Recently switched LTE carrier for the N7 and the sim caught a pin on its way out. Broke it unfortunately Anyone know the part number for the board holding the SIM card reader? Been Googling but can't seem to find it Was able to find replacement card readers but I suck at surface mount soldering so that won't work.
scoliosis said:
Recently switched LTE carrier for the N7 and the sim caught a pin on its way out. Broke it unfortunately Anyone know the part number for the board holding the SIM card reader? Been Googling but can't seem to find it Was able to find replacement card readers but I suck at surface mount soldering so that won't work.
Click to expand...
Click to collapse
Hi, here is the part number and you can get it from ebay but often the touch function is lost after replacing this board.
Just get something like this instead. It's a cheaper and simpler solution to the problem.
There is another option though. While SMD soldering is difficult, you could easily solder a wired SIM card permanently there.
:good:
Thanks! I will look into it and see what I can do. I rather not have to carry an external mifi device.
Related
I damaged(torn off) two of the pins from the sim card reader under the battery from the T-Mobile Touch Pro 2, while taking the sim card out (its a pain taking it out)
now it will not read the sim cards...
PLAN A) i will try to convince HTC to replace it under HTC's manufacturer Warranty...
PLAN B) buy another T-Mobile Touch pro 2 cheap damaged and swap the mainboards, or buy the mainboard if possible alone...
PLAN C) fix it myself by replacing it with one from eBays "Blackberry Curve Card Holder"
PLAN D) leave it on my desk until the dust covers it, and i no longer remeber of the phone...LOL..
so anyone else damaged the sim reader or any other part of the phone???
and yes, i will post pictures of the phone...and the progress of the fix(if i fix it)...and that is not the actual picture,...its a FCC pic. that is where the sim reader is....if i choose to fix it, i think i don't even have to unscrew the back housing since i can even see the solder connections with the battery removed
Hey, how did you damaged them? I have just realised that I have the same problem in one of my xperia x1. When I look at sim slot I can see two pins which looks different from the others and from this in my second (working) xperia. Now I am thinking how to get to them.
I'd like to hear the "ran over" story...
After 7 months of daily heavy usage
Nothing really, only a few minor scratches here and there, that´s it
My Samsung Galaxy S II (SGH-T989) phone will not detect my sim card. This started happening after I opened up the phone and nearly broke it trying to remove the "motherboard"? I know I caused it, but the problem is I don't know what it is I have to replace in order to fix it.
Below are some photos that could possibly help. The first photo, the part highlighted by the yellow circle, that part was bent off when i tried removing the board. Don't know if that would affect the sim card or not
The next photo, this cable I'm not absolutely sure what its purpose is for. This is not the original cable, the original cable was broken off somehow so i bought a different cable off ebay. Not sure how this affects the phone.
It could be the sim card and memory card part entirely except its hooked in fine and I have no other reason for it to stop working.
I don't mind buying parts except there's not much for sale. The only parts for sale ANYWHERE is the sim card and memory part and the usb port.
So my question I guess would be what exactly could be causing this sim card issue considering the actions I've taken with opening my phone?
If you're not familiar with what error I speak of, it's when instead of the bars you see a BLOCKED icon.
Any help would be great, thank you.
if you have nano sim and want to use it in s4, do not try to be adapted to support sim kills(some clips). go to the phone operator to change it with MICROSIM(sory for my english)
May I know what will happen if one were to do so?
adapter will break some clips on sim suport and phone dont see your sim.you will have to go to service.
Whosat said:
May I know what will happen if one were to do so?
Click to expand...
Click to collapse
nasol
bgmarian said:
adapter will break some clips on sim suport and phone dont see your sim.you will have to go to service.
Click to expand...
Click to collapse
Everything works perfect with nanosim to microsim adapter in my GS4m. You just need to be careful and use a good quality adapter!
Agreed. I think it isn't an issue with using a sim card adapter - you can probably break the clips if you aren't careful using a standard microsim as well.
do not use sim card adapter!
i second this! i had a nano simcard and purchased an adaptor after the 1st time it went in ok and needed to use the sim in a different phone for holiday came back and went to change sim card back and after swearing and being as careful as i could the sim came out the adaptor and got stuck it had bent the sim contacts. its currently being repaired by samsung. under warranty i dont know lol as ive not heard back and they seem to be going ahead with the repair.
Sorry to drag an old thread up but it's just happened to my good old Desire HD.. pulling the sim and adaptor out also pulled the sin contacts out and one's now snapped off.. Just a warning to people.
StuPot82 said:
Sorry to drag an old thread up but it's just happened to my good old Desire HD.. pulling the sim and adaptor out also pulled the sin contacts out and one's now snapped off.. Just a warning to people.
Click to expand...
Click to collapse
My nano sim worked just perfectly without an adapter. Just slide it in right and it works.
I can confirm, even though I haven't used a nano to micro sim adapter. The clips are very sensitive, I nearly broke one by inserting a custom cut micro-sim. Luckally a needle and some tweaking solved the issue.
So I thought I'd try soldering a tiny shaped bit of metal onto the bit that was left but the solder wouldn't take and I'm a little reluctant to try any more as I'm no doubt going to knacker the phone.
I thought I'd try super glueing a bit to it next.. what's people's thoughts on that? Is it going to cause any other problems? Possibly getting too warm and the glue melting and sticking to other parts?
The problem is you need to becareful when putting the sim into the phone or removing it, that is the cause of it, if using a adapter always stick a small piece of cellotape at the back of the sim and adapter, this will hold the sim in the adapter.
Hello, I accidentally damaged my sim tray and now only one of five sim cards works. I put crappy nano sim adapter in tray and when I pull it out, adapter rip off one golden pin. There were three and now is only one.
Is it something which is repairable?
Whoaes! That aints no goods..
DO you still have the pin? You night be able to work it back into the hole and have it connect well enough to be used again.
Otherwise, you can look online for Gnex parts and attempt to replace the component that holds the sim card. But if you are really stuck, you might be advised to either take it to a professional for repair, or replace the phone entirely with a new model. Either a different, phone, or another Gnex, which you should be able to find used all over the place.\
I really don´t need that phone, I have new one few months, but I want to sell it. Maybe I would find someone who will buy damaged phone but hoped that it is not as bad.
It ´s sad, beside this the phone is in excelent condition
One thing, some sim card work like normal and other sim card from differetn operator is not recognized.
I've scoured the internet for a replacement video on the sim tray. these parts are 6$ on ebay but it seems to be soldered to the motherboard. No idea where to go from here. I flashed a rom thursday and i thought it was the radio on the rom but i went back to my backup and it's not. and i can see the pins missing on the sim tray. Anyone know an easy way to replace this?
http://www.ebay.com/itm/SIM-Card-Re...LG-G3-D850-D855-VS985-LS990-New-/161425661301
Also, a word of warning: a $5 sim card adapter isn't worth using in a $500 phone. i have the moto x and would switch back and forth and the connecting pins finally broke. googling it, i now see its not an uncommon issue. just no replacement video.