I have lg g4 ls991
model lgl991
Software ls991zvc
Can i root it ? Can't find roms for g4 sprint :/
i think https://www.youtube.com/watch?v=UU0KxlBXb2g
NzacK said:
I have lg g4 ls991
model lgl991
Software ls991zvc
Can i root it ? Can't find roms for g4 sprint :/
Click to expand...
Click to collapse
if it is on lollipop then yes. using low effort root.
you need to inject rooted image system.
raptorddd said:
if it is on lollipop then yes. using low effort root.
you need to inject rooted image system.
Click to expand...
Click to collapse
Its on 6.0 :/
Lg ui kinda sucks drains battery & some performance stutters
NzacK said:
Its on 6.0 :/
Lg ui kinda sucks drains battery & some performance stutters
Click to expand...
Click to collapse
you need unlocked bootloader and only tmobile have it and some european h815. for 6.0
you can root it if on lollipop. but again, you need to know if you can downgrade to lollipop. theres antirollback versions. on mine i cant there V1 V2 V3 am currenly on V3 so i cant roll back to V2. or V1. doing so will hard brick phone.
but you need to search or ask in sprint section, if you can. not all phones has antirollback restricted.. am pretty sure ive seen some beign at 6.o and atirollback is 0.
to chekc what version you are. search your phone hidden menu . enter it on dialer and go to software scroll all the way down and it says antirollback version..
raptorddd said:
you need unlocked bootloader and only tmobile have it and some european h815. for 6.0
you can root it if on lollipop. but again, you need to know if you can downgrade to lollipop. theres antirollback versions. on mine i cant there V1 V2 V3 am currenly on V3 so i cant roll back to V2. or V1. doing so will hard brick phone.
but you need to search or ask in sprint section, if you can. not all phones has antirollback restricted.. am pretty sure ive seen some beign at 6.o and atirollback is 0.
to chekc what version you are. search your phone hidden menu . enter it on dialer and go to software scroll all the way down and it says antirollback version..
Click to expand...
Click to collapse
I can't get into the hiddenmenu i dialed *#06* & it says unknown application i tried 3485#*991# it says connection problem or invalid mmi
NzacK said:
I can't get into the hiddenmenu i dialed *#06* & it says unknown application i tried 3485#*991# it says connection problem or invalid mmi
Click to expand...
Click to collapse
i dont have mine on hand. as i also had trouble getting to hidden menu. till i found one that worked.
raptorddd said:
i dont have mine on hand. as i also had trouble getting to hidden menu. till i found one that worked.
Click to expand...
Click to collapse
Looks like i hav to use g4 without root cause on this phone it is super risky btw thnx for helping
NzacK said:
Looks like i hav to use g4 without root cause on this phone it is super risky btw thnx for helping
Click to expand...
Click to collapse
not as long as you follow steps and can be downgrade to LP then its all good.
Related
So Friday i went to verizon and bought me a new LG G3 phone, 32G memory 3G RAM, you know the good **** LOL. Well when i got home i wanted to root the phone but when i looked it up there was many options, IOROOT, TowelRoot, and Stump Root. So i tried towel root on the phone but when i clicked the button towel root said my device isnt compatible and my phones build is the VS98510B. So at that point i decided to try IOROOT. When i launched the batch file i made sure i made myself a developer, got the proper drivers, made it connect via usb and set the phone connection to Ethernet. Well in the batch file it said everything was good and that i just needed to click any button to continue well i did that but when i clicked a button it simply closed the batch file. All i clicked was the space bar and it closed. Stump root isnt compatible and im afraid to use bruteforce mode. Any one got any help with this? Andriod Kitkat 4.4.2
Use the brut force method in stump. Takes about 5 minutes.
TonikJDK said:
Use the brut force method in stump. Takes about 5 minutes.
Click to expand...
Click to collapse
But i mean is it safe? Im kinda new to the whole android rooting scene i use to use iphones and **** so i dont wanna break this phone since i just got it
Worked for me and I have not seen a single report of any problems.
TonikJDK said:
Worked for me and I have not seen a single report of any problems.
Click to expand...
Click to collapse
So when i root it do i need to back up anything? Ive heard of whats called TWRP but idk what that is
I used stump root. My phones still works. You can't install twrp because bootloader is still locked, have to wait for a way to unlock it.
ToF_Itachi said:
So when i root it do i need to back up anything? Ive heard of whats called TWRP but idk what that is
Click to expand...
Click to collapse
Read a bit here TWRP is a recovery and backup software for when you flash a custom ROM.. You're not flashing any custom ROMs just yet.. So... I don't think you need to backup anything just yet. After you root the phone you can use TWRP to backup your current stock ROM .. Good luck ..
:good:
I used ioroot with no problems. Check out this vid, pretty straight fwd on what you need to do.
sent from my VZW VS985 aka LG G3
Showtek1980 said:
Read a bit here TWRP is a recovery and backup software for when you flash a custom ROM.. You're not flashing any custom ROMs just yet.. So... I don't think you need to backup anything just yet. After you root the phone you can use TWRP to backup your current stock ROM .. Good luck ..
:good:
Click to expand...
Click to collapse
Oh okay thanks! Well i guess im off to use the stump root and use brute force
R0ck.em 5ock.em said:
I used ioroot with no problems. Check out this vid, pretty straight fwd on what you need to do.
sent from my VZW VS985 aka LG G3
Click to expand...
Click to collapse
how were you able to use ioroot with yours? Like when i tried to use it it would just close the batch file and wouldnt even work when i tried it.
ToF_Itachi said:
Oh okay thanks! Well i guess im off to use the stump root and use brute force
Click to expand...
Click to collapse
My pleasure Hope you can find root using the desired software.. I'm in Korea..using the F400k but the latest update (v10l) couldn't find root using any of the available tools.. so.. I had to downgrade to the previous (v10g) and got root again. :victory:
Showtek1980 said:
My pleasure Hope you can find root using the desired software.. I'm in Korea..using the F400k but the latest update (v10l) couldn't find root using any of the available tools.. so.. I had to downgrade to the previous (v10g) and got root again. :victory:
Click to expand...
Click to collapse
Yeah im using the Verizon Vs985 v with the 10B version. so for me idk which way to go when it comes to rooting software
After you clicked to continue in the batch file, did yout phone boot into recovery?
sent from my VZW VS985 aka LG G3
ToF_Itachi said:
Yeah im using the Verizon Vs985 v with the 10B version. so for me idk which way to go when it comes to rooting software
Click to expand...
Click to collapse
This has ALWAYS worked well for me (Besides with the latest version update)... But I don't know if it would work on your device.. Try what you have. If all fails then give this a shot
R0ck.em 5ock.em said:
After you clicked to continue in the batch file, did yout phone boot into recovery?
sent from my VZW VS985 aka LG G3
Click to expand...
Click to collapse
no the batch file simply closed on me while my phone sat there still on the home screen
Hi Guys i have LG G3 D851 ..i am currently on MM i want to downgrade to lollipop so i downloaded the kdz file V20e but the problem is that LGUP cannot detect my G3 shows the device as unknown model but correctly shows the comports i even tried using LGFlash tool used seems that i cannot downgrade shows error and stops so i wanna know is there any way to fix this unknown model in LGUP ...
Guess no one wants to help here ?? To anyone else who has this issue u may need to change the buildprop file and ur phone must be rooted it still doesnt shows as unknown in LGUP but since i have rooted my phone n bought a new battery and installed xposed and im having a good battery life i still want to know why it aint showing up in LGUP
jinderation said:
Guess no one wants to help here ?? To anyone else who has this issue u may need to change the buildprop file and ur phone must be rooted it still doesnt shows as unknown in LGUP but since i have rooted my phone n bought a new battery and installed xposed and im having a good battery life i still want to know why it aint showing up in LGUP
Click to expand...
Click to collapse
Did you ever resolve this problem? The same thing is happening to me.
dant3ch said:
Did you ever resolve this problem? The same thing is happening to me.
Click to expand...
Click to collapse
i think D851 doesnt support LGUPdirect mthod thats what i figure but u can go back via tot method to lollipop or kitkat...im still using MM with custom rom
jinderation said:
i think D851 doesnt support LGUPdirect mthod thats what i figure but u can go back via tot method to lollipop or kitkat...im still using MM with custom rom
Click to expand...
Click to collapse
Try this dll it works..
https://drive.google.com/file/d/0B0VrTZddvLF7b3Q1b1BlQ2w0clE/view
Salik Iqbal said:
Try this dll it works..
https://drive.google.com/file/d/0B0VrTZddvLF7b3Q1b1BlQ2w0clE/view
Click to expand...
Click to collapse
is there somehow can u install this dll ? i dont somehow know it ?
jinderation said:
is there somehow can u install this dll ? i dont somehow know it ?
Click to expand...
Click to collapse
Dont install it.. use it with flashtool as dll and tot for ur model.. old flashtool way
Salik Iqbal said:
Dont install it.. use it with flashtool as dll and tot for ur model.. old flashtool way
Click to expand...
Click to collapse
i cant seem to flash via lgflashtool 2014 cuz it needs kdz n in TWRP u need .zip file...what other flashing method is available?
jinderation said:
i cant seem to flash via lgflashtool 2014 cuz it needs kdz n in TWRP u need .zip file...what other flashing method is available?
Click to expand...
Click to collapse
The only flashing method that has ever worked for me when my phone was bricked along with Corrupted recovery is the .TOT method. And that I'm afraid is the one from where you have to start all over from Out of the box experience with 4.4 Kitkat. If the LGFlashTool2014 does not work for you, I recommend the LGFlashtoolv1.8.1 + the crack. It will not ask you for the KDZ and should allow you to downgrade without any hassle.
There are 2 things you will need:
LGD851AT-01-V10c.zip & LGFLASHv160.dll
This will point you in the right direction. Just scroll down to the text where it says "2014 TOT Method (Old/Outdated)"
http://forum.xda-developers.com/showthread.php?t=2785089
Good luck
jinderation said:
Guess no one wants to help here ?? To anyone else who has this issue u may need to change the buildprop file and ur phone must be rooted it still doesnt shows as unknown in LGUP but since i have rooted my phone n bought a new battery and installed xposed and im having a good battery life i still want to know why it aint showing up in LGUP
Click to expand...
Click to collapse
its dll you must download this one LGUP_8974.dll " LGUP_8974_8084_DLL_Ver_0_3_17_6.msi "
Hi guys,I'm a Chinese ,I found this dll in Chinese forum ,but it's difficult to download,thank you !! and I'll take this
Solution to LGUP LG G3 unknown
While an old thread, it'll be found in searches. For anybody who gets "UNKNOWN" device with LGUP for the LG G3, I found that LGUP for the G3 is often distributed with the wrong DLL file. See the details here, post #11.
HTH
LGUP worked with my LG G3 D851 when I used it as in this tutorial:
LG G3 LineageOS Tutorial - Linus Tech Tips
So i know most people are going to say to use the search feature, but i cant find any indisputable post that specifically talks about my model of phone. I have the LG G4 US991 on 21a. I bought it on amazon unlocked, and use it with AT&T. Its currently on 6.0. Im hoping that at a bare minimum there is a root method for this phone. Thanks for your help!
IgnitionIWNL said:
So i know most people are going to say to use the search feature, but i cant find any indisputable post that specifically talks about my model of phone. I have the LG G4 US991 on 21a. I bought it on amazon unlocked, and use it with AT&T. Its currently on 6.0. Im hoping that at a bare minimum there is a root method for this phone. Thanks for your help!
Click to expand...
Click to collapse
For root downgrade to LL. No root on MM for locked devices.
For downgrade check if you have anti rollback (search for the code of the secret menu) which avoids downgrading.
For a limited TWRP you need root (search for TWRP in FIsH)
.
Sent from my LG-H815 using XDA Labs
steadfasterX said:
For root downgrade to LL. No root on MM for locked devices.
For downgrade check if you have anti rollback (search for the code of the secret menu) which avoids downgrading.
For a limited TWRP you need root (search for TWRP in FIsH)
.
Sent from my LG-H815 using XDA Labs
Click to expand...
Click to collapse
Ive tried almost every secret menu code and the only one that seems to work is the IMEI one. All the others return connection problem or invalid MMI code.
IgnitionIWNL said:
Ive tried almost every secret menu code and the only one that seems to work is the IMEI one. All the others return connection problem or invalid MMI code.
Click to expand...
Click to collapse
you can look up HiddenMenuCall apk and normally itll get into the hidden menus pretty good
install apk go down to drm and click on it then qfuse im using it on my g5 it dont tell me which qfuse version but it does tell me that qfuse drive exist
click qfuse check
mine says qfuse board dont download nonsecure images
http://storagecow.eu/Xda/LG G5/Sprint LS992 GSM unlock/HiddenMenuCall_1.7.apk
if ures comes back postive for qfuse existance be careful with what you downgrade hardbricks may result
TheMadScientist420 said:
you can look up HiddenMenuCall apk and normally itll get into the hidden menus pretty good
install apk go down to drm and click on it then qfuse im using it on my g5 it dont tell me which qfuse version but it does tell me that qfuse drive exist
click qfuse check
mine says qfuse board dont download nonsecure images
http://storagecow.eu/Xda/LG G5/Sprint LS992 GSM unlock/HiddenMenuCall_1.7.apk
if ures comes back postive for qfuse existance be careful with what you downgrade hardbricks may result
Click to expand...
Click to collapse
Ok got it installed, and my anti-rollback version is 2. Im assuming thats a bad thing?
IgnitionIWNL said:
Ok got it installed, and my anti-rollback version is 2. Im assuming thats a bad thing?
Click to expand...
Click to collapse
Now that means u cant install any firmware less than 2. So now u need to find what firmwares are 2 or higher. So downgrade and root are prob out of the question. If u dg to a version 1. U can hardbrick
TheMadScientist420 said:
Now that means u cant install any firmware less than 2. So now u need to find what firmwares are 2 or higher. So downgrade and root are prob out of the question. If u dg to a version 1. U can hardbrick
Click to expand...
Click to collapse
Anyway to upgrade to nougat on the g4 currently? And what options do i have for firmwares with v2?
IgnitionIWNL said:
Anyway to upgrade to nougat on the g4 currently? And what options do i have for firmwares with v2?
Click to expand...
Click to collapse
im not familiar with your models firmware but im pretty sure nougats not released yet on the g4 should be soon though
Dear fellow XDA members i bought an LG G4 H811 and when tried rooting it with no luck by pure luck i noticed that the serial number starts with ls991... Now the rom is 20R as a normal T-Mobile phone ... Anyone faced this issue before ? If so how do i root this phone ?
Thank you
empreror said:
Dear fellow XDA members i bought an LG G4 H811 and when tried rooting it with no luck by pure luck i noticed that the serial number starts with ls991... Now the rom is 20R as a normal T-Mobile phone ... Anyone faced this issue before ? If so how do i root this phone ?
Thank you
Click to expand...
Click to collapse
first you dont know what you have.. i suggest to open the phone and take out motherboard. see plaque model if it says h811 then you have h811 if its says ls9 then you have sprint.. thats the only way. they maybe edited software easy to do.. but you can not change model in plaque ..
raptorddd said:
first you dont know what you have.. i suggest to open the phone and take out motherboard. see plaque model if it says h811 then you have h811 if its says ls9 then you have sprint.. thats the only way. they maybe edited software easy to do.. but you can not change model in plaque ..
Click to expand...
Click to collapse
Thank you for the reply ... Now which one of them can i rely on to determine what to flash on it ... I wanna root the phone and get a custom rom on ... Ive tried to get it to go to the bootloader but it simply restarts without going for the bootloader and im not quite sure what i can do next.. Any tips ?
Sounds like a two part phone.
Has been refurbished..... Most likely sprint motherboard.....bad news
empreror said:
Thank you for the reply ... Now which one of them can i rely on to determine what to flash on it ... I wanna root the phone and get a custom rom on ... Ive tried to get it to go to the bootloader but it simply restarts without going for the bootloader and im not quite sure what i can do next.. Any tips ?
Click to expand...
Click to collapse
motherboard thats your variant
empreror said:
Dear fellow XDA members i bought an LG G4 H811 and when tried rooting it with no luck by pure luck i noticed that the serial number starts with ls991... Now the rom is 20R as a normal T-Mobile phone ... Anyone faced this issue before ? If so how do i root this phone ?
Thank you
Click to expand...
Click to collapse
Same issue here but my phone is a refurbished f500l
I suggest you to not customize anything because there is nothing good when it comes to customizing a refurbished phone even flashing official kdz just let it go or you would be in your worst case of customizing
But if you insist you may want to search about qualcomm 9008 mode a little
Best wishes.
shamescool said:
Same issue here but my phone is a refurbished f500l
I suggest you to not customize anything because there is nothing good when it comes to customizing a refurbished phone even flashing official kdz just let it go or you would be in your worst case of customizing
But if you insist you may want to search about qualcomm 9008 mode a little
Best wishes.
Click to expand...
Click to collapse
Thank you brother .. Im having a huge battery drain and im suspecting that its a bloatware issue .. How do i overcome this ?
empreror said:
Thank you brother .. Im having a huge battery drain and im suspecting that its a bloatware issue .. How do i overcome this ?
Click to expand...
Click to collapse
I have battery issues too its lg bloatwares but you should have root to modify system and remove crapware(some of them can be disabled through apps menu)
First,try some apps like kingo .etc and see if those apps work because king root worked for me when i had h811 10n rom however its super user app is nothing but bull****...it will do the trick on the other hand.
Second(which i really dont recommend),try low effort root and injecting rooted system with send command and adb search for it in this forum and you will find it.
What i strongly recommend is getting along with it
Because this phone does nt worth the hassle to modify any thing on it if you have a refurbished device
Peace✌
Hello amigos, just to clarify i'm new to XDA so lets get to it then shall we!
So I bought this LG G4 from a guy on eBay, and it basically just arrived today. So the weird thing about the device is, It has a Anti-Rollback Version 4. Ive personally never seen this especially in the UK. Isn't it just the US that's supposed to be effected by these issues???
Is there any way of getting around this or what ever?
Its on Android 6.0 and its the H815 variant, I've tried booting into the boot-loader and that doesn't work (Yes I've used ADB but that didn't work either I also used recovery which for some reason I can access but not the boot-loader ) This is the main issue. There is also something else that doesn't make any sense. The device has an update from LG, It downloads perfectly fine but when it goes to flash the update it just doesn't flash. It comes up with an error. That's all it says in the recovery, error. Yeah that's about it really. The phone works perfectly fine on 6.0 but I just wanted to see if one of the greight minds here could assist me with this issue or just upfront call me stupid for wasting my money on an old phone :laugh:.
Which H815 variant is it?
EU, USA, TR, Int'l?
LPCG7 said:
Which H815 variant is it?
EU, USA, TR, Int'l?
Click to expand...
Click to collapse
It looks to be the EU version to me. I cant be too sure though. Its running on the OPEN EU firmware though. (H81520D)
go to:
settings > about phone > hardware info
LPCG7 said:
go to:
settings > about phone > hardware info
Click to expand...
Click to collapse
Yes the model number is LG-H815. It doesn't say if its EU or INT or what ever.
Is this unusual?
Sileo2056 said:
Yes the model number is LG-H815. It doesn't say if its EU or INT or what ever.
Is this unusual?
Click to expand...
Click to collapse
That's on the page below. There it gives you software version....
mcduffie2010 said:
That's on the page below. There it gives you software version....
Click to expand...
Click to collapse
H81520D is the software version
you need to unlock the bootloader before accessing it first.
this is the only official way for so.
http://developer.lge.com/resource/mobile/RetrieveBootloader.dev
If I may ask to better assist you, what do you plan on doing exactly?
LPCG7 said:
you need to unlock the bootloader before accessing it first.
this is the only official way for so.
http://developer.lge.com/resource/mobile/RetrieveBootloader.dev
If I may ask to better assist you, what do you plan on doing exactly?
Click to expand...
Click to collapse
Firstly I plan on rooting and adding TWRP as I did on my old G3. I tried to use LG's method but it did not allow me to fastboot. When I used ADB it just well, restarted the phone. I used the command adb restart bootloader as it states on the unlocking site. I used administrative permissions. Whats unsual is, I can use adb restart recovery perfectly fine to get to the stock recovery.
The confusing thing for me is, the device has the antirollback version 4
Its the EU version of the H815. It makes no sense!!!!
I'm trying to figure out what could have caused this to happen mainly... The only version with antirollback version 4 is the LS991 ZVF... How is this even been done to this thing!? Its running on the H81520D firmware which 0 of them have the antirollback version 4 that i'm aware of. The bootloader is mysteriously inaccessible by anything I do! This is really bugging me now. Could this be a franken device?
Before proceeding further, check whether your device has SN 404 or other. It is found by removing your battery or checking on the box labels.
LPCG7 said:
Before proceeding further, check whether your device has SN 404 or other. It is found by removing your battery or checking on the box labels.
Click to expand...
Click to collapse
Nope it's sn 606....
Sileo2056 said:
Firstly I plan on rooting and adding TWRP as I did on my old G3. I tried to use LG's method but it did not allow me to fastboot. When I used ADB it just well, restarted the phone. I used the command adb restart bootloader as it states on the unlocking site. I used administrative permissions. Whats unsual is, I can use adb restart recovery perfectly fine to get to the stock recovery.
Click to expand...
Click to collapse
To begin with, I rooted mine by downgrading to LP stock rom as rooting MM is not quite easy using this link : https://forum.xda-developers.com/g4/help/how-downgrade-g4-h815-t3264864
Then I had FIsH twrp installed cause I couldn't unlock my BL using : https://forum.xda-developers.com/g4/development/locked-twrpinfish-locked-g4-devices-t3573048
>>ITS RISKY<<
Sileo2056 said:
The confusing thing for me is, the device has the antirollback version 4?
Click to expand...
Click to collapse
Secondly, yours has ARB v4. So there are some hardwork involved in finding a kdz that won't brick your G4 on flashing. As you say it is very much confusing. So do proceed ahead only after properly checking your informations and cross examining carefully.
LPCG7 said:
To begin with, I rooted mine by downgrading to LP stock rom as rooting MM is not quite easy using this link : https://forum.xda-developers.com/g4/help/how-downgrade-g4-h815-t3264864
Then I had FIsH twrp installed cause I couldn't unlock my BL using : https://forum.xda-developers.com/g4/development/locked-twrpinfish-locked-g4-devices-t3573048
>>ITS RISKY<<
Secondly, yours has ARB v4. So there are some hardwork involved in finding a kdz that won't brick your G4 on flashing. As you say it is very much confusing. So do proceed ahead only after properly checking your informations and cross examining carefully.
Click to expand...
Click to collapse
Many people are saying the H81520P KDZ file will work for me, apparently once I install it onto the device downgrading is pretty simple.
As for FIsH, eh... I cant figure it out at all. I was so confused by looking at the page for it, I was like eh...
EDIT: Every time I try to upload the KDZ to the device I get this. https://www.leonf.elhs.co/images/LGUP_05-01-18_11-50AM.png
Sileo2056 said:
Many people are saying the H81520P KDZ file will work for me, apparently once I install it onto the device downgrading is pretty simple.
As for FIsH, eh... I cant figure it out at all. I was so confused by looking at the page for it, I was like eh...
EDIT: Every time I try to upload the KDZ to the device I get this. https://www.leonf.elhs.co/images/LGUP_05-01-18_11-50AM.png
Click to expand...
Click to collapse
Installing FIsH is confusing at first...ask me more about it but with proper reading and carefully executing the steps you should be doing great:good:
This common error may be fixed by updating your LGUP DLL file. follow the first steps on https://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803
LPCG7 said:
Installing FIsH is confusing at first...ask me more about it but with proper reading and carefully executing the steps you should be doing great:good:
This common error may be fixed by updating your LGUP DLL file. follow the first steps on https://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803
Click to expand...
Click to collapse
Hurah, we are getting somewhere. Im now getting flashing fail and its not restating the device with that DLL!
Sileo2056 said:
Hurah, we are getting somewhere. Im now getting flashing fail and its not restating the device with that DLL!
Click to expand...
Click to collapse
You followed the steps as said to the letter?
LPCG7 said:
Installing FIsH is confusing at first...ask me more about it but with proper reading and carefully executing the steps you should be doing great:good:
This common error may be fixed by updating your LGUP DLL file. follow the first steps on https://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803
Click to expand...
Click to collapse
Yes i'm following the instructions to the letter. with LGUP. Still getting the error though.
is your phone restarting?
LPCG7 said:
is your phone restarting?
Click to expand...
Click to collapse
What happens is, follow the instructions on that LGUP thread that you sent me, I put the kdz in and restart lgup and then its on refurbish. I click start and the antirollback error appears on any KDZ I use apart from the H81520p_00_0314 which kicks out a Flash Fail error. Oh and thanks for helping me with this!