Develop Bugs

tab 3 10.1" 3G GT-P5200 4.4.2 stock and multiwindows

Hello gays,
I have got a Galaxy Tab 3 10.1" + 3G, GT-P5200
It's possible to use Xposed and XMultiWindows on and stock ROM 4.4.2?
There's someone that test xposed on P5200?
Thank you very much

campotino said:
Hello gays,
I have got a Galaxy Tab 3 10.1" + 3G, GT-P5200
It's possible to use Xposed and XMultiWindows on and stock ROM 4.4.2?
There's someone that test xposed on P5200?
Thank you very much
Click to expand...
Click to collapse
There is a module at Xposed installer named XMultiWindow. Download it , install and activate at the Xposed. It will work perfectly.

edsoedso said:
There is a module at Xposed installer named XMultiWindow. Download it , install and activate at the Xposed. It will work perfectly.
Click to expand...
Click to collapse
How I can root my tablet?
I have 4.4.2 stock firmware P5200XXUBNG2 and I follow this guide.
When I install "recovery.tar.md5", odin send to the Tablet PDA and write "Pass" but TWR there isn't.
Please, help me!

campotino said:
Hello gays,
I have got a Galaxy Tab 3 10.1" + 3G, GT-P5200
It's possible to use Xposed and XMultiWindows on and stock ROM 4.4.2?
There's someone that test xposed on P5200?
Thank you very much
Click to expand...
Click to collapse
For future reference, questions like this do NOT belong in development. Follow the guidelines. This thread should be in Q&A (it's also more likely to be answered there)
That being said, yes xposed works quite well on the p5200 with 4.4. As for XMultiWindows I have yet to test it on 4.4, but it worked quite well on 4.2 so give it a whirl. Worst case scenario it doesnt work and you have to uninstall the module.

campotino said:
How I can root my tablet?
I have 4.4.2 stock firmware P5200XXUBNG2 and I follow this guide.
When I install "recovery.tar.md5", odin send to the Tablet PDA and write "Pass" but TWR there isn't.
Please, help me!
Click to expand...
Click to collapse
How did you conclude that there is not the recovery? To go to recovery you have to push simultaneously volume up button, home button and power button. If you follow the guide to install the recovery and procedure to go to recovery correctly, everything will work.

edsoedso said:
How did you conclude that there is not the recovery? To go to recovery you have to push simultaneously volume up button, home button and power button. If you follow the guide to install the recovery and procedure to go to recovery correctly, everything will work.
Click to expand...
Click to collapse
It is not the first time. I know how to get in download mode.
I check auto-reboot on Odin and tablet reistall stock recovery automatically.
This is my error! :crying:
It's very importanto UNCHECK autoreboot
Now, my tablet is rooted

Xmultiwindos not work very well on tab 3 10.1 stock 4.4.2
I test xposed whit xmultiwindows on my device, tab 3 10.1" stock, rooted firmware 4.4.2; I'm sad! :crying:
Xmultiwindos not work very well on tab 3 10.1, it is unusable.
There are a few applications supported, and there are many rendering issues and back command not work on active windows...
I use usually stock multiwindows on galaxy note II and the differences are many, stability, efficienty, adaptability
I'd like try a port Rom to tab 3 8" whit samsung stock multiwindows. Is there?

[ROOT] [RECOVERY: TWRP] [GT-I9300I] [4.4.4] for Samsung Galaxy S3 Neo

ROOT & RECOVERY FOR GALAXY S3 NEO GT-I9300I (KitKat 4.4.4)
Since we have now our own dedicated forums for S3 Neo, I'm splitting the "official" thread in dedicated threads for everyone to find information more easily. This is the thread for root and recovery for KitKat 4.4.4. Enjoy!
Enjoy! :good:
Looking for 4.3? Click below:
http://forum.xda-developers.com/galaxy-s3-neo/development/root-samsung-galaxy-s3-neo-t2907186
======================================================================
Root & Recovery (TWRP) for KiKat 4.4.4 (GT-I9300I)
Thanks to m1x_fly and usv from 4pda.ru.
Please follow the easy steps below to root and install TWRP Recovery (2.7.1.0):
1 - Download and install the USB drivers for I9300I;
2 - Download Odin v3.09;
3 - Download TWRP from this post;
4 - Download (also from this post): Update SuperSU and Knox Removal Script and copy them to your SDCard;
5 - Flash TWRP via Odin;
6 - Boot into TWRP, go to Settings and disable "Enable screen timeout", then install Update SuperSU and Knox Removal Script;
7 - Reboot;
Done!

Cool! Thanks a lot!
Sent from my GT-I9301I

dont we hav twrp 2.8?

Sebin35 said:
dont we hav twrp 2.8?
Click to expand...
Click to collapse
Not for I9300I. :good:

How to update supersu? i try normal Mode and doesnt work

elton.de.nascimento said:
How to update supersu? i try normal Mode and doesnt work
Click to expand...
Click to collapse
After install, go to Play Store and download SuperSU from there and update the app. Then, try to update the binary.

christianrj said:
After install, go to Play Store and download SuperSU from there and update the app. Then, try to update the binary.
Click to expand...
Click to collapse
I did , but doesnt work. I have tô install old version 1.51 of super user and them update ON play store .
Tks

supersu me installation failed .... even if the root works ... solutions?

I got that issue with previous SuperSu on this topic ( 2.02 ) just got the most recent one from chainfire website and so far no problem !!! try it

ygor.almeida said:
I got that issue with previous SuperSu on this topic ( 2.02 ) just got the most recent one from chainfire website and so far no problem !!! try it
Click to expand...
Click to collapse
always from recovery? ... v2.14?

Yeah try with this one
http://forum.xda-developers.com/showthread.php?t=1538053
Yeah, always flash zip from recovery

cipo3282 said:
always from recovery? ... v2.14?
Click to expand...
Click to collapse
ok solved ... thanks.

hello i am confused becaus we have 2 version of NEO one are DUO and européan version are come with single sim reader and version are not some
galaxy NEO GT-I9300I
and europ version are GT-I9301I
can any one confirme that root and this recovery work on GT-I9301I thank you

spawk said:
hello i am confused becaus we have 2 version of NEO one are DUO and européan version are come with single sim reader and version are not some
galaxy NEO GT-I9300I
and europ version are GT-I9301I
can any one confirme that root and this recovery work on GT-I9301I thank you
Click to expand...
Click to collapse
Actually this root and recovery method doesn't work on GT-I9301l. It's just for the dual Sim model (I9300l).
There is another thread with what you are looking for.
Sent from my GT-I9301I using XDA Free mobile app

Hi
In case interested/relevant
Re: 6 - Boot into TWRP, go to Settings and disable "Enable screen timeout", then install Update SuperSU and Knox Removal Script;
After my flash, 'Enable screen timeout' was not enabled i.e. unticked, so nothing to do.
Best

This method trigger the knox warranty flag?
When I was in Android 4.3 I root the Neo using TowelRoot v1 and the knox flag was not trigger.

MagicianPe said:
This method trigger the knox warranty flag?
When I was in Android 4.3 I root the Neo using TowelRoot v1 and the knox flag was not trigger.
Click to expand...
Click to collapse
As stated on CF-root page by Chainfire this will trigger knox.
SEE HERE

bongski55 said:
As stated on CF-root page by Chainfire this will trigger knox.
SEE HERE
Click to expand...
Click to collapse
Then the TWRP-root method is similar to the CF-root, plus TWRP recovery. Thanks.

Hello, I want to root my GT9300I S3 Neo. I have learnt that there are two versions of s3 neo, one with 1.4quad core and another with 1.2, of which I have the latter. Can I flash this on my device safely?

can any one help me. i flashed the twrp file with odin in download mode. but when i boot in recovery mode after it loads android recovery. so i get signature error when trying to flash supersu.
i got through by flashing official firmware for my country and then following the steps posted by op.

5.02 to 5.1.1 OTA with root survival

I have a new in the box S6 with 5.02. Is there any way to root at 5.02 and have root survive the OTA factory update to 5.1.1? I've searched the forum and haven't seen any methods to do this.
Thanks,
WX

wxfreak said:
I have a new in the box S6 with 5.02. Is there any way to root at 5.02 and have root survive the OTA factory update to 5.1.1? I've searched the forum and haven't seen any methods to do this.
Thanks,
WX
Click to expand...
Click to collapse
5.1.1 is rootable now however i would hold out till TWRP is made for 5.1.1 if not rooting is currently pointless since you wont have a recovery

rhyme187 said:
5.1.1 is rootable now however i would hold out till TWRP is made for 5.1.1 if not rooting is currently pointless since you wont have a recovery
Click to expand...
Click to collapse
FYI, twrp 2.8.7. 1 was working for me on 5.1.1 before I Odin'd back to stock
sent from my S6 using tapatalk

I think if we could find flashables for the OTA we might be able to use flashify with everroot

rooted 5.0.2 to 5.1.1 update problems
I would like to put the romified rom on my device and I cannot seem to update to 5.1.1 OTA isn't working. Any ideas? Last time I used this forum to root a device I was on the G1 so it's been a long time, these new devices are rather tricky for me
I am getting an error saying that my system has been modified so I cannot get any OTA updates

captainrobb609 said:
I would like to put the romified rom on my device and I cannot seem to update to 5.1.1 OTA isn't working. Any ideas? Last time I used this forum to root a device I was on the G1 so it's been a long time, these new devices are rather tricky for me
I am getting an error saying that my system has been modified so I cannot get any OTA updates
Click to expand...
Click to collapse
Use ODIN and the OH1 TAR file from SAMMOBILE. That will bring you up to the most recent stock and baseband. Then Unikernel and TWRP and flash the ROM.
Steps and links to all that you need can be found here: http://forum.xda-developers.com/sprint-galaxy-s6/general/how-to-to-100-stock-root-t3075448

koop1955 said:
Use ODIN and the OH1 TAR file from SAMMOBILE. That will bring you up to the most recent stock and baseband. Then Unikernel and TWRP and flash the ROM.
Steps and links to all that you need can be found here: http://forum.xda-developers.com/sprint-galaxy-s6/general/how-to-to-100-stock-root-t3075448
Click to expand...
Click to collapse
Is this something i can do with a mac or do i need a windows?

captainrobb609 said:
Is this something i can do with a mac or do i need a windows?
Click to expand...
Click to collapse
Never done it with a mac, but here are instructions: http://techbeasts.com/2015/04/13/download-odin-jdoin3-mac/
Good luck.

koop1955 said:
Never done it with a mac, but here are instructions:
Good luck.
Click to expand...
Click to collapse
Thank you, y'all are very helpful, i remember now why i enjoy this forum so much, last question i seem to be getting mixed answers from is whether or not 5.1.1 has a root that doesn't trip knox on our phones

captainrobb609 said:
Thank you, y'all are very helpful, i remember now why i enjoy this forum so much, last question i seem to be getting mixed answers from is whether or not 5.1.1 has a root that doesn't trip knox on our phones
Click to expand...
Click to collapse
No. It does not. Rooting 5.11 WILL trip Knox.

G3 MM root?

Any idea when will the root be avalaible for android 6.0?

thefootadd said:
Any idea when will the root be avalaible for android 6.0?
Click to expand...
Click to collapse
yes this guy... http://forum.xda-developers.com/lg-g3/development/root-twrp-marshmallow-d855-30b-t3286268 managed to get a permanent working root method!

Root is now available, just rooted mine
1 download and install kingroot
2 download autorec for mm and install twrp
3 flash permissive kernel zip
4 install super su from playstore
5 reboot recovery and flash latest superSU beta zip
6 launch superSU it will ask to uninstall kingroot click ok
7 enjoy

internetjlmb said:
Root is now available, just rooted mine
1 download and install kingroot
2 download autorec for mm and install twrp
3 flash permissive kernel zip
4 install super su from playstore
5 launch superSU it will ask to uninstall kingroot, click ok
6 reboot recovery and flash latest superSU beta zip
7 enjoy
Click to expand...
Click to collapse
or you can just go to that page and donwload the whole pack because it is easier and hit the thanks button for the OP for his solution.

ilooze said:
or you can just go to that page and donwload the whole pack because it is easier and hit the thanks button for the OP for his solution.
Click to expand...
Click to collapse
I followed a tutorial from another page but probably same OP thanks for the link!

Thank you everyone

Help! The second point , it says wait for backup and then press M . cant press anything :/

thefootadd said:
Help! The second point , it says wait for backup and then press M . cant press anything :/
Click to expand...
Click to collapse
Before root with kingroot app. https://www.youtube.com/watch?v=5P3WYEz_Gm8

thefootadd said:
Help! The second point , it says wait for backup and then press M . cant press anything :/
Click to expand...
Click to collapse
Swipe the Marshmallow Picture up

Did it. It worked . thanks

It´s the only way to root?? Install KingRoot, bla bla bla???

alemones said:
It´s the only way to root?? Install KingRoot, bla bla bla???
Click to expand...
Click to collapse
For stock mm it is. It's not that difficult
G3 D855---ROM : Fulmics 5.3---Xposed

I know it s simple..but I would like another way to do..but it s the only one...

Is this method works for the verizon g3 too ?

Yeah G3 d852 Canadian model apply to this as well??

does it work with g3 f400s? Thanks

Kingroot not working with me ? i tried many time and always got no strategy available. I have lg g3 d855 on 30B

Root Google pixel 2 xl - android 11

Hello everyone
Please can you help me to root pixel 2 xl - android 11
And is there any custom rom with android 11

We could, but it's important to note that if you have a Verizon Pixel 2 XL, root is NOT POSSIBLE.
Anyway, assuming you have the correct P2XL, the rooting instructions we give here in the forums haven't changed appreciably since they were written. For Android 11, they still apply, with the caveat that you currently have to use the "Canary" version of Magisk (i.e. the development channel version of Magisk) in order for root to work.

How about ????

abughassan said:
How about ????
Click to expand...
Click to collapse
That' indicates you have a Google variant, not a Verizon variant. So you're good to go with unlocking your bootloader, etc.
You should delete that picture as it shows your CSN number.
Guides:
https://forum.xda-developers.com/pixel-2-xl/how-to/guide-unlock-flash-root-pixel-2-xl-t3702418
https://github.com/topjohnwu/Magisk

Thanks pro
After install magisk I can't boot system .. always reboot !!!!
How can fix it

abughassan said:
Thanks pro
After install magisk I can't boot system .. always reboot !!!!
How can fix it
Click to expand...
Click to collapse
Make sure you are using Canary Magisk Manager and flashing Canary Magisk.

Thank you very much for your help brothers
It's done

abughassan said:
Thank you very much for your help brothers
It's done
Click to expand...
Click to collapse
Awesome

abughassan said:
Thanks pro
After install magisk I can't boot system .. always reboot !!!!
How can fix it
Click to expand...
Click to collapse
Lughnasadh said:
Make sure you are using Canary Magisk Manager and flashing Canary Magisk.
Click to expand...
Click to collapse
Just to point out the obvious to @abughassan, but I thought I made the point @Lughnasadh brings up clear in my previous post. You must have missed it, but it's all good as you got things working.

@Strephon Alkhalikoi
yes pro .. you are right I didn't notice it .. that's my fault thank you very much for your help

Brothes :
Is it possible to change font on P2XL11 ??

abughassan said:
Brothes :
Is it possible to change font on P2XL11 ??
Click to expand...
Click to collapse
You are rooted now mate and android is full of possibilities. Search internet you will surely find a way.

@rajkatiyar07 : Thanks mate ... I tried many ways but it didn't succeed

abughassan said:
@rajkatiyar07 : Thanks mate ... I tried many ways but it didn't succeed
Click to expand...
Click to collapse
Check in magisk thread. I am not rooted now but if i remember correctly there were plenty fonts related modules.

Just not able to root my Pixel 2 XL running Android 11
Lughnasadh said:
Make sure you are using Canary Magisk Manager and flashing Canary Magisk.
Click to expand...
Click to collapse
Brother please help me out. I've tried everything but I am just unable to root my pixel 2 xl running the latest android version (11).
I tried patching the boot image with latest canary build and it always outputs an image file which is of 0 bytes.
Then I tried patching the boot image with latest magisk manager (not canary), it was able to output a file which was around 25 MB in size but flashing it always results in boot loop.
Finally, I tried to patch my boot image using some other device with magisk canary (latest) and the output image was about 25 MB in size but again after flashing it, the device goes into boot loop.
--UPDATE--
I was finally able to root my device by simply flashing the latest magisk zip file (v 21.0) via TWRP

MridulDR said:
--UPDATE--
I was finally able to root my device by simply flashing the latest magisk zip file (v 21.0)
Click to expand...
Click to collapse
Yes, just to clarify for others reading this, topjohnwu pushed Magisk 21 to the beta channel. It should be on the stable channel shortly, so there will soon be no need to deviate from the established rooting instructions we have in the forums.

abughassan said:
Thanks pro
After install magisk I can't boot system .. always reboot !!!!
How can fix it
Click to expand...
Click to collapse
I had that happen. Unfortunately, the only solution I found was to use the online Google flash tool and flash back to the previous install. Fortunately, it worked. I updated to 11 from there. I may leave it uprooted because currently the Pixel 2 XL is a backup phone and I don't need root currently.