i have a rooted my android with the kingroot app and it worked perfectly. Had a Super User installed from another rootkit and then i decided to install SuperSU during the installation it asked me to remove the old one so i clicked ok and the installation finished, it then asked to to reboot. but when it rebooted the screen was just black but when i pressed the off button the turn off option, reboot options apeared like normal. so i turned my android off and went into recovery mode to restore to default and wipe cache. after all was done tried to restore but the phone wouldnt get pass the start up logo and eventually just turns off. i cant find a rom that i can install on my android, seems like CWM and TRWP all not supported by my android. i need your help. sorry for any mistakes was writing and trying to recollect everything.
model : LSH-V7
Related
Hello,
I have a great problem with my Motorola. I installed battery icon mod without reading for which phone it's made and used it. Now I can't use my phone, because it's stopping at this logo before system. I had Cyanogenmod 7 (last nightly before RC), but when I destroyed it by this application first thing I did was wipe. After it nothing has changed, so I tried again and I flashed it with normal 2.2 Nordic but - as I "predicted" - nothing has changed again, but this time system was stopping at Android logo, not Cyanogenmod logo. I tried to flash again - nothing. The device can be charged (there appears this battery).
What should I do?
zielonek430 said:
Hello,
I have a great problem with my Motorola. I installed battery icon mod without reading for which phone it's made and used it. Now I can't use my phone, because it's stopping at this logo before system. I had Cyanogenmod 7 (last nightly before RC), but when I destroyed it by this application first thing I did was wipe. After it nothing has changed, so I tried again and I flashed it with normal 2.2 Nordic but - as I "predicted" - nothing has changed again, but this time system was stopping at Android logo, not Cyanogenmod logo. I tried to flash again - nothing. The device can be charged (there appears this battery).
What should I do?
Click to expand...
Click to collapse
Go into the stock recovery and wipe data. Then re-flash the sbf.
I did it already, but I forgot, that I can do wipe after flashing the device I thought about it and did it - everything is working. Sorry for useless thread.
Regards.
I wanted to ask at the same time. What if i can't enter stock recovery. My phone's rooted , slightly overclocked , and i can't download any apps , i can't do factory reset , and even when i'm trying to enter it , the android pic would appear with that "danger - triangle". What should be done?
sLvW said:
I wanted to ask at the same time. What if i can't enter stock recovery. My phone's rooted , slightly overclocked , and i can't download any apps , i can't do factory reset , and even when i'm trying to enter it , the android pic would appear with that "danger - triangle". What should be done?
Click to expand...
Click to collapse
The triangle IS the stock recovery! when you see the triangle with the little android dude, hit both up and down volume at the same time. This will bring up a menu that will allow you to do a factory wipe.
And another question. I've installed custom recovery , and it said that install was succsesful , but when I apply recovery boot , it just reboots my phone , or lefts screen blacked out, at which case i have to turn on my phone by removing and applying battery.
sLvW said:
And another question. I've installed custom recovery , and it said that install was succsesful , but when I apply recovery boot , it just reboots my phone , or lefts screen blacked out, at which case i have to turn on my phone by removing and applying battery.
Click to expand...
Click to collapse
Not sure I understand the questions, but I'll take a stab at it anyway:
Since we have a locked bl, the custom recovery does not overwrite the stock recovery.
As far as I know, the only way to get in to custom recovery, is to push the vol down when the blue light goes on during the boot cycle.
sLvW said:
And another question. I've installed custom recovery , and it said that install was succsesful , but when I apply recovery boot , it just reboots my phone , or lefts screen blacked out, at which case i have to turn on my phone by removing and applying battery.
Click to expand...
Click to collapse
If it was a first reboot after installing Custom Recovery than USB Debbug should be off...
I FOLLOWED ALL TUTORIALS BUT I AM STILL STUCK, PLEASE I NEED SOME HELP
So here is the story:
I had Jedi Mind Trick X, but i wanted to upgrade to CM10, and they said that the best was to get CWM Recovery 6, so i open up the ROM Manager app, and clicked on Flash CWM, everything was working fine untill the app asked for root rights, i granted it and then the app frozze. So i tried it again, and same results. So i figured out i had to see if it has updated (the cwm recovery), so i enter recovery mode, and then i can see there that it was updated (this i think, was the bad choice).
And so i start the process of flashing CM10 following the instructions, i already had a nandroid backup so i skipped that step and go right into the wipe data / factory reset. When i was on that screen the app froze, after waiting for a while that it was still froze, i shut down my device and started up again. Of course the phone didnt boot.
So at this point i had a phone that didnt boot, and a recovery that wasnt full installed (so it didnt work either). So i thinked ODIN might be the solution.
i flashed trought odin CWM 5 again and Telus stock ROM.
BUT now, the phone wont enter download mode (shuts downs), and it wont boot either. Althought, the phone DID boot once so i was happy, but it didnt work, the phone shut down by himself.
So now i cant enter recovery mode, download mode, neither boot. every time it enters a mode, it shuts down. so i need gelp
Im thinking of attaching a video of my situation.
Im sory for my english, im from Argentina.
Thanks in advance.
im starting to think tha might be a hardware problem of the power button
So earlier I changed the look of my SuperSU logo and then later on when I went to click on the old logo it said "SuperSU is not installed" or something to that degree so I went ahead and long pressed it and hit "remove" after I made sure the new logo was on my screen. Then I went ahead and restarted my phone and now whenever I try to turn my phone on it keeps restarting and gets stuck on the Sprint Spark screen. What is there to do now? Thank you so much in advance. Another thing I found was odd was before I restarted the phone, I ran Root Checker and it said I did NOT have root access (but I am rooted), I tried wiping the cache and rebooting but same thing, should I try the factory reset?
yo0123yoyo said:
So earlier I changed the look of my SuperSU logo and then later on when I went to click on the old logo it said "SuperSU is not installed" or something to that degree so I went ahead and long pressed it and hit "remove" after I made sure the new logo was on my screen. Then I went ahead and restarted my phone and now whenever I try to turn my phone on it keeps restarting and gets stuck on the Sprint Spark screen. What is there to do now? Thank you so much in advance. Another thing I found was odd was before I restarted the phone, I ran Root Checker and it said I did NOT have root access (but I am rooted), I tried wiping the cache and rebooting but same thing, should I try the factory reset?
Click to expand...
Click to collapse
It seems you may have lost root somehow when you uninstalled the app . install stock firmware put phone in download mode odin stock firmware . try again you will have to root again
PROBLEM SOLVED.
So at first I used Kingroot to rood my device, and it failed, but then i just realized few days later that Kingroot was installed and used root checker to check and said that it does have root access. After that decided to change the Kingroot to SuperSU by following this video https://www.youtube.com/watch?v=WevWdErXWy4 (It's the SuperSU Me app). I then updated SuperSU binaries and restarted the phone, and now its stuck at the loading screen. I tried hard resetting my phone but it would only show the screen with the android logo and shapes in its belly for about 2 second and go back to the stuck logo screen. Now I'm wondering if there's any fix for it, and if there's no fix then I'm going to try resetting it through this http://lgg3root.com/lg-g3-root/how-to-unrootunbrick-lg-g3/ guide and I was wondering if I should download and use the bell stock factory firmware (I have a virgin mobile version).
Edit: fixed to be more clear.
I Nid 2P said:
So at first I used Kingroot to rood my device, and it failed, but then i just realized few days later that Kingroot was installed and used root checker to check and said that it does have root access. After that decided to change the Kingroot to SuperSU by following this video https://www.youtube.com/watch?v=WevWdErXWy4 (It's the SuperSU Me app). I then updated SuperSU binaries and restarted the phone, and now its stuck at the loading screen. I tried hard resetting my phone but it would only show the screen with the android logo and shapes in its belly for about 2 second and go back to the stuck logo screen. Now I'm wondering if there's any fix for it, and if there's no fix then I'm going to try resetting it through this http://lgg3root.com/lg-g3-root/how-to-unrootunbrick-lg-g3/ guide and I was wondering if I should download and use the bell stock factory firmware (I have a virgin mobile version).
Edit: fixed to be more clear.
Click to expand...
Click to collapse
if you can get into recovery you can probably do it without unbricking. to you have stock recovery or twrp or what? If you have stock recovery then boot into recovery and just run it and itll hard reset your phone, if you have twrp or something just download the flashable rom of your choice (there are stock modded roms too if you like stock) put it on an sdcard and wipe and install that rom.
if you don't know how to get into recovery then make sure your phone is off (if ur not sure do a battery pull and put it back in). hold volume down and power button until the screen comes on. when it comes on let go of vol down and power and then push vol and power again and hold again until you see the writing)
btw if you do a stock recovery hard wipe then you will lose root.
I also faced this problem...
Sent from my SM-E500H using Tapatalk
Problem solved. I just flashed the stock firmware onto my phone and it fixed the stuck on logo problem.
So, i recently have tried flashing Xposed on the MM 6.0.1 on G920P a.k.a Sprint S6
( ALL_SPT_G920PVPU3CPB6_G920PSPT3CPB6_CL7280193_QB8664149_REV02_user_low_ship.tar )
I have root and recovery, but Xposed doesnt seem to comply with me.
from multiple sources or builds.
And each Xposed file that i've tried so far that i've been flashing over and over again, rinse and repeat.
( Flash Stock through Odin, Go through setup process on the phone, Reboot Back to Download mode to Flash TWRP, Reboot, Back to TWRP to Flash Xposed, Once flashed i Restart it again, back to the s6 screen to becoming a black screen bootloop, thus having me restart the whole flashing process again )
from android file host website. And Default xda unofficialy build on this website.
xposed-v79-sdk23-arm64-by-romracer-20151218
xposed-v80.0-sdk23-arm64-custom-build-by-wanam-20160211 - ABDYASAR 7.8MB
xposed-v80.0-sdk23-arm64-custom-build-by-wanam-20160211 - SANOC 7.8mb
xposed-v80.0-sdk23-arm64-custom-build-by-wanam-20160211 -WANAM 7.8MB
xposed-v80-sdk23-arm64-by-romracer-20160202
It would go from the Galaxy S6 Boot Menu startup to black screen and bootloop back to the original BootMenu or screen.
NO LED cycles nothing, but i can access Download Mode and Recovery But Updating Nor Uninstalling doesn't do anything to the rom, it just keeps boot looping unless i Flash the Stock back into place.
I'd like to have Xposed working i havent found a version for me that would work for this but i would really appreciate if everyone could help out.
IAmTechFreq said:
So, i recently have tried flashing Xposed on the MM 6.0.1 on G920P a.k.a Sprint S6
( ALL_SPT_G920PVPU3CPB6_G920PSPT3CPB6_CL7280193_QB8664149_REV02_user_low_ship.tar )
I have root and recovery, but Xposed doesnt seem to comply with me.
from multiple sources or builds.
And each Xposed file that i've tried so far that i've been flashing over and over again, rinse and repeat.
( Flash Stock through Odin, Go through setup process on the phone, Reboot Back to Download mode to Flash TWRP, Reboot, Back to TWRP to Flash Xposed, Once flashed i Restart it again, back to the s6 screen to becoming a black screen bootloop, thus having me restart the whole flashing process again )
from android file host website. And Default xda unofficialy build on this website.
xposed-v79-sdk23-arm64-by-romracer-20151218
xposed-v80.0-sdk23-arm64-custom-build-by-wanam-20160211 - ABDYASAR 7.8MB
xposed-v80.0-sdk23-arm64-custom-build-by-wanam-20160211 - SANOC 7.8mb
xposed-v80.0-sdk23-arm64-custom-build-by-wanam-20160211 -WANAM 7.8MB
xposed-v80-sdk23-arm64-by-romracer-20160202
It would go from the Galaxy S6 Boot Menu startup to black screen and bootloop back to the original BootMenu or screen.
NO LED cycles nothing, but i can access Download Mode and Recovery But Updating Nor Uninstalling doesn't do anything to the rom, it just keeps boot looping unless i Flash the Stock back into place.
I'd like to have Xposed working i havent found a version for me that would work for this but i would really appreciate if everyone could help out.
Click to expand...
Click to collapse
Did it work. Ive only noticed a tad bit longer boot up the 1st time but all good.
i've tried most of them and i tried v80.0 or v80 and i got one part success half i didnt which was from it i got to the LTE spectrum screen and it just would go past that before it would just be the led flashing and bglank screen, i waited about and hour and still nothin changed from that screen.
Nevermind i made an update
This is what i've managed so far.... what am i missing here?
So here's what i"d take place in order to attempt a flash of Xposed Framework.
I start with Pre- Downloading the files for the MM 6.0.1 Stock Rom, it's in the forums Somewhere.
TWRP ( New_S6_Spr_TWRP_MM_Bootloader2 ) a.k.a 3.0.1
(This is a special version only for the Sprint SM-G920P and is meant to be flashed with Odin)
SuperSU 2.68 a.k.a ( BETA-SuperSU-v2.68-20160228150503 )
and obviously, Odin ( Odin3 v3.10 )
The steps that are taken place.
1st. I'd Boot my device into download/odin mode.
or
( while the device is powered off, i press and hold the home+power+volume down buttons.
and from there I'd be taken to a light blueish screen saying "Warning", and i follow through by pressing volume up)
2nd.
Once the device is in download/odin mode, and ready to go, i'd take my phone, plug it into my windows PC and open Odinv3 and from there
i'd select in odin, or i'd click the "AP" button and select the, tar file.
After that has been flashed thoroughly, I'd then proceed with the follow on screens, the 1st reboot and it updates or it says
Optimizing app 1 to 30.... the 2nd reboot where the hand free activation commences and
from that 3rd time it reboots and boots up again, i'd follow up with my login information.
3rd. once my device has been fully booted from the 2nd part, i'd then shut it down or restart it into "download mode again" and connect it to my pc again
and from there i'd load odin, and search or i'd find where I downloaded the special "TWRP .tar" or recovery file
and select the "Ap" option again and press start Afterwards.
After it flashes, right when its done i automatically hold the home+power+volume up buttons,
turn the device off and hold home+power+volume up and your should get some red text in the upper left hand corner with recovery not enforcing, that's okay dont be worried,
and from there it should boot into and be brought into TWRP...finally lol.
Now that's where you can flash SuperSU
4th. I'd leave my phone connected to my pc until, it's fully booting into twrp or i'd just connect it once im in the recovery.
I let my pc detect my phone and i'd copy both of these files.
SuperSU 2.68
and
Xposed
4th. After its copied, i'd go back into my phone, i tap install, and i select supersu and let it run, afterwards, i press reboot.
And let it sit for about another 2 minutes to do its own thing. Afterwards. once the phone is fully booted up.
I'd then go back into recovery, and flash Xposed and i'd wait about another 2-3 minutes for it to cycle
from the LTE Spectrum Screen to the, torquise colored screen where it's finally optimizing apps from 0 to 331.
5th. Once done, i'd finally have my advantage to install what i'd like which i'm doing as of right now still testing it out.
P.S if you do what i do for the SnapPrefs Module then i'd take in high note that before you flash the Xposed to download latest Snapchat 9.26
log in, once logged in then proceed with the rest and download XInstaller to downgrade from 9.26 to 9.17.1.0 to take full advantage of Snapprefs coolness.
upon note so far, after installing the modules, i rebooted my phone and it boots until it hits the LTE Spectrum screen and it has a light blueish pusling cycle and im stuck here.
maybe i can try another version. to be continued...
If you need any help feel free, i will try as best as i can, as i am a n00b but i have plenty of free time and have some decent knowledge about this.
After , i went back into recovery, i went to uninstall xposed thru the other flash file and its says optimizing 0 to 36 items and it booted so far, mayber after i flash the cache again and reinstall i should be fine but until further notice...tbc
Alright after a good amount of time i;ve finally concluded that the versions i;ve tired from xposed were the ones from the OFFICIAL thread and id always bootloop with that puling blue led and black screen, BUT with Wanams Xposed Version 80, and 79 they worked EXCEPT i can only get to the LTE SPecturm white boot screen and it does nothing from there BUT when i flash 80.1 it completely pulls through with the boot and completes but i had forgotten to mention that for some people on aanother thread that Xinstaller may leave you with bootloops and as it did for me thats exactly what happened. But i m still confused as to why the officials dont work by wanams does even after wiping cache,and dalvik cache multiple times and uninstall and reinstalling xposed.
Does yours still bootloop or did it finally pull through?