Related
I tried to patch my phone with CM9-ICS-MR0-111207-jordan-KERNEL-2.3.4-Quarx build and when I rebooted I get this
bootloader
09.10
err:A5,70,00,00,23
battery ok
ok to program
connect USB
data cable
Now I have googled this and found many options.
So far I have tried these.
droidforums.net/forum/droid-x-hacks/68222-unbricking-your-droid-x.html
When I do this I get a error (in linux ATM so cant tell you the name will get it ASAP) and I have got rsd lite 5.7 and the latest drivers from the motorola site. I have tried many roms and placed it in C:, My documents, in the RSD folder, on the desktop, in the download folder. Always open the program in admin.
Also this:
droidxforums.com/forum/droid-x-sbf/23638-linux-solution-your-windows-rsd-lite-problems.html
I have tried many of there ISO images and all boot and say they start to do something, then it says failed! rebooting and then it reboots and says to remove battery and go into these option (which I cant as it will only boot on the boot loader screen I tried to get into recovery and no luck) so it was a fail also.
I hope there is a solution as this is a pain, I may of put a to high rom on and cant revert back??
I am sick of googling and alot of the links come back to this site and have tried many but all seem to be repetitive and what I have tried.
Thanks in advance
Ok Fixed this site is the best!!! All I done was read the all in one beginners guide and it linked to a rom for the defy plus (all the other defy plus ones I found where folders not RSD files like this one)
So loaded the file into rsd lite and sure enough it went threw.
YAY! I cant believe I recovered my phone! I knew it was something but to find the right image was the trick I guess.
I did install the defy + CM9 image but I am not sure what happened there.
Thanks to all (more so walter79 for the image)
Hope this helps some one out in the future
Ok I got the phone to work with the image posted in the defy + section but when I boot I get no service.
I have tried to do a factory reset and had to input all the accounts again but that did not help.
what can I do?
kelbygreen said:
Ok I got the phone to work with the image posted in the defy + section but when I boot I get no service.
I have tried to do a factory reset and had to input all the accounts again but that did not help.
what can I do?
Click to expand...
Click to collapse
Get the baseband switcher app It changes the network related files to the ones correct for your country/network! You need to set it manually, though, so, it may take a couple of tries to figure out which one is the best choice
http://forum.xda-developers.com/showthread.php?t=1052745
thank you heaps it had telstra in the settings selected it and looks like I have service now. Thank you so much I cant belive I was just about to give up and get a new phone now I have a working phone with 2.3.6 and rooted now I got the network to work again . Super happy, now to see what I was missing out on since I have been pulling my hair out the last few days thinking I got a bricked phone.
kelbygreen said:
Ok Fixed this site is the best!!! All I done was read the all in one beginners guide and it linked to a rom for the defy plus (all the other defy plus ones I found where folders not RSD files like this one)
So loaded the file into rsd lite and sure enough it went threw.
YAY! I cant believe I recovered my phone! I knew it was something but to find the right image was the trick I guess.
I did install the defy + CM9 image but I am not sure what happened there.
Thanks to all (more so walter79 for the image)
Hope this helps some one out in the future
Click to expand...
Click to collapse
Do you have a link for the beginners guide?
ryangus said:
Do you have a link for the beginners guide?
Click to expand...
Click to collapse
[GUIDE] All-in-One Defy Beginner's guide
i rooted my device but some games wont play like need for speed and asphalt 7 so i installd and its the last thing i did on my device (chainfire3d) then my device reboot and keep reboot wont open help please wait for answer
Sounds like this is a very similar problem to something someone else posted in the last few days. Take a look through the last couple of days posts in this forum and see if you can see it. The general suggestion if i remember right was to use ODIN to fix.
wisewood said:
Sounds like this is a very similar problem to something someone else posted in the last few days. Take a look through the last couple of days posts in this forum and see if you can see it. The general suggestion if i remember right was to use ODIN to fix.
Click to expand...
Click to collapse
can u show me the link i still searching for now and the only solution i found is change my stock ROM and i wont do that wanna get my official updates i think that's better
wanna know what to do by Odin to fix my device and in the same time keep my official system
i seen other problem got the same name but i mean my device wont open just galaxy note ii welcome screen and keep it my device wooont open any one help please what to do by odin ??????
no one answer developers forums xD
thanks will leave google helps more
Read before you install, chain fire 3d does not work with jellybean 4.1.
I think the description in the play store also said enough
Amazes me why people dont read ?
It clrearly says not for jelly bean
You need to find your desired stock rom and flash it via odin. Only solution
Why do you install things which aren't supported?
It's the first thing people should do when installing unconfirmed stuff.
Chainfire 3D isn't supported for JB.
What you need to do now is go into DOWNLOAD mode, and flash your stock ROM via Odin, if you want official.
thanks all its my mistake am new , and i said sorry for my note lmao , well now i need to search for good custom room
i download nandroid and platinum backup and i backup my apps&system wz data got .gz files i think on my sd-card and got nandroid backup on my sd-card (nandroid back up like 4 files) one of them .md5 and its 1kb others .tar 500mb and 700mb cach and system and est i think didnt remember they are on my sd-card is that help me by odin ? because i cant open my device any way my only solution by odin mode but is there any file in my back up files can help ? forget i tried to restore my device by nandroid.md5 and odin closed not response , dont say iam lucky new in android world understand nothing for now
You don't need to flash custom ROM, bro. If you want official rom, just go to sammobile.com, find the firmware of your country and flash it through odin. There, you have official stock ROM again.
Also your English is extremely hard to understand. Try to use commas and full-stops.
Ok so i bought a phone from a guy on craigslist a couple months ago and everything was fine its a sprint lg g2 that was running a tmobile rom he said never had an issue with it.. today i was working on my motorcycle and i must have hit system update in my pocket :/ well i have been trying to fix this phone for about 8 hrs now and im not having much luck.. first i tried to flash a new rom but couldnt get the drivers to be recognized by any computer i tried.. so i resorted to the flash tool and thinking i had a sprint g2 i downloaded the stock sprint .tot and dll. files the flash tool thinks my phone is a d801at so i downloaded the appropriate files and flashed again and it worked flawlessly i thought now the phone just force shuts down and reboots and if you lock the screen it reboots i have tried flashing it again and again and also preforming a factory reset from the phone im lost and dont know what to do if you could lead me to water i will drink lol but im lost and dont even know where to begin please help as i need my phone
someone please help...
if the build.prop was edited to make it think it was a different phone other then the sprint lg g2, you would have to fix the build.prop then re use the flash tool and tot it back to sprint stuff. You may have to flash a zip in recovery (if you have custom recovery), to fix the build prop. Make sure you have the latest drivers installed on the computer and try different usb ports and cords as well if the drivers aren't installing.
jcwxguy said:
if the build.prop was edited to make it think it was a different phone other then the sprint lg g2, you would have to fix the build.prop then re use the flash tool and tot it back to sprint stuff. You may have to flash a zip in recovery (if you have custom recovery), to fix the build prop. Make sure you have the latest drivers installed on the computer and try different usb ports and cords as well if the drivers aren't installing.
Click to expand...
Click to collapse
I have the drivers installed now i dont really know how to edit the build prop but could probably figure it out but the problem is i dont have a custom recovery and I only have a maximum of 45 sec to root and install one lol If i press to many buttons on my phone it reboots or says error
brickedg2 said:
I have the drivers installed now i dont really know how to edit the build prop but could probably figure it out but the problem is i dont have a custom recovery and I only have a maximum of 45 sec to root and install one lol If i press to many buttons on my phone it reboots or says error
Click to expand...
Click to collapse
Post your issue on this thread. XxZombiePikachu is real helpful there. http://forum.xda-developers.com/showthread.php?t=2692223
Sent from my XDABBEB VS98024A v1.2.1 using XDA free mobile app
You had a Rom called "Justin's Rom" on it. Many people had this issue. Take your SIM card out, go back to stock using the flash tool, root with auto rec, then flash cloudystock.it works for tmobile out of the box.
http://forum.xda-developers.com/showthread.php?t=2661866
Also read my post
http://forum.xda-developers.com/showthread.php?t=2729370
I have been searching the forum and google and have been unable to reach a solution yet.
I am not a noob, but i am not an expert either so use small words ha.
I have a Samsung Galaxy Tab 3 10.1 5210 with the most recent OTA update.
Last night I attempted to root my device using this:
androidxda (DOT) com/root-samsung-galaxy-tab-3-10-1-gt-p5210
It claimed successful and my device started to reboot and hung up at the Samsung GALAXY TAB 3 screen. I am unable to get to recovery mode on the device. Only able to go to download mode. I have tried several options but have been unable to find a way to flash it successfully. The flashes i have tried downloading were all in .zip and that obviously isn't able to be used in Odin. I have researched how to convert the files into a .tar but I don't have linux. Can someone please help me because I need my tablet. I know it can be saved but I can't seem to locate the answers. I am also getting concerned that it is unable to charge the battery being in the condition it is in now so I am trying to conserve the battery on the tablet until it is absolutely needed. Thanks.
cameron72 said:
I have been searching the forum and google and have been unable to reach a solution yet.
I am not a noob, but i am not an expert either so use small words ha.
I have a Samsung Galaxy Tab 3 10.1 5210 with the most recent OTA update.
Last night I attempted to root my device using this:
androidxda (DOT) com/root-samsung-galaxy-tab-3-10-1-gt-p5210
It claimed successful and my device started to reboot and hung up at the Samsung GALAXY TAB 3 screen. I am unable to get to recovery mode on the device. Only able to go to download mode. I have tried several options but have been unable to find a way to flash it successfully. The flashes i have tried downloading were all in .zip and that obviously isn't able to be used in Odin. I have researched how to convert the files into a .tar but I don't have linux. Can someone please help me because I need my tablet. I know it can be saved but I can't seem to locate the answers. I am also getting concerned that it is unable to charge the battery being in the condition it is in now so I am trying to conserve the battery on the tablet until it is absolutely needed. Thanks.
Click to expand...
Click to collapse
First of all - Welcome to xda
Your tab is soft bricked, something has gone wrong with your system files... Honestly it seems like you know enough to get it done, but are struggling a bit with the file formats. You are correct in saying that Odin won't use zip files, but you shouldn't have to convert anything to tar or download linux! If you extract the zip files, you should find a .tar or .tar.md5 file (inside the zip file) that Odin can use, put it in the PDA mode box, etc etc... If your downloads don't have the correct files inside them, try THIS thread.
Let me know if you get it sorted :good:
bob23bk said:
First of all - Welcome to xda
Your tab is soft bricked, something has gone wrong with your system files... Honestly it seems like you know enough to get it done, but are struggling a bit with the file formats. You are correct in saying that Odin won't use zip files, but you shouldn't have to convert anything to tar or download linux! If you extract the zip files, you should find a .tar or .tar.md5 file (inside the zip file) that Odin can use, put it in the PDA mode box, etc etc... If your downloads don't have the correct files inside them, try THIS thread.
Let me know if you get it sorted :good:
Click to expand...
Click to collapse
I had already tried the method and file in the forum you linked me to. It failed almost instantly. That's when I turned everything off and tossed it all to the back seat of my work truck before it got thrown at the windshield. I keep seeing people saying they have trwp or whatever. I don't even know what that is haven't researched that. Is it something i need as well?
I've never successfully rooted a Samsung device. I used to do this stuff a lot back with the droid x with Linux and everything was pretty simple. Does Samsung change their bootloader with each update like Motorola did then? I was wondering that when trying to install a firmware of a previous version that maybe that was the problem.
All I wanted root for was to just tweak some things and be happy. It has turned into a nightmare.
C,
hi,
the consistent/common thread of this problem is/seems to be taking the ota and trying unverified/gimmicky
root methods.
there are recoveries for the gt-p52xx in the tab 10.1 forum
the majority of samsung devices root as follows;
if a custom recovery exist, flash it.
then download recent or latest version of chainfire's supersu update zip, reboot to recovery
backup your rom first, then flash supersu, if everything goes well, once you have set up your stock rom with root in place
make a new backup.
samsung ota's are death incarnate, reject them.
goto the tab 10 forum and get busy ! you said it yourself, you're not a noob, you know the drill. :good:
m
moonbutt74 said:
C,
hi,
the consistent/common thread of this problem is/seems to be taking the ota and trying unverified/gimmicky
root methods.
there are recoveries for the gt-p52xx in the tab 10.1 forum
the majority of samsung devices root as follows;
if a custom recovery exist, flash it.
then download recent or latest version of chainfire's supersu update zip, reboot to recovery
backup your rom first, then flash supersu, if everything goes well, once you have set up your stock rom with root in place
make a new backup.
samsung ota's are death incarnate, reject them.
goto the tab 10 forum and get busy ! you said it yourself, you're not a noob, you know the drill. :good:
m
Click to expand...
Click to collapse
I have tried the recoveries in the forum and it failed seconds after starting.
I don't do this stuff regularly as I don't hardly have the time. I haven't done anything of this nature in years so I'm well out of the loop on things..
cameron72 said:
I have tried the recoveries in the forum and it failed seconds after starting.
I don't do this stuff regularly as I don't hardly have the time. I haven't done anything of this nature in years so I'm well out of the loop on things..
Click to expand...
Click to collapse
okay, hmm, when you say it fails, do you mean odin fails to flash and if so what is the reason/ouput ?
or do you mean that you are now in a recovery bootloop ?
note- though i go the full route of packing recovery.img's for odin flashing, the md5 checksum always seems to
come up as invalid, the working "remedy" is to remove the .md5 extension from the "odin-flashable-recovery".tar.md5 file
by renaming the file to "odin-flashable-recovery".tar
odin will no longer attempt the checksum verification but the recovery file will flash.
make sure you have samsung-usb-drivers for windows installed. on the main page of my devhost archive [link is in my signature]
you will find the tools you need. the possible problem is that the ota you installed may have overwritten your bootloader, for that i don't
have a reliable fix, so if anything make sure you also have the stock recovery ready to go as well as supersu update zip
already downloaded onto your device for rooting.
after you flash the custom recovery [with auto-restart in odin disabled] run the flash and wait for the res-ok message, give it another second or two then disconnect the tab and force reboot to recovery, home,vol-up and power, once in recovery make a full backup, then flash supersu zip and reboot, if you do go into recovery loop, force reboot to odin mode, home,vol-down and power, follow the on screen instruction, now reconnect your tab to pc and use odin to flash back stock recovery.
m
Okay guys I appreciate the help. I finally got it. I tried the method on Zachisimo's post on unbricking and finally got it installed.
After it installed, it left me with a bootloop and I was actually able to go into recovery mode this time and do a factory data reset and wipe cache then everything went well. I am a happy dude now.
Going to attempt rooting it again and does anyone have any suggestions on what ROM to install? I have never used any custom ROM's before so that is a new area for me. Feeling more confident knowing how to save it from the dead. :good::good::good:
cameron72 said:
Okay guys I appreciate the help. I finally got it. I tried the method on Zachisimo's post on unbricking and finally got it installed.
After it installed, it left me with a bootloop and I was actually able to go into recovery mode this time and do a factory data reset and wipe cache then everything went well. I am a happy dude now.
Going to attempt rooting it again and does anyone have any suggestions on what ROM to install? I have never used any custom ROM's before so that is a new area for me. Feeling more confident knowing how to save it from the dead. :good::good::good:
Click to expand...
Click to collapse
Hi,
Alright !'m glad you got it working, as to roms , all available roms currently are stock modifications , I use cag-rom, there's also pimp-droid
both kitkat.
m
moonbutt74 said:
Hi,
Alright !'m glad you got it working, as to roms , all available roms currently are stock modifications , I use cag-rom, there's also pimp-droid
both kitkat.
m
Click to expand...
Click to collapse
If you use it then thats what i shall try. First i gotta find a root, then I have seen many people recommend philz recovery, and then the rom?
question why does Restl3ss say wait 10minutes after installing a rom before doing anything?
cameron72 said:
If you use it then thats what i shall try. First i gotta find a root, then I have seen many people recommend philz recovery, and then the rom?
question why does Restl3ss say wait 10minutes after installing a rom before doing anything?
Click to expand...
Click to collapse
for root look up supersu update zip
ask Restl3ss :silly:
m
cameron72 said:
Okay guys I appreciate the help. I finally got it. I tried the method on Zachisimo's post on unbricking and finally got it installed.
After it installed, it left me with a bootloop and I was actually able to go into recovery mode this time and do a factory data reset and wipe cache then everything went well. I am a happy dude now.
Going to attempt rooting it again and does anyone have any suggestions on what ROM to install? I have never used any custom ROM's before so that is a new area for me. Feeling more confident knowing how to save it from the dead. :good::good::good:
Click to expand...
Click to collapse
Glad it worked out, recovering from brick does set you free from the stress induced by the disclaimers imo :silly:
Didn't know where to post this exactly, to be honest. This will be a long post
I was flashing AOSP roms in the phone. Tried to go back to One UI for the VoLTE thing
In one of the AOSP roms I couldn't install it in Lineage Recovery (older version of the rom thing). I saw i one post that doing an ADB Sideload in TWRP could solve the flashing problem. Did that. No issues
Wanted to test another AOSP rom but didn't boot (bootloop), so then I tried to go back to One UI. Don't remember if I did a format data in that moment.
After installing the rom and reboot to system, the phone doesn't even show the splash screen.
But tried to go to download mode and it went there, so the phone is still alive
Tried also going to recovery and it boots there (just to recovery and download mode)
I tried everything I could:
Flashed another custom ROM without success
Flashed other AOSP roms again
Changed the recovery (Lineage, TWRP and Stock tested)
Flashed the stock firmware through Odin several times
Tried to do a re-partition in Odin
Did several factory resets
Nothing seems to work. The weird thing is that, with any rom that I try to install, it tells that is installed, but when I go to the file manager in TWRP, it doesn't install anything. The free space before the installation is the same as after it. I don't know what else I can do. I just have the hope because the phone starts in BL and recovery
Anyone have any idea of what can I do to solve this? Or if there is a way to install the OS outside Odin or recovery (or ADB)
Tried with fastboot (Lineage Recovery) with several commands, and I think I found the issue. The system partition got corrupted. Need to know how to repair it (tried already with the repair option in TWRP)
Any help with this?
https://forum.xda-developers.com/t/...sh-stock-firmware-in-samsung-devices.4452839/
Read it carefully ( retrieve the original PIT file part)
Let me test it and will give feedback
lngl said:
https://forum.xda-developers.com/t/...sh-stock-firmware-in-samsung-devices.4452839/
Read it carefully ( retrieve the original PIT file part)
Click to expand...
Click to collapse
Didn't work out. Same issue
It's so stressful because it boots to the other things, but not to the system
Good afternoon faithful and unfaithful
Unfaithful Redspikejr
The barbarian from Pakonan has no idea about this but in your case he would do the following since I have had your problems and it was resolved positively.
I'm going to try to help you, I don't know English and I use a translator, I hope it's good to understand each other. Luck
First option
1 I want you to put through odin in AP twrp-3.6.0_9-2-d2s_official_jan22.tar unchecking auto reboot
2 in twrp delete data and say YES restart in twrp again and try to install PixelExperience_d2s-12.1-20220522-1749-OFFICIAL. I understand you will have it on the SD, if not, put the ROM on a USB key and try to install it in TWRP.
If you manage to install it, then install magisk apk and restart the system.
3 once started install magisk apk and ready.
Second option
1 I want you to put through odin in AP twrp-3.6.0_9-2-d2s_official_jan22.tar unchecking auto reboot
2 in twrp delete data and say YES reboot in twrp again and install the Recovery lineage.img and reboot in Recovery lineage and Factory reset & reset system partitions
3 Install the PixelExperience_d2s-12.1-20220522-1749-OFFICIAL. I understand you will have it on the SD, if not, put the ROM on a USB key and install from there. turn off the phone and
4 in download mode odin AP twrp-3.6.0_9-2-d2s_official_jan22.tar unchecking auto reboot reboot into TWRP
5 Install Magisk apk and reboot system.
once started install magisk apk and ready.
remember to have the cable plugged in to enter TWRP and download while you are following the steps. Good luck, you will say.
Salu2 of your most faithful infidel Pako
To update the situation
The battery of the phone in inflated like a balloon. I don't know for sure if that was caused by something physical, but will update when have some news
i still have the same problem and still hunger for a solution because i just bought it .. Been running quite a few firmwares now. and bootloaders and kernels and recoverys so far... but whats funny is in pixel recovery it said i had a "d2x" model which is SM-N976 model with 5G... But every elsewhere it says d2s which is note10+. Odin also says SM-N975F model... But anyways... I really really hope someone finds a solution. Because im stuck as hell...
I also made a thread my self
Partly bricked... SM-N975F
Hey guys.. Ive been a visitor in XDA forums for quite a while... And i been running root and custom FW with more or less every samsung from S2 and up... But i just got my self a note10+ (atleast thats what ive been told) and i wanted to root it...
forum.xda-developers.com
And i think its VBMETA problem. BUT i dont have any experience on that term...
Crossing fingers still...
I might have found a solution
Holy Hell, Im am so glad im not the only one that this is happened to. I will be more happy when we find a solution. I have put myself (device) in some questionable states but this has been a first and strange one for me . Its like being so close to booting into system then nothing.
AmercianPM said:
Holy Hell, Im am so glad im not the only one that this is happened to. I will be more happy when we find a solution. I have put myself (device) in some questionable states but this has been a first and strange one for me . Its like being so close to booting into system then nothing.
Click to expand...
Click to collapse
Android Verified Boot 2.0
I found this link this morning. Im sure this is the culprit.
I experienced today something like you. It did not let me flash even stock firmware. But I succeeded to get out. I flased via ODIN BL slot from Dr.Ketan and in AP slot TWRP and nothing else. And I managed to enter the TWRP recovery and from there I restored previous backup.
I will try to do a multipost due to more threads and problems which are the same...
But this is the solution...
In my folder on the picture you will see 2 files i marked with green color...
Use the file and burn it according to your current setup. Odin or custom recovery.
And the problem will be solved. Used 14 days and countless of hours to get out of this boot loop!
So im finally happy to see the boot up screen without pressing into download mode or recovery mode...
The folder on the picture is to be found on this forum... Just cant remember from which thread exackly
GL
Titanity said:
View attachment 5656047
I will try to do a multipost due to more threads and problems which are the same...
But this is the solution...
In my folder on the picture you will see 2 files i marked with green color...
Use the file and burn it according to your current setup. Odin or custom recovery.
And the problem will be solved. Used 14 days and countless of hours to get out of this boot loop!
So im finally happy to see the boot up screen without pressing into download mode or recovery mode...
The folder on the picture is to be found on this forum... Just cant remember from which thread exackly
GL
Click to expand...
Click to collapse
Bless you. My poor phone was down since 6-20. I was just kicking myself in the ass the other day saying if I got my phone to boot again i would never flash **** it on it ever again... @Titanity thank you so much for making me look like a liar. Now lets see what else we can do lol.
So you got it to work? And whats up next?
Titanity said:
So you got it to work? And whats up next?
Click to expand...
Click to collapse
Yes it did. I have gotten myself in some pretty bleak spots in the past and have been able to resolve all my issues on my own research, troubleshooting, trial and error etc. but I had never had a device that was actually able to power on, flash twrp, stockfirmware pass in odin, tried all type of pit file patches, adb and fastboot commands and still not be able to get into OS completely stumped me and I had exhausted so much time on it that i came to the conclusion that one of the talented members of XDA would for sure come up with a solution and I was right.
Sorry for the blabber, Ive been just a watcher of this site for many years and have never had to engage so my apologies for my forum etiquette.
I main focus now is to find a good rom to run with nethunter. I was running Dr. ketan Rom with nethunter while installing every LSposed Module that sounded cool and was beyond impressed by how stable my device still performed (one of my largest TWRP backups was 49Gb btw.) So yea, look for something with a strong kernal, light rom to see what I like. I have yet to try the new roms out due to unfamiliar processes of installing outside of Odin. Its been a while since I had some free time tinker in this space again.
Yea im just a watcher my self... it took me a few days until i decided to make this solution. Because i do think it was a important solution i found. But yes im just a watcher my self...
Now im stuck again though because i have a faulty usb-c, so its claming theres water inthe entrance which there isnt. And i been looking all over the forums for a solution like 3 times now. And people are just trying to trick the fault or acturally have a solution... But thats only IF they have water inside and the stupid alarm goes off...
Instead i need a solution to disable it now that its rooted. So need to know exackly what to look for and theres no help to get here. So kinda stuck... Irritating because i just wanna use it for dex... And not dex wiesless because its lagging on the mouse and what not... So my adapter need the recharge entrance and ... doh! Long journey so far... And its far from ended...
But im very happy it worked out for you... Keep in touch if you need another silly question. Then i might have silly questions for you aswell Good day my friend
@Titanity Bless your heart, I need your help . I broke my friends phone which is a note 10 plus, and all that you guys mentioned about trying everything I did as well.. I read your solution but I dont know where to find the files you marked and how to go about them exactly... the phone is currently on stock recovery and is stuck there.
Okay do you have a option to use a mic and the software discord? i do belive its easier for both of us if we can do this with direct communication. If you dont want to use / have a mic. Then its also fine. Discord got a chat aswell so dont be shy I have my own discord which is:
Join the thetitanity @ twitch.tv Discord Server!
Check out the thetitanity @ twitch.tv community on Discord - hang outwith 17 other members and enjoy free voice and text chat.
discord.gg
Ill pop op now and then, but im not a streamer anymore on twitch. So dont be mistaken by the server info...
Look forward to see you on there. And ill make sure to have the files ready for you
Until then haha
EDIT: I just uploaded a package filled with "i help you in case of emergency" files. Make sure to download it before entering discord. Get it at...
https://easyupload.io/xwlk0w - and the PW is: titanity (30 days avalible)
Also have info ready like: is the model a 975F or? what firmware is on it at the moment. Is the bootloader unlocked. But also things like do you ever used TWRP before and know how to use it etc?
Its a package filled with files of my choice, but made by people from the forum. So no credit goes to me but them...
Have in mind that all the time i been on the forum i always just read the forum and downloaded when needed, so its the first time im trying to help others... But im optimistic!
Titanity said:
Okay do you have a option to use a mic and the software discord? i do belive its easier for both of us if we can do this with direct communication. If you dont want to use / have a mic. Then its also fine. Discord got a chat aswell so dont be shy I have my own discord which is:
Join the thetitanity @ twitch.tv Discord Server!
Check out the thetitanity @ twitch.tv community on Discord - hang outwith 17 other members and enjoy free voice and text chat.
discord.gg
Ill pop op now and then, but im not a streamer anymore on twitch. So dont be mistaken by the server info...
Look forward to see you on there. And ill make sure to have the files ready for you
Until then haha
EDIT: I just uploaded a package filled with "i help you in case of emergency" files. Make sure to download it before entering discord. Get it at...
https://easyupload.io/xwlk0w - and the PW is: titanity (30 days avalible)
Also have info ready like: is the model a 975F or? what firmware is on it at the moment. Is the bootloader unlocked. But also things like do you ever used TWRP before and know how to use it etc?
Its a package filled with files of my choice, but made by people from the forum. So no credit goes to me but them...
Have in mind that all the time i been on the forum i always just read the forum and downloaded when needed, so its the first time im trying to help others... But im optimistic!
Click to expand...
Click to collapse
@Titanity bro that's so generous of you, alright.. downloading and will join discord then , Thanks dude