I have a stock at&t note 5 and just after the 6.0 upgrade I started having charging issues, had the charge port replaced, and battery as well. When the charger was plugged in, it wouldn't recognize that it is plugged into anything, but It would charge turned off, yet when it was plugged in, it wouldn't show the battery icon with the ascending green dots that it normally shows, although it would still charge...slooooowly....did a factory reset, still nothing, but now it won't charge at all anymore. Any ideas on how or what to do to fix this issue would be greatly appreciated.
Related
Everything was working fine with my dinc up until tonight, when I attempted to charge the phone. Whenever I plug it in to charge, the charge seems to flicker (The charge LED keeps turning on and off, and the charging indicator in the notification bar keeps flashing from charging to not charging).
I suspected it might be a cable problem, so I used a completely new charging cable and plug that I got from my replacement dinc. Same problem.
Please note that this phone is in stock, original form. No rooting or any modifications have been done to it.
Any ideas as to what is wrong or what I can do to fix it? I tried pulling the battery but that did no good. When I put it back in, the phone automatically turns on (without me touching anything) and the same charging problem persists.
All help is greatly appreciated. Greatly. Thank you in advance.
When you plug into your computer, do you constantly lose connection? Sounds like (since you tried a different cable - that was my first guess) it's probably your micro usb connection slot. Try blowing it out, wiping it out, etc. Maybe you got some pocket lint in there that's messing with the connection.
So I just received my glorious CDMA GNex in the mail a few days ago. Needless to say, I got crackin' right away and unlocked the bootloader, rooted, and loaded up a ROM/kernel. Everything has been great so far, up until a few hours ago. The phone simply will not charge.
When I plug it into the outlet when it is on, there is no charging status icon. The battery discharges.
When the phone is off, but plugged in, the battery is "full" and the icon remains in the center of the screen until I do a battery pull. I cannot get the phone to power on after plugging it into the wall.
When the phone is connected to my computer via USB, no notifications show up. I cannot access the contents of the card through this method.
Is there any way to revert to stock without the use a computer, so I can go and swap out for a new device? I've got about 50% charge left on the battery, so I've got a little bit of time to transfer files over WiFi, etc.
Any help would be greatly appreciated- I understand that I root/unlock at my own risk, but I really don't want to get slapped with a $650 bill by Verizon because my device was rooted and warranty was void.
Thanks.
You tried to use various cables, right?
Yup, same result. Fully charged icon when plugged in, and no response when plugged into a PC.
Some ROMS freeze the phone if charging when it's off. Does it charge from the outlet with the phone ON?
Well, looks like the issue resolved itself.
For what it's worth, the phone was not taking a charge when it was on. I was playing with some settings last night with the plugged in and noticed that I had discharged about 10%. Took the battery out, rebooted, etc. No luck.
I unplugged it overnight and pulled the battery while I slept and looks like it takes a charge now. Responds as a media device and everything. Talk about a heart attack...
Thanks for trying to help. I really appreciate it. Happy holidays!
Ok so everytime i turn my phone off to chager it will just turn back on. IT doesn't matter what percentage the battery is on
For Example:
1)the phone is on currently charging (44%) and i turn it OFF (with the charger still plug) it will just turn back on
2)My phone is off and i plug the changer it will just turn on
3)I let my phone die and i plug the charger on it will just turn back on
Im using Juggernaut v4.1 and my phone being doing this since Juggernaut v3.7
Can someone help... Is it the room or is it my phone
Similar issues
I have a rooted and lightly modded stock 2.3.6 but I've been having these issues ever since I rooted and I was on stock 2.3.5
1. Charger sometimes doesn't charge at all
2. If I'm on a call via bluetooth and I connect it, it won't charge until I hang up
3. My previous charger for my t959 was working for the 1st week and now it doesn't charge my phone at all.
4. after i plug in my phone to my oem charger it takes about 10 seconds to recognize it and then starts charging
I don't know what the hell this is but it's pissing me off. I've done a wiped dalvik and don't a clean install and nothing changes. I didn't have this problem the 1st week i had the phone but now on my 3rd week it's pissing me off.
I hope someone has an answer or at least a similar problem.
I think it is charging. It just not showing it is charging until your turn on the screen.
Happen to my phone too, but it is charging.
I would love it show the orange light when charging and green light on full charge.
thecalip said:
I think it is charging. It just not showing it is charging until your turn on the screen.
Happen to my phone too, but it is charging.
I would love it show the orange light when charging and green light on full charge.
Click to expand...
Click to collapse
No my phone won't charge! I've tried different chargers and it randomly charges. It's three weeks old and its' weird, now i've connected it to my laptop and the usb isn't even recognized anymore and I have the drivers for it.
Anyone with the same problem?
Hello
Long story short. Yesterday running PA + Lean kernel I sit down to play TURBO. After one and a half hour, I went back and put my phone down and plugged in the cable. It did nothing. I played a bit with moving the cable head plugged in the phone and started charging as AC. Unplugged, see if fast charged was toggled. It wasn't. Plugged back in. Nothing. Somehow, someway, I managed to connect. Was really hard to finish it and flashed back a stock yakjuwx (as my original rom was). Everything nice and good, but now sometimes I get the unrecognized device and have to unplug and plug back. Since than, these are happening:
- when devices is turned off, I plug the cable, the icon with bolt comes up, than switch to charge animation and it does disappear. Pushing the power buttons for a short time, not for long as power on, wakes the phone and displays the animation. Is this normal? or should the animation be displayed constantly.
- phones in battery stats doesn't show "discharging" it shows "not charging". Shouldn't it show "Discharging" when there is no cable plugged in?
- sometimes I got flashes as if is plugged in, the so called "phantom charge". (no, bending the tongue doesn't help).
NFC toggle off on doesn't help either.
Soon I'll send back the phone in warranty, as I bought it it was sent back one time for heavy temperature rised and video recording microphone problem, although they didn't changed anything with the microphone, just the motherboard.
Now I have problems with the sleep too... altough I had always. Here are some pictures attached.
I am affraid about not being able to unroot soon if the usb board goes to sleep... it's a matter of time I think... so any ideas?
I'm having some problems with my wall charger or phone, the battery notification icon doesn't even change when i plug it in. Pluging to the computer works as expected, the icon changes to the charging icon.
I thought the charger was dead so i tried on a friend's zenphone 3, it seems normal on his phone, right on the lock screen it says it is charging (that doesn't happen on my moto z).
I turned off my phone and connected to the wall, the led turned on and it was charging, so it is not completely dead...
Turned the phone on and still no indication it was charging. So i opened the battery status and it says it is charging, it is VERY slow (still at 25% after many minutes) but it says there it is charging.
Unfortunately i couldn't try another charger yet. I haven't modded this phone in any way, still, could it be a software issue? It even got an OTA update yesterday but it didn't solve the problem.
Insert the pin in your​ device properly or it will charge slowly.