Develop Bugs

[REVIEW] Adreama TPU Cases

I picked these up from my local Fry's and have been very impressed so far.
The fit is absolutely perfect. Seriously, I have never had a case before on any phone that fit this well! I have the Verizon GNex and am running the extended battery with the regular battery cover and also have a full-body Invisible Shield Installed. No odd bulges or gaps anywhere. (Note that I am not using the extended battery COVER, didn't fit at all with that on.) The front lip goes right to the edge of my Shield without causing it to bubble or push up. Looks seamless.
http://www.frys.com/product/6937177
It's a two-pack. Comes with Black and Blue. The black is opaque; the blue is semi-transparent.
I have four of the five cases that Verizon sells for the Gnex: both their black and blue TPU cases, the Incipio (very much like an Otterbox Commuter), and their black soft rubber case. The blue TPU destroyed my first Invisible Shield due to poor quality control, lots of excess plastic under the lip. The Incipio was nice, but the white shell began to yellow within a week. The soft rubber case is great, but adds quite a bit of bulk and makes it difficult to get in and out of my pocket. I actually bought Verizon's black TPU the same day I got these, and it is also very nice, no excess plastic, but it is slightly more bulky than these Adreama cases, and the opaque black looks nicer than transparent, IMO.
So, in short, I give them two thumbs up!
Here is their website with a better picture: http://www.adreama.com/products/mobile-phone-skins/samsung/galaxy-nexus

amCase Hybrid Bumper Case - Review with Pictures

I received an amCase Hybrid Bumper Case and overall it’s pretty good.
The case is a TPU type case with black sides and a matte clear back. The quality of the material used is pretty standard and is on par with cruzrlight that I think many of you will be familiar with. The fit of the case is perfect with everything lining up properly and is very snug, but not too tight where it’s difficult to take on or off. I am using a spigen screen protector with the case and it’s not interfering with it by pulling up the corners or anything like that.
I actually like this case better than the Ringke Fusion one that I got. The amCase nailed the seams on the back of the device where the matte clear plastic and the black plastic meet. They look like one piece of plastic unlike the Ringke where you can see clear glue like seams which detracts from the aesthetic significantly. The case works no problem with the nexus 4 wireless orb charger as well.
The one complaint I have about the case is the power button movement. It is pretty tight and doesn’t give that satisfying clicky press. It’s not as bad as I’ve seen on some cases, but it’s nothing like the wonderful movement on the official nexus 4 bumper.
Overall, and for the money, I would say this is a solid case and I would definitely recommend purchasing it if you’re in the market for a TPU case. The price point is right and the materials and fit are right on. I'd give the case 4.5 out of 5.
If anyone has any questions about the case I’d be happy to answer.
http://www.amazon.com/amCase-LG-D82...-1&keywords=amCase+Hybrid+Bumper+Case+nexus+5

Thank you for the review and pictures. It seems that the back isn't clear enough to fully reveal the nexus logo.

I also have the amCase Hybrid Bumper Case for the Nexus 5. Here are my thoughts:
+case contours to curves of Nexus 5, unlike boxy design of Spigen Ultra Hybrid case
+ports are snug and do not seem to let in dust like the Spigen Ultra Hybrid case, which has overly-large port openings
+Volume Low button has clicky feedback. (Power button and Volume Up button do not have clicky feedback on my case)
+ Flash module cutout is large, i.e. good. (Other cases with tiny, circular flash module cutouts produce distorted photos when flashed is used because the flash bounces off the sides of the tiny cutout and reflects back into the camera lens.)
+- especially snug fit
+- frosted semi-transparent back panel is...different
+- volume and power buttons are covered (they are not cutouts)
-slippery, not grippy

amCase Ultra Slim-Fit Case Review + Pictures

amCase Ultra Slim-Fit Case
There has been a lot of slim cases like the Rearth Ringke slim, spigen and others. The amCASE ultra slim is a bit different than the others.
First, its thin alright. Fits well and not much wiggle room when in the case. The back has a nice soft matte grip finish, No corner was sharp but a nice smooth rounding on all sides/corners. There is some lift ont he bezel around the phone so it lifts the phone just a bit to prevent scraching the glass on the front when setting it face down on a table.
The amCase differes in that there is no bezel by the buttons on the phone. While it makes it have even less protection than other slim cases; it makes it a lot easier to take it off and on. The Rearth slim I have has just a good fit but the buttons would always get caught when taking it off or on.
It doesn't add much protection on the bottom or sides which is nice to have complete free access to all the ports/seakers.
This is definitely not a case if you're clumsy with your phone but there to prevent the small drops or scratches. Very minimalistic and good construction witht he added bonus of the easiest to take on and off of the phone than other slim cases

This is my kind of case. I presently have the rearth slim. It's the only case for me, so far. This looks like a great option for those of us who like the more professional look vs the bling, bulky, rubber, two piece, colored type cases. I'll have to try one. Is the logo (boo hiss btw) raised or etched in any way or is it just printed?
Nexus5

almost bought this case, but reviewers had issues with the matte finish coming off after a week.
Please update your review after couple weeks on the fit and finish.
thanks

jbdan said:
This is my kind of case. I presently have the rearth slim. It's the only case for me, so far. This looks like a great option for those of us who like the more professional look vs the bling, bulky, rubber, two piece, colored type cases. I'll have to try one. Is the logo (boo hiss btw) raised or etched in any way or is it just printed?
Nexus5
Click to expand...
Click to collapse
just printed on. I'm sure it'll start rubbing off soon enough

I only used the amcase on my nexus 4. The first one I had was amazing. The second started peeling almost immediately.
I just received my new one for the nexus 5. It has a slippery soft feel that is really disappointing.
Sent from my Nexus 5 using Tapatalk

This guy has a video review of it and shows the case peeling pretty badly at all 4 corners.
http://www.youtube.com/watch?v=O8CB7i_ExSA

Protective Case

I always rock an Otterbox Commuter case on my phones mainly for work conditions can get rough at times. From what I've seen, Otterbox is only offering their Defender series (too big and bulky) and their Symmetry series (thinner, one piece case). I've decided to go with the Symmetry series and I'm pleasantly surprised. It definitely adds a little bit of bulk, but not as much as the Commuter, while offering great all-around protection. The one piece design is easy to put on and remove (unlike previous Symmetry cases I've tried on other phones). I do wish that there was a bit of grip on the sides like the Speck Presidio series cases, but I like the design. Unfortunately the only options were clear, pink, or black.... so I went with black.
So what's your choice for a protective case? Share pics and comments.

I too normally use the Otterbox defender for my phones but I wanted to try something new. I bought a poetic revolution for myself and a supcase unicorn beetle pro for my wife. They appeared a little slimmer and had port covers which I wanted. Amazon says they will arrive tomorrow so I shall see.

holden56 said:
I too normally use the Otterbox defender for my phones but I wanted to try something new. I bought a poetic revolution for myself and a supcase unicorn beetle pro for my wife. They appeared a little slimmer and had port covers which I wanted. Amazon says they will arrive tomorrow so I shall see.
Click to expand...
Click to collapse
I had the unicorn beetle pro for my Nexus 6 and it's a nice cheaper alternative to the defender, but it still adds more bulk than the commuter case. I may look into the poetic case though. Let me know how they work out for you. ?
I went to Best Buy and tried out the Defender case. Definitely too bulky and I hate the built in screen protector (and it doesn't sit well over a glass screen protector, even if you take out the built in one).

You may not like the poetic as it has the built in screen protector. I'm used to the bulk of the defender so I'm not a great judge of the size. I will tell you the poetic is smaller then the supcase unicorn beetle. Built in port covers are nice too, overall it is a smaller rugged case you can say.

just received the Poetic Karbon Shield Slim Fit Case With Anti-Slip Side Grip and Carbon Fiber Texture. it's a slimmer-fit case that offers (what i believe is) more protection than a thin TPU case. sharing pictures for those interested to know how it fits the G6. i also have tempered glass screen protector on the phone as well. you'll also notice in the first pic that wireless charing works with the case on the phone. i usually go with a much thinner case but i really like the look and feel of this one. will give it a week or so before i decide if it's a keeper. (please excuse the dust in the pictures - our HVAC ducts were being cleaned when i took these pictures).

Went from a Note 3 with Otterbox Commuter to a G6 with Spigen "Tough Armor" case, and am satisfied with it. Feels like it provides just as much protection as the Otterbox Commuter, yet not adding quite as much bulk. I'm kinda rough with my phones sometimes, and I'd have peace of mind if I were to accidentally drop my G6 from waist-height or so.
If you choose to go with Spigen, definitely buy it off Amazon, rather than directly from Spigen's website; it's cheaper off Amazon.

cortez.i said:
just received the Poetic Karbon Shield Slim Fit Case With Anti-Slip Side Grip and Carbon Fiber Texture. it's a slimmer-fit case that offers (what i believe is) more protection than a thin TPU case. sharing pictures for those interested to know how it fits the G6. i also have tempered glass screen protector on the phone as well. you'll also notice in the first pic that wireless charing works with the case on the phone. i usually go with a much thinner case but i really like the look and feel of this one. will give it a week or so before i decide if it's a keeper. (please excuse the dust in the pictures - our HVAC ducts were being cleaned when i took these pictures).
Click to expand...
Click to collapse
I almost went with this case but I got this one instead. It's the Caseology.

This Poetic has been great for me after a few days of use. Lightweight, decent protection, and good grip.
Poetic Affinity Slim Fit for LG G6 Clear Case With Anti-Slip Side Grip and Reinforced Corner Protection Bumper for for LG G6 Black/Clear https://www.amazon.com/dp/B06W5K3YWF/ref=cm_sw_r_cp_apa_N4v7ybREB4YDC

I wanted to order Poetic but they don't ship to EU and i get Ringke Fusion but still waiting for the phone.

cortez.i said:
just received the Poetic Karbon Shield Slim Fit Case With Anti-Slip Side Grip and Carbon Fiber Texture. it's a slimmer-fit case that offers (what i believe is) more protection than a thin TPU case. sharing pictures for those interested to know how it fits the G6. i also have tempered glass screen protector on the phone as well. you'll also notice in the first pic that wireless charing works with the case on the phone. i usually go with a much thinner case but i really like the look and feel of this one. will give it a week or so before i decide if it's a keeper. (please excuse the dust in the pictures - our HVAC ducts were being cleaned when i took these pictures).
Click to expand...
Click to collapse
I just ordered this one on Amazon. Saw the office and couldn't pass it up. Glad to see it looks good, and works well with a glass protector. I got the Spigen glass 2 pack as I've always liked everything Spigen makes.
Was gonna get the unicorn beetle that I had for my s7e, but don't think I need that much protection on this one, plus no edge screens that I need to prevent my palm from hitting lol.
Update: I hate the Karbon case. Doesn't fit tightly and leaves gaps at the edges on the front. I guess for $8 it'll hold me over until I get a good case, but this one is not staying pass this weekend.
Sent from my LG-H872 using Tapatalk

I would go for the Spigen Rugged Amor, it’s much slimmer and provide pretty much the same protection as the symmerty series http://www.the-reviewr.com/best-lg-g6-case/

Had that rugged armor for my v20 and loved it. Decided to go with the neo hybrid for the g6
Spigen Neo Hybrid LG G6 Case Herringbone with Flexible Inner Protection and Reinforced Hard Bumper Frame for LG G6 (2017) - Gunmetal https://www.amazon.com/dp/B01N4QCEHA/ref=cm_sw_r_cp_apa_2o68yb7SMM8C1

djjroc007 said:
Had that rugged armor for my v20 and loved it. Decided to go with the neo hybrid for the g6
Spigen Neo Hybrid LG G6 Case Herringbone with Flexible Inner Protection and Reinforced Hard Bumper Frame for LG G6 (2017) - Gunmetal https://www.amazon.com/dp/B01N4QCEHA/ref=cm_sw_r_cp_apa_2o68yb7SMM8C1
Click to expand...
Click to collapse
Do you have pics of what it looks like on your phone?
Thanks!

So guys I'm searching for a good protective case that doesn't add too much bulk. I'm torn between the Poetic Revolution and the Supcase Unicorn Beetle. I like the way the Poetic looks except for the cutout on back, I prefer the Unicorns Cutouts. If anyone here has any pics to share, that be awesome. Or unless someone has another case to throw in the mix. THanks

Case reviews: Rhinoshield CrashGuard & SolidSuit, Zeking Ultra Slim, Crave Slim Guard

Case reviews: Rhinoshield CrashGuard & SolidSuit, Zeking Ultra Slim, Crave Slim Guard
i've used a number of cases that you can easily purchase from amazon before including the spigen tough armor, spigen neo hybrid, spigen crystal shell, ringke fusion and the rhinoshield crashguard. I think the 2 most important aspects of a good phone case is reinforced corner protection and elevated front edge to protect the screen. When I got the pixel 2 XL, I started looking for a slim yet protective case and I ended up trying the 4 cases below. I used each case about 1-2 weeks and thought I'd share my thoughts. I did receive the Rhinoshield cases from the company for free but they are not involved with my write up in any way, shape or form.
The photos attached are in accordance to the order of which the cases are reviewed.
Rhinoshield CrashGuard bumper case:
This was my favorite case when I had my galaxy s7 and when I moved on to the LG G5 then G6, I was disappointed to find out that they don't make the CrashGuard for them.
From my experience using this case with the galaxy s7 (which I had for about a year before it was stolen...), this case simply works. I am not the best when it comes to handling my phone therefore it gets dropped a lot; this case really does the job well when it comes to impact protection while being minimalistic. During the past 2 weeks with the case, I've dropped my pixel 2 a few times from different heights, mostly from standing height and some from when I get out of the car and the case has been effective. According to Rhinoshield, their cases have a 11.5 ft impact resistance rating which supposedly far exceeds the " US MILITARY DROP TEST STANDARD".
Many others have commented on how slippery this case is. Well, it is and that's because Rhinoshield now coats the cases to make them more stain resistant. For me, personally, I don't mind as I find it easier to slide in and out of my pockets.
Some physical changes I've noticed is that the case fits A LOT more snug to the point where it is quite difficult for me to take the phone out of the case. That's an inconvenience for me as I fly a drone here and there and in order for the phone to fit into the remote controller I have to take the case off. Now I may have to buy a separate phone holder for the remote controller. Another change that's worth pointing out is that in my old s7 case, the raised lip on the back of the case was more pronounced at the corners and the top and bottom edges. This gave me more of a piece of mind since it is a bumper case and the back of the phone is exposed. However, it seems like they have eliminated that from their design of the new cases and I wish they kept that. Lastly, now you can change up the color of the power button but the colored buttons have to be purchased separately. The power button is very responsive but the volume rocker you'd have to press a little bit harder.
Other non-noticeable changes they've made since I had their case for the s7 is they now use a different material (fancy name 'ShockSpread Material') for their cases which is suppose to be lighter, thinner but just as protective and durable.
The case is friendly with their screen protectors, as well with the Sparin TPU screen protector that I got from amazon. In terms of skin, it will not work with the Dbrand precision fit skin but fine with standard fit. However, it will leave an indent on the standard fit skin as shown in photos.
Lastly, if you happen to have a Feiyu tech SPG-c gimbal, with the heaviest counterweights the phone with this case just barely works.
Rhinoshield SolidSuit
Overall, very similar to the CrashGuard bumper case.
I'll highlight the differences:
- compatible with the RhinoShield add-on lens
- of course, heavier and bulkier (heaviest of the 4)
- feels very solid because of the overall construction, as well the back is protected
- most of the finishing is the same as the CrashGuard, however the back of mine has the carbon fiber finishing which I guess made it less slippery
- volume rocker is much more responsive than the CrashGuard
- did not work at all with the Feiyu tech SPG-c gimbal
Zeking ultra slim TPU case from amazon canada
In my opinion, very good case. For less than $10, you get padded corner protection plus raised front edge without much added bulkiness; this is just as good as cases such as ones from Spigen or Ringke but for 1/3 or 1/2 the price.
It is made of TPU and I haven't had the case long enough to speak about yellow-ing, but the TPU feels decent not cheap. On the inside of the back of the case, there are these microdots and I can't understand their purpose. You can actually feel them when you brush you finger across. The side buttons are responsive, clicky. A really thoughtful and unique design is that along the sides of the case the TPU's texture is different and it allows for better grip (almost like there's a very smooth sandpaper strip). The advantage of this case in comparison to the two Rhinoshield cases above is that it does feel slimmer in hand.
When it comes to impact protection, it doesn't have that "over 11 ft of impact protection" that's marketed for the Rhinoshield cases, however the few times I dropped the phone in this case it was completely fine.
I did try to use this case with the Dbrand 'precise fit' skin. It will not work well with the skin if you have the tendency to take your phone in and out of the case. As i took my phone out, it lifted the skin that goes around the the corner on the side of the phone. On the other hand, the 'standard fit' skin did just fine. In terms of screen protectors, it is compatible with the Sparin TPU screen protector as well as the protectors from Rhinoshield.
Similar to the Rhinoshield CrashGuard, this barely worked with my Feiyu Tech SPG-c gimbal.
Crave Slim Guard from amazon canada
This case is very similar to the Ringke Fusion in a sense that both have the TPU bumper that goes around the case, and the clear polycarbonate back. This case, however, has a very pronounced elevated front lip to the point where it almost feels like the phone is sunken in inside the case. It's very good if you're looking for extra raised front protection, however when you're swiping left or right on the screen you will feel the edge more so than the other cases. It may help if the company just round off the raised edges a little bit more. A thoughtful part of their design is that they raised the back corners a tiny bit; my guess is they are there to raise the back a little bit so when you sit the phone on a flat surface it doesn't scratch up the polycarbonate back. All the buttons super responsive and clicky; probably the best buttons of the 4 cases. The phone does feel pretty slim in this case and I think even slimmer than the Zeking TPU case. I don't remember dropping my phone while using this case, but based on its construction it should do just as good as the Ringke Fusion case but definitely not as good as the other 3 cases above.
Overall I think this case is just as good as the Ringke Fusion if not better protection because of the pronounced elevated front edge. Keep in mind, from my experience using these cases with a polycarbonate back they will get scratched up over time and you will see more finger print smudges.
When it comes to compatibility with skin and screen protectors, it is the same as above.
Similar to the Rhinoshield CrashGuard and ZeKing ultra slim, this barely worked with the Feiyu Tech SPG-c gimbal.
Long review but hope this helps. I will start another post for my screen protectors review as well as a review of the add-on lens from RhinoShield.

Nice reviews! Kudos
My fav is the Zeking ultra slim TPU!

Not related to the topic, but can you tell me where you get the yellow skin for your Pixel? I'm interested in that yellow lock button.

allweknowisa said:
Not related to the topic, but can you tell me where you get the yellow skin for your Pixel? I'm interested in that yellow lock button.
Click to expand...
Click to collapse
from DBrand
see my review here
https://forum.xda-developers.com/pi...and-skins-review-hyperblack-titanium-t3780607
The yellow power button is from rhinoshield. you can purchase the colored buttons separately on their site and it's compatible with their cases.

Thanks for your detailed review. One thing is that I tried Ringke Fusion and Crave Slim Guard; I think Ringke Fusion does provide a bit more of FRONT lip, doesn't it?

drvalianto said:
Thanks for your detailed review. One thing is that I tried Ringke Fusion and Crave Slim Guard; I think Ringke Fusion does provide a bit more of FRONT lip, doesn't it?
Click to expand...
Click to collapse
I don't have the exact measurements and my experience with the ringke fusion is with the lg g6 case. To me it seems like the crave slim guard has a slightly more raised front lip than the ringke fusion but then i am not comparing apple to apple.

Update:
I stuck with my RhinoShield Crashguard and it has protected my phone... extremely well. I have lost count how many times I've dropped it face down, down the stairs, and more.... yep, a bit clumsy with phones.
I stayed at this villa in Bali, and it literally tumbled down these stairs from top to bottom..and my phone remains immaculate. (except when i was in Bali I decided to use it briefly without the case..and of course I dropped it..... )
Included photos of the case with the worst scratches and also...the staircase where it literally bounced its way down...