Related
So as the title says, after flashing cm14. 1 can't go into recovery anymore, it just a black screen. I tried to use flashify but nothing, a couple of apps show that I have twrp 3.0.2.1 but can't get into it... Help?
Cheers
Same situation here. Neither booting the recovery via fastboot without flashing nor flashing the TWRP an then booting into it result in black screen. Flashify gives no results here. Please help.
EDIT; flashing this one via fastboot restores the access to TWRP, confirming it right now. http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get
JKMB888 said:
Same situation here. Neither booting the recovery via fastboot without flashing nor flashing the TWRP an then booting into it result in black screen. Flashify gives no results here. Please help.
EDIT; flashing this one via fastboot restores the access to TWRP, confirming it right now. http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get
Click to expand...
Click to collapse
Which thread is this from please?
JKMB888 said:
Same situation here. Neither booting the recovery via fastboot without flashing nor flashing the TWRP an then booting into it result in black screen. Flashify gives no results here. Please help.
EDIT; flashing this one via fastboot restores the access to TWRP, confirming it right now. http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get
Click to expand...
Click to collapse
Yeah man im in the same boat, if i get time ill try this twrp recovery. Where did that recovery come from?, it seems like the CM recovery for 14.1 nightly high jacks the recovery partition (i call it that,i dont know the term for it)
Sent from my ONEPLUS A3000 using Tapatalk
I believe the official 14.1 nightlies are based on the CB which requires the modified TWRP, which is what @JKMB888 has linked you to.
Hw4ng3r said:
I believe the official 14.1 nightlies are based on the CB which requires the modified TWRP, which is what @JKMB888 has linked you to.
Click to expand...
Click to collapse
I would like to truly confirm that the direct link to recovery, along with the thread in which it can be found, repair the situation. I was able to restore the backup of Freedom OS and the return to CM14.1 backup. We should keep this one somewhere near, jsut in case.
Thanks a lot guys, that did the trick, and done with flashify
JKMB888 said:
I would like to truly confirm that the direct link to recovery, along with the thread in which it can be found, repair the situation. I was able to restore the backup of Freedom OS and the return to CM14.1 backup. We should keep this one somewhere near, jsut in case.
Click to expand...
Click to collapse
@JKMB888 it does work 100% is as simple as flashing the TWRP. Actually, i installed it with CM 14.1 running just fine
Sent from my ONEPLUS A3000 using Tapatalk
Just re flash the TWRP image via Fastboot. Apps like flashify actually use TWRP or whatever recovery installed to flash image file AFAIK. I recommend using modified TWRP,Flashing some roms break the access. But the modified one can withstand almost every new rom installs.
Hope it helps.
Why i have always mount decrypt data when i boot in recovery mode which is TWRP 3.0.2-22 aand ask me to input a password?
Edit: I found the solution, i had a pattern lock screen and i removed it!
HC4Life said:
Why i have always mount decrypt data when i boot in recovery mode which is TWRP 3.0.2-22 aand ask me to input a password?
Click to expand...
Click to collapse
At some point your phone data became encrypted. While booted up if you search for encrypt in settings you'll see your phone is encrypted.
Same thing happened to me yesterday after flashing 3.2.7 and booting up for the first time before going back to TWRP to flash AICP. Only way to decrypt permanently, as far as I know, is to wipe all data including internal and completely start from scratch.
GrandMasterB said:
At some point your phone data became encrypted. While booted up if you search for encrypt in settings you'll see your phone is encrypted.
Same thing happened to me yesterday after flashing 3.2.7 and booting up for the first time before going back to TWRP to flash AICP. Only way to decrypt permanently, as far as I know, is to wipe all data including internal and completely start from scratch.
Click to expand...
Click to collapse
Look at my edited reply...
m4manusraj said:
Just re flash the TWRP image via Fastboot. Apps like flashify actually use TWRP or whatever recovery installed to flash image file AFAIK. I recommend using modified TWRP,Flashing some roms break the access. But the modified one can withstand almost every new rom installs.
Hope it helps.
Click to expand...
Click to collapse
actually flashify did the trick for me as I had no access to a pc for the time
http://forum.xda-developers.com/one...nity-build-t3461648/post68691560#post68691560
Flash this recovery. Fixed the problem for me
JKMB888 said:
I would like to truly confirm that the direct link to recovery, along with the thread in which it can be found, repair the situation. I was able to restore the backup of Freedom OS and the return to CM14.1 backup. We should keep this one somewhere near, jsut in case.
Click to expand...
Click to collapse
i am facing just the same situation with cm14.1 nightly and can't boot into recovery
i tried flashing the recovery image provided by you i.e. twrp-3.0.2-22-oneplus3.img but i face the same problem again
when i go into the recovery all i see is a black screen with a white notification light on and it remains there untill i switch off my phone manually using the power button
i tried facing the problem when i installed the cm14.1 nightly
i was unable to login snapchat as i device was rooted as said by the message on snapchat
so i decided to unroot my device via supersu FULL UNROOT option
after a reboot i successfully logged into snapchat
then i tried to root it again
i went into recovery to flash the supersu zip
and since then i have been unable to see the twrp recovey
please help me
This thread is a life save. Tried everything and it drove me nuts not getting into recovery.
THANK YOU!
gangangan2 said:
http://forum.xda-developers.com/one...nity-build-t3461648/post68691560#post68691560
Flash this recovery. Fixed the problem for me
Click to expand...
Click to collapse
Thank you so much it's work for me now..
After I got the recovery back, I flashed CM13 again and ARM64 6.0 Nano Gapps for my Oneplus 3, but I'm getting an error after the "preparing apps' screen is loaded saying that - unfortunately the process android.process.media has stopped one plus 3 boot and then the phone switches off.
Any solution to this? I've already tried flashing different versions of CM13.
Thank you!! I was looking for hours.
This link fixed the problem!
JKMB888 said:
Same situation here. Neither booting the recovery via fastboot without flashing nor flashing the TWRP an then booting into it result in black screen. Flashify gives no results here. Please help.
EDIT; flashing this one via fastboot restores the access to TWRP, confirming it right now. http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get
Click to expand...
Click to collapse
Hey, guys. I'm pretty sure I bricked my phone and there's no way to get out.
So I was on CM13 official builds on my OP3. Then, on the OTA update system they have, I got moved onto the CM14.1. I downloaded from here and went into my twrp recovery to flash. I made a clean flash and then proceeded to go back to system. I thought everything was ok until I realised I hadn't flashed a gapps package which I pretty much need to survive as all my contacts backups etc. are on there. I powered off my phone and went to go back into the recovery after downloading gapps 7.1 micro. It went past the *You're device can not be trusted'* and then went to the oneplus screen. After that, it stayed like that for about 30 secs and powered off. At first, I thought I messed something up and tried again. I repeated that for about 3 times and it didn't work. I tried going into the normal system and coming back to recovery and it didn't work still. In fact, now I can't even get into system. Now, i can only boot up to fastboot, where my computer still doesn't realise my phone is plugged in.
Anyone got any ideas on how to fix this? I wouldn't say I'm a noob at this because I have flashed many times before but I'm relatively new to the scene. I didn't see this thread before i ripped my hair out and i think wrecked my phone @JKMB888
EDIT: I sorted it out with help from Naman Bhalla's unbrick thread and this. A certain combo works and now I'm on CM14.1 enjoying life
Hello guys,
As stated in the title, I can not boot into recovery since I flashed CM 14.1. I already tried reflashing TWRP, booting TWRP via fastboot, using another, more recent TWRP image.
This is rather urgent, since, although I can boot CM 14.1 without any problem, I forgot to do a Titanium Backup of two apps, so I have to restore a nandroid backup to get those back, which is kind of hard, without access to TWRP. Using TWRP Explorer is out of question, since that, as far as I know, does not work with encrypted backups.
Flashing via Flashify does not work either.
I just tried with the most recent CM Recovery, that does work, but that does not really help, since that won't restore TWRP Backups..
Greetings
jcgruenhage
delete
Just flash twrp again!?
Flash the twrp in the following link https://www.androidfilehost.com/? using flashify from play store .This helped me
daleski75 said:
Just flash twrp again!?
Click to expand...
Click to collapse
That did not work, at least not with the official TWRP. Flashing this TWRP gave me TWRP back, but now restoring the Backup somehow did not work as expected, the old CM 14.1 unofficial build that is in that backup won't boot.
I'll try only restoring the data part onto the official build, is there anything else you can recommend? Another firmware? Something?
Oh and by the way, thank you, for helping here and for you CM 14.1 builds, somehow I couldn't build CM 14.1 and 14, so having your builds was really helpful.
What version of OOS was you on prior to flashing CM14.1?
daleski75 said:
What version of OOS was you on prior to flashing CM14.1?
Click to expand...
Click to collapse
Directly upon receiving my OP3 I flashed CM13, that was in August, so 3.2.4 I guess, and I flashed the firmware of 3.2.6 before flashing Takers and your CM14 and later 14.1 builds.
TWRP behaves funny, the progress of restoring Data is already at 138%, 6800MB of 4899MB, the calculation is not taking compression into account I guess?
LOOOL, I have booted into the official CM14.1 with the old data, no fc or anything, but my pattern does not work anymore. same pattern as before, won't be accepted.
Never seen that issue before what happens if you reboot into the bootloader and then connect the phone to your pc and type fastboot boot <name of recovery> does it boot up?
Of course replace the < > with the name of the img file.
daleski75 said:
Never seen that issue before what happens if you reboot into the bootloader and then connect the phone to your pc and type fastboot boot <name of recovery> does it boot up?
Of course replace the < > with the name of the img file.
Click to expand...
Click to collapse
Yes, TWRP works now, but the backed up unofficial CM 14.1 does not boot.
But, only this TWRP works, booting the official TWRP does not work.
I could probably just use the TWRP file manager to extract the few files from the data partition that I need, but this is a workaround and not a fix, and that is not desired in most cases. Fixing it is hard without someone that still has a broken system.
jcgruenhage said:
Yes, TWRP works now, but the backed up unofficial CM 14.1 does not boot.
But, only this TWRP works, booting the official TWRP does not work.
I could probably just use the TWRP file manager to extract the few files from the data partition that I need, but this is a workaround and not a fix, and that is not desired in most cases. Fixing it is hard without someone that still has a broken system.
Click to expand...
Click to collapse
Yup thats the one I am using as well.
daleski75 said:
Yup thats the one I am using as well.
Click to expand...
Click to collapse
Do you know how one would debug something like that? I have nothing but the splash screen in the beginning and then a black screen
I will just flash CM 14.1 and manually extract my OTP tokens from the data backup, so I don't really need to debug that, but it would probably help determine the cause and properly fix it for the future.
Ask for the link
daleski75 said:
Yup thats the one I am using as well.
Click to expand...
Click to collapse
May I ask which one? the link is dead ...
I am having the same problem, i can't boot into recovery and cant find a way to flash it.
Can someone explain me how to?
ChrisDiM said:
I am having the same problem, i can't boot into recovery and cant find a way to flash it.
Can someone explain me how to?
Click to expand...
Click to collapse
Sorry to hear that. You have to use Qualcomm Drivers to reset your cellphone
Same issue here. Whenever I try to boot into recovery it just goes straight back to the bootloader/fastboot.
**** me, what do I do?
I try "fastboot format userdata" but after i have the same problem with TWRP-3.0.2-1.28
jackalsin said:
Sorry to hear that. You have to use Qualcomm Drivers to reset your cellphone
Click to expand...
Click to collapse
I just found a guide to reset my phone using Qualcomm but my phone doesn't show up on device manager + since this morning my op3 doesn't start up anymore and doesn't react when i plug the charger in.
ChrisDiM said:
I just found a guide to reset my phone using Qualcomm but my phone doesn't show up on device manager + since this morning my op3 doesn't start up anymore and doesn't react when i plug the charger in.
Click to expand...
Click to collapse
Hold power button for at least a minute. It's what I did and fixed it.
DevSquad said:
Hold power button for at least a minute. It's what I did and fixed it.
Click to expand...
Click to collapse
after doing this it showed the OP logo for a few seconds and shut off again :/
Its really a bad moment for me because i had to call a lot a people today and now i can't even start up my phone
ChrisDiM said:
after doing this it showed the OP logo for a few seconds and shut off again :/
Its really a bad moment for me because i had to call a lot a people today and now i can't even start up my phone
Click to expand...
Click to collapse
Can you get into fastboot?
If so, you can sideload a working TWRP via there.
***SOLVED***
Hello, I had cm14 installed and I was trying to update it. after the update, the device always boots to recovery(TWRP).
I tried the full wipe and flash again the rom, again boot to recovery. what is the solution for it?
lsdream said:
Hello, I had cm14 installed and I was trying to update it. after the update, the device always boots to recovery(TWRP).
I tried the full wipe and flash again the rom, again boot to recovery. what is the solution for it?
Click to expand...
Click to collapse
what version of twrp are you running? do you have a nandroid backup that you could restore? sometimes the partitions can get messed up during an update. if nothing helps, just follow this unbrick guide which will revert your phone completely back to stock, with all the storage partitions intact.
3.0.2-1
lsdream said:
3.0.2-1
Click to expand...
Click to collapse
yeah, everyone's got that one, but there are many versions of it usually a number, like 3.0.2-1 (22) for example, and each one build for specific cases. except you got it from the official twrp web, then there shouldn't really be problems with cm14.1
what about nandroid? can you restore one?
do you have any idea how to boot it?
lsdream said:
do you have any idea how to boot it?
Click to expand...
Click to collapse
please use the quote function so i get a notification when you reply.
i do, right in my first post here is a link to an unbrick guide which will help you because clearly something in your phone's storage is messed up. just follow it and you'll be back at stock with a fully functional phone
bombaglad said:
please use the quote function so i get a notification when you reply.
i do, right in my first post here is a link to an unbrick guide which will help you because clearly something in your phone's storage is messed up. just follow it and you'll be back at stock with a fully functional phone
Click to expand...
Click to collapse
Thanks, I just flash the stock rom and it boot normally.
lsdream said:
Hello, I had cm14 installed and I was trying to update it. after the update, the device always boots to recovery(TWRP).
I tried the full wipe and flash again the rom, again boot to recovery. what is the solution for it?
Click to expand...
Click to collapse
I had the same situation. You get out of this by fastboot flashing cm recovery, booting to it, then flash twrp back in fastboot. I think the ota doesnt fully work with twrp.
Flash the modified twrp from the second post in this forum
http://forum.xda-developers.com/oneplus-3/how-to/rom-community-build-3-5-5-t3490939
Hi guys, I searched around the forum before posting this so I apologize but I recently installed a new rom and possibly a wrong kernel with it. Afterwards, if I try to turn it on, it just shows the logo and then turns right off. I can't even go into recovery since it does the same. The only thing I can do is boot it into fastboot but I'm not sure where to go from here. I tried using a guide with no success.
Any words of wisdom?
reflash your recovery via fastboot, then boot into recovery and do a clean install
fastboot flash [recovery].img
I tried reflashing recovery but all it does is show the old rom logo that was used and then shuts down.
Hi,
Read carefully and try this guide:
forum.xda-developers.com/oneplus-3/how-to/guide-mega-unbrick-guide-hard-bricked-t3405700
which rom did you flash? You need the correct twrp file for your bootloader.
That's the first place I tried. Anytime I hook-up my phone to the PC it shows up as OnePlus Android bootloader interface under Android phone and I can't seem to update the drivers..
matze19999 said:
which rom did you flash? You need the correct twrp file for your bootloader.
Click to expand...
Click to collapse
I used the Freedom Rom 2.0
Arken2121 said:
I used the Freedom Rom 2.0
Click to expand...
Click to collapse
you need this twrp file:
https://forum.xda-developers.com/devdb/project/dl/?id=21835
matze19999 said:
you need this twrp file:
https://forum.xda-developers.com/devdb/project/dl/?id=21835
Click to expand...
Click to collapse
Thank you so much, I guess I installed the wrong TWRP and I can FINALLY get into recovery. Thank you so much.
Hi all,
*I've unlocked bootloader
* Have tried fastboot boot TWRP.img, as well as tried flashing TWRP RC1 via the Skipsoft toolkit.
Every way I've tried the phone just sits at the TWRP boot screen and doesn't allow me to go any further..
Any help here would be truly appreciated!
Cheers,
I've been having the same issue tonight. Re-flash the stock image, go through the whole setup process and make sure you add a lockscreen pin, then flash TWRP. That is what worked for me. I still can't flash a Rom though for some reason. It's driving me insane.
dutchy716 said:
I've been having the same issue tonight. Re-flash the stock image, go through the whole setup process and make sure you add a lockscreen pin, then flash TWRP. That is what worked for me. I still can't flash a Rom though for some reason. It's driving me insane.
Click to expand...
Click to collapse
You're braver than me. I haven't had my Pixel XL long but this is the first phone I've ever owned where I am afraid to try and install a custom recovery and ROM. With the dual partitions and what I hear about TWRP still being buggy it just seems like Google didn't want people to run anything but pure Android on the Pixels.
dutchy716 said:
I've been having the same issue tonight. Re-flash the stock image, go through the whole setup process and make sure you add a lockscreen pin, then flash TWRP. That is what worked for me. I still can't flash a Rom though for some reason. It's driving me insane.
Click to expand...
Click to collapse
Same issue here, but no solution. Adding a lockscreen pin didn't change anything for me. I just get a teamwin image but it just sits there & doesn't actually open TWRP. My bootlocker is unlocked but thats as far as I can get 7.1.2 with May security. I have tried reloading everything and followed commonly recommended steps.
Any suggestions greatly appreciated. I would love to get this thing rooted and get some ROM flexibility - even to just get rid of the Nav Bar ....
mikefnz said:
Same issue here, but no solution. Adding a lockscreen pin didn't change anything for me. I just get a teamwin image but it just sits there & doesn't actually open TWRP. My bootlocker is unlocked but thats as far as I can get 7.1.2 with May security. I have tried reloading everything and followed commonly recommended steps.
Any suggestions greatly appreciated. I would love to get this thing rooted and get some ROM flexibility - even to just get rid of the Nav Bar ....
Click to expand...
Click to collapse
I have never had a problem. Make sure your using the rc1 fast boot TWRP. Should be fastboot boot twrp.img. I change file name to this or copy and paste. Then you install rc1 or rc2 zip.
I know you will have problems if you try to install the wrong file.
mac796 said:
I have never had a problem. Make sure your using the rc1 fast boot TWRP. Should be fastboot boot twrp.img. I change file name to this or copy and paste. Then you install rc1 or rc2 zip.
I know you will have problems if you try to install the wrong file.
Click to expand...
Click to collapse
I am doing exactly as you mentioned.. flash rc1.img, however the phone does not go beyond the boot screen, it just sits there.... Can I ask what steps you are taking prior to flashing twrp? Thanks!
mazubo said:
I am doing exactly as you mentioned.. flash rc1.img, however the phone does not go beyond the boot screen, it just sits there.... Can I ask what steps you are taking prior to flashing twrp? Thanks!
Click to expand...
Click to collapse
Hmm are you on may bootloader because i think modifying the boot partition causes bootloop without the boot signature?
XtraArrow said:
Hmm are you on may bootloader because i think modifying the boot partition causes bootloop without the boot signature?
Click to expand...
Click to collapse
Yes I am.. should I downgrade to 7.1.1? Tjere was no mention of that issue in the skipsoft toolkit thread... Weird!
mazubo said:
Yes I am.. should I downgrade to 7.1.1? Tjere was no mention of that issue in the skipsoft toolkit thread... Weird!
Click to expand...
Click to collapse
Sure, i guess.. or you could just manually flash the April bootloader. a lot easier.
XtraArrow said:
Sure, i guess.. or you could just manually flash the April bootloader. a lot easier.
Click to expand...
Click to collapse
Ok, would flashing just the bootloader wipe the phone? Also how would I find just the bootloader? Thanks for the suggestion, I haven't flashed just a bootloader before..
mazubo said:
I am doing exactly as you mentioned.. flash rc1.img, however the phone does not go beyond the boot screen, it just sits there.... Can I ask what steps you are taking prior to flashing twrp? Thanks!
Click to expand...
Click to collapse
That strange. I just flash a factory image from Google
Set up a security pattern
Enable adb debugging
Fastboot boot twrp 3.0.2-0 rc1 IMG
Make sure it asks for your security pattern if it doesn't reboot to bootloader and fastboot twrp again, and keep repeating until it does
Install twrp 3.1.0.0 rc2 or rc1 zip
If your using may bootloader's fish VBS 6 zip
And it should stick, if you flash. Anything else that messes with boot flash that VBS zip at the end again
mazubo said:
Ok, would flashing just the bootloader wipe the phone? Also how would I find just the bootloader? Thanks for the suggestion, I haven't flashed just a bootloader before..
Click to expand...
Click to collapse
If you download the offiial april firmware, you can manually extract it from the .zip then you would do this command in fastboot :--------- fastboot flash bootloader PUTFILEHERE.img
EDIT: Are you able to get into TWRP by any chance??
mac796 said:
That strange. I just flash a factory image from Google
Set up a security pattern
Enable adb debugging
Fastboot boot twrp 3.0.2-0 rc1 IMG
Make sure it asks for your security pattern if it doesn't reboot to bootloader and fastboot twrp again, and keep repeating until it does
Install twrp 3.1.0.0 rc2 or rc1
If your using may bootloader's fish VBS 6 zip
And it should stick, if you flash. Anything else that messes with boot flash that VBS zip at the end again
Click to expand...
Click to collapse
Hmm, maybe this is where I've gone wrong.. I thought the need to create a security pin/pattern was only if coming from a previously rooted state, or from a custom ROM. I will try this as well and report back.. thanks!
XtraArrow said:
If you download the offiial april firmware, you can manually extract it from the .zip then you would do this command in fastboot :--------- fastboot flash bootloader PUTFILEHERE.img
EDIT: Are you able to get into TWRP by any chance??
Click to expand...
Click to collapse
Unable to get into twrp as previously mentioned. I flash the IMG file, then it just hangs on the TWRP boot screen..
mazubo said:
Unable to get into twrp as previously mentioned. I flash the IMG file, then it just hangs on the TWRP boot screen..
Click to expand...
Click to collapse
Alright, try doing what I mentioned. Download April firmware, extract the bootloader.img from it and flash using command above.
XtraArrow said:
Alright, try doing what I mentioned. Download April firmware, extract the bootloader.img from it and flash using command above.
Click to expand...
Click to collapse
This seems likely to work. Thanks for the suggestions, and I'll report back! Cheers!
mazubo said:
This seems likely to work. Thanks for the suggestions, and I'll report back! Cheers!
Click to expand...
Click to collapse
I'm no expert but it's seems like a decent suggestion. Let us know how it goes.
@mazubo
You keep stating that you just flash the image. Are you flashing it from the bootloader then trying to boot to recovery?
You have to boot TWRP from your PC first. Then from TWRP you can then "flash" TWRP.
Just wanted to make sure that was a step you were taking!
Just wait. It will take little longer
Sent from my Pixel XL using Tapatalk
freddy0872 said:
@mazubo
You keep stating that you just flash the image. Are you flashing it from the bootloader then trying to boot to recovery?
You have to boot TWRP from your PC first. Then from TWRP you can then "flash" TWRP.
Just wanted to make sure that was a step you were taking!
Click to expand...
Click to collapse
Yes, I have tried fastboot to flash the TWRP img, as well as skipsofts toolkit. I guess I've been using the term "flash" for fastboot, as I haven't been able to use twrp yet.. I understand that you need to flash the TWRP img via pc and then flash the TWRP zip, then SuperSU or magisk, whatever your poison may be !