Hi all,
I re-installed stock rom and stock recovery and now i can receive official 7.0 OTA but when it tries to install the OTA on stock recovery, (after %24 processing) it says this error on attachment.
Did you restore untouched stock system image + boot image + stock recovery?
Tarima said:
Did you restore untouched stock system image + boot image + stock recovery?
Click to expand...
Click to collapse
I'd already restored stok image + stock recovery but I didn't know that I should restore boot image too. I was thinking that restoring stock image include also boot image. So should I restore boot image too?
Sent from my HTC 10 using XDA-Developers mobile app
YEK1907 said:
I'd already restored stok image + stock recovery but I didn't know that I should restore boot image too. I was thinking that restoring stock image include also boot image. So should I restore boot image too?
Click to expand...
Click to collapse
Yes I believe so. Look at the general steps in this thread:
http://forum.xda-developers.com/htc-10/how-to/guide-how-to-ota-receive-corrupt-message-t3378187
I would try restoring the boot image first, and if it still doesn't work then you can also try one of the stock recovery zips from the above thread.
Tarima said:
Yes I believe so. Look at the general steps in this thread:
http://forum.xda-developers.com/htc-10/how-to/guide-how-to-ota-receive-corrupt-message-t3378187
I would try restoring the boot image first, and if it still doesn't work then you can also try one of the stock recovery zips from the above thread.
Click to expand...
Click to collapse
Unfortunately after flashing boot image that i found inside this zip http://forum.xda-developers.com/htc...ry-ruu-ota-t3359297/post69350016#post69350016
i can not even receive the ota. it says this error :
"Can't update software"
"There was unexpected error and the file system may be corrupted etc...."
Yes now try the thread I quoted you regarding the corrupt system. Use one of the stock recoveries from that thread as they have a line in the zip package to erase the Devinfo partition.
I wasn't able to find the one matching my exact software version l, so I flashed a previous version for my phone from that thread, and with my Devinfo now erased I then flashed the latest stock recovery.img matching my firmware.
Tarima said:
Yes now try the thread I quoted you regarding the corrupt system. Use one of the stock recoveries from that thread as they have a line in the zip package to erase the Devinfo partition.
I wasn't able to find the one matching my exact software version l, so I flashed a previous version for my phone from that thread, and with my Devinfo now erased I then flashed the latest stock recovery.img matching my firmware.
Click to expand...
Click to collapse
Solved. Thank you for help.
Yesterday, after rom installation, i'd installed custom recovery for rooting and using Titanium Backup and then i think i couldn't install correct stock recovery.
Today i tried to re-install the stock rom, and directly check ota. Now i am on Android 7.0
Related
I for some reason can't get the stock recovery to flash the root file or any stock firmware. Also I can't get it to change recoveries for some reason I've tried in terminal with a few different ones and tried flashing the stock one also but it won't change. Does anything know how to fix this? Is there a back to stock thing I can flash it? I've been searching for days with no luck. Thanks
Sent from my X9006 using XDA Free mobile app
You have to flash the latest stock recovery! They patched the stock recovery and hashed for that!
Flash a custom recovery and make a nandroid backup. Save your backup for security reasons to your pc then install coloros completely new from 1.2.1and only update it with ota to 1.2.4 . Now use fastboot to boot from a custom recovery like Philz.(fastboot boot recovery.img)
Recovery.img should be replaced with the name of your recovery. Twrp won't work for this plan!, cause it don't backs up the recovery. Now make again a backup. Save the recovery.img from backup safely. Now restore your old backup and flash the captured stock recovery. Tada now your ota update should work fine!
Cheers
got it thanks a lot!! got root and that custom recovery worked! thanks again!!
Zoltan-X said:
You have to flash the latest stock recovery! They patched the stock recovery and hashed for that!
Flash a custom recovery and make a nandroid backup. Save your backup for security reasons to your pc then install coloros completely new from 1.2.1and only update it with ota to 1.2.4 . Now use fastboot to boot from a custom recovery like Philz.(fastboot boot recovery.img)
Recovery.img should be replaced with the name of your recovery. Twrp won't work for this plan!, cause it don't backs up the recovery. Now make again a backup. Save the recovery.img from backup safely. Now restore your old backup and flash the captured stock recovery. Tada now your ota update should work fine!
Cheers
Click to expand...
Click to collapse
mr2guy18 said:
got it thanks a lot!! got root and that custom recovery worked! thanks again!!
Click to expand...
Click to collapse
How did you get stock 2.0 to your phone?
Previously I flashed viper 2.7.0 custom rom and now I want to back to the stock.
I've tried restore the stock rom (CID:622, ver: 1.53.708.4) via TWRP recovery and flash the stock recovery via fastboot.
Then I relocked bootloader, however there are some problem when I enter to the android system.
First I can't search Wi-Fi and keep notice "Searching for Wi-Fi networks..." but can't search any spot.
Also, I can't receive OTA update. So I've tried to copy the OTA.zip (1.21.708.4 -> 1.53.708.4) to the sd card and flash in the stock recovery but it failed for installation aborted (status 7).
It is also falied flashing the firmware.zip inside via fastboot oem ruu mode.
I stuck in this part and I can't find any solution to solve this problem. Can anyone help?:crying:
please help
ivan232 said:
please help
Click to expand...
Click to collapse
You need to flash firmware. Firmware needs to be flashed twice. Also try find an unmodified system.img and boot, which you should have then restore that.
Edit: Or better yet i found an RUU you can use.remember it will erase all your data and internal storage
https://www.androidfilehost.com/?w=files&flid=74636
Hi All,
Previously my op3 unlocked and rooted after some days i was flashed Freedom OS 1.7 (normal) build. Now i want go back to complete stock and unroot. I follow some of the guidance videos internet and followed ,
1. Restored my backup via twrp
2. Flashed Full rom OOS 3.2.6 via TWRP
3. Flashed stock recovery via ADB. Everything works fine but
Now i am trying to update 3.2.6 to 3.2.7 getting error " Installation Failed" . Whats wrong i did .
Also i have boot logo Freedom OS don't know even i am on stock rom. Can any one help me
1. How to remove that boot logo
2. Completely go back to stock rom with stock recovery
3. Also get updates and install without fail
Please help Guys.
Thanks in Advance
Mahesh
Well, probably its a problem with your boot.img partition. Extract boot.img from stock rom zip, then flash it via fastboot flash boot boot.img and then, flash orginal recovery same as boot. Then, finally, flash via recovery STOCK ROM. Probably now it will be fine.
If not, try flash TWRP and make FULL WIPE included system partition and repeat upper steps.
Cheers.
In twrp goto wipe and do normal wipe remember don't do advance wipe otherwise it'll format internal storage as well so avoid advance wipe only do normal wipe then install full 3.2.7 zip and super su. zip
Sent from my ONEPLUS A3003 using Tapatalk
Mahesh8348 said:
Hi All,
Previously my op3 unlocked and rooted after some days i was flashed Freedom OS 1.7 (normal) build. Now i want go back to complete stock and unroot. I follow some of the guidance videos internet and followed ,
1. Restored my backup via twrp
2. Flashed Full rom OOS 3.2.6 via TWRP
3. Flashed stock recovery via ADB. Everything works fine but
Now i am trying to update 3.2.6 to 3.2.7 getting error " Installation Failed" . Whats wrong i did .
Also i have boot logo Freedom OS don't know even i am on stock rom. Can any one help me
1. How to remove that boot logo
2. Completely go back to stock rom with stock recovery
3. Also get updates and install without fail
Please help Guys.
Thanks in Advance
Mahesh
Click to expand...
Click to collapse
before you flash 3.2.7 mount system read-only. you can do this under "mount"
it is a known bug with twrp and oxygenos
You can download the stock boot logo from here: https://www.androidfilehost.com/?fid=529152257862664522
Credits goes to @jamal2367
panther124 said:
before you flash 3.2.7 mount system read-only. you can do this under "mount"
You can download the stock boot logo from here: https://www.androidfilehost.com/?fid=529152257862664522
Credits goes to @jamal2367
Click to expand...
Click to collapse
Hi you are saying in TWRP or Stock recovery? anyway i am on stock recovery . How to mount on stock recovery.
Mahesh8348 said:
Hi you are saying in TWRP or Stock recovery? anyway i am on stock recovery . How to mount on stock recovery.
Click to expand...
Click to collapse
if you are on stock recovery you cant change the mounts.
flash twrp to flash bootlogo and oxygenos 3.2.7
otherwhise you have to install via sideload but this is very slow and you cant flash stock bootlogo
so flash twrp and then mount system read-only and then flash oxygenos 3.2.7 and after or before this you can flash the stock bootlogo
panther124 said:
if you are on stock recovery you cant change the mounts.
flash twrp to flash bootlogo and oxygenos 3.2.7
otherwhise you have to install via sideload but this is very slow and you cant flash stock bootlogo
so flash twrp and then mount system read-only and then flash oxygenos 3.2.7 and after or before this you can flash the stock bootlogo
Click to expand...
Click to collapse
Thanks sir for that boot logo.
I want go complete stock without twrp. after i flash 3.2.6 via twrp it will replace twrp recovery and automatically go to stock recovery. Again i flashed stock recovery . try to update via stock recovery it shows installation failed. attached is the image for your reference. could you please suggest to install updates successfully .
Mahesh8348 said:
Thanks sir for that boot logo.
I want go complete stock without twrp. after i flash 3.2.6 via twrp it will replace twrp recovery and automatically go to stock recovery. Again i flashed stock recovery . try to update via stock recovery it shows installation failed. attached is the image for your reference. could you please suggest to install updates successfully .
Click to expand...
Click to collapse
download 3.2.7 full zip and flash it
i will show you how to get this becuase you cant download it from official site
http://forum.xda-developers.com/oneplus-3/how-to/download-install-oxygenos-3-2-7-update-t3472178
here you can get the full zip. And this zip you can flash without 3.2.6 preinstalled.
panther124 said:
download 3.2.7 full zip and flash it
i will show you how to get this becuase you cant download it from official site
http://forum.xda-developers.com/oneplus-3/how-to/download-install-oxygenos-3-2-7-update-t3472178
here you can get the full zip. And this zip you can flash without 3.2.6 preinstalled.
Click to expand...
Click to collapse
Thanks for that sir,
Every time i got update need to do like this way. or i will get updates automatically .
Mahesh8348 said:
Thanks for that sir,
Every time i got update need to do like this way. or i will get updates automatically .
Click to expand...
Click to collapse
You should get it automatically
i tried rollback from Oreo to Nought. after flashing .img files through TWRP i got error like.......,
Error
Func no: 10 (boot image)
error no: 2 (load failed)
please help. suggest the Oreo stock boot.img link
thanks in advance
if same post already exist pls link me through
i searched xda i didn't find a solution.
i've unlocked bootloader !
babu.123 said:
i tried rollback from Oreo to Nought. after flashing .img files through TWRP i got error like.......,
Error
Func no: 10 (boot image)
error no: 2 (load failed)
please help. suggest the Oreo stock boot.img link
thanks in advance
if same post already exist pls link me through
i searched xda i didn't find a solution.
i've unlocked bootloader !
Click to expand...
Click to collapse
Roll-back is possible, but not like that.
To help or suggestions what you I can try. Will need to know what you flashed, where you flashed it, what was any message after or during flashing.
Also need to know if twrp also gives this type of message, or if it boots.
As far as link to Oreo stock images. Need to know what model and build number. (You know there are almost 10 model/region combo's and each has at least 3 builds)
mrmazak said:
Roll-back is possible, but not like that.
To help or suggestions what you I can try. Will need to know what you flashed, where you flashed it, what was any message after or during flashing.
Also need to know if twrp also gives this type of message, or if it boots.
As far as link to Oreo stock images. Need to know what model and build number. (You know there are almost 10 model/region combo's and each has at least 3 builds)
Click to expand...
Click to collapse
Model : BND-al10
Got oreo as beta tester.
From firware finder app download roll back full ota package. And extracted that update.app and flashed boot, system, and stock recovery.
After that try to reboot the device. Stucked at bootloop.
Twrp is working. When i try to restore (i had backup the system, ext. Data) restore process success but error ahows as
Alert
Update the system again
Error
Func no: 10 (boot)
Error no: 2 ( load failed).
I tried another zip files to flash through memory card but zip loading failed in twrp.
babu.123 said:
Model : BND-al10
Got oreo as beta tester.
From firware finder app download roll back full ota package. And extracted that update.app and flashed boot, system, and stock recovery.
After that try to reboot the device. Stucked at bootloop.
Twrp is working. When i try to restore (i had backup the system, ext. Data) restore process success but error ahows as
Alert
Update the system again
Error
Func no: 10 (boot)
Error no: 2 ( load failed).
I tried another zip files to flash through memory card but zip loading failed in twrp.
Click to expand...
Click to collapse
Should have used hwota or hurupdater to flash the fullota, not extract the images, but too late for that.
Wow, what a mess.
For starters, to explain some of what seems to have happened.
Nougat and oreo have different partitions. Not only in name but also location.
Twrp cannot create any partition.
That being said, Oreo does not have a boot or recovery partition, so where did you flash the boot.img and recovery.img
It is obvious the stock recovery flash was not to "recovery_ramdisk" because twrp still working.
Not quite sure what parts were in you backup that you tried. And the " other zip " is a mystery.
I would think, since twrp is loading that using hurupdater might still be an option.
Thanks for your advice. Get back to system with oreo with the help of hurupdater.
1st i have no idea what is hurupdater is. But i Google for it. And now i am able use my mobile.
Thanks a lot
mrmazak said:
Should have used hwota or hurupdater to flash the fullota, not extract the images, but too late for that.
Wow, what a mess.
For starters, to explain some of what seems to have happened.
Nougat and oreo have different partitions. Not only in name but also location.
Twrp cannot create any partition.
That being said, Oreo does not have a boot or recovery partition, so where did you flash the boot.img and recovery.img
It is obvious the stock recovery flash was not to "recovery_ramdisk" because twrp still working.
Not quite sure what parts were in you backup that you tried. And the " other zip " is a mystery.
I would think, since twrp is loading that using hurupdater might still be an option.
Click to expand...
Click to collapse
Thanks for that idea. It worked. Now my mobile is working.
Using hurupdater flashed stock rom of full ota. Thanks a lot
I was unable to flash stock rom update(.ozip file) via TWRP recovery. I was also unable to flash stock recovery as any solid download tool was not available. I was also unable to retrieve the ota downloaded in /data partition(/data/Colouros/Ota), if I could that then using ozip decrypting tool, I could have converted the ozip to zip. What I did at the end I locked the bootloader back again which then wiped everything including twrp. I had to presse volume down button while it showed "Can't boot as the image is destroyed...". Finally the device booted me to the initial set up screen and the stock recovery was restored.
This process will erase everything in internal storage.
I posted this as I could not find anything with the link to restore stock color os recovery. I hope it might help somebody.
Try this
https://drive.google.com/file/d/1PNJh9OubB7DF_NLvAh4GohTyjK-ow-IR/view?usp=sharing
Arny209 said:
I was unable to flash stock rom update(.ozip file) via TWRP recovery. I was also unable to flash stock recovery as any solid download tool was not available. I was also unable to retrieve the ota downloaded in /data partition(/data/Colouros/Ota), if I could that then using ozip decrypting tool, I could have converted the ozip to zip. What I did at the end I locked the bootloader back again which then wiped everything including twrp. I had to presse volume down button while it showed "Can't boot as the image is destroyed...". Finally the device booted me to the initial set up screen and the stock recovery was restored.
This process will erase everything in internal storage.
I posted this as I could not find anything with the link to restore stock color os recovery. I hope it might help somebody.
Click to expand...
Click to collapse
I am using Evolution OS on my Realme 2 Pro, now I want to get back to Color OS, could you help me out ??
vilek69 said:
I am using Evolution OS on my Realme 2 Pro, now I want to get back to Color OS, could you help me out ??
Click to expand...
Click to collapse
You have to download the stock ozip file from realme website(https://www.realme.com/in/support/software-update), then convert it to zip(https://forum.xda-developers.com/realme-2-pro/how-to/convert-ozip-to-zip-installing-stock-t4065277), then flash it via twrp, remember to wipe data, as sometimes while reverting back to stock can cause issues, like screen freezing, unable to unlock phone, use subhams recovery(https://drive.google.com/file/d/1Hkv2i0xqzO7o7RrxoFNRHqKyK1Z6eDwD/view?usp=sharing) to flash the stock rom.
recovery?
Arny209 said:
You have to download the stock ozip file from realme website(https://www.realme.com/in/support/software-update), then convert it to zip(https://forum.xda-developers.com/realme-2-pro/how-to/convert-ozip-to-zip-installing-stock-t4065277), then flash it via twrp, remember to wipe data, as sometimes while reverting back to stock can cause issues, like screen freezing, unable to unlock phone, use subhams recovery(https://drive.google.com/file/d/1Hkv2i0xqzO7o7RrxoFNRHqKyK1Z6eDwD/view?usp=sharing) to flash the stock rom.
Click to expand...
Click to collapse
when i stock the official OS back do i get back the official device's recovery or the twrp??
and the ozip for realme 2 pro isnt available on the website
vilek69 said:
when i stock the official OS back do i get back the official device's recovery or the twrp??
and the ozip for realme 2 pro isnt available on the website
Click to expand...
Click to collapse
ozip is available from the website.
If you flash stock rom zip via twrp, twrp will remain, if you relock the bootloader, the phone will format automatically and stock recovery will come back.