Develop Bugs

Motorola Defy Mini XT320 all-in-one script

Motorola Defy Mini XT320/XT321 all-in-one script/utility
I've ported mattlgroff's DROIDRAZR all-in-one Script to the Motorola Defy Mini XT320/XT321. This will make life easier and it will do it for you.
Make sure you have fastboot mode if not please refer to this guide for fastboot but there is a fastboot checker in option 6 but it won't install fastboot for you.
Link: http://forum.xda-developers.com/showpost.php?p=36199694&postcount=3
Options available:
1. Root your Motorola Defy Mini XT320/XT321
2. Install 2nd-init/TWRP Recovery
3. Overclock installation
4. Unroot Device
5. Wipe Data/Factory Reset
6. Fastboot checker.
7. Exit Utility
Instructions:
NEW PACKAGE & instructions
1. Download the EXE file at http://www.mediafire.com/?c81fnrtrki65e9i
2. Double click on the exe.
3. Choose an option by entering a number from 1 to 7
OLD PACKAGE & instructions
1. Download package at [REMOVED OLD LINK]
Please Download the fixed package at http://www.mediafire.com/?krxtemrthsz5ier
EXE Version: http://www.mediafire.com/?0kwmx4whjj1ua8c
2. Extract the zip file making sure all the files are in the same place.
3. Click on the batch file named 'DefyMiniUtility.bat'
4. Choose an option by entering a number from 1 to 7.
Credits to:
- Bernd.Defy for overclock module and Guitwo2 for init.d script
- Guitwo2 and jkkk88 for TWRP and aweosomeabhjeet for 2nd-init
- DoOMLoRD for unroot script
- Mattlgroff for the original DROID RAZR all-in-one script
If anyone knows if I missed a member for the credits, please PM me. Thanks
Make sure press thanks if it works
Guys please don't repost it as your own work, otherwise I'll report it and you will get banned from XDA.
NOTE: If you have previously used the old EXE to install TWRP then please remove the old folders by using these instructions using cmd before using updated exe to install TWRP;
1.
Code:
adb shell
2.
Code:
su
3.
Code:
mount -o remount,rw -t yaffs2 /dev/block/mtdblock11 /system
4.
Code:
rm -R /system/bootmenu
Then use the updated exe to install TWRP.
NOTE: If you don't like TWRP, you can download Guitwo2's Permanent CWM at http://forum.xda-developers.com/attachment.php?attachmentid=1875373&d=1365682716
Temporary CWM Recovery: http://forum.xda-developers.com/attachment.php?attachmentid=1875299&d=1365680458
2nd-init does NOT work in CWM Recovery
Thanks to @Guitwo2 for CWM Recovery.
Instructions on how to install Permanent CWM Recovery:
1. Make sure stericson-busybox is installed
2. Put XT320_bootmenuV2.zip in the root of your sdcard
3. Reboot into fastboot mode by typing this command in cmd:
Code:
adb reboot bootloader
4. Then type this command in cmd:
Code:
fastboot boot recovery.img
5. Then use volume keys to navigate and power button to select option. Select install zip from sdcard, then select XT320_bootmenuV2.zip and select yes to install the zip file
6. Then reboot device by selecting reboot device now.
CWM 6 has a bug where it asks you to 'disable recovery flash' when you select reboot system now make sure you select NO or you will soft brick your device.
Changelog:
-v2 No need to mount /sdcard in CWM Recovery. Fixed TWRP installation issues.
-v2.0.1 Released an .exe version of script, to simplify installation
-v2.0.1.1 Fixed bootmenu.zip

This can install a custom recovery?

This can install a custom recovery?

Thank you
The root process worked for me. Now i can install link2sd and set up a swap partition.
I cant install TWRP and i think the reason is that the bat was having some problem to send that bootmenu.tar file to my sd card. I tried to send that file myself before starting the entire process and it didnt worked.
I took a picture of the error i'm getting . Thank you again, i was really mad about that low internal space xD

same problem... someone can fix it? please

fca.sjc said:
The root process worked for me. Now i can install link2sd and set up a swap partition.
I cant install TWRP and i think the reason is that the bat was having some problem to send that bootmenu.tar file to my sd card. I tried to send that file myself before starting the entire process and it didnt worked.
I took a picture of the error i'm getting . Thank you again, i was really mad about that low internal space xD
Click to expand...
Click to collapse
sfoot13 said:
same problem... someone can fix it? please
Click to expand...
Click to collapse
Ok, I've made a fixed script here. The error was that the sdcard is a directory so it will refuse to push files into it.
Here's the updated script below. Just put the .bat file in the same place as the other files.

Thanks
rootdefyxt320 said:
Ok, I've made a fixed script here. The error was that the sdcard is a directory so it will refuse to push files into it.
Here's the updated script below. Just put the .bat file in the same place as the other files.
Click to expand...
Click to collapse
Ty for the quickly answer.
Btw, my gsm network wasnt working after the root process. If the same thing happens to someone else, just do a master reset and it will work again.

pull command is working now
That sdcard copy part is working now. The TWRP process is still not working for me. I tried to do myself the commands using the adb interface and when i use the command to intall the tar, i got the message 'tar: no space left on device" . I hope you can help me with that and i'm sorry about all this questions xD .

fca.sjc said:
That sdcard copy part is working now. The TWRP process is still not working for me. I tried to do myself the commands using the adb interface and when i use the command to intall the tar, i got the message 'tar: no space left on device" . I hope you can help me with that and i'm sorry about all this questions xD .
Click to expand...
Click to collapse
You must have more than 5MB free in your /system partition. Please move your apps to the /flex partition or delete the useless apps in /system.

rootdefyxt320 said:
You must have more than 5MB free in your /system partition. Please move your apps to the /flex partition or delete the useless apps in /system.
Click to expand...
Click to collapse
Thank u so much to everyone who make it possible xD
(can i do now a overclock to 720 without problems?)

sfoot13 said:
Thank u so much to everyone who make it possible xD
(can i do now a overclock to 720 without problems?)
Click to expand...
Click to collapse
Yes but it sometimes gets unstable so you should overclock to 700MHz which is the highest I got without reboots. pll2_l_val=73 gives you 700MHz.

rootdefyxt320 said:
Yes but it sometimes gets unstable so you should overclock to 700MHz which is the highest I got without reboots. pll2_l_val=73 gives you 700MHz.
Click to expand...
Click to collapse
Thank u so much and TWRP doesn't work xD i have 8.5 mb free on system but it can't create the folders on bootmenu

sfoot13 said:
Thank u so much and TWRP doesn't work xD i have 8.5 mb free on system but it can't create the folders on bootmenu
Click to expand...
Click to collapse
I've released an .exe version of my script. This should work now .
Link: http://www.mediafire.com/?0kwmx4whjj1ua8c

Thank u bro and sorry but i can't overclock it to 700 =/

i installed TWRP but it doesn't work and when i turn on my mobile it freezes on home screen :/ is a mess.... it's possible install it via recovery (temportal CWM)?

OFF TOPIC.
Congrats on your well deserved mention on the portal.

sfoot13 said:
i installed TWRP but it doesn't work and when i turn on my mobile it freezes on home screen :/ is a mess.... it's possible install it via recovery (temportal CWM)?
Click to expand...
Click to collapse
It worked for others but in your situation the only thing I can advise is to do a data wipe and relfash SBF file. Just go to Guitwo2's there to install permanent CWM.
Link: http://forum.xda-developers.com/showthread.php?t=2229233

rootdefyxt320 said:
It worked for others but in your situation the only thing I can advise is to do a data wipe and relfash SBF file. Just go to Guitwo2's there to install permanent CWM.
Link: http://forum.xda-developers.com/showthread.php?t=2229233
Click to expand...
Click to collapse
:good: Working! Thank u so much, now i have CWM working on my defy mini, i'm really thankful, thanks again

Hi, it's me again... i have a new trouble
i installed the xt320_bootmenu.zip (from this thread http://forum.xda-developers.com/showthread.php?t=2229233) the first time that i rebooted works fine, but the on the second reboot it doesn't work, then i went to data to check if test.log was there and here's the problem... no test.log...
init.d was working fine until that i did it, i guess that my phone have troubles making work init.d
some solution for this annoying guy? thanks in advance!

sfoot13 said:
Hi, it's me again... i have a new trouble
i installed the xt320_bootmenu.zip (from this thread http://forum.xda-developers.com/showthread.php?t=2229233) the first time that i rebooted works fine, but the on the second reboot it doesn't work, then i went to data to check if test.log was there and here's the problem... no test.log...
init.d was working fine until that i did it, i guess that my phone have troubles making work init.d
some solution for this annoying guy? thanks in advance!
Click to expand...
Click to collapse
Looks like 97bootmenu deleted itself, please reinstall the CWM zip again and it should work.

[RECOVERY] TWRP D802/ATT/VZW (2.6.3.3) F320k [AUTO][ZIP] TMO [ZIP][2.6.3.2]

I AM NOT RESPONSIBLE FOR ANY NEGATIVE IMPACTS OR CONSEQUENCES ON YOUR PHONE IF YOU SO CHOOSE TO USE THIS GUIDE.
This is primarily for D802 users. However, people with other variants have had some issues and asked for help, so I have added some files here to help them as well.
PREREQUESITES
1) You must be rooted.
2) Then download one of the following files:
2.6.3.3
IMG
Download the D802 img file here.
Download the AT&T img file here.
Download the VZW img file here.
AUTO
Download the automated D802 file here.
Download the automated AT&T file here.
Download the automated VZW file here.
ZIP
Download the ZIP if flashing from a different TWRP version, or CWM: D802, AT&T, VZW
NOTE: If USB-OTG does not seem to be working on TWRP 2.6.3.3, please revert to 2.6.3.2. if this feature is needed.
Themes - Samurai Champloo
Download the theme itself here.
Download the Flashable ZIP of the theme here.
Download the Flashable D802 TWRP 2.6.3.3 and theme here.
2.6.3.2
Download the D802 img file here, or the latest official software F320K img file here.
Download the automated D802 file here, or the latest automated official software F320K file here.
Download the ZIP if flashing from a different TWRP version, or CWM: D802, F320K, TMO, VZW
INSTALLATION
Auto-Method
1) Extract the contents of the RAR file.
2) Double-click "Install.bat".
3) Prompt will open, click any button to proceed.
4) RSA Fingerprint message will appear on the phone (accept).
5) After installation procedure, type "y" and press enter to reboot into recovery!
1st Manual Method: Initiate ADB and use the following code.
Code:
[COLOR="DarkOrange"]REPLACE "XXX" WITH THE ACTUAL IMG NAME! DO NOT TYPE THE ORANGE WRITING![/COLOR]
adb push XXX.img /data/local/tmp/XXX.img
adb shell
[COLOR="DarkOrange"]IF YOU DONT SEE A # prompt, type su to get it.[/COLOR]
cd /data/local/tmp
dd if=/data/local/tmp/XXX.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
[COLOR="DarkOrange"]Be sure to replace "data/local/tmp" with the actual place your img is stored.[/COLOR]
exit
adb reboot recovery
2nd Manual Method: Place the img on your phone, then use a terminal emulator app with the following code.
Code:
[COLOR="DarkOrange"]REPLACE "XXX" WITH THE ACTUAL IMG NAME! DO NOT TYPE THE ORANGE WRITING![/COLOR]
su
dd if=/data/local/tmp/XXX.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
[COLOR="DarkOrange"](Be sure to replace "data/local/tmp" with the actual place your img is stored.)[/COLOR]
Optional Method: If you want to run some safety checks first, use loki [method here as first option].
INSTALL THEME MANUALLY
1) Connect your phone to your PC.
2) Go into your "internal storage" (internal SD card).
3) Find and open the TWRP folder.
4) Add a folder called "theme".
5) Place the ui.zip into the "theme" folder.
ENTER RECOVERY
Method 1: Hold the power button + volume down button until the LG image appears. Once it does let go of the buttons then immediately push and hold them again until recovery boots.
NOTE: The method above will arrive at the "hard reset" area, but when choosing hard reset, it will take you to TWRP (without actually resetting).
Method 2: Download the free app "Rebooter" from Google Play. If you have root, you will be able to select to reboot into recovery (among other options).
SLOW WIPE CACHE FIX
1) Once in TWRP, go into Settings.
2) Check off the box, "Use rm -rf instead of formatting."
3) Go back and now go into Wipe.
4) Wipe Cache (or another option with wiping cache).
Credit: Credit goes to Dees_Troy and wolfgart, djrbliss who made all recoveries for this phone possible, WACOMalt for his steps, and thecubed for his auto-install code.
USB-OTG
To access USB-OTG devices, go into the desired area (Install, Backup, or Restore). Select "Internal Storage" at the top. Press your USB-OTG device. It may take a second to show as selected on the screen. Once selected, press OK.
If your device does not show up, you can first try going to Mount and check off the USB-OTG box. If it doesn't allow you to check the box, then it doesn't support that device.
NOTE: It may not work with OTG cables and USB devices...
MISC.
Folder Name - There is an "issue" with the date and time [1970]. This issue is reflected in the backup folder names. There are two options to change a backup folder name:
Go into recovery and select Restore. Select the folder you wish to rename. There should now be an option to change the backup folder name.
Go into your TWRP folder by connecting to a PC or using a file explorer and change the backup folder name.
Time Zone - The time zone may be wrong but can be changed in Settings.
SUPPORT
Please check previous posts to see if your question has been answered prior to posting (there is a good chance it has).
Please always include with whether you are rooted or not.
Please always include the variant you are using.
Please always include the method you used.
Please always explain what happened in as much detail as possible.
Anything else that may be relevant.
Otherwise, you might have to wait for others to help you...

now for the mods and custom roms (hopefully kernels too)!!!! Thanks bros!

Thank you for all built hardwork. Was waiting for this.
-LG G2

Thank
Sent from my LG-D802 using Tapatalk 2

Thank you ! Flash successfull on my D802.
But when I want to wipe cache + dalvik cache, it stay on "wipe cache", it's normal issue ?

When I used Wipe Cache it took a long time to finish.

Ok thank you
Like 10 minutes or more ?
Envoyé depuis mon LG-D802 avec Tapatalk 4

I don't recall the exact time, but I would say at least 10 minutes.

Heatshiver said:
I don't recall the exact time, but I would say at least 10 minutes.
Click to expand...
Click to collapse
I have the same. But its not 10min. It is one min. Maximum two.
Sent from my LG-D802 using xda app-developers app

cosmique said:
I have the same. But its not 10min. It is one min. Maximum two.
Click to expand...
Click to collapse
I've noticed the time changing for certain things. One restore I did took nearly 30 minutes! I did restore after that took less than 10. As long as it works, that's all that matters! :good:

I'm on a Recovery Loop. Selected Reboot > System and it keeps rebooting to TWRP.
Used Flashify btw.

m0ngstr0us said:
I'm on a Recovery Loop. Selected Reboot > System and it keeps rebooting to TWRP.
Used Flashify btw.
Click to expand...
Click to collapse
Did you have a recovery before this installed? If so, what recovery? Did you have a good WiFi connection when you downloaded the file (i.e @home, @restaurant, etc.)? Did you try any other methods before flashify?
This should be fixable in either case. If you have a backup from before, I suggest restoring. If not, then you may have to follow this guide to unbrick your phone.
Oddly enough, I'll be in Singapore tomorrow, but I won't be able to reply until late night.

Works perfectly. Thanks!
Sent from my LG-D802 using xda app-developers app

Heatshiver said:
Did you have a recovery before this installed? If so, what recovery? Did you have a good WiFi connection when you downloaded the file (i.e @home, @restaurant, etc.)? Did you try any other methods before flashify?
This should be fixable in either case. If you have a backup from before, I suggest restoring. If not, then you may have to follow this guide to unbrick your phone.
Oddly enough, I'll be in Singapore tomorrow, but I won't be able to reply until late night.
Click to expand...
Click to collapse
Heya! Restoring as we speak. Home networks pretty stable.
Currently downloading the firmware. I can see that the system was not mounted on TWRP. Hence the Recovery bootloop.
Jumped from the Samsung era, gosh I didnt know LG doesnt have much support.
Once back up, bahhh imma just remain stock till more Devs pops up.
Cheers man.

m0ngstr0us said:
Heya! Restoring as we speak. Home networks pretty stable.
Currently downloading the firmware. I can see that the system was not mounted on TWRP. Hence the Recovery bootloop.
Jumped from the Samsung era, gosh I didnt know LG doesnt have much support.
Once back up, bahhh imma just remain stock till more Devs pops up.
Cheers man.
Click to expand...
Click to collapse
Feel free to try CWM, it's much easier to install, and also has a touch-interface.

Heatshiver said:
Feel free to try CWM, it's much easier to install, and also has a touch-interface.
Click to expand...
Click to collapse
I need sleeppppp ~ T.T Lol! Its 1:14am here man. Getting up at 6am later. Prolly another round (with CWM) over the weekends!

I travel to the airport in 4 hours, no rest for the wicked!

Heatshiver said:
I travel to the airport in 4 hours, no rest for the wicked!
Click to expand...
Click to collapse
Just want to check the link is still up, as i'm getting a dead page on the file.
Edit: Ignore the above, i couldnt get online at all. Rebooted and now all ok. Used Flashify to backup original and then flash TWRP.
Thanks
Sent from my LG-D802 using Tapatalk 4

can i use this method to upgrade from twrp 2.6.3 to 2.6.3.2 ?

j_h3000 said:
can i use this method to upgrade from twrp 2.6.3 to 2.6.3.2 ?
Click to expand...
Click to collapse
Yes. I have done so.

Is Anyone on OB3 on SGH-I747M(no I747)and are willing to create a debrick.img for me?

I need to debrick my s3 previously running on 4.4.2 OB3. is anyone running OB3 on s3 I747M (not the I747)?
I have the instructions ready. so first, root your phone. If you don't want to root your phone, good bye because I don't need you. Ill get to the next step once someone is willing to help.

I have the OB1 how you make a debrick? do you have a tutorial? i can help u

dragoonmx said:
I have the OB1 how you make a debrick? do you have a tutorial? i can help u
Click to expand...
Click to collapse
ok. so, first, install busybox from the playstore. then, download terminal emulater, as well.

MhikeiMPC12 said:
ok. so, first, install busybox from the playstore. then, download terminal emulater, as well.
Click to expand...
Click to collapse
Done, what's next...

go into terminal app, type the following:
"su"
It will ask you for root access. type Grant.
"busybox dd if=/dev/block/mmcblk0 of=/sdcard/backup.bin bs=1M count=70"
It will create a backup.bin in the root of /sdcard. ipload that file here. if the file type isnt supported, put it in a .zip then upload it using your pc. if you dont have a pc, just rename the end part of the file (.bin) to (.zip) and upload it here.

@dragoonmx

did he died?

Lets forget him. Do you have OB1?

MhikeiMPC12 said:
Lets forget him. Do you have OB1?
Click to expand...
Click to collapse
Hey, im in cm12.1, i need rom stock?

Thank goodness you are back! here is the link for stock:
http://dl.sammobile.com/PV9dRCQlOD0...1tcQExaUQ../I747MVLUFOB3_I747MOYAFOB3_RWC.zip

MhikeiMPC12 said:
Thank goodness you are back! here is the link for stock:
http://dl.sammobile.com/PV9dRCQlOD0...1tcQExaUQ../I747MVLUFOB3_I747MOYAFOB3_RWC.zip
Click to expand...
Click to collapse
could you link me a full tutorial for the debrick?

OK download Odin v3.07 search it in Google. then, open Odin, and extract all the files to the desktop.
Before continuing, make sure to backup all of your files because it will be deleted. The file you downloaded before, open it with winrar, then extract the files inside, to the desktop. Open Odin. Get your phone and turn it off. Once its off, hold vol down + home button + power button until you get the prompt to go to download mode. click vol up and it should say "Downloading...". Connect the phone to the computer, and Odin should recognise it. go to the AP slot, click it, and navigate to the file you extracted. Wait for Odin to recognise the file. After, click start, and don't disconnect it until it says "PASS" on the screen, or the phone boots up completely in the set-up. Its recommended that you eject the SD card in your phone (if you have one). Also, make sure only F reset time, and auto reboot are checked.

MhikeiMPC12 said:
OK download Odin v3.07 search it in Google. then, open Odin, and extract all the files to the desktop.
Before continuing, make sure to backup all of your files because it will be deleted. The file you downloaded before, open it with winrar, then extract the files inside, to the desktop. Open Odin. Get your phone and turn it off. Once its off, hold vol down + home button + power button until you get the prompt to go to download mode. click vol up and it should say "Downloading...". Connect the phone to the computer, and Odin should recognise it. go to the AP slot, click it, and navigate to the file you extracted. Wait for Odin to recognise the file. After, click start, and don't disconnect it until it says "PASS" on the screen, or the phone boots up completely in the set-up. Its recommended that you eject the SD card in your phone (if you have one). Also, make sure only F reset time, and auto reboot are checked.
Click to expand...
Click to collapse
Lol, for the debrick

Sorry bro I'm on 4.1.1 Stock and Rooted. Can't do OTAs.

dragoonmx said:
Lol, for the debrick
Click to expand...
Click to collapse
Just do what i told you to do earlier. read the other comments. the commands are over there

Hey man! Sorry I haven't been able to respond recently. Sent you a pm, but basically I've been in and out of town a lot the last few days!
Got a couple items that makes the process of creating a debrick.img very easy! Started out with a simple script and it evolved from there!
This one will create a 128mb debrick.img on your internal sdcard. (/sdcard/debrick.img)
Download this and flash in TWRP: https://www.androidfilehost.com/?fid=23196940996969297
That's It! Now just zip and upload!
(ignore the T999 in the filename
It will work on the I747 too)
This next one is slightly more difficult to use, but still easy if you just follow the instructions included in the zip file.
It includes options to create 128mb, 256mb and 512mb images. You should only need the 128mb one but we were using this for testing and troubleshooting when new firmwares were released.
Do NOT flash in recovery. Unzip and follow the included instructions. It will create the debrick.img and then will zip it for you using 7zip.
https://www.androidfilehost.com/?fid=23196940996969297
The first is the easiest and probably all you need. Just included the second in case anyone wants to try it or the first method doesn't produce a working image. (Doesn't fix a brick)
Hope it helps!
Sent from my SGH-T999 using Tapatalk

DocHoliday77 said:
Hey man! Sorry I haven't been able to respond recently. Sent you a pm, but basically I've been in and out of town a lot the last few days!
Got a couple items that makes the process of creating a debrick.img very easy! Started out with a simple script and it evolved from there!
This one will create a 128mb debrick.img on your internal sdcard. (/sdcard/debrick.img)
Download this and flash in TWRP: https://www.androidfilehost.com/?fid=23196940996969297
That's It! Now just zip and upload!
(ignore the T999 in the filename
It will work on the I747 too)
This next one is slightly more difficult to use, but still easy if you just follow the instructions included in the zip file.
It includes options to create 128mb, 256mb and 512mb images. You should only need the 128mb one but we were using this for testing and troubleshooting when new firmwares were released.
Do NOT flash in recovery. Unzip and follow the included instructions. It will create the debrick.img and then will zip it for you using 7zip.
https://www.androidfilehost.com/?fid=23196940996969297
The first is the easiest and probably all you need. Just included the second in case anyone wants to try it or the first method doesn't produce a working image. (Doesn't fix a brick)
Hope it helps!
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
@DocHoliday77 , any chance in hades this would work for atthtcm8 ? i know are completely different beasts , but figured couldnt hurt (too much.lol) to ask.
p.s. not bricked. just to have as 911-just-n-freakin-case.
"all i can really do is stay out of my own way and let the will of heaven be done"

DocHoliday77 said:
Hey man! Sorry I haven't been able to respond recently. Sent you a pm, but basically I've been in and out of town a lot the last few days!
Got a couple items that makes the process of creating a debrick.img very easy! Started out with a simple script and it evolved from there!
This one will create a 128mb debrick.img on your internal sdcard. (/sdcard/debrick.img)
Download this and flash in TWRP: https://www.androidfilehost.com/?fid=23196940996969297
That's It! Now just zip and upload!
(ignore the T999 in the filename
It will work on the I747 too)
This next one is slightly more difficult to use, but still easy if you just follow the instructions included in the zip file.
It includes options to create 128mb, 256mb and 512mb images. You should only need the 128mb one but we were using this for testing and troubleshooting when new firmwares were released.
Do NOT flash in recovery. Unzip and follow the included instructions. It will create the debrick.img and then will zip it for you using 7zip.
https://www.androidfilehost.com/?fid=23196940996969297
The first is the easiest and probably all you need. Just included the second in case anyone wants to try it or the first method doesn't produce a working image. (Doesn't fix a brick)
Hope it helps!
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
So, with this i can create de img, instead of using terminal, codes, etc ?

MhikeiMPC12 said:
I need to debrick my s3 running on 4.4.2 OB1. is anyone running OB1 on s3 I747M?
I have the instructions ready. so first, root your phone. If you don't want to root your phone, good bye because I don't need you. Ill get to the next step once someone is willing to help.
Click to expand...
Click to collapse
Hi, this is the debrick link for the OB1, i747M
https://mega.nz/#!M9ly3DZB!I58rC4SG33Y7k8SWfoKHYwQssasHmwxBPELYQ5bGvv4

dragoonmx said:
Hi, this is the debrick link for the OB1, i747M
https://mega.nz/#!M9ly3DZB!I58rC4SG33Y7k8SWfoKHYwQssasHmwxBPELYQ5bGvv4
Click to expand...
Click to collapse
Ok thanks so much!
Here goes nothing...

Flash custom recovery without PC?

Is there anyway to flash tarp on the HTC 10 without using a PC? Like as a update zip on the SD card? I can't get adb commands to work at all on my new PC I get the "daemon not running" messGe I've installed Ubuntu and Linux mint and still get problems using them it's driving me insane I've been at it for 2 days I've done this 4 times before on my previous phones but I can't get it to work now WTF??!!

Anyone?

Lostmymind904 said:
Anyone?
Click to expand...
Click to collapse
Flashify ?

timbohobbs said:
Flashify ?
Click to expand...
Click to collapse
The phone isn't rooted though it's s-off thru sunshine and that's it

take the OTA.zip from somewhere, unzip it and the the firmware.zip.
You only need the android-info.txt from your current firmware.
Take out ALL .img files, download TWRP and rename it recovery.img zip it with android-info.txt into a 2PS6IMG.zip
Put this on your external SD card, shut down the phone. press volume down + Power.
Press volume up (IIRC, might also be down, its written on the screen) to flash the file.
done.

Haldi4803 said:
take the OTA.zip from somewhere, unzip it and the the firmware.zip.
You only need the android-info.txt from your current firmware.
Take out ALL .img files, download TWRP and rename it recovery.img zip it with android-info.txt into a 2PS6IMG.zip
Put this on your external SD card, shut down the phone. press volume down + Power.
Press volume up (IIRC, might also be down, its written on the screen) to flash the file.
done.
Click to expand...
Click to collapse
Did everything you said exactly but when try to flash nothing happens checked all the MD5s everything right this is driving me insane I've put insane hours into this already

Lostmymind904 said:
Did everything you said exactly but when try to flash nothing happens checked all the MD5s everything right this is driving me insane I've put insane hours into this already
Click to expand...
Click to collapse
Those are the exact instructions how to do it. What happens when you get to download mode? Are you sure the file is on the root of your external storage? Can to upload your 2PS6IMG.zip so someone can check it n

Are you running as admin?
Also HTC fact cord ?
And are all drivers installed on PC Java and all if it's "new" ur prob missing lots of necessary files

jollywhitefoot said:
Those are the exact instructions how to do it. What happens when you get to download mode? Are you sure the file is on the root of your external storage? Can to upload your 2PS6IMG.zip so someone can check it n
Click to expand...
Click to collapse
I just uploaded the file as an attachment to the post, and thx for the help
also I'm Android 6.0.1 and software version 1.81.531.1

kushman said:
Are you running as admin?
Also HTC fact cord ?
And are all drivers installed on PC Java and all if it's "new" ur prob missing lots of necessary files
Click to expand...
Click to collapse
I've run all windows updates and installed all drivers and adb files Android sdk tools aswell could it be windows 10? Never had these problems on xp
Edit: I run all programs from the administrator account and use the original cord of which I have 2 of.

Lostmymind904 said:
I just uploaded the file as an attachment to the post, and thx for the help
also I'm Android 6.0.1 and software version 1.81.531.1
Click to expand...
Click to collapse
You zipped the whole folder. Only zip the files.

jollywhitefoot said:
You zipped the whole folder. Only zip the files.
Click to expand...
Click to collapse
:crying: you Sir are a GOD!!!! Thank you Thank you thank you:good:

Lostmymind904 said:
:crying: you Sir are a GOD!!!! Thank you Thank you thank you:good:
Click to expand...
Click to collapse
Yeah. I'm amazing! Lol.
Glad you got it straight.

jollywhitefoot said:
Yeah. I'm amazing! Lol.
Glad you got it straight.
Click to expand...
Click to collapse
dude I worship you right now, you have no idea how much you'd helped thx again.

i tried it
After boot into downloadmode and start flashing it take's just a sec then till me it's done.
After i boot into recovery it take's me to stock recovery So?
I have tried to change twrp with a new one named recovery but did nothing too

Offical update to Nougat for N920A step by step. Enjoy !!!!

From The Moderator Oka1 - There are no viable links in this OP therefore, I am closing
Thanks
OK. As i promise to some nice people here, then i get it so here it is.
ADB sideload only update S4CQB2-to-U4EQC6. 1.41 GB file seems to me like nougat update.
Nougat Update Here S4CQB2-to-U4EQC6
MD5 checksum : 903aa5c5f26f430133481c4a2cfcdb69
Thanks for ABD instruction @ColoMtn
Make sure you know how to ADB sideload. I'm not responsible for any damage to your phone.
Steps:
1. Backup everything of importance on your phone!!!
2. Now, make sure you have "show file extension" enabled in Windows, and file is ready for ADB as you download SS-N920AUCS4CQB2-to-U4EQC6-UP.zip
3. Shutdown your phone
4. Enter recovery mode by pressing volume up, home and power button together
* A green Droid will appear on screen with the text Installing system update…
5. Using the Volume Button Navigate and the Power button to select ‘Apply Update from ADB’
6. Connect your phone via USB to your computer
7. Open a CMD prompt from your PC. Type cd
in my case: cd C:\Users\Norbarb\Desktop\Note5
8. Navigate to the directory that contains the update ‘SS-N920AUCS4CQB2-to-U4EQC6-UP.zip’
*Note I had issue when the directory contained a space. Moving the update to a directory with no spaces resolved the issue.
Also moved the adb driver to the same directory 'C:\Users\Norbarb\Desktop\Note5'
9. Type adb devices. You should see 1 device listed
10.Type adb sideload SS-N920AUCS4CQB2-to-U4EQC6-UP.zip
11. This took around 25 minutes to complete
12. Phone will now be updated Nougat
EDIT: Please post mirrors if you can. Thanks
For who may need it this is S4CQA1 to U4QC6 update. File is around 1.5 GB and MD5 is 23d4d4c58330b618001e76fc468732d9

Congratulations! Hopefully 928a will have it soon

vista1984 said:
Congratulations! Hopefully 928a will have it soon
Click to expand...
Click to collapse
You are talking about G928A ? I check but only what i get is security update to 4CQB1. If you want i can post it on S6E+ forum.

I just wanted to thank you for this, going to do it now!!!! This day keeps getting better and better!!!!!

norbarb said:
OK. As i promise to some nice people here, then i get it so here it is.
ADB sideload only update S4CQB2-to-U4EQC5. 1.41 GB file seems to me like nougat update.
Nougat Update Here
Thanks for ABD instruction @ColoMtn
Steps:
1. Backup everything of importance on your phone!!!
2. Now, make sure you have "show file extension" enabled in Windows, and file is ready for ADB as you download SS-N920AUCS4CQB2-to-U4EQC5.zip
3. Shutdown your phone
4. Enter recovery mode by pressing volume up, home and power button together
* A green Droid will appear on screen with the text Installing system update…
5. Using the Volume Button Navigate and the Power button to select ‘Apply Update from ADB’
6. Connect your phone via USB to your computer
7. Open a CMD prompt from your PC. Type cd
in my case: cd C:\Users\Norbarb\Desktop\Note5
8. Navigate to the directory that contains the update ‘SS-N920AUCS4CQB2-to-U4EQC5.zip’
*Note I had issue when the directory contained a space. Moving the update to a directory with no spaces resolved the issue.
Also moved the adb driver to the same directory 'C:\Users\Norbarb\Desktop\Note5'
9. Type adb devices. You should see 1 device listed
10.Type adb sideload SS-N920AUCS4CQB2-to-U4EQC5.zip
11. This took around 25 minutes to complete
12. Phone will now be updated Nougat
EDIT: Please post mirrors if you can. Thanks
Click to expand...
Click to collapse
Can anyone show a screen shot of the "About Device" section of the phone settings after applying this update? Thank you in advance!

Have you tried it yourself?I got this in recovery when adb it.
" failed to verify whole-file signature", "signature verification failed
"E:failed to verify whole-life signature" "E:signature verification failed"
Installation aborted.

ifanr said:
Have you tried it yourself?I got this in recovery when adb it.
" failed to verify whole-file signature", "signature verification failed
"E:failed to verify whole-life signature" "E:signature verification failed"
Installation aborted.
Click to expand...
Click to collapse
On what firmware currently are you? This update is only from baseband N920AUCS4CQB2. Also you may have corrupted recovery. To fix this you have to ODIN back to latest firmware and try again.
Anyway just in case i'm uploading raw file w/o .zip extension to another place.

norbarb said:
On what firmware currently are you? This update is only from baseband N920AUCS4CQB2. Also you may have corrupted recovery. To fix this you have to ODIN back to latest firmware and try again.
Anyway just in case i'm uploading raw file w/o .zip extension to another place.
Click to expand...
Click to collapse
It's S4CQB2.Could you please give me the md5?And I'm gonna to flash the recovery to work it out.

ifanr said:
It's S4CQB2.Could you please give me the md5?And I'm gonna to flash the recovery to work it out.
Click to expand...
Click to collapse
I post it MD5 in first post.

norbarb said:
I post it MD5 in first post.
Click to expand...
Click to collapse
Matched.I'll try some other ways to work it out.Tks.

ifanr said:
Matched.I'll try some other ways to work it out.Tks.
Click to expand...
Click to collapse
You may try removing .zip extension and try again. Sometimes works

i get cannot read SS-N920AUCS4CQB2-to-U4EQC5.zip

jerrycoffman45 said:
i get cannot read SS-N920AUCS4CQB2-to-U4EQC5.zip
Click to expand...
Click to collapse
Two resons :
1. corrupted file
2. file in wrong place

norbarb said:
Two resons :
1. corrupted file
2. file in wrong place
Click to expand...
Click to collapse
The file may corrupted.When I use winrar to unzip this file.It says there is a checksum error occurred in system\priv-app\Lookout_ATT\oat\arm\Lookout_ATT.odex. The file is corrupt.
I tried your ways but did not work out.

norbarb said:
Two resons :
1. corrupted file
2. file in wrong place
Click to expand...
Click to collapse
thats what i thought too but md5 checks and the files in the same folder as adb and fastboot

ifanr said:
The file may corrupted.When I use winrar to unzip this file.It says there is a checksum error occurred in system\priv-app\Lookout_ATT\oat\arm\Lookout_ATT.odex. The file is corrupt.
I tried your ways but did not work out.
Click to expand...
Click to collapse
I post it link to raw file try other one or re-download.

ifanr said:
The file may corrupted.When I use winrar to unzip this file.It says there is a checksum error occurred in system\priv-app\Lookout_ATT\oat\arm\Lookout_ATT.odex. The file is corrupt.
I tried your ways but did not work out.
Click to expand...
Click to collapse
jerrycoffman45 said:
thats what i thought too but md5 checks and the files in the same folder as adb and fastboot
Click to expand...
Click to collapse
Most of the time it is problem do to recovery. You may have to ODIN firmware back and try again.
Anybody flash this file w/o problems? I'm sorry but only Note 5 i have it is my wife's work phone and i can't mess with it.

norbarb said:
Most of the time it is problem do to recovery. You may have to ODIN firmware back and try again.
Anybody flash this file w/o problems? I'm sorry but only Note 5 i have it is my wife's work phone and i can't mess with it.
Click to expand...
Click to collapse
I'll try it. Looks I already messed up my phone.Lucky it's weekend.lol.

ifanr said:
I'll try it. Looks I already messed up my phone.Lucky it's weekend.lol.
Click to expand...
Click to collapse
ALL WHO TRY PLEASE STOP. Seems like uploaded file got corrupted. I'm uploading once more

norbarb said:
You are talking about G928A ? I check but only what i get is security update to 4CQB1. If you want i can post it on S6E+ forum.
Click to expand...
Click to collapse
It's very thoughtful of you. If you have time please post it at your convenience.