Hello guys i am trying to flash a dirty unicorns rom but it says that i need to verify my phone is running the latest TWRP recovery. I am currently on the 2.8.5 version and i know that the 3.0 version is the newest one. I believe i read in a thread not to use FLASHIFY? Also do I HAVE TO update the recovery or am i ok with using the one i have? Thanks
Related
Hi everyone I flashed my GFs phone to I747UCDMG2 bootloader. Updated the TWRP to the latest via goomanager.
I get the following error when I try to install the zip. See the picture below, can someone help me? I am on Hypervision ROM RLS15
I suggest installing the latest Philz Touch Recovery via Odin.
audit13 said:
I suggest installing the latest Philz Touch Recovery via Odin.
Click to expand...
Click to collapse
this didn't help got the same error
Is it possible the device ID on the phone doesn't match the ROM? Have a look at the updater script in the ROM to make sure it matches the phone.
Hey guys ive gitten up to the point now where im rooted running cwms latest touch recovery. I need to upgrade my bootloader in order to flash any 4.3+ roms. Can someone help me with this process. Can I just flash the latest bootloader or can I flash a rooted 4.3 rom and flash the new bootloader after? Kinda stuck at the moment with the stock rooted 4.1.2 rom running latest cwm touch recovery.
pmb1903 said:
Hey guys ive gitten up to the point now where im rooted running cwms latest touch recovery. I need to upgrade my bootloader in order to flash any 4.3+ roms. Can someone help me with this process. Can I just flash the latest bootloader or can I flash a rooted 4.3 rom and flash the new bootloader after? Kinda stuck at the moment with the stock rooted 4.1.2 rom running latest cwm touch recovery.
Click to expand...
Click to collapse
I posted a link to help you in your other post
The link you posted leads to a rom thread. Is there something specific in there I should be looking for. The one you lead me to talks of downgrading not upgrading
Hello
I am currently running the latest version of TWRP (openrecovery-twrp-2.8.1.0-d2att) and I am trying to flash CM 11, but I get an error in red "Failed"
I am even getting a failed error as well when flashing the bootloader in the thread below.
I have successfully been able to flash SlimKat 4.4.4 and Dirty Unicorn with no problems. I think I had the same problems as well when trying to flash Paranoid Android.
I have tried flashing the files from both the external SD card and Internal. No go.
This is the thread I am following: http://forum.xda-developers.com/showthread.php?t=2682905
Here is the error I get when flashing:
You cannot flash from your current bootloader. Current version: I747MVLUEFNE6
E: Error executing updater binary in zip '/external_sd/Flash/CM/1/boot_CWM_I747MVLUEMK5.zip'
Try using the latest version of Philz Touch for the d2lte to flash files.
You can flash the most recent zip from TWRP.
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte/
audit13 said:
Try using the latest version of Philz Touch for the d2lte to flash files.
You can flash the most recent zip from TWRP.
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte/
Click to expand...
Click to collapse
Ok, so I flashed the latest zip using the TWRP App rebooted into PhilZ Recovery and tried to flash the bootloader ( boot_CWM_I747MVLUEMK5.zip) from here: http://forum.xda-developers.com/showthread.php?t=2321310
Still got an error: Please upgrade to latest binary...You cannot flash from your current bootloader. Current version: I747MLUFNE6
E: Error in /storage/sdcard1/Flash/CM/1/boot_CWM_I747MVLUENK5.zip (Status 7) Installation aborted
Do not flash any bootloader to your phone. It is good that it did not flash mk5 over ne6. This will brick for phone.
audit13 said:
Do not flash any bootloader to your phone. It is good that it did not flash mk5 over ne6. This will brick for phone.
Click to expand...
Click to collapse
Ok thanks. Where can I find the latest boot-loader for my device? I was trying to follow this guide to flash CM11 and it told me to download the latest boot-loader and update it: http://forum.xda-developers.com/showthread.php?t=2682905
I guess the thread I wrote above is an outdated guide to flashing CM11. Would you happen to know the steps I should take to flash cm11 for my device with my current bootloader?
BTW I still can't flash the CM11 Rom in Philz Touch Recovery.
Iv never had any issues using philz touch to flash.
drakemiller40 said:
Ok thanks. Where can I find the latest boot-loader for my device? I was trying to follow this guide to flash CM11 and it told me to download the latest boot-loader and update it: http://forum.xda-developers.com/showthread.php?t=2682905
I guess the thread I wrote above is an outdated guide to flashing CM11. Would you happen to know the steps I should take to flash cm11 for my device with my current bootloader?
BTW I still can't flash the CM11 Rom in Philz Touch Recovery.
Click to expand...
Click to collapse
You have the ne6 bootloader. Do you have an i747m or i747? It will make a difference when it comes to flashing an updated bootloader and modem.
Are you downloading the latest CM11 from the cyanogen site?
audit13 said:
You have the ne6 bootloader. Do you have an i747m or i747? It will make a difference when it comes to flashing an updated bootloader and modem.
Are you downloading the latest CM11 from the cyanogen site?
Click to expand...
Click to collapse
Thanks for helping out so far. My Model number that shows up in "About Device" in my phone's settings say SGH-I747M. Yes I am downloading the latest CM11 Nightly build here : http://download.cyanogenmod.org/?device=d2lte
P.S.
Will I bay able to go back to stock if I don't like CM11? I heard that it will brick my phone from rolling back the boot loaders. What if I restore from a nandroid backup, will that work to restore to stock without bricking my device?
With a custom recovery, you can create a backup, flash your ROM, and you can restore the backup if you don't like cm11.
audit13 said:
With a custom recovery, you can create a backup, flash your ROM, and you can restore the backup if you don't like cm11.
Click to expand...
Click to collapse
Ok thats good. Though I still have the problem of flashing CM11. It still fails on me on TWRP or Philz Touch Recovery. Any ideas on how to fix this problem?
What error are you getting? What cm11 ROM are you flashing?
audit13 said:
What error are you getting? What cm11 ROM are you flashing?
Click to expand...
Click to collapse
Never mind, found out that I had to run the factory reset in PhilZ Touch first then flash the rom. Alls good, but didn't like CM11.
Though why didn't it work on TWRP?
I had issues with TWRP flashing ROMs too. Once I switched to Philz which is based on CWM, I had no issues flashing the same ROMs that TWRP would not flash.
I'm trying to install the latest update to cm13 but it errors out. I'm only running stock CM with no custom kernel. I've also tried a full wipe and reinstall but get the same error message. Any help is appreciated.
Which rom are you running now? If it's lollipop based then you need to flash marshmallow to then flash cm13 over the top of it.
If you are s-on you have to use an ruu or an ota. If you are s-off there are plenty of zips around you can flash.
The principle is, you need a base rom to flash the "incomplete" cm13.
Sent from my HTC One M9 using Tapatalk
You need to update your firmware to the latest version and then you will be able to flash the new ROM.
Hi All,
Iv'e never posted here before, but I'm having issues updating to a newer version of TWRP and updating to the latest version of the ViperOne Rom.
I am currently using TWRP v2.8.7.0. I attempted to flash the latest version 3.0.2.0, but the recovery fails to load once I have flashed it. If i flash back to the older version the recovery works straight away.
The reason I am trying to install the newest TWRP is because newer ViperOne Roms don't seem to work when flashed. I am currently using ViperOneM9 V3.5.0. None of the later versions are working for me. Once I flash the newer Roms, the handset keeps booting back to the bootloader.
Does anyone have any idea why these problems are happening? I have no idea what to try next.
Thanks
JM92W said:
Hi All,
Iv'e never posted here before, but I'm having issues updating to a newer version of TWRP and updating to the latest version of the ViperOne Rom.
I am currently using TWRP v2.8.7.0. I attempted to flash the latest version 3.0.2.0, but the recovery fails to load once I have flashed it. If i flash back to the older version the recovery works straight away.
The reason I am trying to install the newest TWRP is because newer ViperOne Roms don't seem to work when flashed. I am currently using ViperOneM9 V3.5.0. None of the later versions are working for me. Once I flash the newer Roms, the handset keeps booting back to the bootloader.
Does anyone have any idea why these problems are happening? I have no idea what to try next.
Thanks
Click to expand...
Click to collapse
In one word, u must upgrade to a Marshmallow firmware, because latest versions are compatible only with Marshmallow (Android 6).
This is a good place to start reading:
http://forum.xda-developers.com/one-m9/general/stock-nand-backup-ota-update-collection-t3132698
Fain11 said:
In one word, u must upgrade to a Marshmallow firmware, because latest versions are compatible only with Marshmallow (Android 6).
This is a good place to start reading:
http://forum.xda-developers.com/one-m9/general/stock-nand-backup-ota-update-collection-t3132698
Click to expand...
Click to collapse
Thanks so much. I appreciate your help.