I'll try to be very schematic/straightforward to make a quick point:
-3.35.401.12 fw
ICE HTC10 port running fine
S-OFF sushine
Unlocked bootloader
SuperCID 111111
fastboot oem rebootRUU bootloops, very quickly
I can boot hboot (white background), fastboot (black background) and recovery (which can't mount partitions or flash)
Downloaded firmware full wipe, can't run it because oem rebootRUU results in a bootloop
Downloaded 0PJAIMG.zip full RUU, placed in SD, but it doesn't flash it, 0% to all tasks and reboot.
Tried to change CID and MID, nothing. when I reboot they are the same as before
tried ruu.zip and as it tries to reboot download mode it boots system
download mode booted manually by me bootloops...
tried to flash manually some .img from firmware....no luck
flashes some, gives error 35 for others (like hosd)
I confirm that flashing img doesn't work, CID MID too....even if it says is done, it's not...as you reboot nothing worked
do you have any advice? I'm very experienced with these htc devices, owned all flagships since HD2, but this is more serious stuff
Thank you very much for your attention
throcker said:
I'll try to be very schematic/straightforward to make a quick point:
-3.35.401.12 fw
ICE HTC10 port running fine
S-OFF sushine
Unlocked bootloader
SuperCID 111111
fastboot oem rebootRUU bootloops, very quickly
I can boot hboot (white background), fastboot (black background) and recovery (which can't mount partitions or flash)
Downloaded firmware full wipe, can't run it because oem rebootRUU results in a bootloop
Downloaded 0PJAIMG.zip full RUU, placed in SD, but it doesn't flash it, 0% to all tasks and reboot.
Tried to change CID and MID, nothing. when I reboot they are the same as before
tried ruu.zip and as it tries to reboot download mode it boots system
download mode booted manually by me bootloops...
tried to flash manually some .img from firmware....no luck
flashes some, gives error 35 for others (like hosd)
I confirm that flashing img doesn't work, CID MID too....even if it says is done, it's not...as you reboot nothing worked
do you have any advice? I'm very experienced with these htc devices, owned all flagships since HD2, but this is more serious stuff
Thank you very much for your attention
Click to expand...
Click to collapse
hi,
did you check that is there any flash lock option (recovery lock e.t.c) in your download mode?
turksailorman said:
hi,
did you check that is there any flash lock option (recovery lock e.t.c) in your download mode?
Click to expand...
Click to collapse
I didn't see anything, anyway I'm s-off so I shouldn't have any kind of lock
throcker said:
I didn't see anything, anyway I'm s-off so I shouldn't have any kind of lock
Click to expand...
Click to collapse
Is there any rw (read-write) permission for their partition?
turksailorman said:
Is there any rw (read-write) permission for their partition?
Click to expand...
Click to collapse
not that I know...how do I check?
throcker said:
not that I know...how do I check?
Click to expand...
Click to collapse
hi,
shell
cat /proc/emmc
or
ls -al
will show your folder permission but you must have root right!
turksailorman said:
hi,
shell
cat /proc/emmc
or
ls -al
will show your folder permission but you must have root right!
Click to expand...
Click to collapse
thank you very much, I will try as I can
can I do it on fastboot or I need adb?
throcker said:
thank you very much, I will try as I can
can I do it on fastboot or I need adb?
Click to expand...
Click to collapse
hi,
i only use it in win10 when phone is in operating system. root access must done. but in win7 you can use it in adb mode i thing.
turksailorman said:
hi,
i only use it in win10 when phone is in operating system. root access must done. but in win7 you can use it in adb mode i thing.
Click to expand...
Click to collapse
I can't access the system. internal memory wiped itself....
I can enter only fastboot, download mode and twrp....
throcker said:
I can't access the system. internal memory wiped itself....
I can enter only fastboot, download mode and twrp....
Click to expand...
Click to collapse
whats the `fastboot getvar all` command show on screen when in download mode?
I gave my phone to a technician (though I knew the problem, wanted to have a second opinion)
and just like me, he said that phone needs a factory reflash of internal memory. it's corrupted, something doesn't work.
any idea?
Related
Hello all, today morning i transfer my music from PC to my phone and when it was 90% transfer stuck and phone was stuck too. So i tryed to reboot it. After i do it it stuck at HTC Quietly brilliant logo. I press power + volume down and tryed go to recovery and erase cache but when i press Recovery it show TWRP screen and stuck on it too. When i in fastboot and press HBOOT it show SD Card failed or something like that. So i think my SD card not mount when i turn on my phone, how to fix this guys ?? everything was fine until today. If you know anyway to get my SD Card mounted please tell i really need to fix this problem
Gezas said:
Hello all, today morning i transfer my music from PC to my phone and when it was 90% transfer stuck and phone was stuck too. So i tryed to reboot it. After i do it it stuck at HTC Quietly brilliant logo. I press power + volume down and tryed go to recovery and erase cache but when i press Recovery it show TWRP screen and stuck on it too. When i in fastboot and press HBOOT it show SD Card failed or something like that. So i think my SD card not mount when i turn on my phone, how to fix this guys ?? everything was fine until today. If you know anyway to get my SD Card mounted please tell i really need to fix this problem
Click to expand...
Click to collapse
That's strange man, how did you transfer it?
Try to use ADB to flash another recovery while in fastboot I believe its "adb flash recovery /folder/folder/recoveryfilename.zip" see if that works. If adb gives you a permission error type into BASH terminal (Ubuntu/Debian) or command prompt (win) "adb root". If that recovery works there should be an option somewhere to Mount the SD card. Make sure the recovery you flash is built for your device.
Nexus 4 CyanogenMod 10.1.0RC5
ryaniskira said:
Try to use ADB to flash another recovery while in fastboot I believe its "adb flash recovery /folder/folder/recoveryfilename.zip" see if that works. If adb gives you a permission error type into BASH terminal (Ubuntu/Debian) or command prompt (win) "adb root". If that recovery works there should be an option somewhere to Mount the SD card. Make sure the recovery you flash is built for your device.
Nexus 4 CyanogenMod 10.1.0RC5
Click to expand...
Click to collapse
it is
Code:
fastboot flash recovery recovery.img
but i don't think that this will solve his problem, i think that something messed up his partitions, probably he will need to run a RUU and see if that works
matt95 said:
it is
Code:
fastboot flash recovery recovery.img
but i don't think that this will solve his problem, i think that something messed up his partitions, probably he will need to run a RUU and see if that works
Click to expand...
Click to collapse
Hey maybe you could help me with that ?? If can write me message or add in skype simassimas99
Gezas said:
Hey maybe you could help me with that ?? If can write me message or add in skype simassimas99
Click to expand...
Click to collapse
by the way i have backups but i cant enter recovery. My phone CID is HTC__032 which RUU i need use ?? and if i cant acces my SD Card when phone connected to PC i still can install that RUU ??
Gezas said:
Hey maybe you could help me with that ?? If can write me message or add in skype simassimas99
Click to expand...
Click to collapse
Post the result of: fastboot getvar version-main
We Will then see whether your device has a ruu for it or not...
If you need help in flashing recovery.. Use the command posted by matt.. Don't forget to erase fastboot cache as well!
-Sent from my IceCold One X!
vin4yak said:
Post the result of: fastboot getvar version-main
We Will then see whether your device has a ruu for it or not...
If you need help in flashing recovery.. Use the command posted by matt.. Don't forget to erase fastboot cache as well!
-Sent from my IceCold One X!
Click to expand...
Click to collapse
My getvar version-main is 3.14.401.31
CID HTC__032
When i connect it by USB it show FASTBOOT USB when i use Hasoon tool and trying erase cache it says error: device not found. I close window next window pop up and says "erasing "cache" and in next line failed....
Gezas said:
My getvar version-main is 3.14.401.31
CID HTC__032
When i connect it by USB it show FASTBOOT USB when i use Hasoon tool and trying erase cache it says error: device not found. I close window next window pop up and says "erasing "cache" and in next line failed....
Click to expand...
Click to collapse
Here's the ruu for your device : http://bugsylawson.com/files/file/1...-r-radio-5120416229-release-302015-signedexe/
Download it. Lock your Bootloader : fastboot oem lock
Then run the ruu with admin privileges. It will take your phone back to full stock!
If your problem doesn't solve even now, it might be a hardware failure of some sort...
-Sent from my IceCold One X!
vin4yak said:
Here's the ruu for your device : http://bugsylawson.com/files/file/1...-r-radio-5120416229-release-302015-signedexe/
Download it. Lock your Bootloader : fastboot oem lock
Then run the ruu with admin privileges. It will take your phone back to full stock!
If your problem doesn't solve even now, it might be a hardware failure of some sort...
-Sent from my IceCold One X!
Click to expand...
Click to collapse
Ok will try. So if my Storage wont show at Computer it doesnt matter i just need go to bootloader use fastboot for lock and install RUU ?
Sorry for all these questions just need be fully sure
Btw i dont need flash boot.img or stock recovery ?? just install RUU ?
Gezas said:
Ok will try. So if my Storage wont show at Computer it doesnt matter i just need go to bootloader use fastboot for lock and install RUU ?
Sorry for all these questions just need be fully sure
Btw i dont need flash boot.img or stock recovery ?? just install RUU ?
Click to expand...
Click to collapse
Ok now my phone show ***Locked*** i tryed install RUU but i got problem like this
http://forum.xda-developers.com/showthread.php?t=2187491&page=2
It waiting for bootloader. When it restart bootloader it not restarting just stay off.
Gezas said:
Ok now my phone show ***Locked*** i tryed install RUU but i got problem like this
http://forum.xda-developers.com/showthread.php?t=2187491&page=2
It waiting for bootloader. When it restart bootloader it not restarting just stay off.
Click to expand...
Click to collapse
PLEASE any 1 help me. Im stuck in bootloader now when i turn on my phone it send me to bootloader. When i connect it to PC i dont see it. Maybe some one can help me via team wiever ?? And tell me maybe im bricked already ?? Or im not bricked till i can go to bootloader ?
Nobody have same problem and maybe know solution ?
Gezas said:
Nobody have same problem and maybe know solution ?
Click to expand...
Click to collapse
well if u are on a rooted device when ur device goes to bootloader...go to recovery and wipe davilik cache and fix permissions...if it isnt rooted...when ur device goes to bootloader try FACTORY RESET ...
recovery not work, factory reset too.
Gezas said:
recovery not work, factory reset too.
Click to expand...
Click to collapse
first flash the recovery in ur mobile if its bootloader is unlocked
Then you can do it with a nandroid backup !
http://forum.xda-developers.com/show....php?t=1975140
Go there and download the matching nandroid of your cid and main !
You need to flash the boot.img from the nandroid and unpack the nandroid to the phones sdcard then perform a full wipe and restore the nandroid.
It might need a JTAG.
Nexus 4 CyanogenMod 10.1.0RC5
ryaniskira said:
It might need a JTAG.
Nexus 4 CyanogenMod 10.1.0RC5
Click to expand...
Click to collapse
i am also thinking the same
I was S-Off and rooted with Roadrunner. I went ahead and accepted 4.4 OTA fully expecting to lose S-Off and Root.
What I got was a phone that can't recognize the SD card, and won't boot past the white HTC screen (does it twice then shuts down to red triangle and exclamation point. I've tried to get to the main white admin. screen (vol. up and power) but no luck. I have go to a blue screen offering:
a reboot system - doesn't work
apply from SD card - phone can't find it
apply from phone storage - can find no files
apoply from cache - can't find any files
wipe data factory reset - did that and still nothing
wipe cache partition - didn't know what this would end up doing so I haven't tried it.
At the bottom of the screen in green it states :
Mount SDCARD Failed 1 time through 5 times.
Cannon mount SD Card (no such file or directory)
Write host_mode: 0 Done
I only wanted to get to 4.4, S-Off, unlocked, and rooted to get rid of bloatware. I've rooted before but i'm pretty much a noob (I've been reading here for 2+ years) but am lost understanding programmer language.
Can anyone help me? I'm lost as this is my only phone (I don't have a land line)
Thank you
Look at the following thread, may be this can help
http://forum.xda-developers.com/showthread.php?t=2662787
Dugoutdog said:
I was S-Off and rooted with Roadrunner. I went ahead and accepted 4.4 OTA fully expecting to lose S-Off and Root.
What I got was a phone that can't recognize the SD card, and won't boot past the white HTC screen (does it twice then shuts down to red triangle and exclamation point. I've tried to get to the main white admin. screen (vol. up and power) but no luck. I have go to a blue screen offering:
a reboot system - doesn't work
apply from SD card - phone can't find it
apply from phone storage - can find no files
apoply from cache - can't find any files
wipe data factory reset - did that and still nothing
wipe cache partition - didn't know what this would end up doing so I haven't tried it.
At the bottom of the screen in green it states :
Mount SDCARD Failed 1 time through 5 times.
Cannon mount SD Card (no such file or directory)
Write host_mode: 0 Done
I only wanted to get to 4.4, S-Off, unlocked, and rooted to get rid of bloatware. I've rooted before but i'm pretty much a noob (I've been reading here for 2+ years) but am lost understanding programmer language.
Can anyone help me? I'm lost as this is my only phone (I don't have a land line)
Thank you
Click to expand...
Click to collapse
Dugoutdog said:
I was S-Off and rooted with Roadrunner. I went ahead and accepted 4.4 OTA fully expecting to lose S-Off and Root.
What I got was a phone that can't recognize the SD card, and won't boot past the white HTC screen (does it twice then shuts down to red triangle and exclamation point. I've tried to get to the main white admin. screen (vol. up and power) but no luck. I have go to a blue screen offering:
a reboot system - doesn't work
apply from SD card - phone can't find it
apply from phone storage - can find no files
apoply from cache - can't find any files
wipe data factory reset - did that and still nothing
wipe cache partition - didn't know what this would end up doing so I haven't tried it.
At the bottom of the screen in green it states :
Mount SDCARD Failed 1 time through 5 times.
Cannon mount SD Card (no such file or directory)
Write host_mode: 0 Done
I only wanted to get to 4.4, S-Off, unlocked, and rooted to get rid of bloatware. I've rooted before but i'm pretty much a noob (I've been reading here for 2+ years) but am lost understanding programmer language.
Can anyone help me? I'm lost as this is my only phone (I don't have a land line)
Thank you
Click to expand...
Click to collapse
Did you try and update while having a custom recovery and/or Rom installed? Also bootloader is power+volume down. The ota won't effect s off or locked status. Just get to fastboot and boot to RUU mode and run stock RUU. Then take updates to 4.4.2
Just a little more info Gizmoe please
Gizmoe said:
Did you try and update while having a custom recovery and/or Rom installed? Also bootloader is power+volume down. The ota won't effect s off or locked status. Just get to fastboot and boot to RUU mode and run stock RUU. Then take updates to 4.4.2
Click to expand...
Click to collapse
I wrote of my problem in middle of night and blanked on getting to bootloader. I am there now. Fastboot takes me to Fastboot USB. RUU mode isn't an option under fastboot just bootloader, reboot, reboot bootloader, and power down. My PC is not recognizing the phone. I was running stock ROM. I don't recall doing anything special as far as recovery since that would be beyond my learning curve.
Dugoutdog said:
I wrote of my problem in middle of night and blanked on getting to bootloader. I am there now. Fastboot takes me to Fastboot USB. RUU mode isn't an option under fastboot just bootloader, reboot, reboot bootloader, and power down. My PC is not recognizing the phone. I was running stock ROM. I don't recall doing anything special as far as recovery since that would be beyond my learning curve.
Click to expand...
Click to collapse
Can you send fastboot commands like
Code:
Fastboot devices
And see your device listed?
PS: to above
Also just noticed my phone is now saying UNLOCKED which it wasn't before. Just S-Off through roadrunner (and still S-Off). . My contract was up on Friday and called Verizon to get unlock info but they said they didn't supply that info. I needed to go to a third party (figures).
Dugoutdog said:
Also just noticed my phone is now saying UNLOCKED which it wasn't before. Just S-Off through roadrunner (and still S-Off). . My contract was up on Friday and called Verizon to get unlock info but they said they didn't supply that info. I needed to go to a third party (figures).
Click to expand...
Click to collapse
Did you read my other post. Can you confirm if you have fastboot connectivity? RUU mode is a command not a list option.
gizmoe
I can get to the FASTBOOT USB command with bootloader, reboot, reboot bootloader, and power down. My PC made a nolise as if it recognized and connected to the phone but it is not listed.
Dugoutdog said:
I can get to the FASTBOOT USB command with bootloader, reboot, reboot bootloader, and power down. My PC made a nolise as if it recognized and connected to the phone but it is not listed.
Click to expand...
Click to collapse
You have connectivity then. It's not going to list it in " my computer" unless its booted into Rom. Just use this thread
http://forum.xda-developers.com/showthread.php?p=46286588
To flash RUU. Don't do relock or s on just flash the stock RUU.
This is where I'm lost again
If I can't see it in my computer then where do I type the codes? I'm very appreciative of your help but I'm in uncharted waters here.
Dugoutdog said:
If I can't see it in my computer then where do I type the codes? I'm very appreciative of your help but I'm in uncharted waters here.
Click to expand...
Click to collapse
Use cmd prompt. Did you setup adb/fastboot when you used rumrunners? In command prompt with phone plugged in while on boot loader screen type fastboot devices. If you see a serial number returned you are connected. Typing fastboot oem rebootRUU will put the phone into RUU mode where you can flash the decrypted RUU.
my sub-directory
Gizmoe said:
Use cmd prompt. Did you setup adb/fastboot when you used rumrunners? In command prompt with phone plugged in while on boot loader screen type fastboot devices. If you see a serial number returned you are connected. Typing fastboot oem rebootRUU will put the phone into RUU mode where you can flash the decrypted RUU.
Click to expand...
Click to collapse
So far so good. It returned FA37GS912166 fastboot.
Typing as directed it returned
<bootloader> Start Verify: 0
OKAY [0.050s]
finished. total time 0.050s
I have a black screen on my device with a white htc showing. Now I just don't know where to get the stock RUU. I went to nosroms.com but page is gone. Went to htc1guru.com and found this one there.
RUU Zip M7 WL JB 50 VZW 1.10.605.10 Decrypted
File Size: 1.1 GiB - Downloads: 1170
MD5: 2704d492d580887e2741c8a6b7fd620e
Comments: modelid: PN0731000
cidnum: VZW__001
It's downloading but REAL slow. Might be done by the time I hear back from you regarding folder.
Dugoutdog said:
So far so good. It returned FA37GS912166 fastboot.
Typing as directed it returned
<bootloader> Start Verify: 0
OKAY [0.050s]
finished. total time 0.050s
I have a black screen on my device with a white htc showing. Now I just don't know where to get the stock RUU. I went to nosroms.com but page is gone. Went to htc1guru.com and found this one there.
RUU Zip M7 WL JB 50 VZW 1.10.605.10 Decrypted
File Size: 1.1 GiB - Downloads: 1170
MD5: 2704d492d580887e2741c8a6b7fd620e
Comments: modelid: PN0731000
cidnum: VZW__001
It's downloading but REAL slow. Might be done by the time I hear back from you regarding folder.
Click to expand...
Click to collapse
In santods thread at bottom of post #2 look for the decrypted ones. You can download whichever one. I would use the most current and then let it update to kit Kat from software update on phone.
http://forum.xda-developers.com/showthread.php?p=46506621
now waiting
Gizmoe said:
In santods thread at bottom of post #2 look for the decrypted ones. You can download whichever one. I would use the most current and then let it update to kit Kat from software update on phone.
http://forum.xda-developers.com/showthread.php?p=46506621
Click to expand...
Click to collapse
Waiting for download to finish and getting ready for work. It will be close to see if I get it done before I have to leave. If not will finish at 3:00am when I get home and get back to you either way.
almost home
Gizmoe said:
In santods thread at bottom of post #2 look for the decrypted ones. You can download whichever one. I would use the most current and then let it update to kit Kat from software update on phone.
http://forum.xda-developers.com/showthread.php?p=46506621
Click to expand...
Click to collapse
Ok. Have santods file "RUU Zip M7_WL_JB_50_VZW_1.10.605.10_decrypted". I can't remember....do I leave it zipped? If unzipped what file do I use??? recovery_signed.img? If left zipped where must the directory be located? if unzipped where do the files have to be?
I won't forget a big thanks when this is done but thanks for getting me this far. Awaiting your reply.
Dugoutdog said:
Ok. Have santods file "RUU Zip M7_WL_JB_50_VZW_1.10.605.10_decrypted". I can't remember....do I leave it zipped? If unzipped what file do I use??? recovery_signed.img? If left zipped where must the directory be located? if unzipped where do the files have to be?
I won't forget a big thanks when this is done but thanks for getting me this far. Awaiting your reply.
Click to expand...
Click to collapse
Just leave it zipped. Rename to RUU. Then put it in same directory you are in while using cmd prompt. Then type fastboot oem rebootRUU. Once phone is on black screen with silver letters type fastboot flash zip RUU.zip it will do some stuff and then fail saying to flush the image. Just repeat the fastboot flash zip RUU.zip again and it will succeed. You then will be complete stock. Then you should have no problems updating to kitkat either.
Command Error
Gizmoe said:
Just leave it zipped. Rename to RUU. Then put it in same directory you are in while using cmd prompt. Then type fastboot oem rebootRUU. Once phone is on black screen with silver letters type fastboot flash zip RUU.zip it will do some stuff and then fail saying to flush the image. Just repeat the fastboot flash zip RUU.zip again and it will succeed. You then will be complete stock. Then you should have no problems updating to kitkat either.
Click to expand...
Click to collapse
I'm getting a {ERR} command error.
entered " fastboot oem rebootRUU.zip" also tried fastboot oem rebootRUU", "fastboot oem reboot RUU", and "fastboot oem reboot RUU.zip" in case you forgot the space between reboot and RUU.
It is in the directory where the fastboot.exe is located. It is a zipped folder called RUU.zip.
I called in SL for tonight as I really want to get this done tonight. Too much at stake.
Dugoutdog said:
I'm getting a {ERR} command error.
entered " fastboot oem rebootRUU.zip" also tried fastboot oem rebootRUU", "fastboot oem reboot RUU", and "fastboot oem reboot RUU.zip" in case you forgot the space between reboot and RUU.
It is in the directory where the fastboot.exe is located. It is a zipped folder called RUU.zip.
I called in SL for tonight as I really want to get this done tonight. Too much at stake.
Click to expand...
Click to collapse
First type fastboot devices and make sure its connected. Phone needs to be in fast boot mode. Screen should read fastboot usb in red letters. Then type exactly
Fastboot oem rebootRUU
Then
Fastboot flash zip RUU.zip
RUU.zip needs to be in the same directory cmd is reading.
Something is happening . . . . . "sending zip"
resent as failed like you said.
failed as you stated . . . resent. It also said failed resend immediately. something is gyrating.
OK. at bottom of command prompt it says "Successful OKAY 249.248s" Finished total time 312.192 sec.
My phone has HTC in white small letters and a solid green bar below it.
Before I screw anything from this point, what do I do now? Just press the power button?
Hey there
I want to start off by saying I have very little experience with rooting, but am very familiar with jailbreaking apple devices so I figured i could manage.
I have a htc one m8 on rogers network locked. I rooted it and had super user and all that jazz, then flashed AOKP. Then I thought i actually liked the stock HTC sense better, so I tried to "get things back to normal"...lol.
Now im at the point where if i turn my phone on it goes straight to the fastboot screen(?) with all the "fast boot, recovery, factory reset, etc". Since I'm super new to all of this is there anybody that can write some instructions on how to get my phone back to stock? I would really appreciate it after panicking over this for 3 days.
Edit: In the fastboot screen at the top it says ***Tampered*** ***Relocked*** ***security warning**
also when i try to press recovery it shows the htc screen for 1 second then back to the same menu
i found this http://forum.xda-developers.com/showthread.php?t=2710735 but i cannot even get into recovery
haydenrbm said:
Hey there
I want to start off by saying I have very little experience with rooting, but am very familiar with jailbreaking apple devices so I figured i could manage.
I have a htc one m8 on rogers network locked. I rooted it and had super user and all that jazz, then flashed AOKP. Then I thought i actually liked the stock HTC sense better, so I tried to "get things back to normal"...lol.
Now im at the point where if i turn my phone on it goes straight to the fastboot screen(?) with all the "fast boot, recovery, factory reset, etc". Since I'm super new to all of this is there anybody that can write some instructions on how to get my phone back to stock? I would really appreciate it after panicking over this for 3 days.
Click to expand...
Click to collapse
While being an expert with rooting and flashing custom recoveries on Samsung devices, I am also new to the world of HTC. Out of curiosity, what happens when you hit factory reset?
Unlock the boot loader again then install twrp recovery then head over to the stock backup thread and flash one of the nandroids for your cid.
MattMJB0188 said:
While being an expert with rooting and flashing custom recoveries on Samsung devices, I am also new to the world of HTC. Out of curiosity, what happens when you hit factory reset?
Click to expand...
Click to collapse
When i hit factory reset it the screen changes to the HTC in green for 1 second then back to where i started
ashyx said:
Unlock the boot loader again then install twrp recovery then head over to the stock backup thread and flash one of the nandroids for your cid.
Click to expand...
Click to collapse
I would...but when im trying to use ADB devices it isn't found
haydenrbm said:
When i hit factory reset it the screen changes to the HTC in green for 1 second then back to where i started
I would...but when im trying to use ADB devices it isn't found
Click to expand...
Click to collapse
Do fastboot devices ... adb commands itself won't work in bootloader, it has to be fastboot commands.
now you have a locked bootloader which means you cant do anything.. so your first step is to unlock it again then flash a custom recovery (TWRP) after that flash the stock rom+ boot.img ( to be safe) make sure it boots. RELOCK the bootloader then flash your firmware.zip.. hope it helps
mushages said:
now you have a locked bootloader which means you cant do anything.. so your first step is to unlock it again then flash a custom recovery (TWRP) after that flash the stock rom+ boot.img ( to be safe) make sure it boots. RELOCK the bootloader then flash your firmware.zip.. hope it helps
Click to expand...
Click to collapse
How can I unlock the bootloader again without the device showing in adb?
haydenrbm said:
How can I unlock the bootloader again without the device showing in adb?
Click to expand...
Click to collapse
i think you have your unlock token. start from here
http://www.htcdev.com/bootloader/unlock-instructions/page-4/
haydenrbm said:
How can I unlock the bootloader again without the device showing in adb?
Click to expand...
Click to collapse
If it's in bootloader it should show in command prompt when you type fastboot devices after connecting it to PC. If it doesn't then there is a driver problem perhaps. Check to make sure you have HTC drivers installed, or reinstall them. Might as well make sure adb is up to date as well, can do that through the Android SDK Manager. Another possibility might be that the usb cable isn't working correctly, try another cable. Fact of the matter though is, if it's in bootloader and you connect it to the PC adb/fastboot SHOULD pick it up.
So check and fix those things. Also make sure you use the correct commands, in bootloader mode, it'll be fastboot commands, not "adb devices" but "fastboot devices" ... "fastboot reboot" etc etc. Also make sure you're running the commands from within the adb/fastboot folder path(just for in case yeah...)
mushages said:
i think you have your unlock token. start from here
Click to expand...
Click to collapse
Okay it is unlocked, but now it just stays on the AOKP boot screen
Thank you for the help btw, it must be very painful.
haydenrbm said:
Okay it is unlocked, but now it just stays on the AOKP boot screen
Thank you for the help btw, it must be very painful.
Click to expand...
Click to collapse
Press Volume UP + Power button, once the screen goes dead, press Volume DOWN + Power button to get back into bootloader. Then flash a custom recovery (Like TWRP) and start flashing the Stock nandroid backups, can be found from here Collection of Stock backups
BerndM14 said:
Press Volume UP + Power button, once the screen goes dead, press Volume DOWN + Power button to get back into bootloader. Then flash a custom recovery (Like TWRP) and start flashing the Stock nandroid backups, can be found from here Collection of Stock backups
Click to expand...
Click to collapse
Okay i have got into the bootloader now, thanks.
I cannot put the rom into the internal storage because my computer wont detect the phone
haydenrbm said:
Okay i have got into the bootloader now, thanks.
the adb devices will show it if i have it in recovery mode but not bootloader, why is that ?
Click to expand...
Click to collapse
You didn't read any of my posts about that, did you? lol
I already stated adb commands like "adb devices" "adb reboot" etc will NOT work in bootloader, it'll work in the system and yes, it'll work in recovery for sideloading etc, but NOT in bootloader. For bootloader you HAVE to use fastboot commands, "fastboot devices" "fastboot reboot" "fastboot oem lock" "fastboot oem get_identifier_token" "fastboot flash unlocktoken Unlock_code.bin" etc etc
BerndM14 said:
You didn't read any of my posts about that, did you? lol
I already stated adb commands like "adb devices" "adb reboot" etc will NOT work in bootloader, it'll work in the system and yes, it'll work in recovery for sideloading etc, but NOT in bootloader. For bootloader you HAVE to use fastboot commands, "fastboot devices" "fastboot reboot" "fastboot oem lock" "fastboot oem get_identifier_token" "fastboot flash unlocktoken Unlock_code.bin" etc etc
Click to expand...
Click to collapse
Sorry I skipped past your first response, that makes sense now.
So I need to put the rom on my internal storage then go into recovery and install the zip using TWRP..but when I plug my phone into the computer the internal storage wont show up.
I do have sync manager installed also, and it wont show up in that either
haydenrbm said:
Okay i have got into the bootloader now, thanks.
I cannot put the rom into the internal storage because my computer wont detect the phone
Click to expand...
Click to collapse
With that adb devices command again in bootloader? Did you flash TWRP yet? If so, Got to Advanced >>> ADB Sideload >>> Swipe to start sideload.
Place the ROM.zip file in your adb folder then:
Connect phone to PC, while still in recovery mode type adb devices to make sure your device gets picked up, should show you the serial number for device AS WELL as "sideload" next to it, if so then you are hooked up right. Next type adb sideload name_of_zip.zip wait until fully finished.
If sideload fails for one or other reason you can also try to push it. Reboot to recovery again, type adb devices to make sure device gets picked up, type adb push name_of_zip.zip /data/media/0/ or adb push name_of_zip.zip /sdcard/ flash as per usual then.
Yet somehow I don't think you even need to go to these steps
BerndM14 said:
With that adb devices command again in bootloader? Did you flash TWRP yet? If so, Got to Advanced >>> ADB Sideload >>> Swipe to start sideload.
Place the ROM.zip file in your adb folder then:
Connect phone to PC, while still in recovery mode type adb devices to make sure your device gets picked up, should show you the serial number for device AS WELL as "sideload" next to it, if so then you are hooked up right. Next type adb sideload name_of_zip.zip wait until fully finished, once done reboot back into recovery and flash rom.
If sideload fails for one or other reason you can also try to push it. Reboot to recovery again, type adb devices to make sure device gets picked up, type adb push name_of_zip.zip /data/media/0/ or adb push name_of_zip.zip /sdcard/ flash as per usual then.
Yet somehow I don't think you even need to go to these steps
Click to expand...
Click to collapse
haha..thank you for baby steps
The sideload completed and i rebooted then went back into recovery and install but there isn't a zip file anywhere
Edit: wow..some how i reset it and it turned on and got into the phone... and now it connects to the computer so i should be able to follow the other tutorial now...man you are a life saver thank you so much
haydenrbm said:
haha..thank you for baby steps
The sideload completed and i rebooted then went back into recovery and install but there isn't a zip file anywhere
Edit: wow..some how i reset it and it turned on and got into the phone... and now it connects to the computer so i should be able to follow the other tutorial now...man you are a life saver thank you so much
Click to expand...
Click to collapse
I made a small mistake with the sideload though, it actually installs automatically as such you don't have to go back into recovery to flash, as it did it already, sorry. Edited post to fix.
Well as long as you can get into phone now to copy the nandroid backup to the phone all should be in order, can flash back stock from the nandroid then.
Glad it worked out then.:good:
BerndM14 said:
I made a small mistake with the sideload though, it actually installs automatically as such you don't have to go back into recovery to flash, as it did it already, sorry. Edited post to fix.
Well as long as you can get into phone now to copy the nandroid backup to the phone all should be in order, can flash back stock from the nandroid then.
Glad it worked out then.:good:
Click to expand...
Click to collapse
Hello BerndM14, thank you for this baby steps. Mine m8 is a gpe version, it's 4.4.2 google rom, rooted, cwm recovery, s-on. I was trying to flash the full google 4.4.3 zip rom under recovery, however, after that, my m8 automaticlly enter recovery everytime reboot. And I can manually enter the bootloader, my pc can find the m8 both in recovery and bootloader. I searched this post, and do it accordingly, I download the gpe stock backup KOT49H.H16 - 1.16.1700.16 - CWM Philz touch and use adb sideload gpe3.zip to the cell phone sucessfully, then the recovery automaticlly starts installing rom, then, I got below message:
-- Erasing & formatting /system as ext4 (Unmounted system)
system partition formatted!
-- Mounting system partition for writing
Writing rom system to system partition
Rom system written successfully!
@symlinking and permissions
--Creating toolbox symlinks
--creating additional symlinks
Symlinks Set!
--installing busybox
Set_perm: some changes failed
E:Error in /tmp/update.zip
(status 7)
installation aborted.
Install from sideload complete.
then, I reboot it manually. problem still there, still enter the recovery automaticlly.
do you have any comments on this? please.
thanks,
Hi there,
Yesterday phone just turned off and since then there is no way to turn it on. I've managed to download RUU File and ive tried to run it form sd there is a problem :
ibb.co/cnu2DH
ibb.co/cqbcfx
Is there any way to turn s-off from bootload mode? Because there is no way to turn this on so i can turn off it from programmer options
ibb.co/nG3ZSc
I cant post links as a new user so please copy it yourself.
You need to flash recovery from download not bootloader and you need an unlocked bootloader.
Also you can't flash ruu from recovery, you need to put the file named as 0PJAIMG.zip in the root of your fat32 formatted sdcard and boot in download.
If you need more help you need to boot in download and run "fastboot getvar all" then post the result here(remove imei, sn).
lucyr03 said:
You need to flash recovery from download not bootloader and you need an unlocked bootloader.
Also you can't flash ruu from recovery, you need to put the file named as 0PJAIMG.zip in the root of your fat32 formatted sdcard and boot in download.
If you need more help you need to boot in download and run "fastboot getvar all" then post the result here(remove imei, sn).
Click to expand...
Click to collapse
Thanks for your advices
Is there any way to unlock bootloader when i cant turn on phone?
Did all thing as you said. When I try it it just keeps reseting phone with HTC logo. Ive left phone for almost hour and it was still resetting, nothing other happens.
heres screen ibb.co/iK4qOH
Satreb said:
Thanks for your advices
Is there any way to unlock bootloader when i cant turn on phone?
Did all thing as you said. When I try it it just keeps reseting phone with HTC logo. Ive left phone for almost hour and it was still resetting, nothing other happens.
heres screen ibb.co/iK4qOH
Click to expand...
Click to collapse
No, you need to enable oem unlocking in settings to be able to unlock it.
Your only option is to flash it by ruu.
This is the ruu for your phone: https://androidfilehost.com/?fid=457095661767124956
Rename it to 0PJA100.zip and put in root of your fat32 formatted sdcard then boot in download and follow onscreen instructions.
Sent from my OnePlus 2 using XDA Labs
Well did as you said and problem is the same - when I start it from download mode it just keeps rebooting phone with HTC logo.
Looks like this phone is really dead thanks for your support
Satreb said:
Well did as you said and problem is the same - when I start it from download mode it just keeps rebooting phone with HTC logo.
Looks like this phone is really dead thanks for your support
Click to expand...
Click to collapse
The process completed successfully, without any errors? If so, the nand is most probably dead.
Also you can try the fastboot method to flash, maybe you have some luck...
You need htc_fastboot.exe for this
"fastboot oem rebootRUU"
"fastboot flash zip RUU.zip" - do the command again when/if it asks.
"fastboot reboot" - when the process finish.
Good Day, first time posting so here is the huge problem i have.
1 - My power button no longer works
2 - No ROM installed
3 - Vol buttons work
So due to an error on my part i wiped my system , data, delv/cache , and because i was rushing i rebooted the phone before installing the new rom. Now normally i would just boot into recovery and flash a rom, but my power button no longer works. I can get into download mode if the phone dies by holding vol down and plugging into a pc, and such can use fastboot commands, but with no Rom i cant get USB debugging to use "adb reboot recovery" . Is there anyway that i can get into recovery or a way to flash stock recovery, system and such. thanks in advance.
Bloodx32 said:
Good Day, first time posting so here is the huge problem i have.
1 - My power button no longer works
2 - No ROM installed
3 - Vol buttons work
So due to an error on my part i wiped my system , data, delv/cache , and because i was rushing i rebooted the phone before installing the new rom. Now normally i would just boot into recovery and flash a rom, but my power button no longer works. I can get into download mode if the phone dies by holding vol down and plugging into a pc, and such can use fastboot commands, but with no Rom i cant get USB debugging to use "adb reboot recovery" . Is there anyway that i can get into recovery or a way to flash stock recovery, system and such. thanks in advance.
Click to expand...
Click to collapse
Have tried an ruu? I suggest using the sdcard method. Safest.
andybones said:
Have tried an ruu? I suggest using the sdcard method. Safest.
Click to expand...
Click to collapse
i havent tried that, i thought i need stock recovery and to relock the bootloader for RUU, can you explain "SD card method" .
Bloodx32 said:
i havent tried that, i thought i need stock recovery and to relock the bootloader for RUU, can you explain "SD card method" .
Click to expand...
Click to collapse
No you don't need to lock bl. Or need stock recovery, That's outdated info.
Sure:
Download the RUU.zip file. Rename the zip file to 2PS6IMG.zip (being careful that you have file extensions turned on, or are aware that it could be renamed to 2PS6IMG.zip.zip, which is bad) Copy 2PS6IMG.zip to root of a physical SD formatted to fat32 or exfat! No internal storage!
Reboot phone to download mode and follow prompts once RUU is detected by phone.
andybones said:
No you don't need to lock bl. Or need stock recovery, That's outdated info.
Sure:
Download the RUU.zip file. Rename the zip file to 2PS6IMG.zip (being careful that you have file extensions turned on, or are aware that it could be renamed to 2PS6IMG.zip.zip, which is bad) Copy 2PS6IMG.zip to root of a physical SD formatted to fat32 or exfat! No internal storage!
Reboot phone to download mode and follow prompts once RUU is detected by phone.
Click to expand...
Click to collapse
thanks alot, i will give this a try. i can just get the latest RUU from HTC website and be fine right?
Bloodx32 said:
thanks alot, i will give this a try. i can just get the latest RUU from HTC website and be fine right?
Click to expand...
Click to collapse
Absolutely. Are you soff or son?
If son Id have to double check about locking bl but I'm quite sure that's very old info, and ruu has the stock recovery and just overwrites w.e you have
And soff you 100% don't need to mess w anything.
I'm soff/locked bl and flash ruu all the time. :good:
HTC website may even have directions but not sure.
RUU wiil wipe internal ste
andybones said:
Absolutely. Are you soff or son?
If son Id have to double check about locking bl but I'm quite sure that's very old info, and ruu has the stock recovery and just overwrites w.e you have
And soff you 100% don't need to mess w anything.
I'm soff/locked bl and flash ruu all the time. :good:
HTC website may even have directions but not sure.
RUU wiil wipe internal ste
Click to expand...
Click to collapse
i am s-on
Bloodx32 said:
i am s-on
Click to expand...
Click to collapse
Oh shoot I was thinking backwards, sorry. You need be stock ruu to turn from soff to son.
You can flash ruu np son, but it must match your cid/mid - Carrier ID / Mosel ID.
well its like a brick now anyway, im not sure if i did the CID "111111" , something like that a long time ago. well ill see what i can do, thanks for all your help
Bloodx32 said:
well its like a brick now anyway, im not sure if i did the CID "111111" , something like that a long time ago. well ill see what i can do, thanks for all your help
Click to expand...
Click to collapse
That's "SuperCID" and iirc you need soff to achieve, I have it as well set to that. It allows you to flash any ruu to your device.
Very welcome, mention me if you are in need of anything else.
andybones said:
That's "SuperCID" and iirc you need soff to achieve, I have it as well set to that. It allows you to flash any ruu to your device.
Very welcome, mention me if you are in need of anything else.
Click to expand...
Click to collapse
so i just tried "fastboot flash zip ruu.zip" and got security error , so i did "fastboot oem lock" but now i cant lock the bootloader cuz i cant press power to confirm, i will try to put it on the SD card and try to see if it'll auto flash. but other than that any other ideas? just for educational know how, im planning on ordering new a new power/vol flex cable anyway.
Bloodx32 said:
so i just tried "fastboot flash zip ruu.zip" and got security error , so i did "fastboot oem lock" but now i cant lock the bootloader cuz i cant press power to confirm, i will try to put it on the SD card and try to see if it'll auto flash. but other than that any other ideas? just for educational know how, im planning on ordering new a new power/vol flex cable anyway.
Click to expand...
Click to collapse
Dang yea I think you did f need the vol for SD method... Shoot.
But you don't need to lock bl..
That's not correct line: you need to be in rebootRUU mode.
I'm just gunna copy and paste this from vzw thread, applies to all.
"Option 1
Download the RUU.zip file. Rename the zip file to 2PS6IMG.zip (being careful that you have file extensions turned on, or are aware that it could be renamed to 2PS6IMG.zip.zip, which is bad) Copy 2PS6IMG.zip to root of a physical SD formatted to fat32 or exfat! No internal storage!
Reboot phone to download mode and follow prompts once RUU is detected by phone.
Option 2
EXE option. Download EXE file below (for windows) and simply double click to start. You can either be booted to OS with USB debugging enabled OR booted into download mode for this to start.
Option 3
Fastboot RUU mode . This method assumes you have a working ADB/Fastboot directory on your PC. Download RUU zip file and place in your working fastboot/adb directory. Boot your phone to download mode and connect to PC. Issue the following commands.
htc_fastboot oem rebootRUU
###while in this mode your phone will display an HTC logo on the screen
htc_fastboot flash zip 2PS6IMG.zip
##while in this mode you will see an HTC logo on the screen and a green status bar across the bottom of the screen. When command output ##completes it may say reboot required to flush etc... if that's the case issue a "htc_fastboot reboot-bootloader" command and restart option 1 again.
## assuming flash completes and no further flushing/reboots are requested from the cmd output you can now reboot IF you simply wish to reboot the system you can issue "htc_fastboot reboot" which will reboot system.
## expect a good 5 minute plus first boot!"