I need to repair my sister's Samsung Note 2. I have used KIES emergency restore but that didn't work, KIES will find the correct model but can't connect to the phone after downloading the necessary files.
Recovery mode on the phone doesn't work neither , it just jumps to download and when doing a normal start up it hangs at the boot logo.
In Odin I'm getting a warning message about pit mapping and then something about a missing PIT file. I've found a PIT file but I'm not sure if it is the correct one. Her phone is a 32 Gb internal storage.
Name of the file I've downloaded: N7100_Mx-MDM_t03g.
Is this the correct one?
I'm flashing the stock rom from Samsung: N7100XXUFNL1_N7100LUXFOA1_N7100XXUFNG1_HOME.tar
Kind regards
Giovanni
Update: the PIT file mentioned earlier didn't work. I got a fail message while flashing.
Does anyone have a pit file for Samsung galaxy note 2 32 gigabyte?
Verstuurd vanaf mijn SM-G935F met Tapatalk
Thread closed.
Since you already posted in the correct thread here
Regards
Vatsal,
Forum Moderator.
Related
In my attempt to play around with the new JSS15J.I317UCUBMJ4 leak to get Wifi working on the I317M, I dont know which part corrupted my PIT so now I cannot access my internal media. I'm not sure if it is the bootloader, PIT or combination of the files I was using but I need a full I317M firmware to unbrick the device (preferably 4.1.2 / RWC).
This was my first time using Heimdall and despite reading through the ReadMe a few times, there were countless problems along the way including driver issues and file formats.
I hope to get a full firmware for the I317M as all the ones on Sammobile do not contain param, sboot, tz, and pit. The most important file for me at the moment is the pit file as I think that would restore access to the internal media, which would make flashing other things much easier for me. I havent tried sideload in TWRP yet but I doubt any solutions to my immediate problem could be solved in recovery.
Anyone who has a I317M, please download a copy of your pit file with the instructions as provided by Zen Arcade below:
Zen Arcade said:
1 - Install the USB drivers for the i317m (from samsung web site)
2 - Download the latest Heimdall package from here - http://www.glassechidna.com.au/products/heimdall/
3 - Extract Heimdall to a folder on your PC and open a command window there
4 - Connect the phone in download mode to your PC. From windows go to the drivers folder and run zadig. Consult the readme or search XDA on instructions on how to configure the heimdall driver. The device you are looking for might be shown as "Gadget Serial" for the i317.
5 - Now go back the the command window you opened and enter the following commands:
5a - heimdall detect [this will tell you whether the interface is working]
5b - heimdall download-pit --output i317m.pit --no-reboot
6 - check your heimdall folder, you should have a file called i317m.pit if everything worked
7 - If this allows you to successfully repartition your phone, upload the resulting pit here for others to use
Click to expand...
Click to collapse
hellocng said:
In my attempt to play around with the new JSS15J.I317UCUBMJ4 leak to get Wifi working on the I317M, I dont know which part corrupted my PIT so now I cannot access my internal media. I'm not sure if it is the bootloader, PIT or combination of the files I was using but I need a full I317M firmware to unbrick the device (preferably 4.1.2 / RWC).
This was my first time using Heimdall and despite reading through the ReadMe a few times, there were countless problems along the way including driver issues and file formats.
I hope to get a full firmware for the I317M as all the ones on Sammobile do not contain param, sboot, tz, and pit. The most important file for me at the moment is the pit file as I think that would restore access to the internal media, which would make flashing other things much easier for me. I havent tried sideload in TWRP yet but I doubt any solutions to my immediate problem could be solved in recovery.
Anyone who has a I317M, please download a copy of your pit file with the instructions as provided by Zen Arcade below:
Click to expand...
Click to collapse
Did you ever find a good download? I am trying to pull a pit file from a newly upgraded i317m Stock 4.3 but it is failing during the pit download... I have another i317m that is in the same boat as yours so any help/info you have would be helpful
Cheers
full flash?
Any progress in acquiring a full flash for this phone?
hellocng said:
In my attempt to play around with the new JSS15J.I317UCUBMJ4 leak to get Wifi working on the I317M, I dont know which part corrupted my PIT so now I cannot access my internal media. I'm not sure if it is the bootloader, PIT or combination of the files I was using but I need a full I317M firmware to unbrick the device (preferably 4.1.2 / RWC).
This was my first time using Heimdall and despite reading through the ReadMe a few times, there were countless problems along the way including driver issues and file formats.
I hope to get a full firmware for the I317M as all the ones on Sammobile do not contain param, sboot, tz, and pit. The most important file for me at the moment is the pit file as I think that would restore access to the internal media, which would make flashing other things much easier for me. I havent tried sideload in TWRP yet but I doubt any solutions to my immediate problem could be solved in recovery.
Anyone who has a I317M, please download a copy of your pit file with the instructions as provided by Zen Arcade below:
Click to expand...
Click to collapse
emutter said:
Any progress in acquiring a full flash for this phone?
Click to expand...
Click to collapse
The pit file is here - http://forum.xda-developers.com/showthread.php?t=2609871
The 4.1.2 and 4.3 stock firmwares are available from sammobile.com and do contain bootloader and tz (and most everything else except param and tombstones).
I've not seen a param file for the i317m... if someone wants to extract them from stock rooted 4.1.2 and 4.3 and share them I will resize and post them.
To do so run these commands from terminal emulator on phone:
Code:
su
dd if=/dev/block/mmcblk0p7 of=/sdcard/param.bin
PM me and let me know what firmware you were running and what specific phone - i.e. i317-rogers or bell or ...
WHAT IS THE USE OF .pit FILE?
.pit FILE IS USED TO DIRECT THE PARTITION OF THE WHOLE ANDROID SYSTEM..JUST LIKE WE ARE DOING GRUB IN PC...HERE ALSO WE NEED TO PARTITION THE SYSTEM FOR FLASHING THE FIRMWARE PROPERLY.. AND HERE THE .PIT IS USED
1. Get your phone into download mode..
2. connect to computer. Make sure that usb drivers installed and you have the firmware.tar file.
3. Now open odin 3.10
4. click on PIT and select ZEROLTE_USA_TMO.pit
5. Make sure that partition is tick
6. click on PDA and select firmware.tar file
7. Now start button and wait...You are done
link:
https://drive.google.com/folderview...tmV3YxMTB4WGpSZU5ReEI1WjZtUXM&usp=sharing_eid
Mhhh could be useful great job Op
The link doesn't work for me, could you reupload it? Also does this contain data about your /data partition? If so this might be specific to your model (16/32/64 GB)
update the file
update the file
SHATTAH said:
update the file
Click to expand...
Click to collapse
Just requested permission for the file.
SHATTAH said:
WHAT IS THE USE OF .pit FILE?
.pit FILE IS USED TO DIRECT THE PARTITION OF THE WHOLE ANDROID SYSTEM..JUST LIKE WE ARE DOING GRUB IN PC...HERE ALSO WE NEED TO PARTITION THE SYSTEM FOR FLASHING THE FIRMWARE PROPERLY.. AND HERE THE .PIT IS USED
1. Get your phone into download mode..
2. connect to computer. Make sure that usb drivers installed and you have the firmware.tar file.
3. Now open odin 3.10
4. click on PIT and select ZEROLTE_USA_TMO.pit
5. Make sure that partition is tick
6. click on PDA and select firmware.tar file
7. Now start button and wait...You are done
link:
https://drive.google.com/folderview...tmV3YxMTB4WGpSZU5ReEI1WjZtUXM&usp=sharing_eid
Click to expand...
Click to collapse
Can you please explain how you got the pit file? from what I understand you cannot simply dump the pit anymore unless I missed something.
requested access to this as well-- can you post somewhere other than Google Drive as people cant get to this file?!
can you please grant my request to download the file? I have a soft bricked phone and I really need the Pit file. thanks so much
looking a pit file for latest firmware 5.1.1 G925TUVU2COF6 does anyone have?
onlineunlocks said:
looking a pit file for latest firmware 5.1.1 G925TUVU2COF6 does anyone have?
Click to expand...
Click to collapse
According to: http://www.droidviews.com/how-to-extract-pit-file-from-samsung-galaxy-devices/
Requirement: To be able to use any of the methods described below [to extract the PIT file], you must have root privilege on your Galaxy device. Both the methods have been tested on the Samsung Galaxy S5.
Click to expand...
Click to collapse
This means that, unless someone gets it directly from Samsung somehow (leak, release, or otherwise), you'll need to wait for root on the 5.1.1 stock ROM.
I don't know a whole lot about the PIT file, and why someone would ever need it (apart from screwing around so much that you overwrite your partition information on the device... which would be hard for the average user to accidentally do).
Have you tried Samsung Smart-Switch? I don't know if it's capable, but it might download the PIT info from the internet before restoring stock firmware on a 100% borked device.
Thank you for the reply; by adb I know does not work without root as I looked over those methods. But there is also Heimdall that should be able to extract the pit while in download mode and has the option to save it,but seems not supporting this device. Also odin performs this tasks " Get PIT for mapping.." ,but does it automatically and there is no option to save from a working device with same details to use on other. I need it for a g925t that is stuck on samsung logo after odin restore and showing in download mode SW rev. check fail. device:2 binari 1 , and I think by flashing with a pit might fix it
onlineunlocks said:
Thank you for the reply; by adb I know does not work without root as I looked over those methods. But there is also Heimdall that should be able to extract the pit while in download mode and has the option to save it,but seems not supporting this device. Also odin performs this tasks " Get PIT for mapping.." ,but does it automatically and there is no option to save from a working device with same details to use on other. I need it for a g925t that is stuck on samsung logo after odin restore and showing in download mode SW rev. check fail. device:2 binari 1 , and I think by flashing with a pit might fix it
Click to expand...
Click to collapse
Let us know if this worked. I need to restore back to 5.0.2 also from 5.1.1. Thanks
will not work to restore to 5.0.2 from what I know and might also damage it,so do not recommend to try that
onlineunlocks said:
Thank you for the reply; by adb I know does not work without root as I looked over those methods. But there is also Heimdall that should be able to extract the pit while in download mode and has the option to save it,but seems not supporting this device. Also odin performs this tasks " Get PIT for mapping.." ,but does it automatically and there is no option to save from a working device with same details to use on other. I need it for a g925t that is stuck on samsung logo after odin restore and showing in download mode SW rev. check fail. device:2 binari 1 , and I think by flashing with a pit might fix it
Click to expand...
Click to collapse
I'm in the same situation.
Have you found a solution?
Aou said:
According to: http://www.droidviews.com/how-to-extract-pit-file-from-samsung-galaxy-devices/
This means that, unless someone gets it directly from Samsung somehow (leak, release, or otherwise), you'll need to wait for root on the 5.1.1 stock ROM.
I don't know a whole lot about the PIT file, and why someone would ever need it (apart from screwing around so much that you overwrite your partition information on the device... which would be hard for the average user to accidentally do).
Have you tried Samsung Smart-Switch? I don't know if it's capable, but it might download the PIT info from the internet before restoring stock firmware on a 100% borked device.
Click to expand...
Click to collapse
is this gonna fix my phone if efs is not mounted??? me and my buddy have no idea how he broke his phone.
I know this is a very stupid question.
Last time I installed a custom rom through Odin.
I also played with the setting and i did a re-partition <-- I know, shoot me if you can
Now i need a PIT file for my MT-T900
Everytime i install the original rom it fails.
Who has the PIT file for me from the SM-T900 ?????
I have totally no experience in pit file restoration because i never was clever enough to do what u did.
Maybe you have something with this files . I looks like one of it is an pit file:
asanfile.com/file?path=samsung%2Fflash%20file%2Fsm%20series%2Fsm-t900%2F
On website:
asanfile.com/file
Choose samsung -----> flash file -------> sm series -----> SM-T900
I give no garantee this is the correct one.
marbee said:
I have totally no experience in pit file restoration because i never was clever enough to do what u did.
Maybe you have something with this files . I looks like one of it is an pit file:
asanfile.com/file?path=samsung%2Fflash%20file%2Fsm%20series%2Fsm-t900%2F
On website:
asanfile.com/file
Choose samsung -----> flash file -------> sm series -----> SM-T900
I give no garantee this is the correct one.
Click to expand...
Click to collapse
Thanks for the replay and te link.
It has partly worked. I was able to install the original rom but still got the fail error.
It was clearly not the correct pit file.
My device worked but i wa snot happy.
Afther this i was looking futher in to the problem and found a new program that samsung is using for it's devices.
It's called Smart Switch. I used this program to do a emergency recovery of my device and it worked. The program did a new re-partition of my device.
Many thanks.
Does anyone have the pit file for Galaxy Tab Pro 8.4 wifi (sm-t320)?
My tablet is stuck in error mode telling me to connect to kies
Download a multiple Rom from Samsung.
Unzip the Rom.
copy the CSC file to a seperate folder and unzip the CSC file , so you have got the PIT file for flashing.
Samsung Galaxy tab pro SM t525
Error while trying to flash Firmware
no pit file
Pls see Pictures
Ps help
PS: I was able to install TWRP
but I don't Know HoTo get further
Witzker said:
Samsung Galaxy tab pro SM t525
Error while trying to flash Firmware
no pit file
Pls see Pictures
Ps help
PS: I was able to install TWRP
but I don't Know HoTo get further
Click to expand...
Click to collapse
I've the same problem now,
have solved the problem?
Thanks
alonzimanuel said:
I've the same problem now,
have solved the problem?
Thanks
Click to expand...
Click to collapse
Afaik you need the multiple! part stock file for this:
The pit file is inside the CSC stock file and can be extracted by ->
delete .md5 from the extension
open the remaing CSC......tar file
copy pit to desktop
When in Odin give it the place where the pit file is and check "repartiton".
bmwdroid said:
Afaik you need the multiple! part stock file for this:
The pit file is inside the CSC stock file and can be extracted by ->
delete .md5 from the extension
open the remaing CSC......tar file
copy pit to desktop
When in Odin give it the place where the pit file is and check "repartiton".
Click to expand...
Click to collapse
Really thanks to you!
alonzimanuel said:
Really thanks to you!
Click to expand...
Click to collapse
I hope it helps.
Please keep us updated
btw. Idk if windows can open tar files as I do all preparations in Linux before using Odin in Windows.