous post was at 07:33 PM ----------
Worked. Thanks.

Update on ota updater (update-v3.5-1631.3)

I cannot take any picture in camera is show need sd card... Even i cannot take picture of my screen. Please fix this :'(

Can i install this on K50-T5 (Lenovo K3 Note)?

inouext said:
Can i install this on K50-T5 (Lenovo K3 Note)?
Click to expand...
Click to collapse
I don't think you have read the OP carefully. It clearly says that the Rom is ported FROM the K3 note. Search the relevant thread in xda for your device. It'll be there. Good day.

[RECOVERY][3.1.1-0] TWRP for hi6250 Devices [METICULUS]

No more development from me.
XDA:DevDB Information
TWRP for the Hauwei P10 Lite, Tool/Utility for the Huawei P10 Lite
Contributors
Meticulus
Source Code: http://github.com/Meticulus
Version Information
Status: Testing
Created 2017-12-05
Last Updated 2018-01-18

Good work!!

You guys ready for custom ROMs?
This is my WAS-LX3 Running my Pure AOSP for HI6250 Devices! Installation is a bit tricky but I'll fix that up soon!

Great work!
Just tested it on my P10 lite(was-lx1c432), and it works.

Thanks for your work. I haven't tried it yet. I'm waiting for your custom Rom.
With Devcheck system info (search in playstore) I saw that my device is compatible.

Hi, I flashed it on my WAS-LX1C432 but it freezes at the screen where it asks about allowing modifications to the system partition. The build from the other thread works though, apart from decryption.

Cannot wait to get aosp good work!!

Ra2rd said:
Cannot wait to get aosp good work!!
Click to expand...
Click to collapse
Stock decryption not working here either
I have not found any easy way to get back to stock...

When i tried to flash the zip with the other TWRP build, i got error 7 : This build is for Washington, not for Warsaw.
So, i flashed the img with fastboot and it works.
Also after allowing modifications at first boot of TWRP, i don't get that msg anymore.
With the other build i had to allow it everytime i booted TWRP.
I have WAS-LX1AC432

waaagh313ph4n7 said:
Hi, I flashed it on my WAS-LX1C432 but it freezes at the screen where it asks about allowing modifications to the system partition. The build from the other thread works though, apart from decryption.
Click to expand...
Click to collapse
Touch unresponssive happened to also. I've just rebooted into recovery again. Solved.
This build works like a charm
Encryption of data will be always a problem on kirin devices ...

[email protected]@[email protected] said:
When i tried to flash the zip with the other TWRP build, i got error 7 : This build is for Washington, not for Warsaw.
So, i flashed the img with fastboot and it works.
Also after allowing modifications at first boot of TWRP, i don't get that msg anymore.
With the other build i had to allow it everytime i booted TWRP.
I have WAS-LX1AC432
Click to expand...
Click to collapse
Washington? Which device is Washington?... Other twrp is port from Washington?

WAS-TL10C01B220 cmcc/cn is work.
Tnx

Meticulus said:
Washington? Which device is Washington?... Other twrp is port from Washington?
Click to expand...
Click to collapse
I forgot to make a pic. That's what i remember. Maybe I saw or did something wrong.
Edit :
Found this with Google
https://www.frequencycheck.com/models/Az88E/huawei-p10-lite-dual-sim-lte-was-lx3-huawei-washington

[email protected]@[email protected] said:
I forgot to make a pic. That's what i remember. Maybe I saw or did something wrong.
Edit :
Found this with Google
https://www.frequencycheck.com/models/Az88E/huawei-p10-lite-dual-sim-lte-was-lx3-huawei-washington
Click to expand...
Click to collapse
Oh geez I didn't know about Washington. I thought all P10 Lite was Warsaw...:silly:

Meticulus said:
Oh geez I didn't know about Washington. I thought all P10 Lite was Warsaw...:silly:
Click to expand...
Click to collapse
Me too.
With your twrp build I tried to flash the recovery again. The zip file. And this time I didn't get any errors.
How's the progress on your rom?
I would be happy to test it.

[email protected]@[email protected] said:
Me too.
With your twrp build I tried to flash the recovery again. The zip file. And this time I didn't get any errors.
How's the progress on your rom?
I would be happy to test it.
Click to expand...
Click to collapse
The ROM is pretty good. I'm just concerned about ppl being able to go back to stock. Because the ROM is not a daily driver yet..,
Rear cam video capture not working.
Little laggies happen during ui animation.
Edit: If you are confident you can get back to stock if you need to pm me.

Any Other Testers?
If there is anyone else who is confident they can get back to stock via the 'dload' method and would like to test AOSP for the P10 Lite, pm me.

Worked for me. I needed to do a full wipe in TWRP first. ( i wiped data too, dunno if it was needed)
Flashed open gapps 7.1 pico.
There is no browser or file manager included in the rom.
So after setting up playstore, download a file manager if you need to access your ext sdcard.
Flashed supersu in twrp and have root too.
---------- Post added at 06:42 PM ---------- Previous post was at 06:15 PM ----------
Restored my apps and data with titanium Backup.
Working fine.
Maybe create a new topic for this ROM?

I made a TWRP backup. Selected everything except /cache.
With 3 button dload method i was able to go back to stock rom.
Unlocked bootloader again, flashed TWRP and then tried to restore the backup.
Got a 255 error. So i did a full wipe and formatted /data.
After this succesfully restored the backup and phone booted normally with everything intact.
So, internal storage is not encrypted in TWRP.
Rom is pretty smooth. Didn't encouter any issues. Except the known bugs.
Finger print is working, GPS too.
Didn't test NFC or dual sim.
Will use this rom and see how it goes.
edit :
Made a "tap and pay" payment in the supermarket. So NFC is working.

[email protected]@[email protected] said:
Worked for me. I needed to do a full wipe in TWRP first. ( i wiped data too, dunno if it was needed)
Flashed open gapps 7.1 pico.
There is no browser or file manager included in the rom.
So after setting up playstore, download a file manager if you need to access your ext sdcard.
Flashed supersu in twrp and have root too.
---------- Post added at 06:42 PM ---------- Previous post was at 06:15 PM ----------
Restored my apps and data with titanium Backup.
Working fine.
Maybe create a new topic for this ROM?
Click to expand...
Click to collapse
I'll create new topic for this 2morrow...:highfive:

I9500 boot loop after custom ROM install.

Hi all XDA community.
So I have run into a snag and I'm not getting any joy with what I have tried so far.
Procedure followed to this point:
1 wipe phone stock Samsung TW 5.0.1
2 CF Auto root install using Odin 3.12.x
3 reboot device
4 install TWRP 3.1.1.0 with Odin
5 reboot to recovery. Reboot device, all good.
6 reboot to recovery mount MTP, copy ROM to SD card.
7 install RR-N 5.8.5 20171215 Final.zip and NvmX RR-N v10.6. ROM and kernel.
8 wipe phone and reboot.
This is now where the problem comes in, the phone is stuck in a boot loop, sometimes getting further than other times, but never completing first start.
What I've tried a few times is to recopy the ROM to the SD card, re-install. Nope still the same. I tried another ROM. Same. Haven't tried another kernel though.
My next thought is to flash back to stock and try again, just that it's a big download and takes quite long.
Any other thoughts on where I've gone wrong and how I can fix it from you guys would be most appreciated.
TIA

345/5000
very weird you should start with the kernel that brings the rom to flash the nevermorex then I use RR N and is totally stable with gt i9500 the only thing is that when I connect to the pc I do not recognize the device at all if someone in this community helps me to solve that would be very helpful
have the test with the kernel that brings the rom to see
---------- Post added at 04:22 AM ---------- Previous post was at 04:15 AM ----------
NEW UPDATE IS HERE
As some of you might've noticed, the new update for RR s4 has rolled out few days ago but because the links in the first post at XDA thread haven't been updated yet, most of you forgot about it or even haven't realized!
And according to kongacute, it includes Bluetooth fix
Here is the link:
https://androidfilehost.com/?fid=746163614322263530

missioner said:
Hi all XDA community.
So I have run into a snag and I'm not getting any joy with what I have tried so far.
Procedure followed to this point:
...............
7 install RR-N 5.8.5 20171215 Final.zip and NvmX RR-N v10.6. ROM and kernel.
Click to expand...
Click to collapse
install cust rom + gapps, wipe cache dalvik, reboot.
if all good try install cust kernel.
if bootloop, extract boot.img in cust rom then flash via twrp.
try another cust kernel or version.
hope this help
Sent from my Lenovo A3500-HV using XDA-Developers Legacy app

Thanks I will try this tonight
Ertocell said:
install cust rom + gapps, wipe cache dalvik, reboot.
if all good try install cust kernel.
if bootloop, extract boot.img in cust rom then flash via twrp.
try another cust kernel or version.
hope this help
Sent from my Lenovo A3500-HV using XDA-Developers Legacy app
Click to expand...
Click to collapse

So sadly the recommended method has not yielded success.
The phone is still bootlooped.
So back to OEM ROM and try again.

Thanks again for all the help.
Flashed OEM ROM courtesy of sammobile.
Re-Rooted
Installed TWRP
Flashed RR clean install.
Success!!!!
Test for 24 hours
Flash Gapps pico.
Battery consumption issue now after Gapps install,
Any ideas?

missioner said:
Thanks again for all the help.
Flashed OEM ROM courtesy of sammobile.
Re-Rooted
Installed TWRP
Flashed RR clean install.
Success!!!!
Test for 24 hours
Flash Gapps pico.
Battery consumption issue now after Gapps install,
Any ideas?
Click to expand...
Click to collapse
Wait for a few days or a week. You can't judge it by only a day usage. The phone needs to optimize with the newly installed system.

After some more testing I think the charging socket is not very happy, I think it isnt helping the battery issue.
I will look into it when I have time this weekend. It may be time for a new connector though.

Oneplus 7T Oxygen OS 10.0.9HD65AA

Hello today i recive vía ota for my 7t HD1905 OS 10.0.9 with security patch 03.2020 and others. 235 MB i remember.
Regards

That's nice, I'm rooted so I have to wait for the full version, I'll report back...

hectorviov said:
That's nice, I'm rooted so I have to wait for the full version, I'll report back...
Click to expand...
Click to collapse
Full version is available on the Oxygen Updater app.

I am on Open Beta 2, updating to 10.0.9 will wipe data?

Ba7rani said:
I am on Open Beta 2, updating to 10.0.9 will wipe data?
Click to expand...
Click to collapse
Have to full wipe if coming from beta.

fossiltkm said:
Have to full wipe if coming from beta.
Click to expand...
Click to collapse
So I can use the updater app to update to the latest version coming from beta 2 but it will wipe data is what you're saying? If so if I'm also rooted will I lose root also?

yellowman82 said:
So I can use the updater app to update to the latest version coming from beta 2 but it will wipe data is what you're saying? If so if I'm also rooted will I lose root also?
Click to expand...
Click to collapse
The oxygen updater will download the full update, then you would update via local update. It will warn you that upon updating, that the device will perform a factory reset once updated. And yes, you will lose root.

fossiltkm said:
The oxygen updater will download the full update, then you would update via local update. It will warn you that upon updating, that the device will perform a factory reset once updated. And yes, you will lose root.
Click to expand...
Click to collapse
Ok thank you very much

So moving from Beta to Stable will wipe data, but not internal storage?

sjancura said:
So moving from Beta to Stable will wipe data, but not internal storage?
Click to expand...
Click to collapse
Like I said in the post above, you have to factory reset if leaving beta going back to stable. Factory Reset wipes the device.

I hope that fix the problem with lost signal.
---------- Post added at 11:27 PM ---------- Previous post was at 10:59 PM ----------
Still the signal lost problem

I have installed this on my 7T HD1905 and after a factory reset i am having issues to complete the android setup, in the built-in app update after clicking agree the android setup application crash and crash and i cant continue careful

bobby0724 said:
I have installed this on my 7T HD1905 and after a factory reset i am having issues to complete the android setup, in the built-in app update after clicking agree the android setup application crash and crash and i cant continue careful
Click to expand...
Click to collapse
I didnt made a factory reset so, the phone reboot and i continue with all my apps
---------- Post added at 01:01 AM ---------- Previous post was at 12:56 AM ----------
I want to know how to do to solve the lost signal in my
HD 1905. If someone know, does need to root and flash a custom rom? Or make something? I tried *#*#4636*#*# and i dont see the radios option too.

Hi. Can someone in 10.0.9 please look in the developer options, if the force dark option is present and can be activated (apply a dark theme to all apps)? This option had been removed from the first two open beta. To find out if it has been put back into official OTA

Any news on EU update?

Android-Desire said:
Any news on EU update?
Click to expand...
Click to collapse
I dont know but...check this
https://forum.xda-developers.com/oneplus-7t/how-to/ota-oxygenos-10-0-7-t4019505

I just updated from 10.0.8 rooted to 10.0.9 no problem.
Uninstalled my subs themes
Downloaded the full version through the updater since im rooted,
Installed, did NOT reboot
Magisk installed in the inactive slot
Rebooted
Profit.

infamousvincci said:
I just updated from 10.0.8 rooted to 10.0.9 no problem.
Uninstalled my subs themes
Downloaded the full version through the updater since im rooted,
Installed, did NOT reboot
Magisk installed in the inactive slot
Rebooted
Profit.
Click to expand...
Click to collapse
With magisk canary 20.4?

Ba7rani said:
I am on Open Beta 2, updating to 10.0.9 will wipe data?
Click to expand...
Click to collapse
sjancura said:
So moving from Beta to Stable will wipe data, but not internal storage?
Click to expand...
Click to collapse
It will wipe everything, including your photos and videos.

infamousvincci said:
I just updated from 10.0.8 rooted to 10.0.9 no problem.
Uninstalled my subs themes
Downloaded the full version through the updater since im rooted,
Installed, did NOT reboot
Magisk installed in the inactive slot
Rebooted
Profit.
Click to expand...
Click to collapse
Are you using the third party oxygen updater app? Did you use automatic or manual install method? Automatic option says it will reboot and manual says "afterward the phone will restart". I don't want it to automatically reboot.