My MI Max (3gb/64gb 2016) completely bricked out after installing a CM13 rom, it was rooted and had TRWP installed (and working). Screen is black, no Led's.
I've tried connecting it to my Windows 10 (64 Bits) PC, turned Driver Signature off. It recognizes something when I connect my MI Max but cannot load the correct USB (Serial) drivers so I cannot use MIFlash to restore the firmware. Who can tell me what drivers I need to install (tried a lot of Qualcomm drivers but non are recognized by windows and therefor not working for MI Flash (Beta)). It is driving me crazy.
The device manager states Unknown USB Device (Device Descriptor Request Failed)
PLEASE HELP
hey buddy just follow this guide exactly and you'll be up and running like nothing happened before.heres the link http://en.miui.com/thread-3282-1-1.html. if the device doesn't get into edl mode with the mentioned button combo (as it happened to me).press the volume up+vol down + power (all 3 buttons simultaneously) and let go once u feel a vibration.once u get into edl mode the screen will be blank,no button or notification lights,just will show up in ur PC device manager after u install the drivers.I personally used this guide and the linked files to upgrade my mi max hydrogen (3gb ram/32gb) from global stable to global developer on win 10 64bit
Any luck?
[deleted]
i wonder why people post questions and disappear.
maybe he solved his problem...
Hello, I have also managed to brick my Mi Max while trying to flash RR ROM with TWRP.
My phone is completely dead, when trying to get into EDL mode the phone doesn't respond as mentioned in this thread.
The PC therefore doesn't recognized phone as HSUSB_BULK only as "unknown..." how to proceed ?
Related
Hi everyone,
My zenfone 2 ZE551ML is bricked, so i followed this guide http://forum.xda-developers.com/zenfone2/general/guide-brick-soft-hard-bricked-zenfone-2-t3284256
The problem comes when i arrived to the step of IntelSoc:
I install it, no problem until here, i got IntelSoc driver in my device manager .
But when i want to have the MOOREFIELD driver, I cant get it. Following this perfectly
Ash back to the Zenfone 2, shutdown, press simultaneously the key "source" + "volume +", of course you will see a screen hanging cables( I don't have hanging cables though, I just have the Logo Asus and write on the top in blue Fastboot mod !!!).
-Connect to your computer via USB cable, to standard Intel SOC driver position, wait a few seconds if the current add an item immediately below another MOOREFIELD new devices is successful.
-If You have not been, the test performed as follows: turn off the machine, plug the cable into the computer, press the power button until the device vibrates slightly, then release.
If you have an idea can you help me please. I think this is the only thing who blocks me in repairing my phone...
Thank you
Yea that problem also persists with my zenfone 2,cant install moorefield 'cause pc cant recognize my phone. Somebody please help us out.
Anagh21 said:
Yea that problem also persists with my zenfone 2,cant install moorefield 'cause pc cant recognize my phone. Somebody please help us out.
Click to expand...
Click to collapse
it is clearly instructed in that thread you mentioned. just keep few things in mind.. uninstall every mobile related driver before installing isoc. uninstall xFSTK tool if you already installed it before installing isoc. third as you are concerned about the line you mentioned morefield under intel soc. well during soc install you will see windows like attached below. at this stage you need to power cycle your device . ( turn off your device holding power button for 10 sec. then connect to pc and turn on. leave connected to pc and turn off again and turn on second time to make sure so driver are installed) don't worry if you don't see morefield under soc now. just go ahead and install xFSTK. now your concern that your device don't stays in morefield download stage ( i mean it appears in device manager and disapear) . after installing xFSTK. run it as administrator and load files. and change gp flag value. also change device detection timeout to 120. now click begin download it will start waiting for device. now turn off your device completely and connect to pc and turn on. xFSTK will force it to stay in required mode. if download do not starts. just power cycle the device while being connected to the tool.
( note: it is strongly recomended that you install isoc and connect mobile before installing. if you have already installed xFSTK then plz uninstall it and install it after performing above said steps. remove all other mobile related drivers also and if you are using windows 8 or 10 disable driver signature enforcement again even if you did it earlier)
The problem with asus flash tool solved
Solution : Open device manager i.r. Windows + X .... if your phone is not being detected... switch it on and off ... there will be ( other devices menu ) that will show your phone there..
right click on the phone , click update drivers, ofcoarse no drivers online, locate the drivers manually , wherever your bootloader file is i.e. the 1 gb file you download or the raw file as we can speak ... i didn't pin pointed it ... my file was on the desktop so I just chose desktop and it searched it and installed it.
After that the phone was successfully in the computer and being detected by the flash tool.
Greetings every one ..
I have a half dead Oneplus 3 Unlocked + Rooted
here is my problem
there is no OS in it and i flash TWRP many times via ADB and wont boot to it
and i tried to flash the stock recovery V2.0 and done successfully
the sideload mode Recognize my OP3 but when i try to flash the Oxygen Rom it Gives me cannot read
also i tried the Unbrick Tool when the device is connect it showing me Qualcomm hs-usb qdloader 9008
but when i power up the tool as administrator it showing me (no device)
see here : https://www.youtube.com/watch?v=BIbagVAXJJk
Thanks .
on the unbrick guide try method 2 but completley power off the device and count to 10 when holding the vol up button THEN plug the device in. i had that issue also. if you get errors or for some reason it dosnt show up again try on a diffrent pc it will work
Try method 2. BTW "cannot read" error has to do with faulty ADB drivers, get the platform ones
I did instal the right ADB drivers in fact
still no luck
The ones from platform tools? Since that "cannot read" error has nothing to do with your device. Have you tried renaming it? Rebooting your PC? Last one did wonders for me for some stupid reason.
Hi,
I also had this message of "can not read" in sideload mode, this problem often happens with Windows 10, so I used Windows 7 on another pc and it was OK.
I tried Windows 10 & 8.1 & 7 & XP
still The same problem
What if you flash Twrp and boot into it? Then u can adb push the filemm
I tried via fastboot and its done right
but when i reboot into the new TWRP recovery its stuck in the boot oneplus as same like the Video shown up
book an appointment with oneplus live chat so a service tec can fix it and if they ask if it was rooted say no
Hi,
If you access TWRP, install the Official Oneplus Recovery 4.0.2
In TWRP click "intaller" then choose "install image" and select the file you will have to copy to the phone in recovery mode.
Then restart in recovery mode, choose english, then "adb sideload mode"
From there you should be able to flash your phone with an official Nougat zip.
Do the under windows 7.
It is necessary to install the Oneplus USB drivers and ADB tool on your PC before any manipulation.
Finally I solved the problem
like i said B4 my phone wont boot into TWRP by any chance
i traid all the Officials TWRP one and they stuck on the boot image or power the phone off
i flashed a modified twrp (blu_spark 3.0.3-x) thanks for this beautiful smart man eng.stk if im not wrong
and thank you all for the help
i had similar issue...with several phones.. download Malwarebytes trial version and run it...i had a few stealth root tool kit viruses.causing my system to have a hiccup....
Hello sirs, I hope you can help me.
I have a mi6 that turned into a brick. Hold the buttons to it to give restart / download mode or put it to load. He does not respond to anything.
However,
By putting it on your computer it recognizes you as Qualcomm QDLoader 9008.
I wonder if I can recover it yet. or unfortunately it turned a paper weight.
DL Xiaomi flash tool and flash fastboot rom. It will be fine.
icrunchbanger said:
DL Xiaomi flash tool and flash fastboot rom. It will be fine.
Click to expand...
Click to collapse
I tried to do this form, downloaded all the miui site drivers, adb fastboot and cualcomm driver.
How to run my flash with a last method with the xiaomi global mi6 I got the following error:
"Cannot receive hello packet Xiaomi Device"
The program tried a few more times and nothing more.
What can I be doing wrong? Do you have another option? because he is in what they call DeadBrick (I discovered this term only now, after searching the forums)
XeeXa said:
I tried to do this form, downloaded all the miui site drivers, adb fastboot and cualcomm driver.
How to run my flash with a last method with the xiaomi global mi6 I got the following error:
"Cannot receive hello packet Xiaomi Device"
The program tried a few more times and nothing more.
What can I be doing wrong? Do you have another option? because he is in what they call DeadBrick (I discovered this term only now, after searching the forums)
Click to expand...
Click to collapse
I know, i was there. Reboot your computer and start again.
I restarted and tried again.
I formatted and installed only the drivers and the error continues.
I tried with miflash 2015 until version miflash2017
I think, you device isn't in EDL mode. You open back cover of device. Make test point for QDL 9008. Then, you flash fastboot rom by Mi flash tool. It's very simply. I made it for unbrick my Mi6 several times.
See video here.
https://youtu.be/vSNRQdUuNYw
bahuy2003 said:
I think, you device isn't in EDL mode. You open back cover of device. Make test point for QDL 9008. Then, you flash fastboot rom by Mi flash tool. It's very simply. I made it for unbrick my Mi6 several times.
See video here.
Click to expand...
Click to collapse
Is this the only way to put the phone in edl mode?
Yes, it's only way for Mi6, which is locked bootloader.
Hi there XDA-developers
After trying to flash my device ZC550KL with Lineage 15.1 my phone became hardbrick, the phone wasn´t charging, no leds, no logo only a driver bulk under device manager.
After a research i decide to buy a EDL cable and finally found the firmware to flash with QFIL i install the qualcomm driver 64 bits and disable the drivers signatures on my windows 7, next i install the driver for qualcomm 64 bit and appears on my device manager the driver is installed (Qualcomm 9008). Then i decide to flash with qfil and went ok.
After the flash with qfil appear the leds of charging, vibrate, but still no logo.
Next i use Asus Flash Tool and use stock rom (ZC550KL_V12.8.10.56_M3.1.33_WW_Phone-user.raw) and flash with no erros under de software Asus Flash Tool but on my mobile nothing happens.
Now when i try to power up my phone appears a red light on the charging leds.
Any ideas in what i should do next.
Best Regards
Hello
Hope someone can help I cannot find a definitive answer hopefully in layman's terms for this problem.
Redmi Note 8 Pro Bergonia 6gb ram 128gb storage Miui 12 Global
Tried CFW 2020 Anti-Brick Corvus ....., Afterwards Phone booted then went completely dead apart from power light when connected to usb
Came accross SP Flash Tool this did help, phone now boots, all seems ok apart from when in fastboot when connecting usb to PC/laptop (tried several cables with a PC and laptop using USB 2.0 all worked prior to trying CFW) all with same result phone stays in fasboot for approx 20 seconds then reboots. Don't know if this is relevant, if I put the phone into fastboot and do not connect to usb, fastboot remains on. Is there anyway I can install twrp and root, or am I stuffed?
Thanks
Smokes
Smokes68 said:
Hello
Hope someone can help I cannot find a definitive answer hopefully in layman's terms for this problem.
Redmi Note 8 Pro Bergonia 6gb ram 128gb storage Miui 12 Global
Tried CFW 2020 Anti-Brick Corvus ....., Afterwards Phone booted then went completely dead apart from power light when connected to usb
Came accross SP Flash Tool this did help, phone now boots, all seems ok apart from when in fastboot when connecting usb to PC/laptop (tried several cables with a PC and laptop using USB 2.0 all worked prior to trying CFW) all with same result phone stays in fasboot for approx 20 seconds then reboots. Don't know if this is relevant, if I put the phone into fastboot and do not connect to usb, fastboot remains on. Is there anyway I can install twrp and root, or am I stuffed?
Thanks
Smokes
Click to expand...
Click to collapse
1/Try flash with Miflashtool
2/Try unbrick hardbrick method. You can find on many: Youtube, Telegram, Github, XDA,... Keep phone in EDL mode by bypass and flash by Sp flash tool.
Thank you SP flash tool and a newer driver fixed it.
Use USB 2.0 ports. (use usb 2.0 hubs if you dont have usb 2.0 ports)
Install drivers properly (it should say Android Bootloader Interface in Device Manager)