Hello everyone,
My mi max FP sensor vibrates in response to touch with the home,back,multitask buttons lighting for a couple of times while it's powered off!!!
Is this normal?!!
Make sure that the proximity sensor is not covered when you try to wake up the phone with fingerprint sensor.
This should not be normal...
Related
My new defy 's proximity sensor seems cannot work correctly,when i making a call ,the screen shut off immediately，and the screen could not light on by any key,but when i touch the proximity sensor with my finger,the screen may be light on!
so i download a app to test the proximity sensor which name's"Android sensor data",this app fingue out the state of proximity sensor,"near" or "far",sometimes I just passing my finger over the proximity sensor, the reading will show 'near' and then remain 'near' even when my finger is moved away!
Can anyone else help me to calibrate the proximity sensor?google told me some android phone can do this ,such as htc, zte etc.
goole tell me android phone have some standard testcode,such as *#*#4636#*#* can show the phone statue,it works correstly in Defy,*#*#0588#*#* test the proximity sensor ,but it doesn't work in defy!!!
is in-pocket detection enabled?
it gave me lots of problems in the past
Anyone have any issues with the proximity sensor not working when on a call? My Note 8 will not turn the screen off when it is to my ear. I have remove the screen protector and the case and still no luck. I can't find a setting to turn it on/off.
So here is the thing,
Yesterday before going to sleep, tap to ambient display was working without a problem. Today the tap to ambient wakeup doesn't work at all. D2W was always turned off. I didn't install anything and my device is not rooted as well. What could be the problem?
EDIT : Found the solution on OP forums. :laugh:
For anyone facing the same problem.
HERE'S THE FIX:
CULPRIT: Proximity Sensor.
LOCATION: Just below the Front Camera. It you Flash a bright LED light you would see 2 small sensors on the screen it self.
HOW TO: Whenever your Ambient Display stops working-
1. Just turn off the display by pressing the power button once.
2. Now take a bright LED light preferably use another smartphone's LED Flashlight.
3. Just bring the light close to the proximity sensor, the turn on the display by pressing the power button then turn it off. Repeat this 2-3 times.
You will notice that the double tap to wake and raise to wake feature start working again.
Well mine did 3 out of 3 times.
It's basically the issue of the proximity sensor that need recalibration.
I hope someone from the OnePlus team is reading this and does the needful to fix this issue once and for all.
Till then keep trying my LED flashlight method to reactivate the Ambient Display.
Proximity sensor is not working at all in my Redmi Note 8 Pro. Screen remains always on during calls. I have tried to calibrate it through CIT menu but the value remains to 5.0 even hovering over it. Please, help !
Unfortunately I have the same problem, rotating the phone horizontally and back vertically sometimes helps to automatically turn off screen during calls... or... pressing power button :/
For me sensor problem "only" occurs in 50% of connections
Hello,
I have a issue on the lockscreen, when receive new notifications the lockscreen don't wake up to show the new notifications. I have ambiant display enabled with the correct settings. Running latest oxygen oos.
Any help appreciated to fix this issues.
Regards ysco..
Here is what helps for most users:
HERE'S THE FIX:
CULPRIT: Proximity Sensor.
LOCATION: Just below the Front Camera. If you Flash a bright LED light you would see 2 small sensors on the screen itself.
HOW TO: Whenever your Ambient Display stops working-
1. Just turn off the display by pressing the power button once.
2. Now take a bright LED light, preferably use another smartphone's LED Flashlight.
3. Just bring the light close to the proximity sensor (1-2mm away) and hold it for 4-5 seconds, then turn on the display by pressing the power button then turn it off. Repeat this 2-3 times.
You will notice that the double tap to wake and raise to wake feature starts working again.
Well mine did 3 out of 3 times.
It's basically the issue of the proximity sensor that need recalibration.
I hope someone from the OnePlus team is reading this and does the needful to fix this issue once and for all.
Till then keep trying my LED flashlight method to reactivate the Ambient Display.
Asmund said:
Here is what helps for most users:
HERE'S THE FIX:
CULPRIT: Proximity Sensor.
LOCATION: Just below the Front Camera. If you Flash a bright LED light you would see 2 small sensors on the screen itself.
HOW TO: Whenever your Ambient Display stops working-
1. Just turn off the display by pressing the power button once.
2. Now take a bright LED light, preferably use another smartphone's LED Flashlight.
3. Just bring the light close to the proximity sensor (1-2mm away) and hold it for 4-5 seconds, then turn on the display by pressing the power button then turn it off. Repeat this 2-3 times.
You will notice that the double tap to wake and raise to wake feature starts working again.
Well mine did 3 out of 3 times.
It's basically the issue of the proximity sensor that need recalibration.
I hope someone from the OnePlus team is reading this and does the needful to fix this issue once and for all.
Till then keep trying my LED flashlight method to reactivate the Ambient Display.
Click to expand...
Click to collapse
Hello mate,
Thx for the reply but as mentioned I have a 7t that doesn't have the proximity sensor anymore?
AOD works but the notifications are not light up the lockscreen when receive them on the lockscreen. With or without AOD enabled.
Regards ysco..