Hello,
I have a nexus 7 2013 and have just flashed twrp 3.0.2-0 recovery and have a problem.
I used adb to go to bootloader, and then unlocked it
flashed recovery image then used fastboot reboot.
tablet starts, shows teamwin startup page, goes to screen "Running openrecovery script"
then after a few seconds reboots and then the whole process repeats.
any ideas?
ok, so here is how i fixed it.
extracted recovery.img from the stock image (MOB30X) and reflashed it to the device, restarted and set up as new.
reflashed TWRP and it restarted ok.
have since flashed Nougat rom and gapps (so far so good).
Related
my tmob s4 is stuck on boot screen i tried to update twrp from twrp manager and it said unsuccessful and ask to reboot into recovery i said yes and it rebooted and now when it goes to boot screen and says on top in little blue words botting recovery it just stays there what can i do?
i tried battery pull and Manually going into recovery nothing seems to work plz help.
UPDATE: odin latest firmware NK2 working great!
The lateat version of twrp is borked. Its what caused your problem.
Any previous version will work fine
Hey everyone, i got a neat little problem with my one X.
I wanted to install Resurrection Remix LP v5.5.0 according to this Thread.
So first of all I flashed twrp 2.6.3.0 to my phone and tried to install RR 5.5.0., which threw me an error (because of layout differences).
I moved on by flashing another recovery twrp2811.BiG to my phone and booted into it, np. So i wiped everything, I think it was the advanced wipe option, I ticked every checkbox and swiped to wipe.
After a short time my phone blackscreened back into the bootloader and when I tried to enter recovery again, it displays the twrp logo for a short time, then crashes and reboots.
Since theres no Android to boot, it repeats it's bootloop. I tried flashing twrp2853-BiG, twrp-2.6.3.0-endeavoru,twrp-2.6.1.0-endeavoru. Fastboot flashes the recoveries and right before my phone restarts it even shows the correct "recovery splash screen" according to the current recovery image flashed.
When I flash recovery-clockwork-touch-6.0.4.8-endeavoru and boot into recovery everythin works, but I can't manage to mount my USB storage anymore.
But that almost doesn't matter since I need twrpXXXXBiG to flash the latest Resurrection Rom, but I cant get any twrp recovery back to work (erase cache didn't help at all).
Lip0ly said:
Hey everyone, i got a neat little problem with my one X.
I wanted to install Resurrection Remix LP v5.5.0 according to this Thread.
So first of all I flashed twrp 2.6.3.0 to my phone and tried to install RR 5.5.0., which threw me an error (because of layout differences).
I moved on by flashing another recovery twrp2811.BiG to my phone and booted into it, np. So i wiped everything, I think it was the advanced wipe option, I ticked every checkbox and swiped to wipe.
After a short time my phone blackscreened back into the bootloader and when I tried to enter recovery again, it displays the twrp logo for a short time, then crashes and reboots.
Since theres no Android to boot, it repeats it's bootloop. I tried flashing twrp2853-BiG, twrp-2.6.3.0-endeavoru,twrp-2.6.1.0-endeavoru. Fastboot flashes the recoveries and right before my phone restarts it even shows the correct "recovery splash screen" according to the current recovery image flashed.
When I flash recovery-clockwork-touch-6.0.4.8-endeavoru and boot into recovery everythin works, but I can't manage to mount my USB storage anymore.
But that almost doesn't matter since I need twrpXXXXBiG to flash the latest Resurrection Rom, but I cant get any twrp recovery back to work (erase cache didn't help at all).
Click to expand...
Click to collapse
Just had an similar issue,
Try flashing first boot.img from the rom you will flash
then flash the recovery twrp big
then do the wipes ..
then flash boot.img and then rom
I thought this worked for me. (i flashed with the unboxed rom)
Just tried it, didn't work for me.
Bump
I just flashed the July security update, MTC19Z, using the flash-all script that it comes with then flashed TWRP 3.0.2 before the first boot and it never went to the boot screen with the Google logo, just on the warning page about my OS not being able to get checked. I thought maybe I needed to let it boot the first time so I reflashed with flash-all, let it boot up the first time, then flashed TWRP with the same results.
Not really looking for technical support, I'm sure the update broke TWRP just making a thread for awareness/discussion.
I submitted a bug report to TWRP's GitHub. It can be found here.
I flashed all the *.img manually and then flashed the newest twrp and it booted up fine...
I just flashed bootloader, radio, boot, system, vendor with fastboot then booted right into TWRP and flashed supersu not issues.
That is so strange, I guess I'll give it another go in a bit.
from bullhead-mtc19z ,the bootloader is updating to bhz10p ,not bhz10m again .
i think it will make some problems.
Yesterday I decided to root my Nexus 7 2013 Wifi running stock 6.0.1 (build MOB30X). I first unlocked the bootloader, then immediately after that I flashed TWRP (twrp-3.0.2-0-flo.img). When I booted up, it would got stuck on a loop with TWRP running OpenRecoveryScript, saying something about unable to mount /data and renaming something, then reboot into TWRP again.
I did some research and it seemed I had to use a multirom TWRP version instead, so I went ahead and flashed it. Now I can go into TWRP, but when booting up I got stuck in the booting animation (the four spinning circles)
How can I fix this?
chinhodado said:
Yesterday I decided to root my Nexus 7 2013 Wifi running stock 6.0.1 (build MOB30X). I first unlocked the bootloader, then immediately after that I flashed TWRP (twrp-3.0.2-0-flo.img). When I booted up, it would got stuck on a loop with TWRP running OpenRecoveryScript, saying something about unable to mount /data and renaming something, then reboot into TWRP again.
I did some research and it seemed I had to use a multirom TWRP version instead, so I went ahead and flashed it. Now I can go into TWRP, but when booting up I got stuck in the booting animation (the four spinning circles)
How can I fix this?
Click to expand...
Click to collapse
Just run these two commands:
Code:
fastboot format cache
fastboot format userdata
Don't worry, you have lost all your data already while unlocking it.
The first boot and the booting animation will be initially longer than usual.
Incidentally, no need to use multirom-TWRP anymore because TWRP v3+ has been properly updated.
I actually solved this myself before k23m's reply by flashing the stock rom (MOB30X), then completed the initial setup, then reflashed TWRP (twrp-3.0.2-0-flo.img, not the multirom version). After that I booted up then restarted into recovery but then realized that TWRP had been wiped (only the android with the red triangle showing). So I re-flashed TWRP again and this time rebooted directly into recovery, and renamed the file recovery-from-boot.p into recovery-from-boot.backup. Then I flashed su and all went well.
k23m said:
Just run these two commands:
Code:
fastboot format cache
fastboot format userdata
Don't worry, you have lost all your data already while unlocking it.
The first boot and the booting animation will be initially longer than usual.
Incidentally, no need to use multirom-TWRP anymore because TWRP v3+ has been properly updated.
Click to expand...
Click to collapse
Thank you for the hint!
So I recently updated my op3 to 3.5.2 Community Build of oxygen OS. It was working well with a few changes from the official builds but a little time passed and the 3.5.3 Community Build was released. Of course I wanted to update so I downloaded it and tried to update but when it booted into the recovery it froze on the logo. So I downloaded the update on the computer and flashed twrp to the recovery and booted into the recovery and it froze again. Currently i have no Recovery and no access to adb.
*When trying to flash a recovery it says it was done successfully but freezes when trying to boot into it.
Normal OS booting is unaffected.
When executing the command "fastboot boot recovery.img", to boot into the recovery without flashing it i get "(remote dtb not found)"
When trying to manually update the OS through "fastboot zip Update.zip", I get "(remote: data too large)".
I also tried to do "fastboot erase recovery" before issuing the flash command.
*In trying to fix this i flashed the boot image of 3.5.3 onto the boot partition but nothing happened and now the phone reads as 3.5.3 on 3.5.2 firmware :crying:
I tried to use SkipSoft ToolKit,custom and official twrp, and recoveries such as CWM.
This would probably be better placed into the, ONEPLUS 3 ROMS, KERNELS, RECOVERIES, & OTHER DEVELOPMENT, section but I can not post there yet. If anyone can help me or find a mod that knows about this problem it would be much appreciated.
Found a Solution
http://forum.xda-developers.com/showpost.php?p=68691560&postcount=56