Related
hi. I encountered a problem on my phone that doesn't boot properly.
When i tried to switch on my phone it showed at first the welcome msg "Samsung S4 mini gt-i9192" then after that, a pitch black screen, could not properly boot. But i learn that it does not turns off after the screen turns all black, i have to press the power button first to turn off the phone.
This problem started when i installed an app with some compatibility problems.
I wanted to root my phone hoping that can solve the problem, but then again a problem occurred when i tried to connect my phone to my laptop. It fails to install MTP usb device to my computer. I tried connecting it again provided that samsung kies was installed but again failed to connect my phone. Therefore i cant root my phone because i cant copy the files needed to root to my phone sd card.
I tried reinstalling kies, installing mtp drivers but nothing happened. I tried also restoring the previous boot image, restoring factory settings using recovery mode. But then problem still exist.
And fyi my phone can't mount any external sd card using recovery mode. And i think it was not in a debugging mode.
Phone: samsung s4 mini gt-i9192
firmware: i dont know
So basically, the problem is:
my phone wont boot,
i cant connect it to my pc
and i cant root it.
How should i root or even flash my phone when i cant connect to my computer? Do you have any idea on how to solve this problem? Any solutions or suggestions would be much appreciated. tnx.
champagneerantja
emzgames said:
snipped.
Click to expand...
Click to collapse
Have you tried putting the phone in download mode (Volume Down + Home + Power) and then connecting it your p,c , if not give this a shot it should pick up the drivers , once done , take out the usb cable hold the power the button to shut down and boot up .
since you have not mentioned your OS am assuming it is windows , try taking out Kies via some software like revo uninstaller which will remove all directories plus all registry entires then reinstall it if you really need it.
dovakinn said:
Have you tried putting the phone in download mode (Volume Down + Home + Power) and then connecting it your p,c , if not give this a shot it should pick up the drivers , once done , take out the usb cable hold the power the button to shut down and boot up .
since you have not mentioned your OS am assuming it is windows , try taking out Kies via some software like revo uninstaller which will remove all directories plus all registry entires then reinstall it if you really need it.
Click to expand...
Click to collapse
tried both yet still unable to connect.
emzgames said:
tried both yet still unable to connect.
Click to expand...
Click to collapse
dial *#0808# from your cell this would take you in usb settings, tick both mtp+adb , reboot , if they art already ticked uncheck them and check them again.
dovakinn said:
dial *#0808# from your cell this would take you in usb settings, tick both mtp+adb , reboot , if they art already ticked uncheck them and check them again.
Click to expand...
Click to collapse
im afraid i cant do this coz i cant boot my phone properly, up to welcome msg only then screen black out, but not power off.
emzgames said:
im afraid i cant do this coz i cant boot my phone properly, up to welcome msg only then screen black out, but not power off.
Click to expand...
Click to collapse
ohhh best take your cell to your nearest service center then . if you can't flash anything and usb is not getting detected i don't see any other option , maybe someone more experienced here can help.
dovakinn said:
ohhh best take your cell to your nearest service center then . if you can't flash anything and usb is not getting detected i don't see any other option , maybe someone more experienced here can help.
Click to expand...
Click to collapse
yah, thats what im thinking. i just brought this here hoping to solve this problem without going to a shop. thanks anyway.
aac. To me put your phone in download mode then use moborobo(a windows software) . Just open it and it will install the driver. If it dies not work then use adb installer . Remember you should have only any one of the software at one tim means either moborobo or kies or adb installer
Sent from my GT-I9001 using xda app-developers app
btw have you tried to boot the phone in safe mode ?? if it boots in safe mode it is still fixable without going to service center. power down , power up+ tap the menu button 3 or 4 times at THE same time to boot into safe mode if it boots into safe mode that means the hardware and OS is fine if it does not well then your out of luck.
dovakinn said:
btw have you tried to boot the phone in safe mode ?? if it boots in safe mode it is still fixable without going to service center. power down , power up+ tap the menu button 3 or 4 times at THE same time to boot into safe mode if it boots into safe mode that means the hardware and OS is fine if it does not well then your out of luck.
Click to expand...
Click to collapse
tnx man, but no luck..
Tried flashing a custom rom?
Good day!
After searching everywhere in the web and using different methods, I decided to create an account and ask you guys how to solve my problem
Basically, I have a HTC Desire HD phone, this is unlocked, rooted and using cm-Jellytime_42_R11 ROM. I decided to change ROM and go back to Android Revolution. What I did first was I deleted a couple of folders in my clockwork folder, I deleted both backup to free space. Afterwards, I was trying to connect my phone to my laptop but to no avail (it only charged) then I decided to just boot into recovery. After a couple of tries trying to access and going to bootloader/recovery mode it just wont push through. So I decided to normal boot, then the phone won't boot anymore. It just hanged in the Jellytime loading screen.
Note: I removed the battery a couple of too many times since I was trying to boot into recovery.
Thanks in advance to anyone who can help me with this problem
I didn't understand very well.
Can you now go to Hboot screen volume (-) + power button?
And where you get now stucked when you just power on phone?
Gussta said:
I didn't understand very well.
Can you now go to Hboot screen volume (-) + power button?
And where you get now stucked when you just power on phone?
Click to expand...
Click to collapse
no, i couldnt go to Hboot while holding down volume - and power.
The phone gets stucked in the Jellytime loading screen. It just stops. help me please
What does it do when you try to go to hboot? Is it detected in fastboot? Is it detected in adb when you try to boot normally?
bananagranola said:
What does it do when you try to go to hboot? Is it detected in fastboot? Is it detected in adb when you try to boot normally?
Click to expand...
Click to collapse
it does nothing. It just cant go to hboot. it wont normal boot too. so stuck.
richardrip10 said:
it does nothing. It just cant go to hboot. it wont normal boot too. so stuck.
Click to expand...
Click to collapse
WHen it getts stuck in the roms boot animation, connect usb to the phone and try
Code:
adb devices
Most devices show up via adb during the boot animation.
If the device shows up there, enter
Code:
adb reboot bootloader
then go here and download 4ext recovery.
extract the .img file from the zip. Rename it to recovery.img and place it in your adb directory and enter this whiles in fastboot
Code:
fastboot devices
to make sure your device shows up
then
Code:
fastboot flash recovery recovery.img
after it has successfully flashed reboot to recovery ad try and flash the rom u want.
hope i helped. Click on the thanks buttton.
You can ask if you still have problems.
computer doesn't recognize android. laptop doesnt even make sound that a device has been connected. I checked the device manager but to no avail. but the phone is charging.
richardrip10 said:
computer doesn't recognize android. laptop doesnt even make sound that a device has been connected. I checked the device manager but to no avail. but the phone is charging.
Click to expand...
Click to collapse
What recovery were you using before this happened?
mickeyasamoah said:
What recovery were you using before this happened?
Click to expand...
Click to collapse
cwm sir.
richardrip10 said:
cwm sir.
Click to expand...
Click to collapse
I dont know if this is going to work with CWM but it works on TWRP and 4ext.
Remove the battery and re-insert it.
Now connect the usb to the device.
Dont press the power button.(leave it off)
After the the charging light comes on, the device should be discoverable by adb.
Now try
Code:
adb devices
It should be detected by adb.
mickeyasamoah said:
I dont know if this is going to work with CWM but it works on TWRP and 4ext.
Remove the battery and re-insert it.
Now connect the usb to the device.
Dont press the power button.(leave it off)
After the the charging light comes on, the device should be discoverable by adb.
Now try
Code:
adb devices
It should be detected by adb.
Click to expand...
Click to collapse
sorry, it still didn't work. Is this a bricked phone?
mickeyasamoah said:
I dont know if this is going to work with CWM but it works on TWRP and 4ext.
Remove the battery and re-insert it.
Now connect the usb to the device.
Dont press the power button.(leave it off)
After the the charging light comes on, the device should be discoverable by adb.
Now try
Code:
adb devices
It should be detected by adb.
Click to expand...
Click to collapse
btw, my computer really cant detect my phone. It doesnt make any sound when it is connected through USB. but other devices can be detected by my computer. I tried inserting the usb into a 2.0 and 3.0 usb.
mickeyasamoah said:
I dont know if this is going to work with CWM but it works on TWRP and 4ext.
Remove the battery and re-insert it.
Now connect the usb to the device.
Dont press the power button.(leave it off)
After the the charging light comes on, the device should be discoverable by adb.
Now try
Code:
adb devices
It should be detected by adb.
Click to expand...
Click to collapse
hey bro, I actually made it work. problem is when im flashing the recovery, it shows Failed<remote: not allowed>
what should I do?
mickeyasamoah said:
I dont know if this is going to work with CWM but it works on TWRP and 4ext.
Remove the battery and re-insert it.
Now connect the usb to the device.
Dont press the power button.(leave it off)
After the the charging light comes on, the device should be discoverable by adb.
Now try
Code:
adb devices
It should be detected by adb.
Click to expand...
Click to collapse
no worries now brother! was able to fix my phone now! THANK YOU SO MUCH! :good::good::good:
richardrip10 said:
no worries now brother! was able to fix my phone now! THANK YOU SO MUCH! :good::good::good:
Click to expand...
Click to collapse
Okay Brother.. Guess you should post how you fixed it in the OP so that others with the same problem can look it up.
mickeyasamoah said:
Okay Brother.. Guess you should post how you fixed it in the OP so that others with the same problem can look it up.
Click to expand...
Click to collapse
Ok, so basically, the problem why i can't do the power button + vol (-) is that my volume buttons are broken. (sad) Second, the reason why my computer wasn't detecting my phone is that my phone's charging slot is dirty and I had to clean it with a needle to remove the dust, at the same time, the cable I was using was broken. When I was able to clean the slot and change cables, I then followed the steps by mickeyasamoah (thanks bro) with the adb procedures. Although it failed when it was in the flash recovery line (dunno why), I just proceeded into flashing a new ROM and voila, it worked.
richardrip10 said:
Ok, so basically, the problem why i can't do the power button + vol (-) is that my volume buttons are broken. (sad) Second, the reason why my computer wasn't detecting my phone is that my phone's charging slot is dirty and I had to clean it with a needle to remove the dust, at the same time, the cable I was using was broken. When I was able to clean the slot and change cables, I then followed the steps by mickeyasamoah (thanks bro) with the adb procedures. Although it failed when it was in the flash recovery line (dunno why), I just proceeded into flashing a new ROM and voila, it worked.
Click to expand...
Click to collapse
I am happy i was able to help.
Instead of saying thanks only, you could actually hit the thanks button.
Have a nice day.
I have just flash the custom 5.0.2 ROM using philz touch 6.48.4.
After I flashed the ROM, I reboot to the philz recovery and flashed back to cwm 6.0.4.8.
However, the device stuck on the LG logo screen.
I have try to enter Download mode/Emergence mode/Hard reset mode/Recovery, but all of them I cannot go into.
Please help! Thank you for your helping!!
pchuen said:
I have just flash the custom 5.0.2 ROM using philz touch 6.48.4.
After I flashed the ROM, I reboot to the philz recovery and flashed back to cwm 6.0.4.8.
However, the device stuck on the LG logo screen.
I have try to enter Download mode/Emergence mode/Hard reset mode/Recovery, but all of them I cannot go into.
Please help! Thank you for your helping!!
Click to expand...
Click to collapse
Your boot loader is broken. Gonna have to get to the down load mode and reinstall either the or the stock. You can probably flash the recovery with .IMG file with lg flashing tool. Nerdy blond's twrp is one of those files that you can use. You can even try installing it first with the adb shell command, you can get the instructions at the same place where you download.
http://forum.xda-developers.com/showthread.php?t=3144369
hawkwind212 said:
Your boot loader is broken. Gonna have to get to the down load mode and reinstall either the or the stock. You can probably flash the recovery with .IMG file with lg flashing tool. Nerdy blond's twrp is one of those files that you can use. You can even try installing it first with the adb shell command, you can get the instructions at the same place where you download.
http://forum.xda-developers.com/showthread.php?t=3144369
Click to expand...
Click to collapse
Thank you for replying.
I cannot do anythings since I cannot enter into download mode.
I pressed volume key + and - and insert the usb cable to computer. There is nothing happened, computer dose not show the devices attached and the phone stay in the LG logo screen.
Also, I cannot use adb commands to force the phone enters into download mode as it shows nothings under "List of devices".
Is there any methods I can go into the download mode???
Thank you!
pchuen said:
Thank you for replying.
I cannot do anythings since I cannot enter into download mode.
I pressed volume key + and - and insert the usb cable to computer. There is nothing happened, computer dose not show the devices attached and the phone stay in the LG logo screen.
Also, I cannot use adb commands to force the phone enters into download mode as it shows nothings under "List of devices".
Is there any methods I can go into the download mode???
Thank you!
Click to expand...
Click to collapse
If your phone shows LG start screen, it should go into Download mode. I had similar problem few days ago while I was testing some kernel patches, it just froze on the LG screen. Solution was to unplug it, remove it's battery, SIM & SD (you don't have to remove SIM & SD, I just work that way) , make sure it's off, return battery back, press Vol + & Vol - at the same time and plug-in the USB cable.
Before that, make sure you have installed LG Unified driver (can be obtained via LG's software from support site), because without that Windows won't recognise your device.
After that, once you make your phone usable with Freegee/whatever you use to install initial recovery, flash official TWRP, because others are too old - that Philz CWM is old but still working with Lollipop but not work good and is tends to lock itself into a bootloop if you use hardware keys to enter; that other one, from GPRO_recovery APK is not supported and not working well (for me since day one), so it should be replaced as soon as possible.
Also, I can suggest you to flash your phone from stock 4.1 (not KitKat), root, flash recovery via freegee and after reboot update to latest official TWRP via Flashify.
hawkwind212 said:
Your boot loader is broken. Gonna have to get to the down load mode and reinstall either the or the stock. You can probably flash the recovery with .IMG file with lg flashing tool. Nerdy blond's twrp is one of those files that you can use. You can even try installing it first with the adb shell command, you can get the instructions at the same place where you download.
http://forum.xda-developers.com/showthread.php?t=3144369
Click to expand...
Click to collapse
ShadySquirrel said:
If your phone shows LG start screen, it should go into Download mode. I had similar problem few days ago while I was testing some kernel patches, it just froze on the LG screen. Solution was to unplug it, remove it's battery, SIM & SD (you don't have to remove SIM & SD, I just work that way) , make sure it's off, return battery back, press Vol + & Vol - at the same time and plug-in the USB cable.
Before that, make sure you have installed LG Unified driver (can be obtained via LG's software from support site), because without that Windows won't recognise your device.
After that, once you make your phone usable with Freegee/whatever you use to install initial recovery, flash official TWRP, because others are too old - that Philz CWM is old but still working with Lollipop but not work good and is tends to lock itself into a bootloop if you use hardware keys to enter; that other one, from GPRO_recovery APK is not supported and not working well (for me since day one), so it should be replaced as soon as possible.
Also, I can suggest you to flash your phone from stock 4.1 (not KitKat), root, flash recovery via freegee and after reboot update to latest official TWRP via Flashify.
Click to expand...
Click to collapse
Thank you for your detail reply.
I have tried to reinstall the LG driver and try to enter download mode again.
The screen is still stuck on LG logo and I cannot find the device in hardware manager (cannot recognize it).
I cannot do anythings until it can recognize it.
(Is it the bootloader is broken? and can I fix it?)
Thank you very much and waiting for your reply soon.:good:
pchuen said:
Thank you for your detail reply.
I have tried to reinstall the LG driver and try to enter download mode again.
The screen is still stuck on LG logo and I cannot find the device in hardware manager (cannot recognize it).
I cannot do anythings until it can recognize it.
(Is it the bootloader is broken? and can I fix it?)
Thank you very much and waiting for your reply soon.:good:
Click to expand...
Click to collapse
Which version of Windows are you using? It should be displayed under Serial ports in Device manager (named something like LGE Serial device) and LGFlashTool should recognise it immediately. I can't make you a screenshot/check for real name because I'm running Linux right now and can't reboot.
Also, try with another cable/port, remove all other android drivers you may have (Samsung's, Google's...) and disable antivirus.
ShadySquirrel said:
Which version of Windows are you using? It should be displayed under Serial ports in Device manager (named something like LGE Serial device) and LGFlashTool should recognise it immediately. I can't make you a screenshot/check for real name because I'm running Linux right now and can't reboot.
Also, try with another cable/port, remove all other android drivers you may have (Samsung's, Google's...) and disable antivirus.
Click to expand...
Click to collapse
It does not work on Windows 7 and XP.
I did not find any LGE XXX under Serial ports part.
Thank you!
pchuen said:
It does not work on Windows 7 and XP.
I did not find any LGE XXX under Serial ports part.
Thank you!
Click to expand...
Click to collapse
Hm.... Phone shows that it have entered download mode? Black screen, centered gray message and "DOWNLOAD MODE" red text?
ShadySquirrel said:
Hm.... Phone shows that it have entered download mode? Black screen, centered gray message and "DOWNLOAD MODE" red text?
Click to expand...
Click to collapse
No... nothing happens, just showing LG logo...
pchuen said:
No... nothing happens, just showing LG logo...
Click to expand...
Click to collapse
OK, it doesn't enter download mode. So, step by step:
- remove battery and leave it for 15-30 seconds, return battery
- press Vol+ and Vol- at the same time and keep them pressed,
- plug USB cable in while keys are pressed
It should immediately put you into download mode, with no LG screen, just black screen with gray box and red text I've described to you.
ShadySquirrel said:
OK, it doesn't enter download mode. So, step by step:
- remove battery and leave it for 15-30 seconds,
- press Vol+ and Vol- at the same time and keep them pressed,
- plug USB cable in while keys are pressed
It should immediately put you into download mode, with no LG screen, just black screen with gray box and red text I've described to you.
Click to expand...
Click to collapse
I understand what download mode screen is.
I followed your methods, bur I still cannot enter it and the computer cannot recognize that.
Sorry for disturbing :crying:
pchuen said:
I understand what download mode screen is.
I followed your methods, bur I still cannot enter it and the computer cannot recognize that.
Sorry for disturbing :crying:
Click to expand...
Click to collapse
So, whatever you try to do, phone just shows LG logo, not even a message in an upper left corner?
I'm running out of ideas. I have exact same variant (E988) but only time it didn't want to enter download mode this way was when cable I was using was broken...
ShadySquirrel said:
So, whatever you try to do, phone just shows LG logo, not even a message in an upper left corner?
I'm running out of ideas. I have exact same variant (E988) but only time it didn't want to enter download mode this way was when cable I was using was broken...
Click to expand...
Click to collapse
I have changed the cable, but it is the same.
Hi everyone. Just like in the title of my post. I've just bought a TP-LINK NEFFOS Y5L smartphone, and I started to looking information, how I can get root for this device. And I found it:
https://morfitronik.pl/android-root-smartfona-neffos-y5l-tp-link/
Sad that this site is`t online anymore, but u can find it on github or gitlab.
I've flash this recovery, and it's working fine. The next step to root was to download the zip package from the chainfire site (currently abandoned, but u may use magisk from xda) :
https://download.chainfire.eu/1021/SuperSU/SR3-SuperSU-v2.79-SR3-20170114223742.zip
Latest MAGISK:
https://github.com/topjohnwu/Magisk/releases/download/v16.0/Magisk-v16.0.zip
Well, I've done it. It's working, and I have root on Android 6.1.
Here it is :
View attachment recovery-neffos-y5l-tp-link-twrp.apk
u will have to change extention of file from *.apk to *.img due to xda registration of size file uploaded.
Tutorial how to do this:
https://youtu.be/SfkbkcXSa2M
And if u want to buy me a beer, that is my account number:
PL 37 1020 4317 0000 5402 0389 9689
IBAN BPKOPLPW
Thanks a lot for your support.
How did you flash that twrp recovery...:laugh:
I just flash this recovery via fastboot mode.
TuanPengarah said:
How did you flash that twrp recovery...:laugh:
Click to expand...
Click to collapse
U may also try to boot your phone in this recovery throu fastboot boot image.img
Hello,
I am a bit new... It seems I can't use flashboot mode.
I have DL ADB, then when I key : /adb devices, I see my Y5L.
Then I try to relaunch my device by pressing the VOL + / Restart button => I reach a picture of android and 3 japanese (or chinese characters).
When I plug the device to my PC, it seems that nothing happen (like it was not recognised by the PC).
Du you have any idea?
Best regards
Hello. It is a very annoying thing, but also very simple to solve. If u see the broken robot when u trying to enter to recovery, u must push and hold power button and short press vol+. But if you want to go to recovery or fastboot mode, u don't have to power down your phone. Just go to cmd (or whatever) console and write:
" adb reboot recovery" to boot up you device in recovery mode or
"and reboot bootloader" to boot into fastboot mode
Seeia.
Greetings!
The custom TWRP link does not seem to work as it should be. Either that or I am missing something
Could you please re-upload the recovery file?
Thanks!
"edit: I found it"
Can someone write a tutorial please, it's the first time i try to root with TWRP and i don't understand if the bootloader method for emample is from the device or from the pc because i can enter to the official android device (Y5L ANDROID 6.0.1 ) recovery menu but when i choose to boot at bootloader the phone freeze at the logo. Thanks a lot for any help.
Calaad said:
Hello,
I am a bit new... It seems I can't use flashboot mode.
I have DL ADB, then when I key : /adb devices, I see my Y5L.
Then I try to relaunch my device by pressing the VOL + / Restart button => I reach a picture of android and 3 japanese (or chinese characters).
When I plug the device to my PC, it seems that nothing happen (like it was not recognised by the PC).
Du you have any idea?
Best regards
Click to expand...
Click to collapse
1. pressing the VOL up + Power button => reached a picture of android and 3 Chinese characters (means no command !)
2. pressing again the VOL up + Power button => then you will reached recovery mode.
I had seem this polish method but I get afraid because there is no method to recovery to original rom.
I hope to see a custom rom in next days.
thanks
Hi, I'm trying to install the custom bootloader but after running:
abd reboot bootloader
the phone gets stuck on the tp-link logo.
Trying with volume-up + power shows the broken android logo, from there, holding power + vol-up gets me to recovery but neither fastboot nor adb detect the device. Selecting the "reboot to bootloader" option there ends in the same lock on the tp-link logo.
(I did activate the "unlock bootloader" in developer options.)
Any ideas on how to proceed? thx in advance.
TieSKey said:
Hi, I'm trying to install the custom bootloader but after running:
abd reboot bootloader
the phone gets stuck on the tp-link logo.
Trying with volume-up + power shows the broken android logo, from there, holding power + vol-up gets me to recovery but neither fastboot nor adb detect the device. Selecting the "reboot to bootloader" option there ends in the same lock on the tp-link logo.
(I did activate the "unlock bootloader" in developer options.)
Any ideas on how to proceed? thx in advance.
Click to expand...
Click to collapse
Yeah i also had this problem, open at the android menu your phone and make sure you have enable developer settings and USB Debugging, install Wondershare MobileGo at your pc ( you don't need to install the app at your phone) and connect your phone with the pc, wait to find the drivers at the charge usb selection and after that swap from your phone to all 4 settings of usb connections, mobilego will download 4 drivers total and after that it will read it.
I cant post a link but if you have Chrome to translate from polish to english there is a new simple tutorial, go at the first link at the op post and at the site click at the red text at the beginning next to "twrp" text and translate to english for guide.
sixdiceray said:
Yeah i also had this problem, open at the android menu your phone and make sure you have enable developer settings and USB Debugging, install Wondershare MobileGo at your pc ( you don't need to install the app at your phone) and connect your phone with the pc, wait to find the drivers at the charge usb selection and after that swap from your phone to all 4 settings of usb connections, mobilego will download 4 drivers total and after that it will read it.
I cant post a link but if you have Chrome to translate from polish to english there is a new simple tutorial, go at the first link at the op post and at the site click at the red text at the beginning next to "twrp" text and translate to english for guide.
Click to expand...
Click to collapse
That worked fine. Weird there's no official drivers for download.
Thx.
TieSKey said:
That worked fine. Weird there's no official drivers for download.
Thx.
Click to expand...
Click to collapse
NP and maybe there is but i didn't find any official mobile app management tool from tplink to download.
Thx!
A little offtopic but, any idea on how to enable diagnostic usb port on this device? Nothing in this guide worked so far: https://forum.xda-developers.com/galaxy-s5/general/how-to-add-rf-lte-frequency-bands-to-t2886059
hi
Why does not this mobile display the number of unread messages (sms)?
Why can not I choose one or two SIM cards in my message program?
Why does not the percentage of battery remaining up the screen?
Why does gps work too slowly?
I Have Successfully installed TWRP But when restart TWRP I got blank image
I have successfully install but when reboot recovery I got blank image that have don't show TWRP Logo
How to root!?
Whit out pc?
Hi guys i have a problem , today when i wanna turn on my phone using power button i have the screen logo razer and the message " download mode " in the upper part . I ve tried to reboot the phone but the same issue keep comming im stuck in the download mode screen again & again ... Can u please help me with this problem .
You need to use fastboot to fix it.
Command is "fastboot set_active a && fastboot reboot"
thx for the reply ! , i did what u told me to do but i have the following message :
Setting current slot to "a"
FAILED ( remote: Slot change is not allowed in lock state
)
finished total time : 0.002s
And my phone is the same as before ... Why ?
Hi, I had this with my Razer and I fixed it by flashing a different set of files. I tried debranding my Three UK handset by flashing the original global files MR1, but it wouldn't boot. Flashing MR3 fixed it for me
Its seems ( from the error message ) my bootloader its locked , and i have not enabled usb debugging before ...what can i do ?
Send the phone to razer
I have no other choice ?
Maaviss said:
I have no other choice ?
Click to expand...
Click to collapse
Flash factory images. RMAing a phone should never be first choice.
You should be able to factory reset this way and it should boot. It won't flash important or critical files tho and you'll lose data/ internal sdcard.
Maaviss said:
Hi guys i have a problem , today when i wanna turn on my phone using power button i have the screen logo razer and the message " download mode " in the upper part . I ve tried to reboot the phone but the same issue keep comming im stuck in the download mode screen again & again ... Can u please help me with this problem .
Click to expand...
Click to collapse
If you can get to download mode then why can't you get to recovery and factory reset?
tabletalker7 said:
If you can get to download mode then why can't you get to recovery and factory reset?
Click to expand...
Click to collapse
Dunno , i press both the power button and volume " + " when the usb cable is plug but the phone keep rebooting on the same screen :
Factory reset is possible when the bootloader is locked and usb debugging not enabled ?
Maaviss said:
Dunno , i press both the power button and volume " + " when the usb cable is plug but the phone keep rebooting on the same screen :
Factory reset is possible when the bootloader is locked and usb debugging not enabled ?
Click to expand...
Click to collapse
Factory reset is an option is recovery. Gotta get to recovery
Have you tried flashing the stock img?
Yes , at the end of the operation and all data have been flashed the comand prompt automatically closed and my phone reboot at the same time . But that " download screen keep appeared again ... it seem the flashing don't resolve my problem at all ( maybe because the bootloader is lock or USB debugging not enabled ? )
My fastboot driver are to date because I can send the command " fastboot reboot" to reboot my phone . Also when i send the command " fastboot devices " my phone appear bellow the line with numbers so I think it's ok .
I've noticed the flashing process and the command prompt seems to stop and rebooting my phone when " user data flashing ( something like that ) " appear in the command prompt during the flashing , dunno where it come from ...
P.S : like I said before , sorry for my English ^^ ...
Maaviss said:
Dunno , i press both the power button and volume " + " when the usb cable is plug but the phone keep rebooting on the same screen :
Factory reset is possible when the bootloader is locked and usb debugging not enabled ?
Click to expand...
Click to collapse
Try turning off the phone. Plug the cable to a computer, then as the phone is off, hold down volume + then plug the cable. Do not press the power button. Try a hard reset when in download mode by holding the power button and volume + for more than 10 sec.
---------- Post added at 08:55 PM ---------- Previous post was at 08:52 PM ----------
Maaviss said:
Yes , at the end of the operation and all data have been flashed the comand prompt automatically closed and my phone reboot at the same time . But that " download screen keep appeared again ... it seem the flashing don't resolve my problem at all ( maybe because the bootloader is lock or USB debugging not enabled ? )
My fastboot driver are to date because I can send the command " fastboot reboot" to reboot my phone . Also when i send the command " fastboot devices " my phone appear bellow the line with numbers so I think it's ok .
I've noticed the flashing process and the command prompt seems to stop and rebooting my phone when " user data flashing ( something like that ) " appear in the command prompt during the flashing , dunno where it come from ...
P.S : like I said before , sorry for my English ^^ ...
Click to expand...
Click to collapse
If your phone seems to show up in adb devices it's probably fine but try uninstalling adb fastboot and redo the installation of adb and fastboot.
iliais347 said:
Try turning off the phone. Plug the cable to a computer, then as the phone is off, hold down volume + then plug the cable. Do not press the power button. Try a hard reset when in download mode by holding the power button and volume + for more than 10 sec.
---------- Post added at 08:55 PM ---------- Previous post was at 08:52 PM ----------
If your phone seems to show up in adb devices it's probably fine but try uninstalling adb fastboot and redo the installation of adb and fastboot.
Click to expand...
Click to collapse
Tested , the result is :
List of devices attached
* daemon not running ; starting now at tcp:5037
* daemon started successfully
so , its ok ?
Maaviss said:
Tested , the result is :
List of devices attached
* daemon not running ; starting now at tcp:5037
* daemon started successfully
so , its ok ?
Click to expand...
Click to collapse
If you run adb devices and get a serial number then that means adb is communicating. How many different button combinations have you tried to help kick it to recovery or something. Have you tried adb reboot recovery in download mode to see if it enters recovery?
iliais347 said:
If you run adb devices and get a serial number then that means adb is communicating. How many different button combinations have you tried to help kick it to recovery or something. Have you tried adb reboot recovery in download mode to see if it enters recovery?
Click to expand...
Click to collapse
All combinaison have been tested with plug and unplugged USB cable .
I have tried the command " adb reboot recovery " and I have the message " no emulation devices found ( something like that ) ...
Maaviss said:
All combinaison have been tested with plug and unplugged USB cable .
I have tried the command " adb reboot recovery " and I have the message " no emulation devices found ( something like that ) ...
Click to expand...
Click to collapse
Adb devices returns your devices serial number right?
And how did you set up adb? Did you use the simple installer that just requires you to type "y" ?
Mine is broke too same thing..
Maaviss said:
Hi guys i have a problem , today when i wanna turn on my phone using power button i have the screen logo razer and the message " download mode " in the upper part . I ve tried to reboot the phone but the same issue keep comming im stuck in the download mode screen again & again ... Can u please help me with this problem .
Click to expand...
Click to collapse
Dashaquavius said:
Mine is broke too same thing..
Click to expand...
Click to collapse
Have you tried the following?
Get the factory images, edit the "flash_all.bat"
Go to the line "%fastboot_cmd% erase userdata"
And add a pound "#" sign before it
Like this
###%fastboot_cmd% erase userdata.
Or just remove the entire line.
Save it and flash the images using the .bat file.
Doing the above will stop the factory images from erasing your internal storage.
Let me know how it goes.