Note 7 does not boot anymore after Samsung update without warning - Note 7 Questions & Answers

hey all,
maybe someone can help make my note 7 boot again
after getting an update yesterday on my note 7 i saw it in message 15 sec to go even i unchecked automatic update it was updated automaticly,
it showed up some sec with that note7 white screen and hangs now with that message in left upper corner in the image here (Kernel Rev. Check Fail Device:1 Binary:0)
tryed all button combination but no success no way to power it down also . Today the display was total black if i charge it the message only appers again
hope ther is away to get it back to get my data
thankyou

Have you tied holding Power key and the Volume down key simultaneously for more than 7 seconds? It should make a restart or power off. When phone restarts try pressing HOME + VOLUME DOWN + POWER you should boot to download mode, then try flashing latest firmware with Odin or use Smart Switch. IF you can't get to dl mode I don't know any other way to fix the phone

thy mk)
i tried Volume down key simultaneously for more than 7 second then the red message dissapears for some seconds and comes back
in that download screen i can go btw it is not rooted or smth just original phone
but that mean to loose all Data at the end? and maybe garanty?

jojo34 said:
thy mk)
i tried Volume down key simultaneously for more than 7 second then the red message dissapears for some seconds and comes back
in that download screen i can go btw it is not rooted or smth just original phone
but that mean to loose all Data at the end? and maybe garanty?
Click to expand...
Click to collapse
Try smart switch program on you PC. And use emergency firmware restore. But it will wipe you data i believe.

thy very much mk
i managed to set it back fresh )
lost data but can be sure it is emty now so i can send it back )
next time i do faster backup i promise hehe

Related

samsung i780 how to hard reset

my fd got a i780 in hong kong and try to put in chinese rom failed.anyone knows how to do hard reset with it?
and any rom with wm6.1 eng for i780 ?
Spoke to Samsung today .... and it would appear that the rumours are true and that no -one including Samsung know how to perform hard reset !!
They also confirmed they would not be able to flash update the ROM to UK version for me .... GREAT !!!
I have located a friendly forum member who has a UK working version and is happy to dump the ROM .... but we don't know how to ....
Can anyone help in a step by step approach to dumping ROM and then creating a flashable version I can use?
Any help from anyone Really gratefully received ....
This is too bad.....has anyone tried using a program for Safemode on this ppc?.....perhaps thats the only way to perform a hardreset for those that are stuck on the welcome screen.....because the safemode will kick in when the ppc detects resets in a loop and then thats when you're able to enter the ppc in safemode just like a normal pc......i guess from here you can either uninstall the program that was incompatible or go through start-setting etc etc-hard reset option......anyone here cares to try this and let us know which safemode program they are using and if it works?.....thanks
You can Install RealVGA, and then also the Language Pack.
So you can change the Language of your i780.
Should we start a trial and error method on the hard reset?
Update:
200803122856
Result: (No luck)
Info: tried ALL single key with reset.
tried ALL combo of Fn to every keys.
tried ALL combo of Left soft/Right soft/Connect/Disconnect/Power button.
200803112310
Result: Got emergency mode key combo. Fn (the left lower button where you press for front row key) AND ENTER key and pin reset.
Info: tried ALL single key with reset.
utp said:
Should we start a trial and error method on the hard reset?
Update:
200803122856
Result: (No luck)
Info: tried ALL single key with reset.
tried ALL combo of Fn to every keys.
tried ALL combo of Left soft/Right soft/Connect/Disconnect/Power button.
200803112310
Result: Got emergency mode key combo. Fn (the left lower button where you press for front row key) AND ENTER key and pin reset.
Info: tried ALL single key with reset.
Click to expand...
Click to collapse
Thanks for all you testing....
What do you mean with "emergency mode"? And what about pin reset?
At the end.....are you able now to hard reset with this procedure?
Thanks a lot in advance.
vittogn said:
Thanks for all you testing....
What do you mean with "emergency mode"? And what about pin reset?
At the end.....are you able now to hard reset with this procedure?
Thanks a lot in advance.
Click to expand...
Click to collapse
No emergency mode does not give hard reset, it seems to be used for downloading ROM to flash using in OS Upgrade............
Should we start a trial and error method on the hard reset?
Update:
200803160031
Result: (No luck)
tried ALL combo of Q to every keys.
tried ALL combo of PWR to every keys.
tried Hold reset 30 secs
tried Hold reset 30 secs with PWR button
tried Hold reset 30 secs with CAM button
200803122856
Result: (No luck)
Info: tried ALL single key with reset.
tried ALL combo of Fn to every keys.
tried ALL combo of Left soft/Right soft/Connect/Disconnect/Power button.
200803112310
Result: Got emergency mode key combo. Fn (the left lower button where you press for front row key) AND ENTER key and pin reset.
Info: tried ALL single key with reset.
Anybody got a try:
http://www.ppcsg.com/index.php?showtopic=96268&st=230
samueltlc said:
Anybody got a try:
http://www.ppcsg.com/index.php?showtopic=96268&st=230
Click to expand...
Click to collapse
samueltc, tried, no luck.. it just soft reset the device...
utp said:
samueltc, tried, no luck.. it just soft reset the device...
Click to expand...
Click to collapse
Didn't work for me.
I had an idea... Use AEBPlus. Find the software app that does the hard reset and map it to a key combination in AEBPlus. Even is the screen does not work, if you know the password (usually 1234, enter) then this might work as a backup fix until another way is found.
ekerbuddyeker said:
I had an idea... Use AEBPlus. Find the software app that does the hard reset and map it to a key combination in AEBPlus. Even is the screen does not work, if you know the password (usually 1234, enter) then this might work as a backup fix until another way is found.
Click to expand...
Click to collapse
Thanks for your tip, as we cannot boot into the WM, so cannot install the app..... not talking about inputing password..
damn utp you're desparate XDDD
utp said:
Thanks for your tip, as we cannot boot into the WM, so cannot install the app..... not talking about inputing password..
Click to expand...
Click to collapse
Saw this in PPCSG Forums, maybe you could try this...
"Can someone try if the below steps can cold reset the I780???
1. Remove the storage card from the device, if one is
present.
2. With phone powered off:
 Press and hold both the left and right softkeys.
 While both softkeys are held down, press and
hold until the unit powers on.
3. As the device begins to power on, release both
softkeys.
Note Once the phone powers on, you should see an
onscreen alert message (a white screen with blue text).
If you do not see this screen, let the device power up
normally, turn it off again, and then repeat steps 2 and
4. Immediately after the alert screen appears, press
the left softkey.
5. If the reset was successful, the device displays a
pop-up message stating the device is currently
reformatting. This process can take several
minutes. Allow the process to finish without
interruption."
raiz07 said:
Saw this in PPCSG Forums, maybe you could try this...
"Can someone try if the below steps can cold reset the I780???
1. Remove the storage card from the device, if one is
present.
2. With phone powered off:
 Press and hold both the left and right softkeys.
 While both softkeys are held down, press and
hold until the unit powers on.
3. As the device begins to power on, release both
softkeys.
Note Once the phone powers on, you should see an
onscreen alert message (a white screen with blue text).
If you do not see this screen, let the device power up
normally, turn it off again, and then repeat steps 2 and
4. Immediately after the alert screen appears, press
the left softkey.
5. If the reset was successful, the device displays a
pop-up message stating the device is currently
reformatting. This process can take several
minutes. Allow the process to finish without
interruption."
Click to expand...
Click to collapse
just tried this....it doesn't work
irv777 said:
just tried this....it doesn't work
Click to expand...
Click to collapse
The search goes on...
So sorry to hear it doesn't work...
http://forum.xda-developers.com/showthread.php?t=370529&page=9
Should we start a trial and error method on the hard reset?
Update:
200803220357
Result: (No luck)
tried ALL combo of 3 to every keys.
200803160031
Result: (No luck)
tried ALL combo of Q to every keys.
tried ALL combo of PWR to every keys.
tried Hold reset 30 secs
tried Hold reset 30 secs with PWR button
tried Hold reset 30 secs with CAM button
200803122856
Result: (No luck)
Info: tried ALL single key with reset.
tried ALL combo of Fn to every keys.
tried ALL combo of Left soft/Right soft/Connect/Disconnect/Power button.
200803112310
Result: Got emergency mode key combo. Fn (the left lower button where you press for front row key) AND ENTER key and pin reset.
Info: tried ALL single key with reset.
in the web i find this ;
Samsung i607 Blackjack hard reset
Resetting your Phone
You can reset your phone’s settings and clear all added
data from memory.
Resetting the Phone
1. On the Home screen, press the Start soft key
2. Select Settings > More... > Security > More... >
Reset.
3. Enter the reset password and press the Done soft key.
The default password is 0000.
4. Press the Yes soft key to confirm. The phone resets and
reboots itself.
Ps. i don't have this device

Hard reset with dead LCD - doesn't seem to work?

I need to send my phone in for repair but want to factory reset it first.
LCD cracked after a drop so I can't see ANYTHING on the screen, this is what is happening when I try reset:
1. Remove & replace battery
2. Hold volume down, then press Power whilst holding
3. Four seconds later release volume down
4. Press volume down
5. Press power button (Phone then vibrates briefly)
6. Press Volume Up
7. Wait for reboot....
Problem is that the phone doesn't seem to reboot no matter how long I wait (I never hear the start-up sound/no buttons become active.)!
I have WaveSecure installed, so I did a remote Backup to check if the phone had been reset but it hadn't, I still had data on there!! I have no performed a Remote Wipe with WaveSecure but I don't know if it deletes things like Saved Passwords from the browser!
I'm running the stock HTC 2.1.
Any help is appreciated, I really need to get the hard reset working!
Thanks!
Got it working
Not sure what I did but I kept trying it over and over and when I booted the phone and tried phoning it I realised the ringtone was back to default, so I did eventually get the hard reset working!

Confirmed!! T-Mobile Concord (V768) ROOT and BOOT-LOOP fix!!

I AM NOT RESPONSIBLE FOR ANYTHING NEGATIVE THAT HAPPENS TO YOUR PHONE!!
ALSO WORKS FOR T-MOBILE DART!!
Never Hurts to Thank or GIFT to all that help you!
NO PC NEEDED!!!!!!!!:highfive:
Necessary downloads from the Play Store
SuperUser or SuperSU -- One will work, the other won't -- [/COLOR][/SIZE] --A MUST HAVE for any rooted phone! Superuser/SuperSU is the app that manages what apps on your rooted device have access to su. Apps that are granted su have elevated permissions and can modify just about any part of the system. The app consists of two parts, Superuser.apk and the su binary.
Superuser.apk runs as any other app and gives you, the user, a place to see what apps you have allowed or denied, as well as view a log of what apps have used su when.
Link2SD-- DO NOT USE until rooted.--Link2SD is an application that makes it easy for Android 1.6+ users with root privileges on their phone to move applications to the SD card.
The idea behind is same with apps2sd scripts, linking applications to SD card's second partition but differs in two ways.
One, instead of linking /data/app folder (that means moving all applications), you can select applications that you want to move.
Two, it's an application which means has a user interface. You can manage your applications with few clicks.
It also provides native apps2sd features on Android 2.2 and higher. It can move any non-protected user apps to SD card (force move), with batch moving capability.
That feature uses Android's standard SD-card installation feature and does not require a second partition. It can break some apps if they are not meant to be moved to the SD card (Such as Widgets).
BusyBox--DO NOT USE until rooted. --A MUST HAVE for any rooted phone! Almost EVERY rooted applications needs BusyBox to perform their magic, if you have a rooted phone then you NEED BusyBox.
Pro version contains Backup feature (for safer installs), uninstall feature, Advance Smart install feature, the ability to hand pick the applets you want, safety check for missing applets on start, and better overall support. The pro version will receive more frequent updates than the free version will.
Root Checker (optional)--Checks for ROOT -- Use AFTER Installing a Superuser app.
BOOT-LOOP FIX
1.) Power off the phone by removing the battery.
2.) Replace battery.
3.) Boot into recovery by holding Volume DOWN and power button until the android with the triangle appears. This will appear AFTER the android that is by himself!! (about 30 seconds)
4.) Press the home button
5.) Navigate to the 3rd choice - " wipe data/factory reset". Select by pressing the menu button
6.) Navigate to YES and select by pressing the menu button.
7.) When the wipe is complete, navigate to and select - "reboot system", again with the menu button.
ROOTING
2.3.7 BUILD V768V1.0.0B08 = NO FACTORY RESET NEEDED???Maybe
2.3.7 BUILD V768V1.0.0B19 = FACTORY RESET NEEDED???Maybe.
2.3.7 BUILD V768V1.0.0B20 = FACTORY RESET NEEDED
1.)Using your PHONE or computer - Download attached update.zip file.
2.) copy/move update.zip to root of sdcard
3.) Power off the phone
4.) reboot into recovery by holding Volume DOWN and power button until the android with the triangle appears . This will appear AFTER the android that is by himself!!(about 30 seconds)
If for some reason, you CANNOT boot into recovery try to FACTORY RESET.
5.) At this screen, Press the HOME button.
6.) scroll to your second option, navigating with the volume buttons - "Apply update from sdcard" and press the Menu key
7.) select UPDATE.ZIP to install
8.) Navigate to YES, if asked, and press the menu key.
9.) Navigate to - "reboot system now" and select by pressing the menu key.
10.) Install SuperUser. I installed SuperUser and Root Checker before installing the update.
11.) Install Busybox - Using the SMART INSTALL feature. Get it from the play store.
12.) Follow this guide - if you are going to partition an SD Card - It will show you how to partition the SD Card and install Link2SD :
Partition you SD Card To Acquire more "Internal Memory"
Congratulations!! You are now ROOTED and have more "Internal Memory"!!
Special THANKS to JCASE for his CREATION of the ZTE MERIT UPDATE.ZIP
I did the boot-loop process and then the root process. I had no errors and was rooted on the first try. You should not need to factory reset. This is only the boot- loop fix and root. No new recovery or roms.
Anyone else try this?
Liquidsmooth GSII
Hi fathertomany,
Thank You, it worked, root granted and superuser installed.
Wow, I may be only the second person in the world after you to get one rooted
So to confirm and Thank, Yes, this rooted it easy and quick, can't believe it but awesome!
Thanks!
b7
Wow 230 views and only 1 other person telling me it worked for them? I would like to keep up with this and maybe figure out some way to get roms and such, like twrp, themes, etc... But I need to know if there are any bugs or not by following these instructions. I am not a DEV but am willing to try to accomplish things people want. Currently trying to get twrp ported by someone for this phone. Whoever is willing to work on the port should pm me.
Hey I'm new to posting but I've been on android for a few years. I'm having troubles with booting into recovery mode. Whenever I try it shows some yellow text at the bottom. Something about the data directory. Think u can help me fix this please? Thank u
[Edit] My phone has been doing that since way before I downloaded the zip file. So just to clarify it has nothing to do with the file
Sent from my ZTE V768 using xda app-developers app
need help booting into recovery
fathertomany said:
I AM NOT RESPONSIBLE FOR ANYTHING NEGATIVE THAT HAPPENS TO YOUR PHONE!!
Never Hurts to Thank or Donate to all that help you!
I have boldly went where no one has gone before. After much soul searching about bricking my son's phone because I have only followed guides, I decided that this phone was so similar to the AVAIL/MERIT that I would use that method to root his Concord. I did this because his phone ran out of memory and subsequently got stuck on boot-loop. Because this worked, I wrote this tutorial.
NO PC NEEDED!!!!!!!!
This quick tutorial will help you get into recovery and root.
What files are needed are not my work! I only decided to use the ZTE MERIT GUIDE AND ZIP for my son's T-mobile Concord(V768).
To get out of the BOOT-LOOP
1.) Power off the phone by removing the battery.
2.) Replace battery.
3.) Boot into recovery by holding Volume- and power button until the android with the triangle appears. this will appear AFTER the android that is by himself!!
4.) Press the home button
5.) Navigate to the 3rd choice - " wipe data/factory reset"
6.) Select by pressing the menu button
7.) When the wipe is complete, navigate to and select - "reboot system"
To Root
1.) Download attached update.zip file
2.) copy/move update.zip to root of sdcard
3.) Power off the phone
4.) reboot into recovery by holding Volume- and power button until the android with the triangle appears.
5.) At this screen, Press the HOME button.
6.) scroll to your second option, navigating with the volume buttons - "Apply update from sdcard" and press the Menu key
7.) Navigate to YES and press the menu key (no data will be wiped but the update will be installed and you will be rooted)
8.) Navigate to - "reboot system now" and select by pressing the menu key.
9.) Install superuser or equivalent. I installed Superuser and root checker before installing the update.
If for some reason, you get an error, try to factory reset first.
Congratulations!!! You are now Rooted!!
Special THANKS to JCASE for his work on the ZTE MERIT UPDATE.ZIP mentioned above. The UPDATE.ZIP file was downloaded from Stayboogy's tutorial.
Click to expand...
Click to collapse
What carrier and version and build number are you on? You can find that under settings--> about phone. My carrier is Family Mobile (which runs on T-Mobile) and I'm running Android 2.3.7 and Build number V768V1.0.0B20.
I am having trouble getting the Concord to boot into recovery. I can't seem to get to a screen with a triangle. Can you walk through the steps to get it into recovery again or possibly post a video?
The video stayboogy supplied in the link you posted for the Avail/Merit said to put the phone into recovery mode by holding the volume up key and the menu key while pressing the power button. When I do that the concord freezes at the green android logo and does not go into recovery mode and does not boot normally. I have to pull the battery. Same thing if I hold both of the volume buttons and the menu key.
If I hold the volume down and the menu key (or just the volume down key or just the menu key) and turn on the power button I get the green android startup screen followed by a screen with a white box and an orange arrow coming out of the box pointing to a small green android. When I get to this screen pressing home or the volume up or down buttons just cause it to reboot.
bkool96 said:
Hey I'm new to posting but I've been on android for a few years. I'm having troubles with booting into recovery mode. Whenever I try it shows some yellow text at the bottom. Something about the data directory. Think u can help me fix this please? Thank u
Sent from my ZTE V768 using xda app-developers app
Click to expand...
Click to collapse
I personally have not noticed this. make sure your phone is off. make sure you press the volume down button first. while still holding the volume down button press and hold the power button. DO NOT let go of either button until the android with the triangle appears. you will see the android by himself first, CONTINUE HOLDING THE BUTTONS FOR ABOUT 30 SECONDS. When the android with the triangle appears, you can let go of both buttons. Then press your home button. this should bring up your recovery menu.
USE THE VOLUME BUTTONS TO NAVIGATE UP AND DOWN.
USE THE MENU BUTTON TO SELECT YOUR CHOICES. I
BELIEVE, THE POWER BUTTON ACTS AS THE BACK BUTTON? (MAYBE JUST USE THE BACK BUTTON.) I will check this when my son gets home from school. he is the one with the phone.
remember there is NO factory wipe necessary, unless you are trying to get out of the boot-loop.
iamhdr said:
What carrier and version and build number are you on? You can find that under settings--> about phone. My carrier is Family Mobile (which runs on T-Mobile) and I'm running Android 2.3.7 and Build number V768V1.0.0B20.
I am having trouble getting the Concord to boot into recovery. I can't seem to get to a screen with a triangle. Can you walk through the steps to get it into recovery again or possibly post a video?
The video stayboogy supplied in the link you posted for the Avail/Merit said to put the phone into recovery mode by holding the volume up key and the menu key while pressing the power button. When I do that the concord freezes at the green android logo and does not go into recovery mode and does not boot normally. I have to pull the battery. Same thing if I hold both of the volume buttons and the menu key.
If I hold the volume down and the menu key (or just the volume down key or just the menu key) and turn on the power button I get the green android startup screen followed by a screen with a white box and an orange arrow coming out of the box pointing to a small green android. When I get to this screen pressing home or the volume up or down buttons just cause it to reboot.
Click to expand...
Click to collapse
You can find most of that in the title "Confirmed!! T-Mobile Concord (V768) ROOT and BOOT-LOOP fix!!"
My Android BUILD will be posted when my son gets home. he has the phone. It should be the same. I am using the same carrier with the same version of android. Android 2.3.7
I am also on the family mobile plan.
fathertomany said:
I personally have not noticed this. make sure your phone is off. make sure you press the volume down button first. while still holding the volume down button press and hold the power button. DO NOT let go of either button until the android with the triangle appears. you will see the android by himself first, CONTINUE HOLDING THE BUTTONS FOR ABOUT 30 SECONDS. When the android with the triangle appears, you can let go of both buttons. Then press your home button. this should bring up your recovery menu.
USE THE VOLUME BUTTONS TO NAVIGATE UP AND DOWN.
USE THE MENU BUTTON TO SELECT YOUR CHOICES. I
BELIEVE, THE POWER BUTTON ACTS AS THE BACK BUTTON? (MAYBE JUST USE THE BACK BUTTON.) I will check this when my son gets home from school. he is the one with the phone.
remember there is NO factory wipe necessary, unless you are trying to get out of the boot-loop.
Click to expand...
Click to collapse
I tried again with no luck. In the Root ZTE Concord thread a few of us tried and were never able to get into recovery mode.
I just tried the steps you listed but I get the same screen with the white box and arrow and if I continue to hold the power and volume down button it causes the phone to reboot. If I keep holding down the power and volume down even after it reboots it just repeats, green android screen, white box screen, reboot, green android screen, white box, reboot, etc. I can record a video of the screen later today if you are interested.
Did you ever install an over the air update? I did months ago and I wonder if that update changes or removes how to get into recovery mode.
I have T-Mobile android 2.3.7 build number V768V1.0.0B19
Sent from my ZTE V768 using xda app-developers app
iamhdr said:
I tried again with no luck. In the Root ZTE Concord thread a few of us tried and were never able to get into recovery mode.
I just tried the steps you listed but I get the same screen with the white box and arrow and if I continue to hold the power and volume down button it causes the phone to reboot. If I keep holding down the power and volume down even after it reboots it just repeats, green android screen, white box screen, reboot, green android screen, white box, reboot, etc. I can record a video of the screen later today if you are interested.
Did you ever install an over the air update? I did months ago and I wonder if that update changes or removes how to get into recovery mode.
Click to expand...
Click to collapse
I will attempt to find this screen later when my son gets home. 3:30pm central.I have only owned the phone for about 1 1/2 months. I do not believe that I have received any update OTA or any other way. my son downloads a lot of CRAP. He eventually got stuck in the pink logo boot-loop. I proceeded to do the boot-loop fix that I listed and after the factory reset to get out of it, I confirmed that it booted normally, turned the phone off and went back into recovery.
One thing I did notice about this phone is the power button. It is "weird". I am one of those that mash the buttons EXTRA hard to insure that they are being pressed. I make sure that I use both hands, one finger on each hand for each button and I hold as still as possible. Making sure that I don't toggle any buttons. at first, my phone would some how be stuck on the green android that is by himself. What your are saying sounds similar but I never noticed the white box. I think that this might be the download mode. if you have some kind of case on the phone, try removing it.
OTA update?
bkool96 said:
I have T-Mobile android 2.3.7 build number V768V1.0.0B19
Sent from my ZTE V768 using xda app-developers app
Click to expand...
Click to collapse
Have you ever applied the over the air update? I have and I wonder if that has eliminated the ability to get into recovery mode.
I stated in my previous post that I have not noticed one. I bought the phone at the end of February. I rooted the phone the night before I posted this tutorial. I will check the build version as soon as my son gets home. FYI, The rom is totally stock as no one has had this rooted, unlocked bootloader or otherwise, that I know of.
Sent from my LIQUIDSMOOTH SGH-T989
fathertomany said:
I will attempt to find this screen later when my son gets home. 3:30pm central.I have only owned the phone for about 1 1/2 months. I do not believe that I have received any update OTA or any other way. my son downloads a lot of CRAP. He eventually got stuck in the pink logo boot-loop. I proceeded to do the boot-loop fix that I listed and after the factory reset to get out of it, I confirmed that it booted normally, turned the phone off and went back into recovery.
One thing I did notice about this phone is the power button. It is "weird". I am one of those that mash the buttons EXTRA hard to insure that they are being pressed. I make sure that I use both hands, one finger on each hand for each button and I hold as still as possible. Making sure that I don't toggle any buttons. at first, my phone would some how be stuck on the green android that is by himself. What your are saying sounds similar but I never noticed the white box. I think that this might be the download mode. if you have some kind of case on the phone, try removing it.
Click to expand...
Click to collapse
I tried again and made sure to hold the buttons firmly without moving but have the same result. Maybe your son never applied the OTA update and that's why you can get in recovery mode.
---------- Post added at 01:15 PM ---------- Previous post was at 01:12 PM ----------
fathertomany said:
I stated in my previous post that I have not noticed one. I bought the phone at the end of February. I rooted the phone the night before I posted this tutorial. I will check the build version as soon as my son gets home. FYI, The rom is totally stock as no one has had this rooted, unlocked bootloader or otherwise, that I know of.
Sent from my LIQUIDSMOOTH SGH-T989
Click to expand...
Click to collapse
I was just wondering if the OTA update was applied by bkool96 and maybe that's why we both can't get recovery mode to boot.
If you are willing to back up what you can and then do a factory restore. You might have luck that way. I will try to get into recovery later today since my son has been using the phone but I may still be able to seeing as how I am already rooted.
Sent from my LIQUIDSMOOTH SGH-T989
Also, googling it, I noticed that I may be A** backwards. Meaning, Try Volume UP and the power button. If that works then I will edit the tutorial.
Sent from my LIQUIDSMOOTH SGH-T989
fathertomany said:
Also, googling it, I noticed that I may be A** backwards. Meaning, Try Volume UP and the power button. If that works then I will edit the tutorial.
Sent from my LIQUIDSMOOTH SGH-T989
Click to expand...
Click to collapse
I'm pretty sure its volume down+power button. Im stuck at the green android with volume up and I get into recovery with volume down for like 3 seconds then it reboots with a yellow error message mentioning something about the /data directory
Sent from my ZTE V768 using xda app-developers app
When you press the volume up and power buttons, DO NOT let them go until the Android with the triangle appears. Then follow the rest of the guide. I remember getting frozen at the green Android by himself.:banghead:
Sent from my LIQUIDSMOOTH SGH-T989
fathertomany said:
When you press the volume up and power buttons, DO NOT let them go until the Android with the triangle appears. Then follow the rest of the guide. I remember getting frozen at the green Android by himself.:banghead:
Sent from my LIQUIDSMOOTH SGH-T989
Click to expand...
Click to collapse
I tried it again and its still a no go. Maybe its my phones build number that the recovery mode doesn't like?
Sent from my ZTE V768 using xda app-developers app
---------- Post added at 01:32 PM ---------- Previous post was at 01:25 PM ----------
iamhdr said:
Have you ever applied the over the air update? I have and I wonder if that has eliminated the ability to get into recovery mode.
Click to expand...
Click to collapse
I updated back at the end of December which fixed problems I had with mounting the USB storage on my Mac
Sent from my ZTE V768 using xda app-developers app

Phone can not boot after updating ASUS UI UPDATE

Phone : 550ML
Yesterday (2015/12/21, India Time) i got notification about ASUS UI update, I downloaded the updates and press install button, then system automatically got shutdown and not restarted.
Right now when i click on Power button, it shows only battery charging ICON.
I checked the support on http://www.asus.com/support/FAQ/1006346. But dont know how i can solve it. I also checked this forum http://forum.xda-developers.com/zenfone2/help/phone-wont-boot-update-t3126603
please help me to sort out this issue
Thanks
Harry
Hi dude,
If you push on start button for a long time, do you have any vibration ? If not, did you try to start in recovery mode again (start button and volume up ?).

Lg g3 bootloop finally got fixed !

found a very simple yet damn effective way to get out of numbing LG G3 D855 bootlooping loops ! but guys in the process i seem to have forgotten a few steps...shi* ! but dont worry yet. it should come right up....its there. just let me freshen up before tracing back those vital moves that i reluctantly made on(lets see whether it works fine and if not...? mode !)......and voila...it worked magic...! what i now regret is the screen rec. had i been hit with the idea even before getting in there in the first place !
Ok where is the method?
?????????????????????????????????????????????????
OK here it is : first reboot into recovery Twrp( by holding down both Power+Vol-Down buttons while device on power-off state ! that brings up usual LG Logo screen..the minute it appears just let go of the buttons at the same time.. simultaneously strike back and hold them down again. of course this lets us enter into Twrp Recovery Mode. Now... first off, hit the Factory Reset button. as soon as its done with go ahead and hit the Restore button next... it pulls up the screen that says: select Package to Restore... get that package below checked. on the next make sure all these system/data/boot are checked as well. no need to enable MDS verification at the bottom...Swipe what it says swipe to..... ! finally...that unforgetable sxcy 'reboot into system' Lo and behold..........! *
ehhbi said:
OK here it is : first reboot into recovery Twrp( by holding down both Power+Vol-Down buttons while device on power-off state ! that brings up usual LG Logo screen..the minute it appears just let go of the buttons at the same time.. simultaneously strike back and hold them down again. of course this lets us enter into Twrp Recovery Mode. Now... first off, hit the Factory Reset button. as soon as its done with go ahead and hit the Restore button next... it pulls up the screen that says: select Package to Restore... get that package below checked. on the next make sure all these system/data/boot are checked as well. no need to enable MDS verification at the bottom...Swipe what it says swipe to..... ! finally...that unforgetable sxcy 'reboot into system' Lo and behold..........! *
Click to expand...
Click to collapse
Hahaha its a simple restore of ur backup ....everyone knows this no big deal
Mods kindly look into such posts.no need of them.
Dude, seriously? I have to treat my phone like cancerous tumor about to burst because god knows what triggers that reboot, trawling all over the web if somebody found a solution and then this shows up.
Threads not very contributive and is misleading. Closed.

Categories

Resources