Develop Bugs

Has Anyone Bricked the Device on 5.0.2 that manually flashed a factory image?

As the title states, has anyone's 2013 n7 bricked after the 5.0.2 update when flashing a factory image instead of the OTA? Mine bricked after taking the 5.0.1 OTA, but i now have it back from Asus after repair and am wanting to flash the factory image to 5.0.2. However, if anyone has experienced bricking as a result of this (or 5.0.1 or 5.0) being flashed and not just the OTA, which we know is bricking devices, then I will stick with 4.4.4 for now.
Thanks

You can not brick a Nexus 7 unless you somehow screw up the bootloader and can no longer enter the bootloader.

khaytsus said:
You can not brick a Nexus 7 unless you somehow screw up the bootloader and can no longer enter the bootloader.
Click to expand...
Click to collapse
Well then some form of that must be happening due to or in very strange coincidence with the 5.0, 5.0.1, and 5.0.2 updates - just ask those of us whose tablets turned off only to turn on and be stuck at the google logo with so far zero solution for fixing it other than a hardware replacement. My tablet was at ASUS's repair factory for almost a month and had the motherboard replaced. This was after a "successful" OTA update to 5.0.1 that worked for a few days and then died. This has happened more than just infrequently to many members on here recently.
So what I would like to know is is anyone experienced the same "successful update" and then a few days later a dead tablet via factory image flashingof 5.0+. We already know that taking the OTA to 5.0+ might be a problem, and before I flash up to 5.0.2 I'd like to hear if anyone did a manual factory image flash and still had the die a few days later issue, despite not going via OTA.

Norcalz71 said:
Well then some form of that must be happening due to or in very strange coincidence with the 5.0, 5.0.1, and 5.0.2 updates - just ask those of us whose tablets turned off only to turn on and be stuck at the google logo with so far zero solution for fixing it other than a hardware replacement. My tablet was at ASUS's repair factory for almost a month and had the motherboard replaced. This was after a "successful" OTA update to 5.0.1 that worked for a few days and then died. This has happened more than just infrequently to many members on here recently.
So what I would like to know is is anyone experienced the same "successful update" and then a few days later a dead tablet via factory image flashingof 5.0+. We already know that taking the OTA to 5.0+ might be a problem, and before I flash up to 5.0.2 I'd like to hear if anyone did a manual factory image flash and still had the die a few days later issue, despite not going via OTA.
Click to expand...
Click to collapse
I don't understand the obstinance regarding official LP flashing. OTA has been pulled from the shelf, lots have killed their devices with it, so it's obvious something seriously wrong is going on. I've been flashing CM and other custom roms derived from LP without problems. Why insist on incantations? This is not the first time Asus screws up with its firmwares! LP ain't nothing special that's worth it.

graphdarnell said:
I don't understand the obstinance regarding official LP flashing. OTA has been pulled from the shelf, lots have killed their devices with it, so it's obvious something seriously wrong is going on. I've been flashing CM and other custom roms derived from LP without problems. Why insist on incantations? This is not the first time Asus screws up with its firmwares! LP ain't nothing special that's worth it.
Click to expand...
Click to collapse
So you are saying LP Roms/factory images should be just fine, provided they don't go OTA? I'm sure most are, my concern is if anyone has experienced a failure hours/days after flashing to LP

Norcalz71 said:
So you are saying LP Roms/factory images should be just fine, provided they don't go OTA? I'm sure most are, my concern is if anyone has experienced a failure hours/days after flashing to LP
Click to expand...
Click to collapse
Given previous experiences with Asus JB on another model, I'd avoid anything "official" like the plague, and wait till major bugs are swatted. Clearly, I'm not saying "LP Roms/factory images should be just fine." But I've been flashing custom roms based off LP, and nothing out of the ordinary has happened. They work fine. What I don't get is people would insist on flashing the crappy OTAs Asus has been putting out in the face of so much bricking.

Asus doesn't put out updates for the N7; Google does.

Telyx said:
Asus doesn't put out updates for the N7; Google does.
Click to expand...
Click to collapse
I don't see the difference. Just because Google funded and marketed the device doesn't make it less Asus. An Asus is an Asus is an Asus, whether you buy it at Staples or in China. I seriously doubt the firmwares are 100% (or 10% for that matter) Google unless one can prove to the world otherwise.

I haven't bricked mine, and I manually updated using the 5.0.1 (and then 5.0.2) image on Google's site. However, I also have an unlocked boot loader (It was unlocked about an hour after we got it home, and hasn't been locked since) and modified /system partition. I have always manually updated the software images from fastboot.

You're saying Asus makes aosp? No. Google makes the software for nexus devices.
Asus assembled the hardware. Google makes the software (aside from proprietary drivers, of which Asus made only audio and "sensors").
Asus has very little to do with the n7 aside from the fact that they put it together.

jshamlet said:
I haven't bricked mine, and I manually updated using the 5.0.1 (and then 5.0.2) image on Google's site. However, I also have an unlocked boot loader (It was unlocked about an hour after we got it home, and hasn't been locked since) and modified /system partition. I have always manually updated the software images from fastboot.
Click to expand...
Click to collapse
Mine will remain unlocked from now on. I took it from 4.4.2 back to 4.4.4 (since after repair it was back to original and wiped) via fastboot, and will probably wait awhile longer to update it via fastboot to 5.0.2. No more OTA for me though.

New Nexus Owner Seeking Advice

Hi folks! Just received a 2013 Nexus 7 from my fiancé as a birthday gift. I wanted it for quite specific purposes so was hoping I could ask a few questions here and get pointed in the right direction before I start using this thing
I intend to mainly use the tablet for remote play with my PS4 and emulating old console games. Since I want to connect a PS4 controller to it wirelessly I'm told I need to root the device. I'm guessing this is an easy process and there are some guides on the site here?
The main thing I was after advice about is firmware updates. The system came on 4.3 and has already downloaded an update for 4.4.2 but I haven't installed that yet. Is this firmware fine to upgrade to? Any performance issues? I've heard people saying that upgrading their Nexus to 5+ (Lollipop?) has created a load of performance issues and this should be avoided? Also, if I upgrade to a certain firmware version can I lock myself out of being able to root the device? I'm pretty sure all of the apps I was planning on using work no 4.3 so I have no reason to upgrade at all but if I can go safely to a higher firmware that is reliable with no performance issues I may as well?
First time using an Android device so sorry if my questions come off as a little stupid. Also, wasn't sure if I should post this here or if it should be on the Q&A board so sorry if I've got that wrong!

As far as I know, the problems with lollipop were the standard number of complaints that come with any new release. Well, I'm not really positive, but lollipop seems fine to me and I think most people have upgraded by now. I would go for it because I think it's really fun to use.... Plus you can always revert if you choose.
As far as rooting, you never need to worry about not being able to do it... Rooting your Nexus 7 will always be easy. The by-hand method is fun and relatively simple, or you can just use the toolkit in the forum to do it even easier.

^Yeah I'll echo that. Lollipop is good. The people having problems don't know what they're doing. Flash the factory image.
If you want root you can use cfautoroot or simply flash twrp with fastboot then flash the su.zip

Personally, I'd stick go for 4.4.4, as 5, 5.0.1 & 5.0.2 all have a memory leak issue. You may also find more emulator compatability as Kit Kat has been around a year longer than Lollipop. The only downside to KK over L is the battery life is a little worse IMO.
I dont think the memory leak issue is a result of someone not knowing what they are doing etc.

Thanks for all the advice everyone
yosmokinman said:
^Yeah I'll echo that. Lollipop is good. The people having problems don't know what they're doing. Flash the factory image.
If you want root you can use cfautoroot or simply flash twrp with fastboot then flash the su.zip
Click to expand...
Click to collapse
I'm fairly competent with computers (as I should be with a degree in computer science!) but this is all like a foreign language to me. I guess I'm better sticking with the toolkit for now until I'm familiar with all the lingo?
Masteryates said:
Personally, I'd stick go for 4.4.4, as 5, 5.0.1 & 5.0.2 all have a memory leak issue. You may also find more emulator compatability as Kit Kat has been around a year longer than Lollipop. The only downside to KK over L is the battery life is a little worse IMO.
I dont think the memory leak issue is a result of someone not knowing what they are doing etc.
Click to expand...
Click to collapse
Thanks. This is the sort of advice I was after and is why I mentioned what I was planning on using it for. The device has already downloaded 4.4.2 and wants to update to that. Is there a way I can manually go to 4.4.4? I'm worried it will just request an update from the Google server and try to jump straight to a version of 5

chunk3rvd said:
Thanks. This is the sort of advice I was after and is why I mentioned what I was planning on using it for. The device has already downloaded 4.4.2 and wants to update to that. Is there a way I can manually go to 4.4.4? I'm worried it will just request an update from the Google server and try to jump straight to a version of 5
Click to expand...
Click to collapse
If you unlock the bootloader then familiarise yourself with ADB and flashing factory images, you can manually flash any version of Android (That has been availible for your device,) manually. You dont need to be rooted to do this.
It also allows you to go back when you've made the mistake of updating, (but does wipe all of your data!)

It ended up offering me the updates incrementally anyway. I went from 4.3 > 4.4.2 > 4.4.3 > 4.4.4 which I'm currently on and will leave it there for now. It's downloaded 5.0.2 but I've skipped the install for the time being
Think I need to do a little reading up before I root the device as I haven't got a clue what some of you are talking about haha. Thanks for all the advice so far though

No problems.
I've had a few Nexus devices and never felt the need to root them. :angel:

yosmokinman said:
^Yeah I'll echo that. Lollipop is good. The people having problems don't know what they're doing. Flash the factory image.
If you want root you can use cfautoroot or simply flash twrp with fastboot then flash the su.zip
Click to expand...
Click to collapse
The majority of problems stem from Qualcomms crappy broken mess Adreno gpu drivers, hence the delayed
rollouts of Android for the Nexus 4 and 7 that both use the Adreno 320, don't be suprised if the Nexus 4 and 7 get a
Android 5.1.1 release instead.

For ppl new to nexus devices, wugfresh nexus root toolkit is a great tool until you get the hang of adb and fastboot. With a nexus you can always switch between android versions. You can always root, or go back to older versions of android. Updating to newer versions never hurts anything because you can always go back. Its a developers device so its very versatile. Try lollipop if you like, (I love it) and if its not your thing, just flash back to 4.4.4. I love this tablet.

madbat99 said:
For ppl new to nexus devices, wugfresh nexus root toolkit is a great tool until you get the hang of adb and fastboot. With a nexus you can always switch between android versions. You can always root, or go back to older versions of android. Updating to newer versions never hurts anything because you can always go back. Its a developers device so its very versatile. Try lollipop if you like, (I love it) and if its not your thing, just flash back to 4.4.4. I love this tablet.
Click to expand...
Click to collapse
You for got to mention the disclaimer if your tab came with 5.x.x out of box you cant go back to KK. Also a lot of us who recently bought Nexus 7, I have 3 that I have acquired, came with 5.0.1 installed are having issues with partitions/memory mounting in recovery. Some sort of revision done in the latest batch sent out. If his tab came with 5.0.1 or higher and has his bootloader at FLO 4.04 he may have problems trying to go back with either bootloops and what not.

masterchiefb117 said:
... with 5.0.1 installed are having issues with partitions/memory mounting in recovery...
Click to expand...
Click to collapse
Seems to be solved in TWRP_multirom_(flo|deb)_20150328 (updated to 2.8.6.0)
See http://forum.xda-developers.com/showpost.php?p=45886569&postcount=1

[Q] Confused...

So i'm confused about this whole thing with ROMs and firmware and the Viper One 3.0.0 that was just released.
I've been playing it safe with ROMs, being outdated regularly because "it worked". Probably not the best choice for security reasons, but wiping my phone and reinstalling the OS, restoring all the apps, is time consuming and something I try to avoid doing as much as possible.
So Saturday I upgraded my phone from 1.9.1 of Viper One M9 to 2.3.0, then took the OTA to 2.3.1. Previously I installed 1.9.1 and a week later 2.0.0 came out. So I waited until this weekend to finally go to 2.x.x. In a mean twist of fate, less than 24 hours later I'd find that Viper One M9 3.0.0 is out. So no matter what I try to do it seems I'm in for perpetual upgrades, wiping and reinstalling the OS, restoring apps, etc.
So here's my questions:
1. Do I actually need to install any firmwares for this? I see dottat's thread http://forum.xda-developers.com/verizon-one-m9/general/official-ruu-1-33-605-15-t3137397 and I'm not sure if I'm supposed to install that first. My instinct is "no" but I would like to verify that before I try to go to 3.0.0.
2. If it's not required, is it at least optional? If so, what benefits are we aware of that the new firmware will fix? I get the impression that the firmware update isn't truly supported with Viper One M9 since the firmware hasn't been officially released, nor was it unofficially released before the compiled 3.0.0 build was released.
3. How "official" is the 1.33.605.15 that I just linked above? Is it 100% for sure going to be the next release and we're just waiting for it to be pushed out as an OTA update? When I had my Droid Bionic we had something like 20+ "unofficial" builds of ICS that were leaked early, and ultimately the one that was released OTA was 3 or 4 versions behind what was the 'latest'. Definitely created problems for some people and not looking to see that happen to me.
4. When I do an upgrade of Viper One, I normally do the full wipe and then have to restore the apps with titanium backup, then the SMS messages that I have with another app, resetup the icons on my screens, resetup the viper settings, etc. Takes me basically a full day to re-test and re-setup everything how I like it. Is there a better way that doesn't take all day? I'd prefer to be on the latest, but with the constant restoring I'm pretty much always behind because I don't have the 8+ hours it takes to resetup my phone exactly how I want it every time an update comes out. I've heard the non-wiping is not recommended, so I've never tried that. Is it actually safe and effective?
5. Anyone using 3.0.0 and having any problems or comments?
In case anyone asks, the phone is s-off, rooted, etc by the mighty dottat with his Java card.
Thanks,
-Josh

Joshy8 said:
So i'm confused about this whole thing with ROMs and firmware and the Viper One 3.0.0 that was just released.
I've been playing it safe with ROMs, being outdated regularly because "it worked". Probably not the best choice for security reasons, but wiping my phone and reinstalling the OS, restoring all the apps, is time consuming and something I try to avoid doing as much as possible.
So Saturday I upgraded my phone from 1.9.1 of Viper One M9 to 2.3.0, then took the OTA to 2.3.1. Previously I installed 1.9.1 and a week later 2.0.0 came out. So I waited until this weekend to finally go to 2.x.x. In a mean twist of fate, less than 24 hours later I'd find that Viper One M9 3.0.0 is out. So no matter what I try to do it seems I'm in for perpetual upgrades, wiping and reinstalling the OS, restoring apps, etc. [emoji14]
So here's my questions:
1. Do I actually need to install any firmwares for this? I see dottat's thread http://forum.xda-developers.com/verizon-one-m9/general/official-ruu-1-33-605-15-t3137397 and I'm not sure if I'm supposed to install that first. My instinct is "no" but I would like to verify that before I try to go to 3.0.0.
2. If it's not required, is it at least optional? If so, what benefits are we aware of that the new firmware will fix? I get the impression that the firmware update isn't truly supported with Viper One M9 since the firmware hasn't been officially released, nor was it unofficially released before the compiled 3.0.0 build was released.
3. How "official" is the 1.33.605.15 that I just linked above? Is it 100% for sure going to be the next release and we're just waiting for it to be pushed out as an OTA update? When I had my Droid Bionic we had something like 20+ "unofficial" builds of ICS that were leaked early, and ultimately the one that was released OTA was 3 or 4 versions behind what was the 'latest'. Definitely created problems for some people and not looking to see that happen to me.
4. When I do an upgrade of Viper One, I normally do the full wipe and then have to restore the apps with titanium backup, then the SMS messages that I have with another app, resetup the icons on my screens, resetup the viper settings, etc. Takes me basically a full day to re-test and re-setup everything how I like it. Is there a better way that doesn't take all day? I'd prefer to be on the latest, but with the constant restoring I'm pretty much always behind because I don't have the 8+ hours it takes to resetup my phone exactly how I want it every time an update comes out. I've heard the non-wiping is not recommended, so I've never tried that. Is it actually safe and effective?
5. Anyone using 3.0.0 and having any problems or comments?
In case anyone asks, the phone is s-off, rooted, etc by the mighty dottat with his Java card.
Thanks,
-Josh
Click to expand...
Click to collapse
There's newer firmware out. Look in neo's 5.1 deodex thread. That os is also 5.1 (rom).
Sent from my HTC6535LVW using Tapatalk

LOL! So it is! I saw it last night and somehow I screwed up and linked to your thread. Hooray for tired long days.

1. You do need to update your firmware to 2.6.605.10 before installing ViperOneM9 3.0.0, or you will most likely see a bootloop or have other issues.
2. ViperOneM9 3.0.0 was based on the 2.6.605.10 firmware that is posted in NEO's thread. Bottom line is that you should be on that firmware before flashing viper.
3. The 2.6.605.10 firmware is official, but prerelease, and it is very likely not the final version that will be released when the FOTA is pushed out to the public. You can just flash the firmware of the final release version when that is released, so you don't need to worry about being ahead/behind the release version.
4. On ViperOneM9, there is no reason to do a full wipe unless you are coming from another ROM. If you read the thread, you will see that the developers and most of the people around there haven't done a clean flash since their first flash of viper. Make a backup before flashing, and you can always revert to that if you have an issue when you dirty flash.
5. 3.0.0 is working great. No reason not to update.

Thanks for the response bschram. It is appreciated.
I actually wiped my phone and installed 3.0.0 without updating the firmware. Phone still works fine, but I will be updating the firmware as soon as I am confident I know what I'm doing with firmware upgrades. I'm a bit more nervous about updating firmware as I don't want to break the phone.
I'm glad to hear that I don't have to do a full wipe, and I'll definitely be doing that going forward. I will say that 3.0.0 is way more reliable than 1.9.1 was.

Just to make sure I am doing things correctly.... I am not totally new to this. Coming from stock 5.0.2... with S-off/Bootloader Unlocked. Flash firmware from NEO's deodexed rom in fastboot, advanced wipe in TWRP, then flash any 5.1 rom that is compatible IC, Viper, ect.... Then we should be good to go?
Then when offical OTA arrives, wait until firmware is pulled then flash the same way? Just making sure I will doing things right..... Thanks in advance

bschram said:
1. You do need to update your firmware to 2.6.605.10 before installing ViperOneM9 3.0.0, or you will most likely see a bootloop or have other issues.
2. ViperOneM9 3.0.0 was based on the 2.6.605.10 firmware that is posted in NEO's thread. Bottom line is that you should be on that firmware before flashing viper.
3. The 2.6.605.10 firmware is official, but prerelease, and it is very likely not the final version that will be released when the FOTA is pushed out to the public. You can just flash the firmware of the final release version when that is released, so you don't need to worry about being ahead/behind the release version.
4. On ViperOneM9, there is no reason to do a full wipe unless you are coming from another ROM. If you read the thread, you will see that the developers and most of the people around there haven't done a clean flash since their first flash of viper. Make a backup before flashing, and you can always revert to that if you have an issue when you dirty flash.
5. 3.0.0 is working great. No reason not to update.
Click to expand...
Click to collapse
Came in a bit late to the m9 threads. Is the losing VOLTE thing still a thing or was that earlier builds and firmwares? My phone is attached to my work account so it's big pain to talk with actual verizon and i've been hesitant on flashing roms. Not asking for gaurantees, i get the risk, just wondering if that is still going on.

teckels said:
Came in a bit late to the m9 threads. Is the losing VOLTE thing still a thing or was that earlier builds and firmwares? My phone is attached to my work account so it's big pain to talk with actual verizon and i've been hesitant on flashing roms. Not asking for gaurantees, i get the risk, just wondering if that is still going on.
Click to expand...
Click to collapse
It's never been 100% understood why this has happened. It isn't specific to any ROM, I think someone on stock rooted ROM had this issue happen. Once you S-OFF you will be at risk, as far I am aware.

andybones said:
It's never been 100% understood why this has happened. It isn't specific to any ROM, I think someone on stock rooted ROM had this issue happen. Once you S-OFF you will be at risk, as far I am aware.
Click to expand...
Click to collapse
Is it a common thing or has it only happened to one or two people.

Tommydorns said:
Is it a common thing or has it only happened to one or two people.
Click to expand...
Click to collapse
I
Thiss I am not too sure of, but I don't think too many.

Tommydorns said:
Is it a common thing or has it only happened to one or two people.
Click to expand...
Click to collapse
Me and one or two others. I have my suspicions as to what caused it and the casual crack rom flasher likely won't fall victim to it.
Sent from my HTC6535LVW using Tapatalk

Upgrading Modem?

Hello all. I recently spent 5+ hours rooting and turning my VZW Note 4 into a "developer" phone. I've rooted a lot of phones, but this particular process had me pretty frustrated. I had several problems with the software versions I was using. Anyway, I'm curious if I should upgrade just my modem firmware to the latest included in VZW's 6.0.1 release. On my old Android devices, I used to do this with great success. Signal strenght would increase (or worsen), GPS signal would be better, etc. Is this included in ROMS and/or is it safe to do this?

Oh man,lol don't tell me that. I just bought a note 4 off swappa and it'll be here wendsday probably. I have been wanting a note 4 for along time. Only reason why I never got it was because of root and BL being locked down. Now that there is custom roms & kernels I bought it and can't wait to get it. Is it really that bad to Root and BL unlock? If it took you that long it'll take me days because I work 12hr job 7 days a week. I'm just trying to find all the necessary files I need to download now that way that will be done with.
Sent from my VS990 using Tapatalk

av00va said:
Hello all. I recently spent 5+ hours rooting and turning my VZW Note 4 into a "developer" phone. I've rooted a lot of phones, but this particular process had me pretty frustrated. I had several problems with the software versions I was using. Anyway, I'm curious if I should upgrade just my modem firmware to the latest included in VZW's 6.0.1 release. On my old Android devices, I used to do this with great success. Signal strenght would increase (or worsen), GPS signal would be better, etc. Is this included in ROMS and/or is it safe to do this?
Click to expand...
Click to collapse
Look in @hsbadr's Jasmine ROM thread. There's a partial firmware to flash that will update both the bootloader and the modem to PF3, which is the latest and greatest. It's required if you want to use Jasmine 7.0 or @chevyrhoad's Grace 7 ROMs.

mwebb34 said:
Oh man,lol don't tell me that. I just bought a note 4 off swappa and it'll be here wendsday probably. I have been wanting a note 4 for along time. Only reason why I never got it was because of root and BL being locked down. Now that there is custom roms & kernels I bought it and can't wait to get it. Is it really that bad to Root and BL unlock? If it took you that long it'll take me days because I work 12hr job 7 days a week. I'm just trying to find all the necessary files I need to download now that way that will be done with.
Sent from my VS990 using Tapatalk
Click to expand...
Click to collapse
It's a matter of being familiar with the tools. The process is pretty rudimentary. If you have a knowledge of linux and/or abd you'll be fine. I had trouble when my phone decided to start boot looping. Turns out it skipped my mind to wipe the cache/data clean after a stock odin flash. After all is said and done, the process is fairly simple. Also, King Root is a big issue. If you dump a fresh ROM from odin onto your device, install King Root, and attempt to root it it will root successfully everytime, the first time. On some other ROMs it can give you a considerable amount of trouble. I recommend resetting your lollipop to defaults, rooting it, flashing to the 5.1.1/6.0.1 hybrid, rooting again, and then continue about your business. There's a certain set of steps that makes this process painless which you can only ascertain if you have done it.

douger1957 said:
Look in @hsbadr's Jasmine ROM thread. There's a partial firmware to flash that will update both the bootloader and the modem to PF3, which is the latest and greatest. It's required if you want to use Jasmine 7.0 or @chevyrhoad's Grace 7 ROMs.
Click to expand...
Click to collapse
Can I flash "N910VVRU2CPF3_PartialFirmware_PatechedKernel.tar.md5" from his thread overtop of my TRWM and CM 13 ROM? I have both installed, and I'm wondering if I can just boot into the bootloader and odin this to the phone. CM 13 supports it, so why not? I'm just worried about it a kernel malfunction.

av00va said:
It's a matter of being familiar with the tools. The process is pretty rudimentary. If you have a knowledge of linux and/or abd you'll be fine. I had trouble when my phone decided to start boot looping. Turns out it skipped my mind to wipe the cache/data clean after a stock odin flash. After all is said and done, the process is fairly simple. Also, King Root is a big issue. If you dump a fresh ROM from odin onto your device, install King Root, and attempt to root it it will root successfully everytime, the first time. On some other ROMs it can give you a considerable amount of trouble. I recommend resetting your lollipop to defaults, rooting it, flashing to the 5.1.1/6.0.1 hybrid, rooting again, and then continue about your business. There's a certain set of steps that makes this process painless which you can only ascertain if you have done it.
Click to expand...
Click to collapse
I will absolutely take you're advice on this and apply it as soon as I get my note 4. Should be receiving it in about 3 or 4 days.
Sent from my VS990 using Tapatalk

av00va said:
Can I flash "N910VVRU2CPF3_PartialFirmware_PatechedKernel.tar.md5" from his thread overtop of my TRWM and CM 13 ROM? I have both installed, and I'm wondering if I can just boot into the bootloader and odin this to the phone. CM 13 supports it, so why not? I'm just worried about it a kernel malfunction.
Click to expand...
Click to collapse
To the best of my knowledge, it does nothing to the kernel. All it does is upgrade the modem.

Hi guys.Your Suggestion is very much appreciated. (Updating to Nougat before anythin)

Hi there Guys. GoodDay. I just wanna ask. I recently bought Nexus 5x. And i see nougat is ready for update. But before that Ive found out on internet that some users that updated from MM to Nougat got stuck on bootloop and seems they cant figured it out i dont know if its model related(h791/h798). Google Employee says hardware. Here 's a qoute of a report. from androidauthority website.
"We’ve been hearing an increasing number of reports from Nexus 5X owners about bootloop issues after upgrading to Android 7.0 Nougat.
Many folks have been claiming that, after installing the Android 7.0 Nougat OTA, their Nexus 5X devices would unexpectedly crash and begin to randomly reboot after a few hours, or even days, of use. Some users say downgrading to Android 6.0 Marshmallow does the trick, while others say reflashing the Android 7.0 Nougat September update fixes the problem. Most people, unfortunately, have yet to find a good fix for the problem.
So if you run into this issue, what should you do?
Orrin, a Google employee, had this to say in the Nexus Help Forums:
We understand that a very small number of users are experiencing a bootloop issue on the Nexus 5X. We are continuing to investigate the situation, but can confirm that this is strictly a hardware related issue. For those of you that are currently experiencing this, please contact your place of purchase for warranty or repair options.
We’re sorry for the inconvenience and appreciate your continued patience."
Im afraid that if i update via OTA just like them. chances it might or might not happen to me. and if did, can a tool like Wugfresh' NRT save it? or should i root and manually update to nougat via some toolkit or manually, is it safer? Thank You very much for your suggestions.
BtW: im on
LG H791 Android 6.0
Build MDA89E
Security Patch Oct.1,2015

ryuhagaming said:
Hi there Guys. GoodDay. I just wanna ask. I recently bought Nexus 5x. And i see nougat is ready for update. But before that Ive found out on internet that some users that updated from MM to Nougat got stuck on bootloop and seems they cant figured it out i dont know if its model related(h791/h798). Google Employee says hardware. Here 's a qoute of a report. from androidauthority website.
"We’ve been hearing an increasing number of reports from Nexus 5X owners about bootloop issues after upgrading to Android 7.0 Nougat.
Many folks have been claiming that, after installing the Android 7.0 Nougat OTA, their Nexus 5X devices would unexpectedly crash and begin to randomly reboot after a few hours, or even days, of use. Some users say downgrading to Android 6.0 Marshmallow does the trick, while others say reflashing the Android 7.0 Nougat September update fixes the problem. Most people, unfortunately, have yet to find a good fix for the problem.
So if you run into this issue, what should you do?
Orrin, a Google employee, had this to say in the Nexus Help Forums:
We understand that a very small number of users are experiencing a bootloop issue on the Nexus 5X. We are continuing to investigate the situation, but can confirm that this is strictly a hardware related issue. For those of you that are currently experiencing this, please contact your place of purchase for warranty or repair options.
We’re sorry for the inconvenience and appreciate your continued patience."
Im afraid that if i update via OTA just like them. chances it might or might not happen to me. and if did, can a tool like Wugfresh' NRT save it? or should i root and manually update to nougat via some toolkit or manually, is it safer? Thank You very much for your suggestions.
BtW: im on
LG H791 Android 6.0
Build MDA89E
Security Patch Oct.1,2015
Click to expand...
Click to collapse
Wouldn't you rather it boot loop now then later when it's no longer covered under warranty?
Boot loop is a hardware issue that becomes exposed during the install process. You gain nothing by waiting and the same thing could be triggered every time the device is rebooted.
Sent from my Nexus 5X using XDA-Developers mobile app

Did you update? I'm in the exact same situation, afraid to update because I just got my phone from amazon and it's running Marshmallow...same model as yours. H791 I don't know if I even have a warranty for it

I suggest you update because it is possible that you might not have that hardware issue, I bought mine a month back and hadn't read any forums or anywhere online about the bootloop. I updated right when I got the phone to android 7.0 xD and my phone has been fine since.

sickofusernames said:
Did you update? I'm in the exact same situation, afraid to update because I just got my phone from amazon and it's running Marshmallow...same model as yours. H791 I don't know if I even have a warranty for it
Click to expand...
Click to collapse
Yeah, ive managed to successfully update it to nougat including the latest build 7.0.1. i think there is just some certain phone that are affected. just see to it that your bootloader is unlock before you update. just in case, you can still go to your recovery.

X3NOM said:
I suggest you update because it is possible that you might not have that hardware issue, I bought mine a month back and hadn't read any forums or anywhere online about the bootloop. I updated right when I got the phone to android 7.0 xD and my phone has been fine since.
Click to expand...
Click to collapse
wow. that's nice :good:

ryuhagaming said:
Yeah, ive managed to successfully update it to nougat including the latest build 7.0.1. i think there is just some certain phone that are affected. just see to it that your bootloader is unlock before you update. just in case, you can still go to your recovery.
Click to expand...
Click to collapse
Thanks for the reply, it gave me the courage to just do it! So far so good, no issues