Related
CWM RECOVERY FOR THE KARBONN A18!!
Hey guys!! Finally i ported the ClockWorkMod ICS recovery (non-touch) onto our device!!
For people who dont know what CWM recovery and its benefits are, read this -> http://www.addictivetips.com/mobile/what-is-clockworkmod-recovery-and-how-to-use-it-on-android-complete-guide/
So, here are the steps on getting the CWM on Karbonn A18-
What you need
1. Karbonn A18, data usb cable.
2. Download the CWM recovery image file from the attachment below this post.
3. Download SP Flash Tool from my another post -> http://forum.xda-developers.com/attachment.php?attachmentid=1353992&d=1348592592
4. Download MTK6575 Driver from -> http://forum.xda-developers.com/attachment.php?attachmentid=1353943&d=1348591411
5. Download the MTK6575 Scatter.txt file from the attachment below this post.
Installation Steps-
1. Unzip and Install the MTK6575 USB drivers on your Windows PC, just run setup.exe.
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2. Copy the CWM recovery file that you downloaded from my attatchment. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5. Click on Options, check USB mode.
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your downloaded scatter.txt file. By default you will have only one map file of name MT6575_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked. Now click on the "RECOVERY" just right to the checkbox and browse and select the cwm.img file you downloaded from the attachment below.
9. Now click on "Download" on the Application or press F9 on keyboard. Warning messages will occur, but ignore them..
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Down button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
BUGS / Not functioning features :
Backing up the data not working
USB mount SDCARD through recovery not working
Credits:
I, Me & Myself..
EDIT:
i have tried removing some bugs, try and tell me u all!!!
I have also included the stock recovery.img file in the attatchment for people who want the stock recovery.
********************Anyone having problems can flash the cwm using the mobile uncle tools application....download that from the play store!*********************
..& hey plz if u think i deserve thanks then don't forget to thank me by pressing the thanks button below :victory:
Good Job done
Built from source or using web builder?
i cant flash this through sp - tool
vshlkmr said:
CWM RECOVERY FOR THE KARBONN A18!!
Hey guys!! Finally i ported the ClockWorkMod ICS recovery (non-touch) onto our device!!
For people who dont know what CWM recovery and its benefits are, read this -> http://www.addictivetips.com/mobile/what-is-clockworkmod-recovery-and-how-to-use-it-on-android-complete-guide/
So, here are the steps on getting the CWM on Karbonn A18-
What you need
1. Karbonn A18, data usb cable.
2. Download the CWM recovery image file from the attachment below this post.
3. Download SP Flash Tool from my another post -> http://forum.xda-developers.com/attachment.php?attachmentid=1353992&d=1348592592
4. Download MTK6575 Driver from -> http://forum.xda-developers.com/attachment.php?attachmentid=1353943&d=1348591411
5. Download the MTK6575 Scatter.txt file from the attachment below this post.
Installation Steps-
1. Unzip and Install the MTK6575 USB drivers on your Windows PC, just run setup.exe.
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2. Copy the CWM recovery file that you downloaded from my attatchment. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5. Click on Options, check USB mode.
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your downloaded scatter.txt file. By default you will have only one map file of name MT6575_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked. Now click on the "RECOVERY" just right to the checkbox and browse and select the cwm.img file you downloaded from the attachment below.
9. Now click on "Download" on the Application or press F9 on keyboard. Warning messages will occur, but ignore them..
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Down button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
Credits:
I, Me & Myself..
..& hey plz if u think i deserve thanks then don't forget to thank me by pressing the thanks button below :victory:
Click to expand...
Click to collapse
while downloading i got the error
reach2dinu said:
while downloading i got the error
Click to expand...
Click to collapse
First Check if the MTK drivers are installed, check it by going tinto the device managers hardware section in my computer
If it is proper then try connecting your phone without the battery inserted
Same problem..
reach2dinu said:
while downloading i got the error
Click to expand...
Click to collapse
I'm facing the same problem.. I tried with battery in and out.. have installed the drivers as well..
i ported this recovery from a ZOPO Z900 Leader chinese android handset...i tried building from source, but i failed at it because of partition style in a18...
For people facing problems flashing it through sp tools, u all can try to flash it using another pc or alternatively view this youtube video -> http://www.youtube.com/watch?v=969xwsUTkSY
ujjwalk308 said:
I'm facing the same problem.. I tried with battery in and out.. have installed the drivers as well..
Click to expand...
Click to collapse
Same problem here.
Anyone having problems can flash the cwm using the mobile uncle tools application....download that from the play store!
vshlkmr said:
Anyone having problems can flash the cwm using the mobile uncle tools application....download that from the play store!
Click to expand...
Click to collapse
Ok.now waiting for the bugfix.
reach2dinu said:
while downloading i got the error
Click to expand...
Click to collapse
always usb cable error
Connect usb cable & discconet auto & charging mode
this is usb driver ????
great job. im a noob at this so will try after people posting have successfully ported the cwm to their phone
There are two recovery.img files in your attachments. recovery.img and cwmfinal.img. Which one should be used in sp flash tool?
I recently purchased Karbonn a21, can I try this on it?
Sent from my GT-I9300 using xda app-developers app
Thnx bro worked like a charm.
Sent from my Karbonn_A18 using xda app-developers app
fail root
plz send device manager screen shot
Can anyone please upload stock rom of karbonn a18. My device stock at boot animation screen.
Sent from my GT-P1000 using xda premium
reach2dinu said:
while downloading i got the error
Click to expand...
Click to collapse
same problem any help pz
Cwm flashed
I have successfully installed cwm on my karbonn a18.
I did it wit the help of mobileunckle tools.
What are the next motives now??
1) can we change the battery indicator at the notification area to percentage signs?
vshlkmr said:
CWM RECOVERY FOR THE KARBONN A18!!
Hey guys!! Finally i ported the ClockWorkMod ICS recovery (non-touch) onto our device!!
For people who dont know what CWM recovery and its benefits are, read this -> http://www.addictivetips.com/mobile/what-is-clockworkmod-recovery-and-how-to-use-it-on-android-complete-guide/
So, here are the steps on getting the CWM on Karbonn A18-
What you need
1. Karbonn A18, data usb cable.
2. Download the CWM recovery image file from the attachment below this post.
3. Download SP Flash Tool from my another post -> http://forum.xda-developers.com/attachment.php?attachmentid=1353992&d=1348592592
4. Download MTK6575 Driver from -> http://forum.xda-developers.com/attachment.php?attachmentid=1353943&d=1348591411
5. Download the MTK6575 Scatter.txt file from the attachment below this post.
Installation Steps-
1. Unzip and Install the MTK6575 USB drivers on your Windows PC, just run setup.exe.
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2. Copy the CWM recovery file that you downloaded from my attatchment. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5. Click on Options, check USB mode.
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your downloaded scatter.txt file. By default you will have only one map file of name MT6575_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked. Now click on the "RECOVERY" just right to the checkbox and browse and select the cwm.img file you downloaded from the attachment below.
9. Now click on "Download" on the Application or press F9 on keyboard. Warning messages will occur, but ignore them..
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Down button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
BUGS / Not functioning features :
Backing up the data not working
USB mount SDCARD through recovery not working
Credits:
I, Me & Myself..
EDIT:
i have tried removing some bugs, try and tell me u all!!!
I have also included the stock recovery.img file in the attatchment for people who want the stock recovery.
********************Anyone having problems can flash the cwm using the mobile uncle tools application....download that from the play store!*********************
..& hey plz if u think i deserve thanks then don't forget to thank me by pressing the thanks button below :victory:
Click to expand...
Click to collapse
will you please give CWM for Micromax A90 specification maybe same as A18
here is Specification
Micromax A90
Super Amoled Plus LCD with 262 k
MTK6575 CPU 1 Ghz
512 MB RAM (350 - 400) User available
512 MB ROM ( its not RAM ) for apps
2.5 GB external SD for media file ( Music/Video,,,etc.)
8 Mega Pixel Camera + 0. Mega Pixel Front Camera
Android OS 4.0.3
with Rooted cell
plz help us to create new CWM + Custom ROM
also its same specification from some Chinese Brand like Zoppo / Hero / Gionnee / HDC
plz help.
Pritesh.mohan said:
I have successfully installed cwm on my karbonn a18.
I did it wit the help of mobileunckle tools.
What are the next motives now??
1) can we change the battery indicator at the notification area to percentage signs?
Click to expand...
Click to collapse
You could do that before flashing Cwm aswell.. Use rom toolbox.. I did it the day I got this phone
Hello,
I've update my Nokia X in new update official (1.2.4.1 & plateforms 1.2) -> update is ok BUT, when i connected my phone on my PC, drivers are not recognized ... :/ .... so i found with web (fb group )
1- Download this How to root without drivers
2 - Copy UPDATE-SuperSU-v2.01.zip in your SD card or internal memory (folder Download for exemple)
3 - Boot into bootloader :
a) switch off your phone
b) then press power and volum down and when your device vibrates release the power button ONLY (no volum down)
c) after 15second release the volume down and connect your phone on USB (PC)
d) click on recovery.bat (folders download) : a command prompt will open,and after closed or whrite "done" -> disconnect your phone
e) remove battery and reinsert battery
f) boot into recovery (power + volum up) and flash UPDATE-SuperSU-v2.01.zip next reboot ...
.. and now, your device is root ... you can swap memory extern for exemple ... no need USB drivers
(NB : after this operation all OK, but USB drivers no found .. so wait for this ...)
i'll try this one
yoann44 said:
Hello,
I've update my Nokia X in new update official (1.2.4.1 & plateforms 1.2) -> update is ok BUT, when i connected my phone on my PC, drivers are not recognized ... :/ .... so i found with web (fb group )
1- Download this How to root without drivers
2 - Copy UPDATE-SuperSU-v2.01.zip in your SD card or internal memory (folder Download for exemple)
3 - Boot into bootloader :
a) switch off your phone
b) then press power and volum down and when your device vibrates release the power button ONLY (no volum down)
c) after 15second release the volume down and connect your phone on USB (PC)
d) click on recovery.bat (folders download) : a command prompt will open,and after closed or whrite "done" -> disconnect your phone
e) remove battery and reinsert battery
f) boot into recovery (power + volum up) and flash UPDATE-SuperSU-v2.01.zip next reboot ...
.. and now, your device is root ... you can swap memory extern for exemple ... no need USB drivers
(NB : after this operation all OK, but USB drivers no found .. so wait for this ...)
Click to expand...
Click to collapse
Fixed the adb drivers though: http://forum.xda-developers.com/nokia-x/general/fix-updated-adb-drivers-nokia-x-v1-2-4-1-t2835827
Still, nice job.
Dom3616 said:
Fixed the adb drivers though: http://forum.xda-developers.com/nokia-x/general/fix-updated-adb-drivers-nokia-x-v1-2-4-1-t2835827
Still, nice job.
Click to expand...
Click to collapse
when i try to install the .zip file .it say installation aborted?anyone?help please?578
Can't enter to Bootloader mode
yoann44 said:
Hello,
I've update my Nokia X in new update official (1.2.4.1 & plateforms 1.2) -> update is ok BUT, when i connected my phone on my PC, drivers are not recognized ... :/ .... so i found with web (fb group )
1- Download this [....]
2 - Copy UPDATE-SuperSU-v2.01.zip in your SD card or internal memory (folder Download for exemple)
3 - Boot into bootloader :
a) switch off your phone
b) then press power and volum down and when your device vibrates release the power button ONLY (no volum down)
c) after 15second release the volume down and connect your phone on USB (PC)
d) click on recovery.bat (folders download) : a command prompt will open,and after closed or whrite "done" -> disconnect your phone
e) remove battery and reinsert battery
f) boot into recovery (power + volum up) and flash UPDATE-SuperSU-v2.01.zip next reboot ...
.. and now, your device is root ... you can swap memory extern for exemple ... no need USB drivers
(NB : after this operation all OK, but USB drivers no found .. so wait for this ...)
Click to expand...
Click to collapse
I can't enter Bootloader mode.. it just nokia logo only for long time...
cheppimme said:
I can't enter Bootloader mode.. it just nokia logo only for long time...
Click to expand...
Click to collapse
Flash stock rom. You did something wrong.
Sent from my Nokia_X using XDA Free mobile app
I'm confused.
Dom3616 said:
Flash stock rom. You did something wrong.
Click to expand...
Click to collapse
Can you tell me more how to do for details?
cheppimme said:
Can you tell me more how to do for details?
Click to expand...
Click to collapse
Search Nokia X General section.
error
Mr.MadScientist said:
Hello.
Me too.
I can not install your update.
I allocated it into the sd card, I started the recovery, but it gave me out "installation aborted" .
I tried to install the cwm recovery with nokia x manager (with the right drivers and everything as you said), but the process hangs at nokia initial logo , and is necessary to remove the battery (after 60 min) for restart the phone. Nokia flash , however, if I try to install it on windows professional 32 bit ( the only windows I have, because I use linux) , tell "is not an application for 32-bit" .
Thanks for your work.
Click to expand...
Click to collapse
Then goto CWM Recovery Thread for Nokia X and learn how to manually flash it.
The update package won't work on Stock Recovery.
Dom3616 said:
Then goto CWM Recovery Thread for Nokia X and learn how to manually flash it.
The update package won't work on Stock Recovery.
Click to expand...
Click to collapse
I apologize for my error but I had write on the wrong thread.
I have not tried the solution proposed here , I tried the solution proposed in the other thread, with the update 1.2.4.1 .
Unfortunately they were open both and I responded to the wrong one.
I hope you will forgive me and especially yoann44 .
I can not download the package because i think that in my country is impossible to pay . I continue to put the code but says it is wrong.
Nor with safari or google chrome I can finish the procedure.
How can I do?
I don't understand about what are you saying, I think you phone is full brick if you are unable to enter in Bootloader Mod, so check your productcode and discribe you problem
Just Download and Follow the Guide from Below Links if you are able to enter in bootloader mode (Half Brick). Otherwise claim you warranty.
Nokia X Flasher are free by Devs.
Nokia X Offical Rom
selmopn said:
i'll try this one
Click to expand...
Click to collapse
and?
Ok now I tried it but without success.
I have done everything.
However :
1) "done" it never arrived even after half an hour
2 ) I repeated the operation
3 ) at the end everything is back (hopefully) normal without root
For me, this method does not work: installation aborted.
So you are removing some apps from system/app
Sent from my Nokia_X
adeebulrehman said:
So you are removing some apps from system/app
Sent from my Nokia_X
Click to expand...
Click to collapse
Yes, facebook , twitter and one drive .
It can be the cause?
If it is necessary I can do a factory reset ...
I do it?
Mr.MadScientist said:
Yes, facebook , twitter and one drive .
It can be the cause?
If it is necessary I can do a factory reset ...
I do it?
Click to expand...
Click to collapse
You can remove app the apps that you don't need.
[MOD][Flashable] Remove all Bloatware apps from system/app Partition within 2 Seconds
Attached is the flash able zip file read the instruction from above post and edit script file from attached as per you requirement.
I have removed Mix Radio, Music, Store, Launcher, Keyboard and replaced them with Google Ones
adeebulrehman said:
You can remove app the apps that you don't need.
[MOD][Flashable] Remove all Bloatware apps from system/app Partition within 2 Seconds
Attached is the flash able zip file read the instruction from above post and edit script file from attached as per you requirement.
I have removed Mix Radio, Music, Store, Launcher, Keyboard and replaced them with Google Ones
Click to expand...
Click to collapse
Thank you very much! But to be sure I 've done the factory reset and I will use after your precious advice , the apps have been restored , but the process does not work've done the factory reset, the apps have been restored, but the process does not work.
OK Try It, If you need help let me know
yoann44 said:
Hello,
I've update my Nokia X in new update official (1.2.4.1 & plateforms 1.2) -> update is ok BUT, when i connected my phone on my PC, drivers are not recognized ... :/ .... so i found with web (fb group )
1- Download this How to root without drivers
2 - Copy UPDATE-SuperSU-v2.01.zip in your SD card or internal memory (folder Download for exemple)
3 - Boot into bootloader :
a) switch off your phone
b) then press power and volum down and when your device vibrates release the power button ONLY (no volum down)
c) after 15second release the volume down and connect your phone on USB (PC)
d) click on recovery.bat (folders download) : a command prompt will open,and after closed or whrite "done" -> disconnect your phone
e) remove battery and reinsert battery
f) boot into recovery (power + volum up) and flash UPDATE-SuperSU-v2.01.zip next reboot ...
.. and now, your device is root ... you can swap memory extern for exemple ... no need USB drivers
(NB : after this operation all OK, but USB drivers no found .. so wait for this ...)
Click to expand...
Click to collapse
Why it's necessary to pay from software that is free form the autor's site?
The proposed solution isn't working on 1.2.4.1 is there another usefull solution to root?
joaofsantosj said:
Why it's necessary to pay from software that is free form the autor's site?
The proposed solution isn't working on 1.2.4.1 is there another usefull solution to root?
Click to expand...
Click to collapse
pay off? who said he had to pay ??? lol ... my tutorial is functional! anyway, there's no point really, because since then, the problem was corrected in USB drivers, so possibility via toolkit x or nokia manager ^^
Hi all, first time working with Samsung devices, so got noob question, please bear with me.
I'm currently on 4.2.2 stock.
How to:
1. Download ODIN 3.10.7 on a Windows OS
2. Choose your device package and flash it via ODIN :
https://www.androidfilehost.com/?w=files&flid=54013
3. Flash TWRP 3.0 recovery from ODIN or older version of TWRP :
https://www.androidfilehost.com/?w=files&flid=31895
Click to expand...
Click to collapse
I read from some searching that both device baseband package (from [2]) and TWRP (from [3]) is to be flashed via the AP section of ODIN.
My question is, if I would like to perform a backup of my current stock, can I just flash [2] and [3], then boot into recovery to do nandroid backup?
Will flashing [2] and [3] prevent the stock backup from booting afterwards, if I restore it?
no dont worry .flashing recovery just changes your current recovery into twrp. the second package is needed to be flashed in order that cm13 recognizes sim and baseband wont be unknown any more.
after flashing thise two you'll be able to work with your phone like before and yes you can get a nandroid backup of your current rom until you haven't wiped.
@darknessd31 thank you so much. I managed to get it to work.
Now I got one more problem - files as small as 7mb will give this error when opened:
"The file is too big to be open inside this device."
Click to expand...
Click to collapse
give some more information what format is it, what application do yo try to open the file with,is the file on sdcard?
Hi @vemoxy,
I'm facing the same error message ("The file is too big to be open inside this device") on an LG G3. Did you manage to find a solution to this?
Thanks!
danielmurphy said:
Hi @vemoxy,
I'm facing the same error message ("The file is too big to be open inside this device") on an LG G3. Did you manage to find a solution to this?
Thanks!
Click to expand...
Click to collapse
My Note 8 bricked, but if I remember correctly, restarting did the trick for me.
Hello Guys,
The issue is that i wanted to root my lenovo k8 note so follow this link "https://forum.xda-developers.com/android/development/tutorials-how-to-root-lenovo-k8-note-t3685502", Everything works file but in last rooting step no. 9
9. If you see internal storage 0mb Then GoTo Wipe and FORMAT DATA once & reboot to recovery
but in my device there has memory 59999mb so i ignored and reboot using twrp but it says no OS installed
and shows orange state, then i format phone using twrp but nothing happens again orange state and no os installed.
then i found another article with same issue "https://forum.xda-developers.com/android/help/lenovo-k8-note-stuck-boot-logo-flashing-t3751324/post75974342#post75974342" and found this
The bootlogo issue.
Hey! I read your post regarding your k8 note being stuck at the bootlogo.
Consider that you can still use TWRP, boot into it.
Then go ahead and download the SuperSU zip on your PC/laptop and connect your phone with a USB. You might be able to see the SD card folders on your PC, then you can just copy and paste it to the internal sd and flash it. You'll be good to go. If that doesn't work, in the TWRP Mode, go to advanced and select ADB sideload. You can now flash using ADB sideload.
Search for tutorials on ADB sideload. It's easy and that should work.
Click to expand...
Click to collapse
solution over there and flash supersu but nothing happens.
After so many try i locked oem bootloader in fastboot using command "fastboot oem lock", after this my lenovo k8 note show Red State.
Now i am not able to do anythig please help me out.
Basically my device is stuck at the bootloop with the
Red State
=> "Your Device has fail to pass verification and may not work properly
your device will boot in 10 sec trusted
Your device will boot in 5 seconds"
definitely I must have screwed up something.
Please help me to boot my Lenovo K8 note in normal mode.
Thanks
beingfhd said:
Hello Guys,
The issue is that i wanted to root my lenovo k8 note so follow this link "https://forum.xda-developers.com/android/development/tutorials-how-to-root-lenovo-k8-note-t3685502", Everything works file but in last rooting step no. 9
9. If you see internal storage 0mb Then GoTo Wipe and FORMAT DATA once & reboot to recovery
but in my device there has memory 59999mb so i ignored and reboot using twrp but it says no OS installed
and shows orange state, then i format phone using twrp but nothing happens again orange state and no os installed.
then i found another article with same issue "https://forum.xda-developers.com/an...-flashing-t3751324/post75974342#post75974342" and found this solution over there and flash supersu but nothing happens.
After so many try i locked oem bootloader in fastboot using command "fastboot oem lock", after this my lenovo k8 note show Red State.
Now i am not able to do anythig please help me out.
Basically my device is stuck at the bootloop with the
Red State
=> "Your Device has fail to pass verification and may not work properly
your device will boot in 10 sec trusted
Your device will boot in 5 seconds"
definitely I must have screwed up something.
Please help me to boot my Lenovo K8 note in normal mode.
Thanks
Click to expand...
Click to collapse
Are you okay with losing your data on your phone? If yes then go ahead and flash stock ROM with sp flash tool. And about your problem, I guess you wiped the /system partition as well that's why it was showing no os installed.
Another thing is that if you install twrp Do not boot up your phone, boot up into twrp by pressing volume up and power button at the same time you'll need to flash magisk or supersu so that twrp can modify partition correctly.
Thanks
Anas Rahman said:
Are you okay with losing your data on your phone? If yes then go ahead and flash stock ROM with sp flash tool. And about your problem, I guess you wiped the /system partition as well that's why it was showing no os installed.
Another thing is that if you install twrp Do not boot up your phone, boot up into twrp by pressing volume up and power button at the same time you'll need to flash magisk or supersu so that twrp can modify partition correctly.
Click to expand...
Click to collapse
Thanks for the reply but i recovered it using flash stock rom.
But i have another ques that can i flash twrp without oem unlock?
beingfhd said:
Thanks for the reply but i recovered it using flash stock rom.
But i have another ques that can i flash twrp without oem unlock?
Click to expand...
Click to collapse
No you can't
k8 note stuck on bootloop...??
need help.....my k8 note was running oreo....thn i downgraded to nougat...duo to bugs on oreo... thn i was facing more problems... so i decided to flash oreo again. ... i was trying to flash...but i was getting some brom error...so i thought it might be due to unlocked bootloader... so i tried to lock it.. and then try... and the system got deleted.... i cant even access fastboot... but device is detecting on sp flash tool... but getting the same error... help buddy... its urgent.. my device is not turning on... but the led is working....
DeepRBasak said:
need help.....my k8 note was running oreo....thn i downgraded to nougat...duo to bugs on oreo... thn i was facing more problems... so i decided to flash oreo again. ... i was trying to flash...but i was getting some brom error...so i thought it might be due to unlocked bootloader... so i tried to lock it.. and then try... and the system got deleted.... i cant even access fastboot... but device is detecting on sp flash tool... but getting the same error... help buddy... its urgent.. my device is not turning on... but the led is working....
Click to expand...
Click to collapse
This might be helpful https://forum.xda-developers.com/k8-note/how-to/lenovo-k8-note-xt1902-3-fix-dead-hard-t3791839
thank u somuch am also mobile sevice man it help full for me
Anas Rahman said:
Are you okay with losing your data on your phone? If yes then go ahead and flash stock ROM with sp flash tool. And about your problem, I guess you wiped the /system partition as well that's why it was showing no os installed.
Another thing is that if you install twrp Do not boot up your phone, boot up into twrp by pressing volume up and power button at the same time you'll need to flash magisk or supersu so that twrp can modify partition correctly.
Click to expand...
Click to collapse
I have the same problem. please help us!
HARDROCK2614 said:
I have the same problem. please help us!
Click to expand...
Click to collapse
What problem do you have, please describe
I have lost all my mind and need serious help.
Recently, the march update came. i forgot that rooted phone should not be updated by the OTA update. And i did. As a result i got stuck in a bootloop. Then I had to use the oreo ROM from this forum and flashed it using SP Flash tool. It was a successfull flash. Then I used Maui META to write the IMEI for both sim. That was successfull too(Wifi and bluetooth addresses were working by themselves and i didnt write the serial number of the phone).
After working nicely for three days, i was using Whatsapp and a friend of mine sent me a .pptx file (powerpoint presentation). I opened it using WPS office app. I opened it multiple times in morning with no problems. But in the afternoon at about 2.53 PM while i was in my car, i was unable to open the file. The phone hanged. It heated up. To get out of the hang, i restarted the phone using the power button. IT DID NOT START. All it showed was the lenovo logo screen. And after doing more restarts, the phone went completely blank.
Now i cannot start it, or charge it. So i thought of flashing it again. But when i connect it to my PC, it keeps CONNECTING and DISCONNECTING. what i saw in the device manager was that the driver keeps changing very fast betwee MTK USB PORT and PRELOADER.
I found the solution to be updating the drivers manually. I did. Now the driver shows only DA USB VCOM and when it changes, it goes invisible in the PC and then appears back. Now when i start flashing, the first red progress bar appears as: Download DA 100%. and the flash hangs. After some time, this error will popup: ERROR: STATUS_UNKNOWN_STORAGE_TYPE (0xC0040009)
Please someone help me.
custom619 said:
Recently, the march update came. i forgot that rooted phone should not be updated by the OTA update. And i did. As a result i got stuck in a bootloop. Then I had to use the oreo ROM from this forum and flashed it using SP Flash tool. It was a successfull flash. Then I used Maui META to write the IMEI for both sim. That was successfull too(Wifi and bluetooth addresses were working by themselves and i didnt write the serial number of the phone).
After working nicely for three days, i was using Whatsapp and a friend of mine sent me a .pptx file (powerpoint presentation). I opened it using WPS office app. I opened it multiple times in morning with no problems. But in the afternoon at about 2.53 PM while i was in my car, i was unable to open the file. The phone hanged. It heated up. To get out of the hang, i restarted the phone using the power button. IT DID NOT START. All it showed was the lenovo logo screen. And after doing more restarts, the phone went completely blank.
Now i cannot start it, or charge it. So i thought of flashing it again. But when i connect it to my PC, it keeps CONNECTING and DISCONNECTING. what i saw in the device manager was that the driver keeps changing very fast betwee MTK USB PORT and PRELOADER.
I found the solution to be updating the drivers manually. I did. Now the driver shows only DA USB VCOM and when it changes, it goes invisible in the PC and then appears back. Now when i start flashing, the first red progress bar appears as: Download DA 100%. and the flash hangs. After some time, this error will popup: ERROR: STATUS_UNKNOWN_STORAGE_TYPE (0xC0040009)
Please someone help me.
Click to expand...
Click to collapse
I couldn't find more about the problem online, can you please upload a screenshot of the error. Try using the latest version of SP Flash Tool and see if the problem persists
I have lost all my mind and need serious help.
here are the screenshots. Note that the battery is in the phone always because i am unable to open the back cover. During the flashing process, i did not press the vol - button.
https://ibb.co/sq8knnj
https://ibb.co/VjqKQm3
https://ibb.co/4VkVPjs
https://ibb.co/cw2BzLC
https://ibb.co/kcjjJ74
Now in the following screenshots, i kept the vol - button pressed down. Note that the driver is stuck at preloader and not DA. Also the first bar is yellow color in both these cases. However, in the above situation, multiple files were flashed. But in this below situation, only this so called "flash" was done; that too unsucessful in the end.
https://ibb.co/1QKtsCb
https://ibb.co/Ssj58Zd
custom619 said:
here are the screenshots. Note that the battery is in the phone always because i am unable to open the back cover. During the flashing process, i did not press the vol - button.
https://ibb.co/sq8knnj
https://ibb.co/VjqKQm3
https://ibb.co/4VkVPjs
https://ibb.co/cw2BzLC
https://ibb.co/kcjjJ74
Now in the following screenshots, i kept the vol - button pressed down. Note that the driver is stuck at preloader and not DA. Also the first bar is yellow color in both these cases. However, in the above situation, multiple files were flashed. But in this below situation, only this so called "flash" was done; that too unsucessful in the end.
https://ibb.co/1QKtsCb
https://ibb.co/Ssj58Zd
Click to expand...
Click to collapse
The problem may be with your drivers, i see you have Preloader drivers only.
Follow this guide for installing drivers - https://forum.xda-developers.com/elephone-m2/help/windows-10-mtk-vcom-usb-drivers-32-64-t3267033
Anas Rahman said:
The problem may be with your drivers, i see you have Preloader drivers only.
Follow this guide for installing drivers - https://forum.xda-developers.com/elephone-m2/help/windows-10-mtk-vcom-usb-drivers-32-64-t3267033
Click to expand...
Click to collapse
So i did as you said brother. I don' t know how but something happened. The phone, after a long time actually displayed up. It showed the LENOVO logo and down in the corner two things came in written :
>device unlocked
>Tool DL image Fail
I googled it up and found that it requires to flash the phone with the DA DL option ticked. I did that but it does not flash. The error is same as follows:
https://ibb.co/Ssj58Zd
Can you please guide me in the flashing process? I think the mistake is very small but i don't know where i am missing.
I have lost all my mind and need serious help.
custom619 said:
So i did as you said brother. I don' t know how but something happened. The phone, after a long time actually displayed up. It showed the LENOVO logo and down in the corner two things came in written :
>device unlocked
>Tool DL image Fail
I googled it up and found that it requires to flash the phone with the DA DL option ticked. I did that but it does not flash. The error is same as follows:
https://ibb.co/Ssj58Zd
Can you please guide me in the flashing process? I think the mistake is very small but i don't know where i am missing.
Click to expand...
Click to collapse
Okay so what i figured out is that in this state: (battery plugged in, no notification LED response, no response on power or volume buttons) the driver you require is MTK USB PORT.
I updated to this driver manually, and guess what? the phone actually flashed. But three files remained and the process hanged. (system, cache and userdata)
Now i get the errors:
>device unlocked
>Tool DL image Fail
and sometimes: >device otp failed
I am trying to flash the rest three files individually. Lets see what happens.
custom619 said:
Okay so what i figured out is that in this state: (battery plugged in, no notification LED response, no response on power or volume buttons) the driver you require is MTK USB PORT.
I updated to this driver manually, and guess what? the phone actually flashed. But three files remained and the process hanged. (system, cache and userdata)
Now i get the errors:
>device unlocked
>Tool DL image Fail
and sometimes: >device otp failed
I am trying to flash the rest three files individually. Lets see what happens.
Click to expand...
Click to collapse
Try flashing wihtout these three files, then boot to fastboot mode by pressing POWER+VOL UP and choose fastboot mode then flash these three files with fastboot commamds
Anas Rahman said:
Try flashing wihtout these three files, then boot to fastboot mode by pressing POWER+VOL UP and choose fastboot mode then flash these three files with fastboot commamds
Click to expand...
Click to collapse
I.AM.DUMBFOUNDED.
During flashing this error occurred:
(yellow bar in SPFlash tool)
[recovery] Download Flash 100%
ERROR: STATUS_MMC_ERR (0xC0040030)
[HINT]:
custom619 said:
I.AM.DUMBFOUNDED.
During flashing this error occurred:
(yellow bar in SPFlash tool)
[recovery] Download Flash 100%
ERROR: STATUS_MMC_ERR (0xC0040030)
[HINT]:
Click to expand...
Click to collapse
Couldn't find much about the error, give this a try
https://forum.xda-developers.com/k8-note/how-to/lenovo-k8-note-xt1902-3-fix-dead-hard-t3791839
ALSO, in the last few screenshots you're using firmware upgrade option please choose downlaod only.
Join the Telegram group more people can help there - -
Join «Lenovo XT1902-1/2/3 (K8 Series) Official Chat Group» on Telegram: https://t.me/K8Official
Anas Rahman said:
Couldn't find much about the error, give this a try
https://forum.xda-developers.com/k8-note/how-to/lenovo-k8-note-xt1902-3-fix-dead-hard-t3791839
ALSO, in the last few screenshots you're using firmware upgrade option please choose downlaod only.
Join the Telegram group more people can help there - -
Join «Lenovo XT1902-1/2/3 (K8 Series) Official Chat Group» on Telegram: https://t.me/K8Official
Click to expand...
Click to collapse
I Already tried this thread you suggested. No outcome.
Anas Rahman said:
Couldn't find much about the error, give this a try
https://forum.xda-developers.com/k8-note/how-to/lenovo-k8-note-xt1902-3-fix-dead-hard-t3791839
ALSO, in the last few screenshots you're using firmware upgrade option please choose downlaod only.
Join the Telegram group more people can help there - -
Join «Lenovo XT1902-1/2/3 (K8 Series) Official Chat Group» on Telegram: https://t.me/K8Official
Click to expand...
Click to collapse
This group is possibly dead. No one has responded till today...
READ EVERYTHING CAREFULLY!
1.Your phone warranty will be void after this tutorial!
2.Any small mistake and your phone is bricked/bootlooped!
3.All of your data will be lost so back it up somewhere
Click to expand...
Click to collapse
(Fixed the tutorial my bad.)
Click to expand...
Click to collapse
Hey Guys Im Back! Thank you for the support and how it blew up. I have tested this on Android 10 UI 2.0 and it works better then ever!
Also installed lineage os : https://forum.xda-developers.com/galaxy-a10/development/rom-lineage-os-a10-a105f-t4078093
So i tried using afaneh92's tutorial which will be linked here : https://forum.xda-developers.com/galaxy-a10/how-to/magisk-root-galaxy-a10-series-t3963822
Which lead to me bootlooping or softbricking and my storage was reduced from 32 gb to 16Gb so i decided to work on my own method!
Credits go to afaneh92 for the Twrp!
BEFORE YOU START YOU SHOULD HAVE
1.Samsung Drivers installed
2.Odin Installed
3.7zip Installed
4.A data transfer cable
5.A Proper working brain
If you have all of those lets start!
A: Phone settings
1.Go in settings>about phone>software information>build number tap that 5 times until it says "You are a developer now" then you will have Developer options unlocked
2.Then go in developer functions and find OEM unlocking tick that on scroll down until you see Usb Debugging and tick that also Disable Auto Updates option
B: Download TWRP and 2 other important files
1.Dial *#1234# and it will show the AP and some others, focus on AP paste it on google and get the download for it
2.After downloaded move the AP to your download folder in your android device
3.You will get a magisk_patched.tar after its been offically converted
4.Get the twrp for a10
Download the twrp file here : https://mega.nz/#!OU1WhSDZ!vQz5K1wpqBhg0hCD59aziaHPxFlUsT_2WG8SgT8p6iY
5.After you got everything open the .tar archive and extract vbmeta.img, boot.img and you should already have recovery.img on your Desktop
6.Grab all the 3 .img files and archive them into a .tar using 7zip, Now continue to step C,
C :Unlocking The Bootloader and Getting Into Download Mode (THE PART WHERE YOU RESET YOUR PHONE)
1.Turn Off your phone
1.2.Put your data cable into your PC(dont connect your phone to it yet)
1.3.Hold Volume Up and Down then insert the cable into your phone
1.4.When you see a bluescreen let go
1.5.Hold vol up until you see another screen then let go for 1 second and hold vol up again
2.Your device will reset itself and reboot
2.1.After the device has booted in into the setup take the cable out after Turn off your phone
2.2.Hold Vol Up and Down again and connect the cable
2.3.Let go when a blue screen appears then press vol up until you are in download mode
D: Flashing TWRP
1.Open Odin
2.Press on AP then find Desktop.tar and press open
3.Press start and let it do its thing
4.After your Phone has rebooted you oficially have TWRP installed
5.If you want to know hoe to root go to step E
E: Installing Magisk
Since magisk is counted as the best rooting option rn i will be using it in this tutorial(Sorry supersu fans)
1.Install Magisk Manager
2.Press on Install (first one) then press install again and after that press Install Zip Only
3.Then go into Twrp by doing the steps below
3.1.Turn off your device
3.2.Hold vol up and power button untill you see TWRP logo
4.Press install
4.1.Find magisk-v20.4(20400).zip
4.2Swipe right on the bottom to flash it then press reboot system now.
5.Now you have TWRP,Root and Magisk Congratulations!
What happens if something goes wrong.
1.SV Error Device 1 library 0 - You installed the wrong firmware look for the right firmware.To check go in recovery mode and look at the A105XXXXXX and then look for a download. Remider AP->AP BL->BL CP->CP HOME_CSC->CSC
2.vbmeta.img error - you have the wrong vbmeta.img file. Redownload the original firmware and take out the right vbmeta.img next time you try flashing. Reminder AP->AP BL->BL CP->CP HOME_CSC->CSC
3.A blue screen telling you to use samsung switch emergency update. That wont work so just flash the original firmware and try flashing twrp again.
4.When i try to boot in it gets me into TWRP - Thats just because that your data is corrupted and to fix it while in TWRP mode press wipe then swipe after its done press Reboot To System. That should be a fix
5.My internal storage is just full of weird numbers and I can't download anything on it! Go in TWRP then wipe,press advanced wipe, click on internal storage and data, swipe. That should fix the error
6.Boootlooping or Bricked! Installed corrupted firmware or the recovery was f-ed up. Then install the right firmware and redo the steps!
If you have issues during the process send it in the comment ill try to respond as fast as i can!
i notice thread title says exynos only.. u do know they are all exynos including a102u and a102u1 right?
Oh. Alright thanks for telling me.
Press on app? I have nothing in odin saying that, do you mean ap?
Edit: guess not....i'm bricked, stuck on galaxy logo, device not recognized by pc, holoding power button wont force reboot, nothing lol.
Edit2: can force reboot holding volume down and power but instantly stuck on logo again, cannot power off or enter download, nothing...bricked. Followed this guide to the letter. I assumed when you said app in odin you meant ap since there is no app button. My bootloader unlocked then I went to flash in odin the tar i made with patched boot and vbmeta, along with recovery linked. I used matching firmware to what my A10 has also. Would not mind if i could get back into download mode, but that looks impossible now.
Edit3: Managed to get download mode but had to be so quick...hopefully I can reflash stock now.
Cupcake 1.5 said:
Press on app? I have nothing in odin saying that, do you mean ap?
Edit: guess not....i'm bricked, stuck on galaxy logo, device not recognized by pc, holoding power button wont force reboot, nothing lol.
Edit2: can force reboot holding volume down and power but instantly stuck on logo again, cannot power off or enter download, nothing...bricked. Followed this guide to the letter. I assumed when you said app in odin you meant ap since there is no app button. My bootloader unlocked then I went to flash in odin the tar i made with patched boot and vbmeta, along with recovery linked. I used matching firmware to what my A10 has also. Would not mind if i could get back into download mode, but that looks impossible now.
Edit3: Managed to get download mode but had to be so quick...hopefully I can reflash stock now.
Click to expand...
Click to collapse
Im sorry for that and yes i meant AP.
If you wanted to reboot you had to hold vol up vol down and power at the same time and you sure that you unlocked the bootloader and used the right firmware?
Also tell me the AP and from which source have you downloaded it :laugh:
cmz6996 said:
Im sorry for that and yes i meant AP.
If you wanted to reboot you had to hold vol up vol down and power at the same time and you sure that you unlocked the bootloader and used the right firmware?
Also tell me the AP and from which source have you downloaded it :laugh:
Click to expand...
Click to collapse
All sorted now, back on stock with twrp and root It was a schoolboy error by me, the firmware downloaded was corrupted lol.
Cupcake 1.5 said:
All sorted now, back on stock with twrp and root It was a schoolboy error by me, the firmware downloaded was corrupted lol.
Click to expand...
Click to collapse
Oh! Im happy to hear that!
Cupcake 1.5 said:
All sorted now, back on stock with twrp and root It was a schoolboy error by me, the firmware downloaded was corrupted lol.
Click to expand...
Click to collapse
Could you also tell me from where have you downloaded the corrupted firmware so i can warn the others?
cmz6996 said:
Could you also tell me from where have you downloaded the corrupted firmware so i can warn the others?
Click to expand...
Click to collapse
The corruption was my side, I was using a download manager, but when I downloaded through chrome it was all good. As I said, schoolboy error on my part for not checking md5. I used sammobile site for the firmware.
Cupcake 1.5 said:
The corruption was my side, I was using a download manager, but when I downloaded through chrome it was all good. As I said, schoolboy error on my part for not checking md5. I used sammobile site for the firmware.
Click to expand...
Click to collapse
Alr thanks.
Can you upload it to Mediafire? Mega marks a "temporal error"...
Kyua said:
Can you upload it to Mediafire? Mega marks a "temporal error"...
Click to expand...
Click to collapse
At me it works?
Works on a105m?
Axeggus said:
Works on a105m?
Click to expand...
Click to collapse
Yes
i receive message that i running samsumg not official firmware after odin install recovery.tar
not work
cmz6996 said:
So i tried using afaneh92's tutorial which will be linked here : https://forum.xda-developers.com/galaxy-a10/how-to/magisk-root-galaxy-a10-series-t3963822
Which lead to me bootlooping or softbricking and my storage was reduced from 32 gb to 16Gb so i decided to work on my own method!
Credits go to afaneh92 for the Twrp!
BEFORE YOU START YOU SHOULD HAVE
1.Samsung Drivers installed
2.Odin Installed
3.7zip Installed
4.A data transfer cable
5.A Proper working brain
If you have all of those lets start!
A: Phone settings
1.Go in settings>about phone>software information>build number tap that 5 times until it says "You are a developer now" then you will have Developer options unlocked
2.Then go in developer functions and find OEM unlocking tick that on scroll down until you see Usb Debugging and tick that also Disable Auto Updates option
B: Download Your firmware and TWRP
1.Go in your calls app and dial *#1234# Then You will receive some details about your AP, CP etc. look at the AP then download the firmware by searching it on google and (download it from sites like sammobile etc)
2.After you got your firmware connect your device to your pc after its connected send the entire firmware to the device in the Downloads folder
2.1. Install Magisk Manager
3.After you're in magisk manager press on install (first one) then press install again then press Select and Patch a File
3.1.Chose the firmware you saved on the Downloads folder
3.2.After you tap on it it should've already started modifying it
4.After it finished go back to your pc and move the magisk_patched.tar back to your desktop (It should be located in Downloads)
5.From the magisk_patched.tar extract boot.img and vbmeta.img to your desktop
5.1.Download the twrp file here : https://mega.nz/#!OU1WhSDZ!vQz5K1wpqBhg0hCD59aziaHPxFlUsT_2WG8SgT8p6iY
5.2.After recovery.img(TWRP) has been downloaded move it to your desktop
5.3.Select all those three items(vbmeta.img,recovery.img,boot.img) right click then Find 7Zip then press add to archive
5.4.Rename the Archive name to recovery.tar and make sure the archive format is .tar
6.After the Archive has been downloaded follow the steps in C
C :Unlocking The Bootloader and Getting Into Download Mode (THE PART WHERE YOU RESET YOUR PHONE)
1.Turn Off your phone
1.2.Put your data cable into your PC(dont connect your phone to it yet)
1.3.Hold Volume Up and Down then insert the cable into your phone
1.4.When you see a bluescreen let go
1.5.Hold vol up until you see another screen then let go for 1 second and hold vol up again
2.Your device will reset itself and reboot
2.1.After the device has booted in into the setup take the cable out after Turn off your phone
2.2.Hold Vol Up and Down again and connect the cable
2.3.Let go when a blue screen appears then press vol up until you are in download mode
D: Flashing TWRP
1.Open Odin
2.Press on AP then find recovery.tar and press open
3.Press start and let it do its thing
4.After your Phone has rebooted you oficially have TWRP installed
5.If you want to know hoe to root go to step E
E: Installing Magisk
Since magisk is counted as the best rooting option rn i will be using it in this tutorial(Sorry supersu fans)
1.Install Magisk Manager
2.Press on Install (first one) then press install again and after that press Install Zip Only
3.Then go into Twrp by doing the steps below
3.1.Turn off your device
3.2.Hold vol up and power button untill you see TWRP logo
4.Press install
4.1.Find magisk-v20.4(20400).zip
4.2Swipe right on the bottom to flash it then press reboot system now.
5.Now you have TWRP,Root and Magisk Congratulations!
What happens if something goes wrong.
1.SV Error Device 1 library 0 - You installed the wrong firmware look for the right firmware.To check go in recovery mode and look at the A105XXXXXX and then look for a download. Remider AP->AP BL->BL CP->CP HOME_CSC->CSC
2.vbmeta.img error - you have the wrong vbmeta.img file. Redownload the original firmware and take out the right vbmeta.img next time you try flashing. Reminder AP->AP BL->BL CP->CP HOME_CSC->CSC
3.A blue screen telling you to use samsung switch emergency update. That wont work so just flash the original firmware and try flashing twrp again.
4.When i try to boot in it gets me into TWRP - Thats just because that your data is corrupted and to fix it while in TWRP mode press wipe then swipe after its done press Reboot To System. That should be a fix
5.My internal storage is just full of weird numbers and I can't download anything on it! Go in TWRP then wipe,press advanced wipe, click on internal storage and data, swipe. That should fix the error
6.Boootlooping or Bricked! Installed corrupted firmware or the recovery was f-ed up. Then install the right firmware and redo the steps!
If you have issues during the process send it in the comment ill try to respond as fast as i can!
Click to expand...
Click to collapse
hi guy... very good guide but it not work for my galaxy a10 ....i only have unlock the bootloader... if i try to get patched recovery ... it not work.... i have device blocked black screen for samsung software... or i cant go recovery mode it say me a error of vbmeta)
andrea2o18 said:
hi guy... very good guide but it not work for my galaxy a10 ....i only have unlock the bootloader... if i try to get patched recovery ... it not work.... i have device blocked black screen for samsung software... or i cant go recovery mode it say me a error of vbmeta)
Click to expand...
Click to collapse
You installed the wrong fir.ware check your right firmware.
BlueFolks said:
i receive message that i running samsumg not official firmware after odin install recovery.tar
Click to expand...
Click to collapse
Be cause you modified the firmware ignore that message
have you fixed the storage reduced to 16gb problem?
I have a Samsung galaxy sm-a10. I've tried everything here, even combination files. The error I ALWAYS get is 'failed flashing ROM... OEM lock'
Of course I have unlocked OEM in developer options, but still I get this error in the bootloader.
Any ideas?