Related
I bought a supposedly genuine battery off of Ebay that turned out to be a total bust. It doesn't fit well either as I can feel it shifting inside the phone. :crying:
Does anyone have any suggestions on good OPO 2 replacement batteries?
I actually bought 2 different ones (one from ebay and one from a different site). Both of which turned out to be bad. They worked but they lasted less than the original one. I ended up going back to the original. If yours' is tottaly dead, I suggest you just stick with whatever you've got and don't waste more money.
why don't you buy it from oneplus store?
leonalewis said:
why don't you buy it from oneplus store?
Click to expand...
Click to collapse
Because if you already knew, oneplus doesn't sell any replacement parts through their store, they only do repairs (which are expensive afaik)
Damn, guess I'll have to go back to the old one. I might try Amazon and see if they're better than ebay.
Thinking after 2 years it's time for a battery replacement, I ordered as well recently from Ebay waiting it to be delivered but not keeping my hopes high. I let you guys know if it turns out OK.
Edit: It's terrible. Overheats and charges really slow etc. Went back to the stock. Ordered another one. Will update.
Edit 2: Back again to stock.
same here guys.. got the phone for 20 months now and in winter I got huge battery drops....I'm just calling/email and the battery won't last for more then 8 hrs... this is crazy...
same here, bought two on ebay, both worse than the original.
Asked support where to get a original replacement, but they wouldn't tell, but offered to do the replacement for around 40 Euros. It took almost 5 weeks though, so if you have a spare phone, I'd advise to do the same, instead of trying to find a decent replacement somewhere....
Hi everyone, reviving this thread as the older our beloved op2 gets the more and more of us will be in a need of a replacement battery.
Now, did anyone have any luck finding an oem battery replacement somewhere else than OP support?
All the "originals" on eBay seem to be garbage.
Where to buy good battery? Anyone bought recently & is satisfied with the product?
shrimetal said:
Where to buy good battery? Anyone bought recently & is satisfied with the product?
Click to expand...
Click to collapse
before you start getting stuff from ebay and other questionable sources, ask OP how much will it cost you for THEM to replace it.
in my case, they are asking for 33 euros which is actually not bad at all. as a matter of facts, i am actually sending mine out for repair tomorrow. sure, i will have to live without my OP for like 2 weeks, but there is a guarantee i will get an original battery.
rule of a thumb - "original" batteries from ebay are ****
Jackill said:
before you start getting stuff from ebay and other questionable sources, ask OP how much will it cost you for THEM to replace it.
in my case, they are asking for 33 euros which is actually not bad at all. as a matter of facts, i am actually sending mine out for repair tomorrow. sure, i will have to live without my OP for like 2 weeks, but there is a guarantee i will get an original battery.
rule of a thumb - "original" batteries from ebay are ****
Click to expand...
Click to collapse
I agree. Charged the same. Like you said, will give it to service Centre.
Hi all, so I've bought one on ebay for like 15$ with tools set and so far so good, on one charge got like 1,5 - 2 days - average usage (calls, emails, toilet gaming) , but charging time is longer i think... keywords for ebay "Original NEW Battery BLP597 For OnePlus Two 2 With Nice Tools 3200mAh 3.8V"
I'm using it for 3rd week now...
I recently had my battery replaced by OP.
RMA created in the weekend.
Package shipped out on Tuesday evening (through UPS).
Delivered at the repair center on Wednesday, repair quote received (and paid) in the evening.
Repaired on Thursday morning and dispatched later that day.
Received back in my possession (UPS delivered) on Friday.
Sure, it was wiped, bootloader locked and flashed with OOS 3.6.1. but that was expected.
I have absolutely no reason to complain and I hereby officially regret all my previous attempts to get a "new" battery from ebay or other questionable sources for which I wasted more money than OP asked for: 33 EUR.
New battery immediately increased the SOT by 1 hour and i no longer face the issue i faced before which was: whenever the battery dropped to 30% i knew i had no more than half an hour left until the phone died.
So, if you need a new battery, save yourself the time and money and do it the same way. I would certainly recommend this to all european customers, like me.
mincaeuro said:
Hi all, so I've bought one on ebay for like 15$ with tools set and so far so good, on one charge got like 1,5 - 2 days - average usage (calls, emails, toilet gaming) , but charging time is longer i think... keywords for ebay "Original NEW Battery BLP597 For OnePlus Two 2 With Nice Tools 3200mAh 3.8V"
I'm using it for 3rd week now...
Click to expand...
Click to collapse
Hello, can you please install "accubatery" app from playstore and charge your phone from 1-100% without using it? It will show you a real estimate of your battery capacity. Post screenshots afterwards, I will buy that battery for sure if its close to an original new one. Thank you!
Hi, will install it, but not sure about the 0-100% as I need the phone for daily use..maybe during weekend
Y
mincaeuro said:
Hi, will install it, but not sure about the 0-100% as I need the phone for daily use..maybe during weekend
Click to expand...
Click to collapse
Thank you, the 0-100% is not that important, the bigger fraction of charge the better, you can install it now and it will measure your battery over time, the more charge sessions of over 20% the more accurate results it gives.
Hi so I've done it yesterday. See screenshots attached.
mincaeuro said:
Hi so I've done it yesterday. See screenshots attached.
Click to expand...
Click to collapse
That's actually very nice score, looks like a real oem battery or a very close one. New original. Batteries show around 90%-93% with that app. Buying one, thankyou.
Maybe this has been asked elsewhere... but facing the fact that mostly our only option here is 3rd party batteries... has anyone tried one of the two (or more?) Chinese 3800mAh batteries? One is called an HSABAT (maybe the company) and the other a Da Da Xiong.
Here's the HSABAT "New 3800mAh BLP597 Battery" (I am not recommending or dissing this! Just interested if someone's tried it!):
https://www.ebay.co.uk/itm/HSABAT-N...Oneplus-2-One-Plus-Two-Battery-p/202269516963
And here's the Da Da Xiong 3800mAh BLP597 Battery:
https://www.dhgate.com/store/product/da-da-xiong-3800mah-blp597-battery-for-oneplus/399378631.html
AGAIN... neither of these have been tested by me. I am wanting input from anyone who has tested them. I know we sometimes have opinions re China, many of those opinions bogus, but folks our phones were made there. So maybe these are good. And maybe they are a joke. I hope for input from someone who's tried 'em.
I kept my Note 7 from Verizon. I disabled Samsung's update app through ADB which prevented ALL of the device killing updates from ever even appearing. This is the second version Note 7, with the green battery charging icon, that I obtained after I brought my first Note 7 back for the first recall.
I have since used my Note 7 ever since, with zero problems of any kind. And I just ordered my new Note 9 to replace it, 512GB and 8GB RAM. Fantastic journey!!!
I'm going to keep m Note 7 and was wondering if any definitive solutions for replacing the battery ever emerged? My Note 7 is at the point where it's battery's capacity has simply diminished from normal use. I have every single battery sucking feature always enabled - high accuracy location scanning, etc. I get a few hours out of a full charge before I'm getting low, plus I get precipitous zeroing in cold weather. Like, the phone shuts off if I leave it in the front pocket of my jacket when downhill skiing, when the battery gets below 40%.
So, I *would* like to replace the battery at some point, for that issue. Will an FE battery just go into it as a direct replacement? I did buy an S8+ battery at one point, after reading that it looked like it would fit/work, but I never got around to trying it. And tonight I just read later that it supposedly won't fit/work. So, I was rewarded for my inaction, in that case
:good:
-John
Can you share your ROM?
johnpjackson said:
I kept my Note 7 from Verizon. I disabled Samsung's update app through ADB which prevented ALL of the device killing updates from ever even appearing. This is the second version Note 7, with the green battery charging icon, that I obtained after I brought my first Note 7 back for the first recall.
I have since used my Note 7 ever since, with zero problems of any kind. And I just ordered my new Note 9 to replace it, 512GB and 8GB RAM. Fantastic journey!!!
I'm going to keep m Note 7 and was wondering if any definitive solutions for replacing the battery ever emerged? My Note 7 is at the point where it's battery's capacity has simply diminished from normal use. I have every single battery sucking feature always enabled - high accuracy location scanning, etc. I get a few hours out of a full charge before I'm getting low, plus I get precipitous zeroing in cold weather. Like, the phone shuts off if I leave it in the front pocket of my jacket when downhill skiing, when the battery gets below 40%.
So, I *would* like to replace the battery at some point, for that issue. Will an FE battery just go into it as a direct replacement? I did buy an S8+ battery at one point, after reading that it looked like it would fit/work, but I never got around to trying it. And tonight I just read later that it supposedly won't fit/work. So, I was rewarded for my inaction, in that case
:good:
-John
Click to expand...
Click to collapse
Sorry for mistopic, but can you share your ROM somehow?
My N930V is simply killing me. Interface lags are constant with lots of crashes.
I believe to have the first version without green battery, maybe it's software is not as good as second one.
Can't find any solutions for this on the web unfortunately.
johnpjackson said:
I kept my Note 7 from Verizon. I disabled Samsung's update app through ADB which prevented ALL of the device killing updates from ever even appearing. This is the second version Note 7, with the green battery charging icon, that I obtained after I brought my first Note 7 back for the first recall.
I have since used my Note 7 ever since, with zero problems of any kind. And I just ordered my new Note 9 to replace it, 512GB and 8GB RAM. Fantastic journey!!!
I'm going to keep m Note 7 and was wondering if any definitive solutions for replacing the battery ever emerged? My Note 7 is at the point where it's battery's capacity has simply diminished from normal use. I have every single battery sucking feature always enabled - high accuracy location scanning, etc. I get a few hours out of a full charge before I'm getting low, plus I get precipitous zeroing in cold weather. Like, the phone shuts off if I leave it in the front pocket of my jacket when downhill skiing, when the battery gets below 40%.
So, I *would* like to replace the battery at some point, for that issue. Will an FE battery just go into it as a direct replacement? I did buy an S8+ battery at one point, after reading that it looked like it would fit/work, but I never got around to trying it. And tonight I just read later that it supposedly won't fit/work. So, I was rewarded for my inaction, in that case
:good:
-John
Click to expand...
Click to collapse
John, I have a little insight on replacing your battery. Luckily, all Samsungs S6 and up have the same connector. If you are able to find a battery that fits, whether it be an S7 or S7 edge battery, you might be able to do this repair yourself! I haven't had the opportunity to attempt this repair, as I live in a small town, and the device is almost unheard of nowadays. I work at a mobile repair shop with a national branch, known as CPR Cell Phone Repair. I'll do a little more research on this, and give you a reply with an answer on whether or not it's possible.
The battery protection circuit has been *unofficially* identified as the culprit of these devices. So in that case, use a different device's battery, right?
Thanks,
-Mark
Markb001 said:
John, I have a little insight on replacing your battery. Luckily, all Samsungs S6 and up have the same connector. If you are able to find a battery that fits, whether it be an S7 or S7 edge battery, you might be able to do this repair yourself! I haven't had the opportunity to attempt this repair, as I live in a small town, and the device is almost unheard of nowadays. I work at a mobile repair shop with a national branch, known as CPR Cell Phone Repair. I'll do a little more research on this, and give you a reply with an answer on whether or not it's possible.
The battery protection circuit has been *unofficially* identified as the culprit of these devices. So in that case, use a different device's battery, right?
Thanks,
-Mark
Click to expand...
Click to collapse
You know, I bought a new battery for an S7 edge for it, but never tried installing it because I did some more reading and thought I saw something that made me think it wouldn't fit or have the correct connector or something.
But, I still have the phone and the new battery and it would be way cool to still do the replacement! The original battery is just really tired and beat. It was diwn to holding maybe a third of its original charge capacity. It would be like having a new phone again if I got a working replacement battery into it!! ??
johnpjackson said:
You know, I bought a new battery for an S7 edge for it, but never tried installing it because I did some more reading and thought I saw something that made me think it wouldn't fit or have the correct connector or something.
But, I still have the phone and the new battery and it would be way cool to still do the replacement! The original battery is just really tired and beat. It was diwn to holding maybe a third of its original charge capacity. It would be like having a new phone again if I got a working replacement battery into it!!
Click to expand...
Click to collapse
Let me know how it goes! I'm interested!
Has anybody personally found a good replacement internal battery that has full, or close to full charge capacity? Before anybody says it, I have replaced phone batteries before and have no issues with the risk and disassembly aspect of replacing the battery. I want to install a new one because my current battery dies so quickly anymore, but everywhere I look I only find ones with terrible user reviews. Can anybody point me in the direction of a better quality option?
BranC85 said:
Has anybody personally found a good replacement internal battery that has full, or close to full charge capacity? Before anybody says it, I have replaced phone batteries before and have no issues with the risk and disassembly aspect of replacing the battery. I want to install a new one because my current battery dies so quickly anymore, but everywhere I look I only find ones with terrible user reviews. Can anybody point me in the direction of a better quality option?
Click to expand...
Click to collapse
Did you ever find a good replacement? I want to do mine. 69 percent battery health and I barely get 2.5 hours SOT
snappycg1996 said:
Did you ever find a good replacement? I want to do mine. 69 percent battery health and I barely get 2.5 hours SOT
Click to expand...
Click to collapse
No I ended up using the slightly-less-than-terrible verizon trade in offer on an s10. I got the plus because of the 4ah battery specifically although im already remember how much samsung's UI's blow compared to regular android... But if I had gotten one I would probably just get one directly from ifixit after reading some of the user feedback. Seems like they are mostly better received than amazon and ebay options.
I purchased a battery from the below eBay seller.
https://www.ebay.com/itm/113153374724
It's a genuine battery from what I can tell and came in a clear plastic case. It's dated 2019/01/16, so very recent. I'll be installing it tomorrow.
-Maverick- said:
I purchased a battery from the below eBay seller.
https://www.ebay.com/itm/113153374724
It's a genuine battery from what I can tell and came in a clear plastic case. It's dated 2019/01/16, so very recent. I'll be installing it tomorrow.
Click to expand...
Click to collapse
I just installed this same battery yesterday. Been using it all day today. Seems to work just fine so far. But only time will tell.
I just installed mine today. As you pointed out, no real way to know how good until it's had a few cycles under it's belt. Was the HTC logo marked out on your battery?
-Maverick- said:
I just installed mine today. As you pointed out, no real way to know how good until it's had a few cycles under it's belt. Was the HTC logo marked out on your battery?
Click to expand...
Click to collapse
Logos are marked out to do with customs, in many of countries they do not allow the importation of counterfeit products under copyright law, marking out the company logo bypasses this. Obviously if the actual OEM is selling their own batteries then this does not need to be done.
Any updates on battery life? I am looking to buy from the same seller for my Pixel XL.
Mikekelso421 said:
I just installed this same battery yesterday. Been using it all day today. Seems to work just fine so far. But only time will tell.
Click to expand...
Click to collapse
Got any updates on how the battery fares in day to day use?
shemafied said:
Got any updates on how the battery fares in day to day use?
Click to expand...
Click to collapse
I used it for 2 weeks before selling the phone. The battery worked great. Hello a charge like new. ??
-Maverick- said:
I purchased a battery from the below eBay seller.
https://www.ebay.com/itm/113153374724
It's a genuine battery from what I can tell and came in a clear plastic case. It's dated 2019/01/16, so very recent. I'll be installing it tomorrow.
Click to expand...
Click to collapse
How is it holding up? I am looking for OEM quality replacement battery too, half a year is enough to tell whether it is good or not...
Carmageddon1984 said:
How is it holding up? I am looking for OEM quality replacement battery too, half a year is enough to tell whether it is good or not...
Click to expand...
Click to collapse
Sorry for the late reply.
It was defective, it lasted a week before it would no longer hold a charge. It looked genuine, but I didn't want to deal with a replacement, so I ended up getting a refund, and going with ifixit for a replacement battery instead. I'm guessing I just received a lemon, the seller was solid with the refund.
https://www.ifixit.com/Store/Android/Google-Pixel-XL-Replacement-Battery/IF356-005
Expensive at $25, but it's been solid ever since. Holds a charge very well. I purchased the kit, since I can see myself reusing the tools in the future.
It matches the original bloated battery I took out the first time. It seems to be genuine OEM, the HTC logo on the battery is covered up by a black marker which you can remove with alcohol. You can even make it out a bit in their photos.
-Maverick- said:
Sorry for the late reply.
It was defective, it lasted a week before it would no longer hold a charge. It looked genuine, but I didn't want to deal with a replacement, so I ended up getting a refund, and going with ifixit for a replacement battery instead. I'm guessing I just received a lemon, the seller was solid with the refund.
https://www.ifixit.com/Store/Android/Google-Pixel-XL-Replacement-Battery/IF356-005
Expensive at $25, but it's been solid ever since. Holds a charge very well. I purchased the kit, since I can see myself reusing the tools in the future.
It matches the original bloated battery I took out the first time. It seems to be genuine OEM, the HTC logo on the battery is covered up by a black marker which you can remove with alcohol. You can even make it out a bit in their photos.
Click to expand...
Click to collapse
Thank you for the update!
I guess I will get this one probably, instead of buying the new Pixel 4 XL.. just to see how long it lasts... it still works damn good, and exactly why I chose Google phone over other cheaper contract phones!!
What do you think? any practical reason to get the 4 over a battery upgrade for this one?
Carmageddon1984 said:
Thank you for the update!
I guess I will get this one probably, instead of buying the new Pixel 4 XL.. just to see how long it lasts... it still works damn good, and exactly why I chose Google phone over other cheaper contract phones!!
What do you think? any practical reason to get the 4 over a battery upgrade for this one?
Click to expand...
Click to collapse
Since Google decided to extend support for the OG Pixel/XL with Android 10, they left me little reason to upgrade to 4. They would have to come in at $700 (not going to happen) or less for me to upgrade, or else I'm staying put until next year's 5. There is also the "possible" Pixel 4a/XL to look forward to in 6 months.
I had to buy mine used to replace my OnePlus 5 that had a saltwater accident after 2 years of use. The used eBay pixel XL I bought seemed like it hadn't been used in well over a year based on the software update status. It was also on the beta program so it was probably an enthusiast who bought new and used it a few months and switched to something else throwing it in a drawer. Battery still seems as good as they were new, after months of me using it. Still not as good as the OnePlus 5 and doesn't charge fast but it's still a good phone. Camera is close to as good as anything out there. UI had more lag than the op5 but seems smoother in scrolling and general usage.
Hi,on my pixel XL my USB preferences stopped working and is stuck on charge. After trying different chargers and cables, my phone will only charge using a USB-A to USB-C. When I plug phone into PC, it will only charge, can't change it from charge. I was wondering if someone has had a similar problem. If so, did changing the battery fix this problem or has anyone changed the USB daughter board and that fixed the problem. If anyone knows of a fix for my problem. Thank you.
fiverings said:
Hi,on my pixel XL my USB preferences stopped working and is stuck on charge. After trying different chargers and cables, my phone will only charge using a USB-A to USB-C. When I plug phone into PC, it will only charge, can't change it from charge. I was wondering if someone has had a similar problem. If so, did changing the battery fix this problem or has anyone changed the USB daughter board and that fixed the problem. If anyone knows of a fix for my problem. Thank you.
Click to expand...
Click to collapse
tried the original cables?
sudoxd said:
tried the original cables?
Click to expand...
Click to collapse
Yes and other cables and other charges as well
fiverings said:
Yes and other cables and other charges as well
Click to expand...
Click to collapse
sounds like either firmware or port to me but someone else may be able to correct me. have you also tried on a different computer? could be the ports on there.
sudoxd said:
sounds like either firmware or port to me but someone else may be able to correct me. have you also tried on a different computer? could be the ports on there.
Click to expand...
Click to collapse
Yes, I have tried on a different computer, did work there either. What it feels like, my USB preferences are not on my pixel XL anymore. Like they got wiped off my phone. Thanks
I am making this post so it is more broadly seen by people who have a specific hardware issue.
This solution is for issues specifically with the board being fried or more likely broken solder connection. I found this solution while browsing Chinese Custom Rom threads and apparently it works.
Absolutely it's better to pay a professional reball the broken solder connection.
There is a do it yourself/cheap method that definitely does not involve using an Oven.
I included photos at the bottom of the link and rather than create a redundant post, for something that I have already made : Go here for the Jerry Rig Suggestion
https://forum.xda-developers.com/showpost.php?p=79303956&postcount=72
Good Luck
Make sure you followed all of the unbricking steps here https://forum.xda-developers.com/le-pro3/how-to/unbrick-leeco-phones-leeco-variants-t3847220 before even considering this method..
There are 3 unbricking methods mentioned
Qfil with Flash 2.0 or 1.9 ( Try both)
QPST ( Instructions in first comment of unbricking thread)
Flashbat.all method ( Instructions on Unbrick OP, and in first couple of comments)
Hi
What do you think, can I repair this problem? :
My phone is dead. It is not able to turn on, it just squezing sometimes, if I push the turn on button. The screen is full black since the shut down. No logo no any fastboot screen, nothing. The led light was pale green before the qfil.
drdagi said:
Hi
What do you think, can I repair this problem? :
My phone is dead. It is not able to turn on, it just squezing sometimes, if I push the turn on button. The screen is full black since the shut down. No logo no any fastboot screen, nothing. The led light was pale green before the qfil.
Click to expand...
Click to collapse
I wouldn't bother trying this possible solution unless you are 100% sure that you have broken solder connections. Just because your phone doesnt turn on doesn't mean its the chips. It much more likely that your issue is just the battery.
Also just so you know when the board is fried the phone will still turn on, and will boot to fastboot but not recovery, qfil works but does nothing and if you boot to fastboot and leave it on the fastboot screen the screen will turn to static. At least this is what happens with the majority of chip death issues. However there was one case that I know of on a friends X722 which could not go to fastboot, and that issue ended up being a fried GPU, which this possible fix may resolve.
If you are only getting a black screen leave the phone plugged in overnight ( preferably with a different cable) , After knowing that the phone was charged for long enough what happened? Did the phone get warm at all? Does the phone vibrate?
If the phone does vibrate, try using the QPST method, it's the 2nd post on the Unbricking thread mentioned above in the OP.
Another possible cause of your issue is static, they only way to test and possibly resolved is to unplug the battery from the board and plug back in again. Should you attempt trying this, only use a heat gun to melt the glue holding the screen on...there is alot and a hair dryer will not work, without damaging your LCD.
If I had your issue, I would order a battery and LCD, and swap the battery, there is a good chance it will work. If not you can move on to more drastic solutions such as the one mentioned in the OP. Worse case scenario, you will be out the cost of the battery which is about $7 and LCD which is about $15
Good Luck and make sure you followed all of the steps here https://forum.xda-developers.com/le-pro3/how-to/unbrick-leeco-phones-leeco-variants-t3847220
There are 3 unbricking methods mentioned
Qfil with Flash 2.0 or 1.9 ( Try both)
QPST ( Instructions in first comment of unbricking thread)
Flashbat.all method ( Instructions on Unbrick OP, and in first couple of comments)
I believe I read this thread before, but didn't read it well
This thing here I believe is very important, so much to put it in special color
>>Also just so you know when the board is fried the phone will still turn on, and will boot to fastboot but not recovery, qfil works but does nothing and if you boot to fastboot and leave it on the fastboot screen the screen will turn to static.
I guess it's certain now that I have some harware issue, most probably if GPU is separated from the CPU.
tsongming said:
the board being fried or more likely broken solder connection. I found this solution while browsing Chinese Custom Rom threads and apparently it works.
Click to expand...
Click to collapse
I don't know if it's just me who is unlucky but I have lost yet another USB board. This time the one you sent me burnt up as I connected it to my PC. I don't think it's a cable issue because I was using a high quality USB cable from BASEUS. How could it be that I'm not seeing more complaints like mine?
This time I think it could have been caused by dirt in the port because I'd just returned from my rural area and there I did a lot of work involving dirt. Also, there was a slight shower that got me on my way back and I keep the phone in the pocket with the USB port exposed and looking up. My patience with this phone has just about run out now. This is the worst investment I've ever made on a phone :crying:
Sent from my LeEco Le Pro3 using XDA Labs
twistyplain said:
I don't know if it's just me who is unlucky but I have lost yet another USB board. This time the one you sent me burnt up as I connected it to my PC. I don't think it's a cable issue because I was using a high quality USB cable from BASEUS. How could it be that I'm not seeing more complaints like mine?
This time I think it could have been caused by dirt in the port because I'd just returned from my rural area and there I did a lot of work involving dirt. Also, there was a slight shower that got me on my way back and I keep the phone in the pocket with the USB port exposed and looking up. My patience with this phone has just about run out now. This is the worst investment I've ever made on a phone :crying:
Sent from my LeEco Le Pro3 using XDA Labs
Click to expand...
Click to collapse
Wow, sorry to hear that. I think that those LeEco phones are hit or miss. But it really doesn't seem that they were made to last more that a couple of years. I have fried the usb card myself, when I bought very first leeco, its too easy to fry those cards, and in retrospect the Leeco charge is too powerful. The remaining Leeco that I have left charges much better ( stays cooler) when using my Xiaomi Charger.
I agree that you have had some really bad luck. I would not put any more money into it. you are better off buying a cheap Xiaomi...even a used one. You can find some good deals on Amazon and Swappa. Amazon also has refurbished Samsung phones, and they are highly reliable.
You can get a Galaxy 7 for $139 https://www.amazon.com/Samsung-Gala...s=wireless&ie=UTF8&qid=1573693012&sr=1-4&th=1 and they are really good phones.
Here is a renewed One Plus 6T for $267 https://www.amazon.com/OnePlus-A601...ked+cell+phones+renewed&qid=1573693220&sr=8-4
LG V30 for $177 https://www.amazon.com/LG-Camera-Si...ed+cell+phones+renewed&qid=1573693365&sr=8-21
I bought my daughter an A3 and honestly I can't recommend it enough. For a tight budget I personally feel that this is one of the best deals out there for ony $158 ( $50 less than what I paid 2 months ago) https://www.amazon.com/Xiaomi-A3-64...=sr_1_3?keywords=Xiaomi&qid=1573693435&sr=8-3
It has an Amoled Screen and comes with Android One with zero bloatware. You basically get a custom rom experience with a stock phone. To make matters better Android 10 will be released for the A3 in January. The camera, is light years better than the Le Pro 3 and the processor is honestly fast enough, for most of us. No doubt, its more expensive than just getting another card. But saving yourself from the hassles of these constant issues will make it worthwhile. The only drawback is the screen is 720 instead of 1080. But I swear, if you place in side by side with my Mi8, most people would never guess, that the resolution is a little less. Because it's still an amoled screen.
Best wishes, unfortunately I don't have any more working cards or I would send it to you.
I've learned that quick charge is dangerous. I'm using now an usb meter that doesn't let an output beyond 1.4amps to charge my phone now, it charges pretty quickly in fact and my phone doesn't get hot now (even that I live in a hot area)
tylerciggy said:
I've learned that quick charge is dangerous. I'm using now an usb meter that doesn't let an output beyond 1.4amps to charge my phone now, it charges pretty quickly in fact and my phone doesn't get hot now (even that I live in a hot area)
Click to expand...
Click to collapse
Yeah. The current pushed by the stock leeco charger is either too high (doubtful) or the charging system of the pro 3 isn't designed to handle quick charge 3 very well (most likely). I have used my stock leeco charger to charge my brother's Nokia 8 (Q.C. 3) and it gets just a little warm even with a case on. Also, the leeco charger is Quick Charge 3 certified so they must have made it according to Qualcomm standards.
I think it's the quality of the parts on the phone itself that are substandard. Since this USB board was sent to me by @tsongming and he had used it quite a while, I believe it could have been perfectly fine. My suspicion is that something else could be wrong with my phone like the USB flex cable. The kind of burning I saw must have been caused by power from the battery because the USB 2.0 port I was connecting to on my PC can only provide 2.5 amps maximum. This is not enough in my opinion to completely melt the usb-c receptacle on the phone. (It's very badly burnt). I will just have to charge the battery externally until I figure out whether it's worth investing any more money into this phone.
Sent from my LeEco Le Pro3 using XDA Labs
twistyplain said:
Yeah. The current pushed by the stock leeco charger is either too high (doubtful) or the charging system of the pro 3 isn't designed to handle quick charge 3 very well (most likely). I have used my stock leeco charger to charge my brother's Nokia 8 (Q.C. 3) and it gets just a little warm even with a case on. Also, the leeco charger is Quick Charge 3 certified so they must have made it according to Qualcomm standards.
I think it's the quality of the parts on the phone itself that are substandard. Since this USB board was sent to me by @tsongming and he had used it quite a while, I believe it could have been perfectly fine. My suspicion is that something else could be wrong with my phone like the USB flex cable. The kind of burning I saw must have been caused by power from the battery because the USB 2.0 port I was connecting to on my PC can only provide 2.5 amps maximum. This is not enough in my opinion to completely melt the usb-c receptacle on the phone. (It's very badly burnt). I will just have to charge the battery externally until I figure out whether it's worth investing any more money into this phone.
Sent from my LeEco Le Pro3 using XDA Labs
Click to expand...
Click to collapse
My X722 died because I just plugged in the cable to charge. Although I have to admit that the phone socket was not in optimal conditions because I used a crappy cable, so the last one I was using was charging fine but it had to enter in an specific position in order to quick charge to function. It's probably the charger IC that is damaged, but I haven't had the money to send it to repair.
As far as I know, the motherboards just provide 0.5amp unless you are using an special port that can provide more power.
In my opinion 2.5amp at 5v is not that good either, because it's pushing the limit of most phones at 5v.
I am guessing that buying the original $30 USB board from AliExpress won't buy me much time because they have all been used before. Almost every spare part of this phone is not brand new (except for batteries and screens, I guess).
I think it's time to cut my losses. My pro 3 not only needs a new USB board but also a battery and another high quality USB cable. I might buy all of that for $60 only to have the USB port burn again. It doesn't make any sense to keep pouring money into this phone.
Sent from my LeEco Le Pro3 using XDA Labs
What ? $30 usd ? I've seen it in $2.5 for 2 boards, well, not original of course.
You just need to check that it has the extra IC, because there are ones that doesn't has it... although I don't remember what was for that IC, but you can easy see it that some boards just are missing a chip.
As for the cable, I'm using some EFFE cables (EFFE is the brand) and they are working wonderfully, I bought 3 for $7 usd, they plug in fine and stay in too, they were recommended to me by a friend and I'm very happy with them. They even stop giving charge to my dead phone because they detect somehow that there is a short, well, at least that is what my usb meter tells me, although I don't know how do they manage to do that, I don't really think they have an IC in them.
twistyplain said:
I am guessing that buying the original $30 USB board from AliExpress won't buy me much time because they have all been used before. Almost every spare part of this phone is not brand new (except for batteries and screens, I guess).
I think it's time to cut my losses. My pro 3 not only needs a new USB board but also a battery and another high quality USB cable. I might buy all of that for $60 only to have the USB port burn again. It doesn't make any sense to keep pouring money into this phone.
Click to expand...
Click to collapse
For the record the board that I sent you came from a brand new, LePro 3 not opened bought in the spring 2018. However, I assume that it was made after Leecos public fall. I would guess that it was assembled with C grade parts, because my remaining, working LePro 3 is one of our first Leecos bought in 2016. It's also interesting to note that our 2 remaining X522s are both functioning just fine.
As you said could be the flex cables or just a shoddy soldering job that eventually shortened out the board.
Have you tested the board to be sure that it's not the port itself that is bad?
Another interesting thing to note is that Qualcomm removed Leeco from it's list of approved quick charge device list.
One last reason on why I feel that the charger itself may be part of the problem is that I have a 12 watt portable charger and the Leecos do not get hot at all when using it.
I threw my Leeco charging bricks in the trash after my daughter plugged in my Mi8 for me while I was cooking dinner. Not knowing that I had a preference, she used the Leeco charger.
Later when I checked the phone to see if it was finished charging, I found it was extremely hot, and this phone is rated for QC 4.0. So rather than taking any chances into the trash it went.
tsongming said:
For the record the board that I sent you came from a brand new, LePro 3 not opened bought in the spring 2018. However, I assume that it was made after Leecos public fall. I would guess that it was assembled with C grade parts, because my remaining, working LePro 3 is one of our first Leecos bought in 2016. It's also interesting to note that our 2 remaining X522s are both functioning just fine.
As you said could be the flex cables or just a shoddy soldering job that eventually shortened out the board.
Have you tested the board to be sure that it's not the port itself that is bad?
Another interesting thing to note is that Qualcomm removed Leeco from it's list of approved quick charge device list.
One last reason on why I feel that the charger itself may be part of the problem is that I have a 12 watt portable charger and the Leecos do not get hot at all when using it.
I threw my Leeco charging bricks in the trash after my daughter plugged in my Mi8 for me while I was cooking dinner. Not knowing that I had a preference, she used the Leeco charger.
Later when I checked the phone to see if it was finished charging, I found it was extremely hot, and this phone is rated for QC 4.0. So rather than taking any chances into the trash it went.
Click to expand...
Click to collapse
Wow!! Leeco really must have used grade c parts. I haven't mistreated that board even once since you sent it. That means it only lasted three months! It is just unbelievably negligent for leeco to use these parts. They must have been from the reject pile.
I don't need to test the board because the USB-C receptacle on the phone is completely melted. Connecting a charging cable seems to cause it to heat up fast and start smoking. It might have been a short on the connector that caused it to burn up. I think the quality of the protruding part with the pin connectors is just poor and repeated use loosens the pins which eventually touch.
I'm done with leeco for good now. I was thinking about fixing the phone to sell but that now seems like a lost cause. I'll keep it until it's dead and then take a hammer to it. Even selling it for spare parts might be a loss for me so I'm stuck with it.
Sent from my LeEco Le Pro3 using XDA Labs
twistyplain said:
Wow!! Leeco really must have used grade c parts. I haven't mistreated that board even once since you sent it. That means it only lasted three months! It is just unbelievably negligent for leeco to use these parts. They must have been from the reject pile.
I don't need to test the board because the USB-C receptacle on the phone is completely melted. Connecting a charging cable seems to cause it to heat up fast and start smoking. It might have been a short on the connector that caused it to burn up. I think the quality of the protruding part with the pin connectors is just poor and repeated use loosens the pins which eventually touch.
I'm done with leeco for good now. I was thinking about fixing the phone to sell but that now seems like a lost cause. I'll keep it until it's dead and then take a hammer to it. Even selling it for spare parts might be a loss for me so I'm stuck with it.
Click to expand...
Click to collapse
I am sure that they used low quality parts on those last batches of phone, I heard via a friend who lives in Shenzhen that they hired a 3rd party to assemble the final phones... The ones that came with 32gb drives, no nfc or quick charge etc. It sucks because they had so much potential.
Whatever you end up getting. Please do stay in touch, I have enjoyed our conversations and I wish you the best.
tsongming said:
I am sure that they used low quality parts on those last batches of phone, I heard via a friend who lives in Shenzhen that they hired a 3rd party to assemble the final phones... The ones that came with 32gb drives, no nfc or quick charge etc. It sucks because they had so much potential.
Whatever you end up getting. Please do stay in touch, I have enjoyed our conversations and I wish you the best.
Click to expand...
Click to collapse
This puppy is not out yet. I figure it's got one last hurrah before I throw in the towel. I've been shopping around for a phone with similar performance for around the same price but from the current generation of phones and I've not come across anything else. At least not in the same price range. Performance is very important to me and I just can't take a downgrade. I guess I'm stuck with it for a while.
Sent from my LeEco Le Pro3 using XDA Labs
twistyplain said:
This puppy is not out yet. I figure it's got one last hurrah before I throw in the towel. I've been shopping around for a phone with similar performance for around the same price but from the current generation of phones and I've not come across anything else. At least not in the same price range. Performance is very important to me and I just can't take a downgrade. I guess I'm stuck with it for a while.
Sent from my LeEco Le Pro3 using XDA Labs
Click to expand...
Click to collapse
Its good that it's still working for now. Unfortunately you probably only have 4 to 6 weeks before it stops working completely. I was thinking about you situation and made the list below of additional options/good deals.
The Snapdragon 665 has similar performance to the Snapdragon 821 and the Note 8, (the version with the SD665) can be had for under $200 : https://www.amazon.com/Xiaomi-Displ...keywords=Snapdragon+665&qid=1573874157&sr=8-2
If you can spend a just a little more the Mi8's price has dropped to $250, https://www.amazon.com/Xiaomi-6-64G...ef=sr_1_1?keywords=Mi+8&qid=1573874317&sr=8-1 and I can't recommend it enough. It's definitely my most favorite phone that I have owned and I know that you care about the camera a lot. I can promise that the Mi 8 has one hell of a great camera, and stock camera, is absolutely fantastic, especially with video. In fact, I prefer it for video over the latest Pixel 7.XXX Camera and yes it does Astrophotography.
As I mentioned before the A3, is much better than you would ever expect and you can find them for $150.
If budget is a primary concern: It is definitely worth looking at among the best new phones for the money. Plus the bootloader is easily unlocked with no waiting period. if you want a new phone for around $150. I honestly can't think of a better phone, and as I mentioned my daughter has this phone, so I have actually used it, and I am telling you, it's damn good.
Another option is buying a used 128GB Pixel refurbished $120
I have seen them for as low as $75, or you could buy a One Plus 3T
Edit: I just now found this phone and although it has a mediatek processor, its brand new , has Android 9.0 , 4gb ram, 64 gb hd space and it's just a little over $100 UMIDIGI Power This may be the one, if you can deal with processor but there's a lot of people who say that this phone is great, I dont know if you can use roms, but I have heard that it doesn't have bloatware, so it be a smart buy. Edit : The $118 price is a lightning deal, and the price will go backup to $139 by the time you read this. In that case, I would personally avoid it, but I am am a little biased against mediatek for reasons. Mostly heat and poor battery life.
tsongming said:
Its good that it's still working for now. Unfortunately you probably only have 4 to 6 weeks before it stops working completely. I was thinking about you situation and made the list below of additional options/good deals.
The Snapdragon 665 has similar performance to the Snapdragon 821 and the Note 8, (the version with the SD665) can be had for under $200 : https://www.amazon.com/Xiaomi-Displ...keywords=Snapdragon+665&qid=1573874157&sr=8-2
If you can spend a just a little more the Mi8's price has dropped to $250, https://www.amazon.com/Xiaomi-6-64G...ef=sr_1_1?keywords=Mi+8&qid=1573874317&sr=8-1 and I can't recommend it enough. It's definitely my most favorite phone that I have owned and I know that you care about the camera a lot. I can promise that the Mi 8 has one hell of a great camera, and stock camera, is absolutely fantastic, especially with video. In fact, I prefer it for video over the latest Pixel 7.XXX Camera and yes it does Astrophotography.
As I mentioned before the A3, is much better than you would ever expect and you can find them for $150.
If budget is a primary concern: It is definitely worth looking at among the best new phones for the money. Plus the bootloader is easily unlocked with no waiting period. if you want a new phone for around $150. I honestly can't think of a better phone, and as I mentioned my daughter has this phone, so I have actually used it, and I am telling you, it's damn good.
Another option is buying a used 128GB Pixel refurbished $120
I have seen them for as low as $75, or you could buy a One Plus 3T
Edit: I just now found this phone and although it has a mediatek processor, its brand new , has Android 9.0 , 4gb ram, 64 gb hd space and it's just a little over $100 UMIDIGI Power This may be the one, if you can deal with processor but there's a lot of people who say that this phone is great, I dont know if you can use roms, but I have heard that it doesn't have bloatware, so it be a smart buy. Edit : The $118 price is a lightning deal, and the price will go backup to $139 by the time you read this. In that case, I would personally avoid it, but I am am a little biased against mediatek for reasons. Mostly heat and poor battery life.
Click to expand...
Click to collapse
Tony, you're among very few people I know who are invaluable to communities like these. I'm always impressed by how easily you go out of your way to help community members at XDA. Thank you so much for always being helpful even when you don't have to be. If I had the means I would buy you several cases of beer (or whatever non-alcoholic beverage you like) just to say how much I appreciate you. But for now I can just say THANK YOU!! From the bottom of my heart.
Out of all the options you gave me just now and a few days ago, the brand new Mi A3 is the best option by far. Refurbished is a no-go and yes, I hate Mediatek too. Been there, done that, but once you've got a taste of Qualcomm, there's simply no going back. I'm inclined to go for the A3 because of its AMOLED screen, UFS 2.1, decent camera, and, most importantly, it's price-performance ratio. It doesn't beat the A2 in performance but it more than makes up for it in the additional features.
I am going to keep the pro 3 as long as I can to see if prices drop even more (I'm all about the value). It's only my charging port that's gone so I'm taking out the battery and charging it externally for as long as I can. Everything else works normally. I'm also on my last ROM for this phone -- I can't flash another one because I changed to TWRP 3.2.1 which doesn't see my internal storage anymore (encryption).
Sent from my LeEco Le Pro3 using XDA Labs
tylerciggy said:
What ? $30 usd ? I've seen it in $2.5 for 2 boards, well, not original of course.
You just need to check that it has the extra IC, because there are ones that doesn't has it... although I don't remember what was for that IC, but you can easy see it that some boards just are missing a chip.
As for the cable, I'm using some EFFE cables (EFFE is the brand) and they are working wonderfully, I bought 3 for $7 usd, they plug in fine and stay in too, they were recommended to me by a friend and I'm very happy with them. They even stop giving charge to my dead phone because they detect somehow that there is a short, well, at least that is what my usb meter tells me, although I don't know how do they manage to do that, I don't really think they have an IC in them.
Click to expand...
Click to collapse
Sorry I hadn't seen this post. The cheaper boards tagged as "copy" boards don't have working quick charge or ability to connect to pc for mtp file transfer. They're only good for slow charging and sometimes even that is hit or miss. The boards that cost between $25 and $30 are original leeco boards. Probably not brand new but original. They have all features of the original like quick charge, mtp, otg, cdla and everything else the new phone could do. I wouldn't even consider going close to the cheaper "copy" boards.
I had a single 50 cm baseus USB cable that i bought for around $4 and it was of very good quality. It even supported usb PD and it was built like a tank. Just holding it gives you confidence that it's gonna last a while. Even the board getting fried didn't damage the cable but I'm not using it again. The power pin on the usb cable changed from gold to just plain silver so it must have taken some damage. I would buy a new one to be safe.
I'm done repairing this phone for good. It's not worth the expense and there's too much uncertainty involved even after it's fixed. I could fix it and have it die barely a month later. That would be $50 down the drain. I'm not going through that again.
Sent from my LeEco Le Pro3 using XDA Labs
It seems this phone is on its last leg now. Since yesterday the proximity sensor doesn't work. I think it must be all this opening and closing up of the metal shield to remove the battery. Also, the earpiece speaker only works in loudspeaker mode now. It doesn't work in calls. I think I might have an audio related software issue because sound isn't playing even if I play a music or video file. I have flashed another ROM but this behavior remains. Could this require me to flash persist?
Edit: The earpiece and proximity sensor are acting up because of the damaged USB board. Both work well when I use an app that tests hardware features. They are failing to work for phone calls and video playback because the phone is detecting that I have earphones plugged in. I figured this out when I reflashed a new PIE ROM and saw the headphone icon is always displayed on the status bar even without anything connected to the port. I guess the board getting fried messed up with jack detection.
@tsongming Please tell me if this motherboard is le pro3 x722 or le pro3 x720.
https://drive.google.com/file/d/1DD0JQRZe4t4KOmedt0eEThaGEOKBH3AZ/view?usp=sharing
I have a factory unlocked SM-N975U1 Note 10+, using on AT&T's network. It recently had an update pushed to it (early April 2022) that I let install before I went to sleep, then the next day found that wireless charging no longer works. I suspect the update is the culprit - so a software glitch. I have tried everything listed here: https://tinyurl.com/yckk9mmr by The Droid Guy, from rebooting to refreshing the system cache, to no avail. The wireless charger in my truck, on my desk at home, and my husband's wireless charger - all of with which it worked perfectly before the update to charge the phone - all recognize the phone is there but the LED on each begins to flash rapidly, so I am certain it is something with the phone. I am about to try to root the phone so I can install Titanium Backup or try Nandroid then do a factory reset. Short of that option of last resort, do any of you have any idea what else could possibly be the issue here? The only other thing I can think of would be the fact that the back glass is cracked, but has been for a while now, so while I could see correlation, I do not see causation. But I am by no means anywhere close to being an expert, so I may be wrong on that point. Any advice or suggestions would be greatly appreciated! I do not want to incur the expense of a repair from Samsung, and am considering perhaps just getting a Qi receiver - the type you'd add to a phone between the phone and case to add wireless charging to any phone. If nothing else, if you have any recommendations on that point as well they would be most welcome.
Thank you in advance for your time and assistance.
Could be a battery failure. Get the rear cover replaced and the phone inspected for damage.
Replaced battery if it capacity is less than 80% of when new ie SOT.
Updates can break things and make troubleshooting more difficult. This could've been caused by the update or be purely coincidental.
bdh1975 said:
I have a factory unlocked SM-N975U1 Note 10+, using on AT&T's network. It recently had an update pushed to it (early April 2022) that I let install before I went to sleep, then the next day found that wireless charging no longer works. I suspect the update is the culprit - so a software glitch. I have tried everything listed here: https://tinyurl.com/yckk9mmr by The Droid Guy, from rebooting to refreshing the system cache, to no avail. The wireless charger in my truck, on my desk at home, and my husband's wireless charger - all of with which it worked perfectly before the update to charge the phone - all recognize the phone is there but the LED on each begins to flash rapidly, so I am certain it is something with the phone. I am about to try to root the phone so I can install Titanium Backup or try Nandroid then do a factory reset. Short of that option of last resort, do any of you have any idea what else could possibly be the issue here? The only other thing I can think of would be the fact that the back glass is cracked, but has been for a while now, so while I could see correlation, I do not see causation. But I am by no means anywhere close to being an expert, so I may be wrong on that point. Any advice or suggestions would be greatly appreciated! I do not want to incur the expense of a repair from Samsung, and am considering perhaps just getting a Qi receiver - the type you'd add to a phone between the phone and case to add wireless charging to any phone. If nothing else, if you have any recommendations on that point as well they would be most welcome.
Thank you in advance for your time and assistance.
Click to expand...
Click to collapse
What happens when you charge with the usb c cable? Any warning message?
Is Samsung replacing these phones for this issue? I am so irritated. Just press the back of the phone hard and it will work again??? I remember the Fonz hitting the jukebox on Happy Days, but seriously on a $1,000 phone? Gimme a break.
I just had the same problem. Is this really a thing? I can't believe this is a known issue. I followed pressing just below the camera to the right of the back and now it works.
(see the post I found below).
There seems to be a problem with the wireless assembly’s contact to the
mother board which has a temp sensor attached. Give your phone a gentle
press on the back just under the camera and a little bit to the right.
This is just a temporary fix as the wireless charger will probably lose
contact again. Hope this helps.
From: https://de.ifixit.com/Antworten/Ansehen/644492/note+10+temperature+too+low
6
Reply
Share
ReportSaveFollow
level 3
BlackberryOne4579
·7 mo. ago
Thanks! This worked for me! Pressed on it a bit and something made a little click and boom it works
2
Reply
Share
ReportSaveFollow
level 4
Beb0p27
·7 mo. ago
No problem! Glad it worked!
1
Reply
Share
ReportSaveFollow
https://www.reddit.com/user/fwmccabe/
level 3
fwmccabe
·7 mo. ago
My Galaxy Note10+ quit wirelessly charging yesterday. I tried this and it worked! Thanks!
If I recall correctly the coil for wireless charging on the N10+ is connected by a ribbon cable. It may have become detached. Unlike the contact points Samsung used for the GPS antenna like on the S4 they should not fail.
Always use a good case to protect the N10+ from high G loading during drops as they can damaged the mobo or knock connectors loose even if there's no apparent outside damage. These are relatively heavy phones that wuv to corner impact when dropped.
Thank you for responding!
Weird, I have never dropped it. Its brand new and I have a good case on it at all times. Maybe it was just loose to begin with? Will this fix it for good as long as it doesn't get jarred loose?
So you are saying the contact points like the S4 would fail and this ribbon cable should not fail, just can come loose?
What does "wuv to corner impact" mean?
Tenacious--M said:
Thank you for responding!
Weird, I have never dropped it. Its brand new and I have a good case on it at all times. Maybe it was just loose to begin with? Will this fix it for good as long as it doesn't get jarred loose?
So you are saying the contact points like the S4 would fail and this ribbon cable should not fail, just can come loose?
What does "wuv to corner impact" mean?
Click to expand...
Click to collapse
The S4 had point contacts that were held in place by pressure and could corrode over time, completely different from a ribbon connector.
Whatever is loose or broken will likely need to be serviced eventually.
I wouldn't sweat, I never used wireless charging on my N10+'s, don't even know if it works. Cable charging is superior, faster and the C port socket on the N10+ is robust. Good for many thousands of cycles.
Tenacious--M said:
What does "wuv to corner impact" mean?
Click to expand...
Click to collapse
Wuv is love with a mean twist added...
Oh, lol!
Would pressing harder on the recommended spot possibly get it to mount down firmly to where it wont have constant problems? Or will it just get worse?
Tenacious--M said:
Oh, lol!
Would pressing harder on the recommended spot possibly get it to mount down firmly to where it wont have constant problems? Or will it just get worse?
Click to expand...
Click to collapse
Have the rear cover pulled and see what you got.
The coil assembly may have failed.
If the battery is near 80% of its original capacity then replace that then too. This phone is too valuable to be mucking with it by pressing on the rear cover... not a good plan.
So guess what? I had recently purchased this unit as NEW, Sealed with 1 year factory warranty with on eBay. Seller had good feedback so I thought I could trust them. I was so perturbed with this charging issue after only have it for two weeks that I got with Samsung Support. I figured I was covered since it was new, sealed and had a 1 year warranty with Samsung. They verified that this phone was activated April of 2020 and the warranty expired April 2021. He also said he can see that the battery life has been used to where it only has about 50% of the potency it had when it was new. Total fraud!!!
Tenacious--M said:
So guess what? I had recently purchased this unit as NEW, Sealed with 1 year factory warranty with on eBay. Seller had good feedback so I thought I could trust them. I was so perturbed with this charging issue after only have it for two weeks that I got with Samsung Support. I figured I was covered since it was new, sealed and had a 1 year warranty with Samsung. They verified that this phone was activated April of 2020 and the warranty expired April 2021. He also said he can see that the battery life has been used to where it only has about 50% of the potency it had when it was new. Total fraud!!!
Click to expand...
Click to collapse
Contact your bank and see if you can return it and have the bank do a charge back. Your state attorney general's office may be able to help as well but I would go with the first option and a full cash refund.
I do know a reliable vendor for new ones if you need that contact. I've used them. A1.
Thank you, I sure do appreciate that. Yes, I would love your contact if you would be so kind.