For those who are familiar with the process of getting the CM13 (http://forum.xda-developers.com/htc-10/development/alpha-cyanogenmod-13-0-unofficial-t3465667) booting on verizon/sprint I ran into some trouble. So in trying to install I first superCID to 22222222 which worked fine, I then flashed the file that @holofractal provided from my external_SD (thank you for providing) in download mode, phone then rebooted and went through everything and turned my phone off. Upon manually going into recovery from my phone being off MY SD CARD WAS WIPED! I have 0 clue what went on, my backup on my external SD did not work either so I attempted to install CM after this all went down (did not work). So I usb-otg-ed leedroid and that booted up fine. Anybody know what is up?
Verizon HTC 10
S-off and unlocked
Are you sure you data was actually wiped? I went through something similar on my Verizon 10, installed the U.S Unlocked firmware from the same thread as you, and when I rebooted I had no ROM and couldn't see my internal SD card in TWRP anymore . Restoring old fw didn't work either. Flashing the no-wipe RUU from dottat's thread did work though, and I was able to re-access all my data without any loss.
For what it's worth, it was mentioned in the CM thread that after changing CID and flashing a new fw, you have to format your SD card anyway for a ROM to work.
4rsenal said:
For those who are familiar with the process of getting the CM13 (http://forum.xda-developers.com/htc-10/development/alpha-cyanogenmod-13-0-unofficial-t3465667) booting on verizon/sprint I ran into some trouble. So in trying to install I first superCID to 22222222 which worked fine, I then flashed the file that @holofractal provided from my external_SD (thank you for providing) in download mode, phone then rebooted and went through everything and turned my phone off. Upon manually going into recovery from my phone being off MY SD CARD WAS WIPED! I have 0 clue what went on, my backup on my external SD did not work either so I attempted to install CM after this all went down (did not work). So I usb-otg-ed leedroid and that booted up fine. Anybody know what is up?
Verizon HTC 10
S-off and unlocked
Click to expand...
Click to collapse
I forgot to mention that your internal sd would be wiped. Also, k thought a backup would work, but apparently not, I too learned that the hard way.
Just set up everything again. I know it's a pain. Use titanium backup for apps next time. That's what I do.
holofractal said:
I forgot to mention that your internal sd would be wiped. Also, k thought a backup would work, but apparently not, I too learned that the hard way.
Just set up everything again. I know it's a pain. Use titanium backup for apps next time. That's what I do.
Click to expand...
Click to collapse
So am I good to go now with everything? Still unsure why CM13 failed to flash. Maybe because the file was on a USB OTG?
4rsenal said:
So am I good to go now with everything? Still unsure why CM13 failed to flash. Maybe because the file was on a USB OTG?
Click to expand...
Click to collapse
Yes, I don't think it'll work off that. Are you using multirom?
It shouldn't fail. Try flashing it from the external sd card.
holofractal said:
I forgot to mention that your internal sd would be wiped. Also, k thought a backup would work, but apparently not, I too learned that the hard way.
Just set up everything again. I know it's a pain. Use titanium backup for apps next time. That's what I do.
Click to expand...
Click to collapse
holofractal said:
Yes, I don't think it'll work off that. Are you using multirom?
It shouldn't fail. Try flashing it from the external sd card.
Click to expand...
Click to collapse
No multirom but will try and report back.
4rsenal said:
No multirom but will try and report back.
Click to expand...
Click to collapse
What happened when you installed cm 13 exactly? Did the cm guy come up for a min and the screen go black
Tarima said:
Are you sure you data was actually wiped? I went through something similar on my Verizon 10, installed the U.S Unlocked firmware from the same thread as you, and when I rebooted I had no ROM and couldn't see my internal SD card in TWRP anymore . Restoring old fw didn't work either. Flashing the no-wipe RUU from dottat's thread did work though, and I was able to re-access all my data without any loss.
For what it's worth, it was mentioned in the CM thread that after changing CID and flashing a new fw, you have to format your SD card anyway for a ROM to work.
Click to expand...
Click to collapse
Okay, so if my SD card was wiped than it is formatted? (wipe = format, right?). Also what is dottat's no-wipe RUU? I am going to try to install CM now so will you guys know if it works.
4rsenal said:
Okay, so if my SD card was wiped than it is formatted? (wipe = format, right?). Also what is dottat's no-wipe RUU? I am going to try to install CM now so will you guys know if it works.
Click to expand...
Click to collapse
Here's what I would do. If you have already done any of the steps I list just skip them.
1. Back up important data if you wish.
2. Install firmware package. I am a sprint user, I used 1.95.403.1 international firmware. I removed the radio.img and edited the android-info.txt file to match my MID.
3. In TWRP, go to wipe, and format data, type yes and click enter.
4. Check your log by clicking the hamburger menu button in the bottom right corner. If you see red text like Mounting error for preload and cache, wipe them either with fastboot (I haven't done that) or, what I did was install LeeDroid, which wiped those partitions.
5. Install the ROM of your choice. (I've noted that I still had to use a Sprint specific kernel for my device, which makes me theorize that the firmware update zip might not change all partitions, which you'd need an RUU for to flash everything, I haven't tested that as my device works fine.)
6. Boot CM. Sometimes the screen will go dark, be patient with it, should boot in 5 minutes or less.
Try these and if they don't work, lemme know. I got nothing going on.
holofractal said:
Here's what I would do. If you have already done any of the steps I list just skip them.
1. Back up important data if you wish.
2. Install firmware package. I am a sprint user, I used 1.95.403.1 international firmware. I removed the radio.img and edited the android-info.txt file to match my MID.
3. In TWRP, go to wipe, and format data, type yes and click enter.
4. Check your log by clicking the hamburger menu button in the bottom right corner. If you see red text like Mounting error for preload and cache, wipe them either with fastboot (I haven't done that) or, what I did was install LeeDroid, which wiped those partitions.
5. Install the ROM of your choice. (I've noted that I still had to use a Sprint specific kernel for my device, which makes me theorize that the firmware update zip might not change all partitions, which you'd need an RUU for to flash everything, I haven't tested that as my device works fine.)
6. Boot CM. Sometimes the screen will go dark, be patient with it, should boot in 5 minutes or less.
Try these and if they don't work, lemme know. I got nothing going on.
Click to expand...
Click to collapse
Everything is good, except the data icon in status bar shows that I do not have data... Any ideas on that?
4rsenal said:
Everything is good, except the data icon in status bar shows that I do not have data... Any ideas on that?
Click to expand...
Click to collapse
Go to settings, Cellular settings, network operator, let it load, and select the Verizon option. Go home, then open the settings app again (without closing the other one), and select the CDMA+LTE/EvDo option. Check your APN.
Related
I was wondering if there is a very simple and easy way to completely wipe/clear the phone back to orignal status like when it was bought? It is rooted (unrevoked3) and have been flashing different roms, kernels, themes. The reason I want to do this is because i want to clear things off my sdcard that werent there when it was new and just start over with a clean phone. any help or suggestions
Well you can clear the sdcard easily by formatting it, erasing all the data. On the phone, boot into recovery and perform a factory reset, can be done in recovery, and you'll still be rooted. If you are hellbent on unrooting, run the unrevoked s-on tool, then running the 3.70 ruu.
1buell1125r said:
I was wondering if there is a very simple and easy way to completely wipe/clear the phone back to orignal status like when it was bought?
Click to expand...
Click to collapse
Yes. Go to Menu-Settings-SD card & Phone Storage and then, at the bottom, select "Factory data reset". It states underneath that it "erases all data on phone", however, it does not delete apps, therefore it is best to wipe from within recovery.
It is rooted (unrevoked3) and have been flashing different roms, kernels, themes.
Click to expand...
Click to collapse
You are not alone, my friend...
The reason I want to do this is because i want to clear things off my sdcard that werent there when it was new and just start over with a clean phone. any help or suggestions
Click to expand...
Click to collapse
You don't have to wipe the phone in order to clear the contents of your SD card. From within the same menu, select "Unmount SD card" and then underneath it, select "Format SD card". That will erase everything on the card. Please be sure to copy the contents of your SD card to an external drive. Specifically, nandroid backups, rom, kernel, themes & mods that you don't want to redownload, etcetera. Still, as teh roxxorz stated, if you want to completely make it like it was when you purchased it, download an RUU from http://forum.xda-developers.com/sho...ard itself. Afterwards, flash the RUU....Take care...
Okay thanks for the info, I was thinking that was the process but wanted to be sure first.
well this sucks i've lost my market place app, any ideas?
1buell1125r said:
well this sucks i've lost my market place app, any ideas?
Click to expand...
Click to collapse
If you're on sense...I'd recommend reflashing the rom, and if on AOSP, flash the latest gapps.
I have gingerbread on my evo 4g....
I'm in the process of trying to root my EVO solely to gain WIFI tethering access for my new TV.
I've read tutorials about rooting here and there over the past year but never felt like i quite got it, so i didn't do it. Well I decided to try it out with this guide:
it won't let me post the url, but it's the one on goodandevo for gingerbread
Everything went well with this process up until the Nandroid backup. I backed up I guess my current stock ROM?(although I don't know where to find it??) I then downloaded the "Wireless-N bug fix" rom and stuck it on my SD card. I then flashed it through my boot screen, then selected the zip......
and here is where i'm at:
1. booted into my phone, it looks completely unchanged(stock rom). HOWEVER, wifi antenna quit working.
2. i went into the boot screen and "s-off" shows so something worked?
3. when i try to install the wifi tethering, it says i'm not rooted.
OBVIOUSLY i'm doing something wrong. the article mentions Amon Ra Recovery as well as PC36IMG.zip and being the noob that i am as it relates to rooting, these mean nothing to me. any help is appreciated.
If you boot into recovery from the bootloader, do you see clockwork or a triangle and red ! ? If you see the latter, you have no recovery, and the amon_ra recovery can be found in the the development section [type it in the search], where you will get the PC36IMG and instructions on how to flash it. Then you can flash the zip in recovery. Also, if you download wireless tether from the market [free] you'll be set to tether.
i went into my bootloader and then recovery. the screen went to the "white HTC EVO" screen, then it loaded into a REVOLUTIONARY screen with this menu
-reboot system now
-apply update from sd card
-wipe data/factory reset
etc.
so you're saying a need the amon-RA and the pc36img.zip? will this fix the wifi antenna problem too? thx again for your help.
jsny said:
i went into my bootloader and then recovery. the screen went to the "white HTC EVO" screen, then it loaded into a REVOLUTIONARY screen with this menu
-reboot system now
-apply update from sd card
-wipe data/factory reset
etc.
so you're saying a need the amon-RA and the pc36img.zip? will this fix the wifi antenna problem too? thx again for your help.
Click to expand...
Click to collapse
I believe the revolutionary is a form a clockwork and you CAN flash your wifi zip now, but you may get an error about amend scripting, ect. And amon_ra will be in the PC36IMG that you flash in the bootloader. From there, you will flash your zip, and you should be good.
i have now flashed 4.24.651.1-802.11n-fix-signed.zip twice from my REVOLUTIONARY recovery screen and it says it loaded successfully, but still won't load apps requiring root, AND wifi is still broken =(
jsny said:
i have now flashed 4.24.651.1-802.11n-fix-signed.zip twice from my REVOLUTIONARY recovery screen and it says it loaded successfully, but still won't load apps requiring root, AND wifi is still broken =(
Click to expand...
Click to collapse
The first part sounds like you don't have superuser installed, or the binaries didn't flash; it happened while I rooted a friend's thunderbolt.
1. download and install superuser from the market
2. http://forum.xda-developers.com/showthread.php?t=682828 < download and flash the second zip in recovery [the froyo/eclair]
3. go into the superuser app, tap settings, then hit update, and it should be working
And the wifi broke after you flashed the zip?
ok. i flashed the pc36img.zip file and updated. also then reflashed the 4.24.651.1-802.11n-fix-signed.zip and WIFI radio still isn't working??
super bummer
jsny said:
ok. i flashed the pc36img.zip file and updated. also then reflashed the 4.24.651.1-802.11n-fix-signed.zip and WIFI radio still isn't working??
super bummer
Click to expand...
Click to collapse
I would recommend restoring your original backup, because it seems that the zip file broke your wifi, that's when it stopped working correct? Or try flashing a new stock rooted rom of that same firmware and try it again, because I'm sure the wifi driver was under attack.
teh roxxorz said:
I would recommend restoring your original backup, because it seems that the zip file broke your wifi, that's when it stopped working correct? Or try flashing a new stock rooted rom of that same firmware and try it again, because I'm sure the wifi driver was under attack.
Click to expand...
Click to collapse
ok tech roxxx. thx. can i restore to my original rom after being rooted? i've never restored, how is that done? i went into bootloader and then recovery, then restore and chose nandroid restore. it said it couldn't find the file?
stuff is confusing sometimes.
also, now that i placed the pc36img.zip on sd root file, everytime i go into bootloader it ask's if i want to update. is it okay to move that file? delete it? what's the way of handing it, and any other zip files for that matter in the root sd?
jsny said:
ok tech roxxx. thx. can i restore to my original rom after being rooted? i've never restored, how is that done? i went into bootloader and then recovery, then restore and chose nandroid restore. it said it couldn't find the file?
stuff is confusing sometimes.
also, now that i placed the pc36img.zip on sd root file, everytime i go into bootloader it ask's if i want to update. is it okay to move that file? delete it? what's the way of handing it, and any other zip files for that matter in the root sd?
Click to expand...
Click to collapse
Sorry, I had to run out. That would be he correct method to restore. Though to handle the PC36IMG, you can delete it, or rename it to somethign else like PC36IMG_amon, so you know what it is for future use, if you ever had to flash the recovery again.
still no wifi? i tried restoring but it said it couldn't find the file?
tried flashing a new radio, but it still won't start up the wifi?
You should have a folder on your sdcard for backup... Not sure what revolutionary calls it... But it has to be there unless you moved it or anything. The recovery looks for an exact folder with exact file names so if anything changed it won't work.
On the wireless n fix, you shouldn't have flashed that as I believe wireless n is already a part of gingerbread... May be wrong but I never had to flash it. All you will need is wifi tether app from market.
At this point you may have to do a full wipe and flash a new ROM, granted you will lose all your data. However you can flash the new Sprint update, which I am on now and it is quite smooth.
Be sure your contacts are backed up to Google. If you have apps you want backed up get Titanium backup. Emails and texts will be gone, though i'm sure there is a way i've never really cared.
Grab this:
http://forum.xda-developers.com/showthread.php?t=1243320
Wipe everything in recovery except sdcard then flash the .zip you download from that link.
You will still have a mostly stock Evo but it's rooted with superuser already installed. Then get wireless tether app from the market.
Sent from my PC36100 using xda premium
thank you i'm her old man. i'm going to try what you've said now. i'll post back with results. as for my back up? i'm not sure where it went, and as long as it doesn't mess my phone up, i'm going to clean up my sd card a tad too. i don't think it will harm anything. never should have flashed that rom, goodandevo made it sound benign.
thanks again tho.
**UPDATE**
i downloaded titanium backup and i get an error that "superuser" has forced closed. something is a miss? i'm more than frustrated. i'm really not concerned with email's/contacts since they're all cloud based. what's the easiest way to get a clean root like what you have?? at this point i'd probably drive over my phone if someone said that's what it took....=/
in recovery it says:
wipe ALL usuerdata/factory reset
wipe cache
wipe dalvik-cache
wipe SDCARD (don't wipe this i right)
wipe boot
wipe system
wipe SDCARD (don't wipe this)
wipe SDEXT
wipe DATA: batttery
wipe DATA: rotate settings
i'm afraid to wipe "boot" and "system" those sound important. but i'm just doing what you've mentioned.
jsny said:
in recovery it says:
wipe ALL usuerdata/factory reset
wipe cache
wipe dalvik-cache
wipe SDCARD (don't wipe this i right)
wipe boot
wipe system
wipe SDCARD (don't wipe this)
wipe SDEXT
wipe DATA: batttery
wipe DATA: rotate settings
i'm afraid to wipe "boot" and "system" those sound important. but i'm just doing what you've mentioned.
Click to expand...
Click to collapse
Yea you need those to boot into the system. Did you flash the rooted stock rom he linked you to, as that would be a quick fix.
Do wipe those they will be replaced when you flash the new ROM
Sent from my PC36100 using xda premium
BAAaaaaRICK!
imheroldman said:
Do wipe those they will be replaced when you flash the new ROM
Sent from my PC36100 using xda premium
Click to expand...
Click to collapse
i wiped them and it bricked my phone. luckily the manager at sprint was uber nice and gave me a replacement since i'd been a longtime customer.
i guess i have no business rooting my phone if i don't understand the process. i figured i'd root it now since evo 4g probably won't be getting anymore MAJOR android updates? but....maybe i should leave this one be.
are there any close to fail safe guides for "rooting for dummies?"
Revolutionary error message
Hello, I am new to the this forum. I did as the best I could to find a relevant forum to post this.
When I run revolutionary to root my HTC Evo 4G I get an error message that reads.
"Failed to communicate with existing ADB (Android Debugging Bridge) service"
I have the lastest SDK and everything downloaded.
Can anyone explain why this keeps happening? (Note: I am running this through vitualbox for windows 7 because my current OS is the windows 8 Developer preview and doesn't install the HTC drivers.
Any help on this would be very much appreciated. Thank you for your time
Heavywater88 said:
Hello, I am new to the this forum. I did as the best I could to find a relevant forum to post this.
When I run revolutionary to root my HTC Evo 4G I get an error message that reads.
"Failed to communicate with existing ADB (Android Debugging Bridge) service"
I have the lastest SDK and everything downloaded.
Can anyone explain why this keeps happening? (Note: I am running this through vitualbox for windows 7 because my current OS is the windows 8 Developer preview and doesn't install the HTC drivers.
Any help on this would be very much appreciated. Thank you for your time
Click to expand...
Click to collapse
Happened to me. Had to go run revolutionary manually.
Sent from my PC36100 using XDA App
Hi, I will have my hands on this tablet very soon and want to use the Cleanrom that is listed in a thread here. This will be my first time doing this and have been searching around for a guide. I have read a few bits and pieces but would like someone to explain in a few steps so i can get this right the first time.
I found a guide to Root it at rootgalaxynote.com but would like to understand how to install the CleanROM.
Hello,
You have to install TWRP Recovery first, then you need to copy Rom.zip to storage and then flash it using Recovery, dont forget about Wipe.
52224489
WeedyEyes said:
Hello,
You have to install TWRP Recovery first, then you need to copy Rom.zip to storage and then flash it using Recovery, dont forget about Wipe.
Click to expand...
Click to collapse
I havent installed anything yet as i will be receiving it for christmas. Not 100% sure on process so was posting here hoping someone could explain the process a bit more in laymans terms as this will be the first time i will be doing this. i understand you have to root the device so you can change the ROM, wasnt sure on what to do after that.
reetzy said:
I havent installed anything yet as i will be receiving it for christmas. Not 100% sure on process so was posting here hoping someone could explain the process a bit more in laymans terms as this will be the first time i will be doing this. i understand you have to root the device so you can change the ROM, wasnt sure on what to do after that.
Click to expand...
Click to collapse
All you need is to Install Custom Recovery to change ROM, that will allow you to do anything you want with your device (such as System Backup/Restore, installing .zip packages, and etc.) read thread about TWRP so you can find everything you need to know.
But notice the fact you'll lose your warranty installing custom roms, as I know there is no way to change warranty bit back to 0 yet.
All information you need to know about Custom Roms is already there.
WeedyEyes said:
All you need is to Install Custom Recovery to change ROM, that will allow you to do anything you want with your device (such as System Backup/Restore, installing .zip packages, and etc.) read thread about TWRP so you can find everything you need to know.
But notice the fact you'll lose your warranty installing custom roms, as I know there is no way to change warranty bit back to 0 yet.
All information you need to know about Custom Roms is already there.
Click to expand...
Click to collapse
Thanks Weedy :good: Once i get this tablet i will give it a go.
Can you give me a link to the TWRP thread you refereed to thanks.
http://forum.xda-developers.com/showthread.php?t=2515656
Here you can find TWRP. I would recommend flashing the ".0"version because some people are having problems with the newer one
Worked fine for me , just did the same process as you
Sent by my Note 10.1 2014
benni2903 said:
http://forum.xda-developers.com/showthread.php?t=2515656
Here you can find TWRP. I would recommend flashing the ".0"version because some people are having problems with the newer one
Worked fine for me , just did the same process as you
Sent by my Note 10.1 2014
Click to expand...
Click to collapse
Thanks, all i need is Santa to hurry up now lol.
Are you sure you wanna get P600 not P605?
Make sure you get the right version, whether Quality or Exnyos. I had a freeze until I got the right version.
Sent from my SM-P600 using Tapatalk
In this guide what is this file for ?
Step 3. Download and unzip P600_Autoroot.zip:
rootgalaxynote.com/galaxy-note-10-1-root/how-to-root-galaxy-note-10-1-2014-edition/
Edit: Should i do this first before the TWPR?
Build says CleanRom 1.0 but all apps are still present
My build says CleanRom 1.0 but I still have all of the apps that others say are removed such as Sketchbook. My note was rooted using the AutoRoot file with Odin and then the stock recovery was flashed. I then used the twrp 3.0 file and booted into recovery. I then installed CleanRom (without reset per instructions) and the device rebooted and everything worked except all of the apps were still there. I then tried to re-flash CleanRom and perform the wipe but I then got stuck on the Samsung splash screen to no avail. I booted into recovery and tried re-flashing the CleanRom zip to no avail. All I could do to get this thing booted was to flash the auto-root file again in Odin, re-flash twrp, and install cleanrom again from the recovery but all of the apps are still there. Before I did any of this I had a bunch of the bloatware either frozen or uninstalled in Titanium but now some of those apps show lines through them in TBP. Either way, my device is showing CleanRom 1.0 under the build but I really don't think it is... any ideas on how to fix this?
Hi i'm a newbie on android
i've tried to install this rom a lot of time but unsuccessfully at any time
i've tried all the solutions i found here but none were successfull
i am under TWRP 2.6.3.0
my tablet is rooted but after the rom flash ,when i reboot ,just after the "galaxy note edition 2014" logo there's a black screen
the only way to repair is to flash with the mk1 stock rom after or to restore my old version saved with TWRP
can someone help ?
thanks
shoresteve626 said:
My build says CleanRom 1.0 but I still have all of the apps that others say are removed such as Sketchbook. My note was rooted using the AutoRoot file with Odin and then the stock recovery was flashed. I then used the twrp 3.0 file and booted into recovery. I then installed CleanRom (without reset per instructions) and the device rebooted and everything worked except all of the apps were still there. I then tried to re-flash CleanRom and perform the wipe but I then got stuck on the Samsung splash screen to no avail. I booted into recovery and tried re-flashing the CleanRom zip to no avail. All I could do to get this thing booted was to flash the auto-root file again in Odin, re-flash twrp, and install cleanrom again from the recovery but all of the apps are still there. Before I did any of this I had a bunch of the bloatware either frozen or uninstalled in Titanium but now some of those apps show lines through them in TBP. Either way, my device is showing CleanRom 1.0 under the build but I really don't think it is... any ideas on how to fix this?
Click to expand...
Click to collapse
Before flashing your rom perform a factory reset in twrp and format /data. All your apps will be deleted and you should be fine if you are stuck on the samsung boot logo it might help to boot into recovery and format /cache and dalvik cache
Sent by my Note 10.1 2014
Messed it up even more
benni2903 said:
Before flashing your rom perform a factory reset in twrp and format /data. All your apps will be deleted and you should be fine if you are stuck on the samsung boot logo it might help to boot into recovery and format /cache and dalvik cache
Sent by my Note 10.1 2014
Click to expand...
Click to collapse
So, I did the factory reset in twrp and then formatted the data. Naturally, everything was lost but when I went to install CleanRom it was no longer on the internal memory due to the format... but I did copy it to the Ext SD Card. MY problem is that twrp won't install the zip from the sd card. Each time it says its unable to mount "/data" even though I'm going into "advanced settings" and placing the check mark. I re-flashed twrp and tried using file manager to move the file to the internal storage but came up with the same problem. Also, I can't place the check on mount data for some reason. Now, my tablet starts to boot up but hangs on the samsung screen before the boot animation. Basically, its like there isn't any firmware on it and I tried re-doing the auto-root and stock recovery but thats a no go as well. Is this thing toasted?
shoresteve626 said:
So, I did the factory reset in twrp and then formatted the data. Naturally, everything was lost but when I went to install CleanRom it was no longer on the internal memory due to the format... but I did copy it to the Ext SD Card. MY problem is that twrp won't install the zip from the sd card. Each time it says its unable to mount "/data" even though I'm going into "advanced settings" and placing the check mark. I re-flashed twrp and tried using file manager to move the file to the internal storage but came up with the same problem. Also, I can't place the check on mount data for some reason. Now, my tablet starts to boot up but hangs on the samsung screen before the boot animation. Basically, its like there isn't any firmware on it and I tried re-doing the auto-root and stock recovery but thats a no go as well. Is this thing toasted?
Click to expand...
Click to collapse
Boot into TWRP and click "Restore Back Up" (Cannot remember exact verbiage) . Find where it says internal storage and press it and it will switch to a drop down and you can choose "External SD" Then go back and and it should be going to External SD instead of internal SD when you select install
Make sure you factory re-set. For safety, I advance wipe but I don't think that is necessary.
You may need to re-flash recovery if you're unable to access it.
shoresteve626 said:
So, I did the factory reset in twrp and then formatted the data. Naturally, everything was lost but when I went to install CleanRom it was no longer on the internal memory due to the format... but I did copy it to the Ext SD Card. MY problem is that twrp won't install the zip from the sd card. Each time it says its unable to mount "/data" even though I'm going into "advanced settings" and placing the check mark. I re-flashed twrp and tried using file manager to move the file to the internal storage but came up with the same problem. Also, I can't place the check on mount data for some reason. Now, my tablet starts to boot up but hangs on the samsung screen before the boot animation. Basically, its like there isn't any firmware on it and I tried re-doing the auto-root and stock recovery but thats a no go as well. Is this thing toasted?
Click to expand...
Click to collapse
Your device is not toasted I always have the Rom zip on the root directory of the device so formatting /data will not affect the rom zip. If you cant get it working then you might need to flash a firmware via odin and after that copy the rom on the internal root directory. Resetting your device should not format the whole internal storage so you can install the rom afterwards. Good luck mate
Sent by my Note 10.1 2014
Thanks for all the help!
benni2903 said:
Your device is not toasted I always have the Rom zip on the root directory of the device so formatting /data will not affect the rom zip. If you cant get it working then you might need to flash a firmware via odin and after that copy the rom on the internal root directory. Resetting your device should not format the whole internal storage so you can install the rom afterwards. Good luck mate
Sent by my Note 10.1 2014
Click to expand...
Click to collapse
After the holiday (and many stressful attempts) I was finally able to re-boot the device and get past the splash screen. Opening Kies seemed to "kick" past the splash screen even though it said my device wasn't compatible with Kies. Anyway, I flashed the stock recovery, wiped, reset, flashed original firmware via Odin, flashed TWRP again, and then installed the CleanRom zip. Phew... it's FINALLY over with no issues and running smooth. I think the problem came in with TWRP not wiping correctly even though it said it did. I do appreciate all of the help and advice as you guys are life-savers!
Exnyos?
sdelliott31 said:
Make sure you get the right version, whether Quality or Exnyos. I had a freeze until I got the right version.
Sent from my SM-P600 using Tapatalk
Click to expand...
Click to collapse
How do you know with version you have?
jkitsmiller said:
How do you know with version you have?
Click to expand...
Click to collapse
Wifi Only Version = P600 = Exynos processor
Lte = P605 = Snapdragon800
Gesendet von meinem SM-P600 mit Tapatalk
When I installed with TWRP 2.6.3.3 & 2.6.3.1 I got the write permission denied and then I tried with 2.6.3.0 it got hung while installing CleanRom 1.5R2. Does anyone know how to resolve this issue? Thanks
Hey everyone so I took my phone out of my pocket and it was stuck in a boot loop. I tried taking the battery out, volume up + power + home, volume down + power + home but nothing. I've tried booting it also without a battery.
I have Quantum running on my phone, and have never had any problems. The occasional restart but now my phone won't even get to the home screen. I get just a boot loop with normal sounds, and then my LED begins to flash. Then it just loops again ..
Don't really know what to do.
UPDATE: Update: After reading some more I decided to use this tutorial to flash back to factory: http://gs3.wonderhowto.com/how-to/r...sh-stock-roms-using-odin-for-windows-0142713/
Now that I have flashed to factory, I am stuck on the glowing samsung logo.. I have to tried factory reset / wipe but still nothing. Download mode is still working.
DELETED - irrelevant information.
StoneyJSG said:
DELETED
Click to expand...
Click to collapse
Why ?
Rovon said:
Why ?
Click to expand...
Click to collapse
Will your computer detect it if connected? (Odin, Heimdall, adb)
dawgdoc said:
Will your computer detect it if connected? (Odin, Heimdall, adb)
Click to expand...
Click to collapse
Yes computer is detecting it with Odin.
Rovon said:
Yes computer is detecting it with Odin.
Click to expand...
Click to collapse
What is on the phone's screen while the device is detected by Odin?
There are a couple of notn-standard images that will actually function as download mode, allowing you to reflash a custom recovery. And then, hopefully restore a nandroid of your rom.
dawgdoc said:
What is on the phone's screen while the device is detected by Odin?
There are a couple of notn-standard images that will actually function as download mode, allowing you to reflash a custom recovery. And then, hopefully restore a nandroid of your rom.
Click to expand...
Click to collapse
I get two options for either volume up and volume down. After pressing volume up I got the android with "Downloading Do not turn off target"
Rovon said:
I get two options for either volume up and volume down. After pressing volume up I got the android with "Downloading Do not turn off target"
Click to expand...
Click to collapse
Update: After reading some more I decided to use this tutorial to flash back to factory: http://gs3.wonderhowto.com/how-to/r...sh-stock-roms-using-odin-for-windows-0142713/
Now that I have flashed to factory, I am stuck on the glowing samsung logo.. I have to tried factory reset / wipe but still nothing. Download mode is still working.
Rovon said:
Update: After reading some more I decided to use this tutorial to flash back to factory: http://gs3.wonderhowto.com/how-to/r...sh-stock-roms-using-odin-for-windows-0142713/
Now that I have flashed to factory, I am stuck on the glowing samsung logo.. I have to tried factory reset / wipe but still nothing. Download mode is still working.
Click to expand...
Click to collapse
I agree with dawgdoc. Use Odin to reflash the latest version of TWRP, or the custom recovery of your choice. Uncheck auto reboot before you flash. Upon successful flash when it says reset in the status window unplug USB then pull the battery. Replace battery and try to boot to recovery with vol up + home + power; keep holding all three for a second or two after it vibrates until you see the blue text for booting to recovery (hopefullly)...
Then restore a nandroid backup, or load CM 10 or 11 on a microsd and flash that.
jason2678 said:
I agree with dawgdoc. Use Odin to reflash the latest version of TWRP, or the custom recovery of your choice. Uncheck auto reboot before you flash. Upon successful flash when it says reset in the status window unplug USB then pull the battery. Replace battery and try to boot to recovery with vol up + home + power; keep holding all three for a second or two after it vibrates until you see the blue text for booting to recovery (hopefullly)...
Then restore a nandroid backup, or load CM 10 or 11 on a microsd and flash that.
Click to expand...
Click to collapse
Using the same battery but now I can't get into recovery at all. I get the little blue text in the top left hand corner but I can't get to recovery.
Edit: Just realized I used the wrong TWRP for my phone. I redid everything and now I can get into Recovery mode. Going to try and put a rom on my device. Will be back shortly with an update.
Rovon said:
Using the same battery but now I can't get into recovery at all. I get the little blue text in the top left hand corner but I can't get to recovery.
Edit: Just realized I used the wrong TWRP for my phone. I redid everything and now I can get into Recovery mode. Going to try and put a rom on my device. Will be back shortly with an update.
Click to expand...
Click to collapse
So I keep getting a bunch of errors with TWR. I tried installing AOKP but got stuck at a boot screen again, and after trying to wipe my phone I get an error message saying "Failed". Now I'm trying install Quantum again but get an error message saying "Zip file is corrupt". T__T
Going to try another rom..
Update: I've tried Quantum again and it finally installed but now I'm stuck in a bootloop again. This is so frustrating ...
It seems like you are on the correct track. Don't give up.
Hopefully it is not a matter of the internal sdcard going bad.
If you continue to have trouble you might consider reflashing the bootloader and modem that the phone is currently on, or a newer one.
dawgdoc said:
It seems like you are on the correct track. Don't give up.
Hopefully it is not a matter of the internal sdcard going bad.
If you continue to have trouble you might consider reflashing the bootloader and modem that the phone is currently on, or a newer one.
Click to expand...
Click to collapse
Installed Clockworkmod to see if TWR was the issue and still I'm getting boot looped. Is there a clean start from scratch method I can do that guarantees a fix for this ?Although I didn't get any errors with Clockworkmod just getting looped again. I haven't tried anything with the bootloader and modem. Is there a updated tutorial on this? I can't find anything
Rovon said:
Installed Clockworkmod to see if TWR was the issue and still I'm getting boot looped. Is there a clean start from scratch method I can do that guarantees a fix for this ?Although I didn't get any errors with Clockworkmod just getting looped again. I haven't tried anything with the bootloader and modem. Is there a updated tutorial on this? I can't find anything
Click to expand...
Click to collapse
Couple of thoughts:
Is there any chance that following the tutorial in your original post you tried flashing a ROM image using Odin that had a bootloader different that what was on your phone when it was working normally? If so was it an older or newer version.? If older, then reflash the newer one that was previously on the phone, along with its matching bootloader.
It could be that a full wipe before trying again to flash the ROM would be what you need.
If the wipe doesn't work you may need to flash a stock based ROM and then go back to Quantum, or whatever you choose.
dawgdoc said:
Couple of thoughts:
Is there any chance that following the tutorial in your original post you tried flashing a ROM image using Odin that had a bootloader different that what was on your phone when it was working normally? If so was it an older or newer version.? If older, then reflash the newer one that was previously on the phone, along with its matching bootloader.
It could be that a full wipe before trying again to flash the ROM would be what you need.
If the wipe doesn't work you may need to flash a stock based ROM and then go back to Quantum, or whatever you choose.
Click to expand...
Click to collapse
I honestly don't remember .. Any tutorials on doing a proper full wipe for my device? I did try initially flashing a stock based rom, but I'll try it again with Clockwork.
Also, how do I know which bootloader is correct and which files to flash if I can't access the info through my phone. I swear half of these damn tutorials have broken links and only spam files. I don't know what to do since there's so many damn options... I'm ready to throw my phone against a wall.
Rovon said:
I honestly don't remember .. Any tutorials on doing a proper full wipe for my device? I did try initially flashing a stock based rom, but I'll try it again with Clockwork.
Also, how do I know which bootloader is correct and which files to flash if I can't access the info through my phone. I swear half of these damn tutorials have broken links and only spam files. I don't know what to do since there's so many damn options... I'm ready to throw my phone against a wall.
Click to expand...
Click to collapse
You still have download mode and recovery working, so there's still some things you can try. Don't smash it just yet.
I know how feel about searching for information on this phone. It's either fragmented and spread across a dozen forum posts, or you find stuff from tech websites and whatnot that is really dated. To make matters worse, some of the changes Samsung made to the more recent bootloaders made those dated articles and forum threads downright dangerous (stupid Knox and efuses). There are plenty of landmines and some bear traps out there.
Since TWRP is still functioning you can check what bootloader you're using; it's good to know if you aren't sure. I think you could do this on CWM too, but you'd have to use a computer and adb shell. Might be easier just to flash TWRP 2.8.5 back as your recovery if you don't already have adb and drivers set up on your computer. Boot into TWRP and go to Advanced -> Terminal Command -> the Select. In the command line enter:
Code:
getprop ro.bootloader
That will output your bootloader. Report that back here. It is not safe to flash any firmware updates with Odin or custom recovery without knowing your current bootloader version. Flashing wrong, downgraded, or mismatched firmware is the #1 way to brick this phone and it can be hard to recover from.
Was your storage encrypted when you were running normally?
The usual clean flash procedure for TWRP is this: Pick Wipe -> Advanced then tick dalvik cache, cache, system, and data then slide to wipe. These wipes will not touch files stored in your internal sdcard. Once those wipes are complete you're typically set to flash your new rom and Gapps, but...
If the rom zip you're going to flash is loaded on an external SD card you can also format the internal SD, also under Wipe. This will erase all your pictures, user data, etc stored on internal sdcard (you've been warned); it will also erase the rom you're going to flash if it is stored there. Do not format the internal SD if you aren't using an external SD card, or you'll have a blank phone with no rom to flash. You can recover from this with adb, but it can be tricky if you aren't familiar with it so just don't do it . The way your phone is behaving (spontaneously bootlooping in your pocket) I would consider formatting the internal storage, provided you have an external SD available to flash files from after formatting your phone. Any files that you must save on internal storage you could move to external SD with TWRPs file manager.
If a good clean flash and possibly fixing up your firmware doesn't cure it, I've heard TWRP and Odin just aren't as thorough as a full wipe in the stock recovery. Loading stock recovery and doing a factory reset in it might not be a bad next step, but check on the firmware and make certain you do a proper clean flash before you resort to stock recovery.
jason2678 said:
You still have download mode and recovery working, so there's still some things you can try. Don't smash it just yet.
I know how feel about searching for information on this phone. It's either fragmented and spread across a dozen forum posts, or you find stuff from tech websites and whatnot that is really dated. To make matters worse, some of the changes Samsung made to the more recent bootloaders made those dated articles and forum threads downright dangerous (stupid Knox and efuses). There are plenty of landmines and some bear traps out there.
Since TWRP is still functioning you can check what bootloader you're using; it's good to know if you aren't sure. I think you could do this on CWM too, but you'd have to use a computer and adb shell. Might be easier just to flash TWRP 2.8.5 back as your recovery if you don't already have adb and drivers set up on your computer. Boot into TWRP and go to Advanced -> Terminal Command -> the Select. In the command line enter:
Code:
getprop ro.bootloader
That will output your bootloader. Report that back here. It is not safe to flash any firmware updates with Odin or custom recovery without knowing your current bootloader version. Flashing wrong, downgraded, or mismatched firmware is the #1 way to brick this phone and it can be hard to recover from.
Was your storage encrypted when you were running normally?
The usual clean flash procedure for TWRP is this: Pick Wipe -> Advanced then tick dalvik cache, cache, system, and data then slide to wipe. These wipes will not touch files stored in your internal sdcard. Once those wipes are complete you're typically set to flash your new rom and Gapps, but...
If the rom zip you're going to flash is loaded on an external SD card you can also format the internal SD, also under Wipe. This will erase all your pictures, user data, etc stored on internal sdcard (you've been warned); it will also erase the rom you're going to flash if it is stored there. Do not format the internal SD if you aren't using an external SD card, or you'll have a blank phone with no rom to flash. You can recover from this with adb, but it can be tricky if you aren't familiar with it so just don't do it . The way your phone is behaving (spontaneously bootlooping in your pocket) I would consider formatting the internal storage, provided you have an external SD available to flash files from after formatting your phone. Any files that you must save on internal storage you could move to external SD with TWRPs file manager.
If a good clean flash and possibly fixing up your firmware doesn't cure it, I've heard TWRP and Odin just aren't as thorough as a full wipe in the stock recovery. Loading stock recovery and doing a factory reset in it might not be a bad next step, but check on the firmware and make certain you do a proper clean flash before you resort to stock recovery.
Click to expand...
Click to collapse
+1
also to confirm modem , type in ...
getprop | grep version.baseband
"all i can really do , is stay out of my own way and let the will of heaven be done"
jason2678 said:
You still have download mode and recovery working, so there's still some things you can try. Don't smash it just yet.
I know how feel about searching for information on this phone. It's either fragmented and spread across a dozen forum posts, or you find stuff from tech websites and whatnot that is really dated. To make matters worse, some of the changes Samsung made to the more recent bootloaders made those dated articles and forum threads downright dangerous (stupid Knox and efuses). There are plenty of landmines and some bear traps out there.
Since TWRP is still functioning you can check what bootloader you're using; it's good to know if you aren't sure. I think you could do this on CWM too, but you'd have to use a computer and adb shell. Might be easier just to flash TWRP 2.8.5 back as your recovery if you don't already have adb and drivers set up on your computer. Boot into TWRP and go to Advanced -> Terminal Command -> the Select. In the command line enter:
Code:
getprop ro.bootloader
That will output your bootloader. Report that back here. It is not safe to flash any firmware updates with Odin or custom recovery without knowing your current bootloader version. Flashing wrong, downgraded, or mismatched firmware is the #1 way to brick this phone and it can be hard to recover from.
Was your storage encrypted when you were running normally?
The usual clean flash procedure for TWRP is this: Pick Wipe -> Advanced then tick dalvik cache, cache, system, and data then slide to wipe. These wipes will not touch files stored in your internal sdcard. Once those wipes are complete you're typically set to flash your new rom and Gapps, but...
If the rom zip you're going to flash is loaded on an external SD card you can also format the internal SD, also under Wipe. This will erase all your pictures, user data, etc stored on internal sdcard (you've been warned); it will also erase the rom you're going to flash if it is stored there. Do not format the internal SD if you aren't using an external SD card, or you'll have a blank phone with no rom to flash. You can recover from this with adb, but it can be tricky if you aren't familiar with it so just don't do it . The way your phone is behaving (spontaneously bootlooping in your pocket) I would consider formatting the internal storage, provided you have an external SD available to flash files from after formatting your phone. Any files that you must save on internal storage you could move to external SD with TWRPs file manager.
If a good clean flash and possibly fixing up your firmware doesn't cure it, I've heard TWRP and Odin just aren't as thorough as a full wipe in the stock recovery. Loading stock recovery and doing a factory reset in it might not be a bad next step, but check on the firmware and make certain you do a proper clean flash before you resort to stock recovery.
Click to expand...
Click to collapse
Thank you for the information. It's good to know that me being unable to find a solution wasn't just due to my frustration.
My bootloader is: I747UCDLK3
I did do the same type of wipe but all of my roms are on an external SD card. I was under the impression the internal storage was wiped completely. I currently have Quantum / Gapps / Kernel all stored on the external SD. At this point whatever it takes to get my phone working again will do.
mrrocketdog said:
+1
also to confirm modem , type in ...
getprop | grep version.baseband
"all i can really do , is stay out of my own way and let the will of heaven be done"
Click to expand...
Click to collapse
Hmm .. that command didn't seem to pull anything up for me.
Rovon said:
Thank you for the information. It's good to know that me being unable to find a solution wasn't just due to my frustration.
My bootloader is: I747UCDLK3
I did do the same type of wipe but all of my roms are on an external SD card. I was under the impression the internal storage was wiped completely. I currently have Quantum / Gapps / Kernel all stored on the external SD. At this point whatever it takes to get my phone working again will do.
Hmm .. that command didn't seem to pull anything up for me.
Click to expand...
Click to collapse
LK3 is a pretty out of date bootloader, and in this case that might be a good thing.
You can go to sammobile.com and download the full firmware for your phone and flash it with Odin: http://www.sammobile.com/firmwares/database/SGH-I747/
For reference the newer firmwares (MJB, NE4, and NJ1) cannot be downgraded, any attempt will result in a brick. On LK3 you are safe. Repeat, don't try this at home unless you know what bootloader version you have.
This will Odin your phone back to pure stock Jellybean. This used to be the go to method for fixing screwed up S3's before Samsung started bricking us for downgrading the firmware at version MJB.
jason2678 said:
LK3 is a pretty out of date bootloader, and in this case that might be a good thing.
You can go to sammobile.com and download the full firmware for your phone and flash it with Odin: http://www.sammobile.com/firmwares/database/SGH-I747/
For reference the newer firmwares (MJB, NE4, and NJ1) cannot be downgraded, any attempt will result in a brick. On LK3 you are safe. Repeat, don't try this at home unless you know what bootloader version you have.
This will Odin your phone back to pure stock Jellybean. This used to be the go to method for fixing screwed up S3's before Samsung started bricking us for downgrading the firmware at version MJB.
Click to expand...
Click to collapse
Alright I'm downloading this now. Assuming this works, should I do an OTA update then root or am I safe to root the device from odin as soon as this bootloader is installed?
Right, so. Managed to unlock and root my M9 successfully, no problems, using a good guide, which included making a Nandroid backup prior to rooting.
So I decide to get rid of LeeDroid and restore my Nandroid backup. All went well. Then TWRP asks if I want to install SuperSU as my device isn't rooted. So swipe yes, and it goes through the usual list, and just as it gets to the last line my phone goes off, and reboots.
I've tried both the stable and beta and always get the same damn crash/reboot, tried the mounting methods, but NOTHING works!
Could anyone shed any light as to why? It's the GSM variant of the M9.
Vesten said:
Right, so. Managed to unlock and root my M9 successfully, no problems, using a good guide, which included making a Nandroid backup prior to rooting.
So I decide to get rid of LeeDroid and restore my Nandroid backup. All went well. Then TWRP asks if I want to install SuperSU as my device isn't rooted. So swipe yes, and it goes through the usual list, and just as it gets to the last line my phone goes off, and reboots.
I've tried both the stable and beta and always get the same damn crash/reboot, tried the mounting methods, but NOTHING works!
Could anyone shed any light as to why? It's the GSM variant of the M9.
Click to expand...
Click to collapse
what exact version of twrp?
Is the backup a system IMAGE backup?
are you entering TWRP in read-only mode?
When you try to restore now, what does the terminal output say?
TWRP version 2.8.7.0
The backup was made using TWRP after flashing it for the first time, which included the usual data, system, etc.
Not sure about TWRP entering read only mode. I read it only does this on unmodified software. Mine is still saying modified even after restoring my nandroid.
Also unsure of what the terminal says without copying the log. Can restore it as many times as I want.
Can't be much more help until I get to a PC.
I'm still S-On, etc. Have a feeling it's to do with the TWRP read only thing...
Vesten said:
TWRP version 2.8.7.0
The backup was made using TWRP after flashing it for the first time, which included the usual data, system, etc.
Not sure about TWRP entering read only mode. I read it only does this on unmodified software. Mine is still saying modified even after restoring my nandroid.
Also unsure of what the terminal says without copying the log. Can restore it as many times as I want.
Can't be much more help until I get to a PC.
I'm still S-On, etc. Have a feeling it's to do with the TWRP read only thing...
Click to expand...
Click to collapse
well, when you go to restore twrp, does it say unable to wipe system/cache, etc?
If so, go into the mount menu and put a check mark in the system read only box, then uncheck it and try to restore again.
If that doesn't work, try updating to the latest twrp, which is 2.8.7.1. http://forum.xda-developers.com/devdb/project/?id=8915#downloads
jollywhitefoot said:
well, when you go to restore twrp, does it say unable to wipe system/cache, etc?
If so, go into the mount menu and put a check mark in the system read only box, then uncheck it and try to restore again.
If that doesn't work, try updating to the latest twrp, which is 2.8.7.1. http://forum.xda-developers.com/devdb/project/?id=8915#downloads
Click to expand...
Click to collapse
I'll have to check, but don't think it does.
I'll try that new version of TWRP and report back.
Many thanks for the help, greatly appreciated.
jollywhitefoot said:
well, when you go to restore twrp, does it say unable to wipe system/cache, etc?
If so, go into the mount menu and put a check mark in the system read only box, then uncheck it and try to restore again.
If that doesn't work, try updating to the latest twrp, which is 2.8.7.1. http://forum.xda-developers.com/devdb/project/?id=8915#downloads
Click to expand...
Click to collapse
Flashed that latest TWRP. Then tried flashing SuperSU. Same thing. Just shuts off completely and reboots back to Android.
In the mount menu, system is unchecked. and the bottom "Only mount system read-only" is also unchecked.
The Terminal log gets to..
"Placing files..."
Restoring files..."
Then shuts off. I'm starting to think I'm going to have to flash a stock RUU and start from scratch.
BTW this is after checking system. It seems to do nothing at all.
EDIT: Would not having an external SD in it matter at all? I originally flashed SuperSU using the internal SD card.
Vesten said:
Flashed that latest TWRP. Then tried flashing SuperSU. Same thing. Just shuts off completely and reboots back to Android.
In the mount menu, system is unchecked. and the bottom "Only mount system read-only" is also unchecked.
The Terminal log gets to..
"Placing files..."
Restoring files..."
Then shuts off. I'm starting to think I'm going to have to flash a stock RUU and start from scratch.
BTW this is after checking system. It seems to do nothing at all.
EDIT: Would not having an external SD in it matter at all? I originally flashed SuperSU using the internal SD card.
Click to expand...
Click to collapse
What happens when you restore your backup and reboot without installing supersu?
jollywhitefoot said:
What happens when you restore your backup and reboot without installing supersu?
Click to expand...
Click to collapse
Will let you know soon. Just restoring again.
When I made the Nandroid backup, there's a new option to backup recovery too, which I did. Could this mean anything? I'm assuming it's backed up TWRP because stock obviously wasn't present when making the backup.
Will try and screenshot the log.
Vesten said:
Will let you know soon. Just restoring again.
When I made the Nandroid backup, there's a new option to backup recovery too, which I did. Could this mean anything? I'm assuming it's backed up TWRP because stock obviously wasn't present when making the backup.
Will try and screenshot the log.
Click to expand...
Click to collapse
Yeah backing up recovery doesn't matter....as you suspected it just backs up twrp, so if you backed up the older version, then updated it, don't restore the old version
jollywhitefoot said:
Yeah backing up recovery doesn't matter....as you suspected it just backs up twrp, so if you backed up the older version, then updated it, don't restore the old version
Click to expand...
Click to collapse
Interesting. There's nothing saying it couldn't write anything..
Just tried opening SuperSU from my restored backup, and hits me with "There is no SuperSU binary installed!" This is a problem, blah, blah, etc.
Then tried check-boxing the 'system' box in the Mount section. Then tried flashing UPDATESuperSu.VsXX and just gave me the usual as said above. Crashed and reboots.
https://www.dropbox.com/s/cvkclw8xuzua4u3/2015-07-20 21.56.37.png?dl=0
Losing the will to live! Ha
What about trying to push SuperSU via ADB?
EDIT: Think I'm getting ahead of myself. Not possible to flash SuperSU via ADB is it..?
Vesten said:
What about trying to push SuperSU via ADB?
EDIT: Think I'm getting ahead of myself. Not possible to flash SuperSU via ADB is it..?
Click to expand...
Click to collapse
The only way I ever do it is by swiping to install as I'm rebooting out of recovery.
jollywhitefoot said:
The only way I ever do it is by swiping to install as I'm rebooting out of recovery.
Click to expand...
Click to collapse
Would you say the nuclear option would be to sit and bide my time until a decent RUU becomes available and start from scratch?
Vesten said:
Would you say the nuclear option would be to sit and bide my time until a decent RUU becomes available and start from scratch?
Click to expand...
Click to collapse
What's your ultimate goal? Stock, rooted? What cid and firmware are you on?
jollywhitefoot said:
What's your ultimate goal? Stock, rooted? What cid and firmware are you on?
Click to expand...
Click to collapse
Well I was going to sell the phone, since it's only 2 weeks old, and obviously for warranty reasons. So back to 100% stock, which includes it saying Software Status: Official and it saying "Locked" instead of re-locked.
CID is HTC__001
Firmware is Lollipop 5.0.2 - Software version 1.40.401.8 (CL549783 release-keys)
Vesten said:
Well I was going to sell the phone, since it's only 2 weeks old, and obviously for warranty reasons. So back to 100% stock, which includes it saying Software Status: Official and it saying "Locked" instead of re-locked.
CID is HTC__001
Firmware is Lollipop 5.0.2 - Software version 1.40.401.8 (CL549783 release-keys)
Click to expand...
Click to collapse
Then yeah, just ruu back to stock and bobs your uncle. You don't have to wait, an ruu is available for 1.40.401
jollywhitefoot said:
Then yeah, just ruu back to stock and bobs your uncle. You don't have to wait, an ruu is available for 1.40.401
Click to expand...
Click to collapse
What about stock recovery? Is that included I take it...?
Still getting used to all this in-depth flashing Android stuff. Managed to convert my M8 to the GP Edition without any trouble.
Vesten said:
What about stock recovery? Is that included I take it...?
Still getting used to all this in-depth flashing Android stuff. Managed to convert my M8 to the GP Edition without any trouble.
Click to expand...
Click to collapse
Yeah. That's included. If you did that then you can get that thing back to stock.
Probably find the ruu here: http://forum.xda-developers.com/one-m9/general/stock-nand-backup-ota-update-collection-t3132698
jollywhitefoot said:
Yeah. That's included. If you did that then you can get that thing back to stock.
Probably find the ruu here: http://forum.xda-developers.com/one-m9/general/stock-nand-backup-ota-update-collection-t3132698
Click to expand...
Click to collapse
Wow, thankyou! I've been Googling RUU's all night at work and found nothing like this. Think I'll do that and flash the RUU and start afresh!
Getting a killer 17.4 kbp/s though. 100mb connection wasted. Ha!
jollywhitefoot said:
Yeah. That's included. If you did that then you can get that thing back to stock.
Probably find the ruu here: http://forum.xda-developers.com/one-m9/general/stock-nand-backup-ota-update-collection-t3132698
Click to expand...
Click to collapse
Yay it worked! Using a stock image from that link. Something must of been really screwed up. I'm now re-rooted! Many thanks for your help!