Develop Bugs

Missing storage after "manually" updating to android 5.1 - [SOLVED]

Hi, I recently installed official android 5.1 from factory source but now I have issues "missing" storage.
32GB Nexus 7 2013 (Wifi)
TOTAL: 26,9 GB
Used: 17,3GB
Free: 9,6GB
Theese numbers are not supposed to be what they are right out of the box with barely no apps installed and nothing else stored. I am supposed to have much more free space.
I followed this guide to install every .img file manually that was included in the official factory images.
Install instructions followed:
Flash bootloader and radio (radio does not appear on all devices, if it's not in your tgz, you don't need it)
fastboot flash bootloader <bootloader file name here>.img
fastboot flash radio <radio file name here>.img
After flashing the bootloader/radio, you need to reboot the bootloader as shown below, don't skip this step!
fastboot reboot-bootloader
Now you can move on to the rest of the files
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash system system.img
NEXUS 9 ONLY - flash this as well
fastboot flash vendor vendor.img
If you want to wipe cache and user data (full wipe), flash these
fastboot flash cache cache.img
fastboot flash userdata userdata.img
Finally, just reboot your device, and Android should start up.
fastboot reboot
The reason that I "manually" flashed every .img file is because I got errors when using the flash-all.bat file
archive does not contain 'boot.sig'
archive does not contain 'recovery.sig'
failed to allocate 842365088 bytes
error: update package missing system.img
Thanks in advance for help!
EDIT:
Confirmed: factory reset/data wipe in stock recovery solved the storage problem

Try formatting data with twrp. That fixed the no storage problem I had a while ago.

yosmokinman said:
Try formatting data with twrp. That fixed the no storage problem I had a while ago.
Click to expand...
Click to collapse
I haven't installed TWRP yet, do you know if it supports 5.1? Any chance that the stock recovery can do the same?

You could try a factory reset/data wipe in stock recovery. Latest twrp works fine.

yosmokinman said:
You could try a factory reset/data wipe in stock recovery. Latest twrp works fine.
Click to expand...
Click to collapse
Confirmed: factory reset/data wipe in stock recovery solved the storage problem
Thank you very much

my nexus 32gb is showing like 26.5gb after the update for 5.1 this is normal value? 6gb is consumed by the OS or something?
my device is fullwiped

Flashing from MM to N system images via fastboot stuck at google logo

All,
I am not a noob by any means, but when I attempted to manually flash the img files via fastboot for the latest N build from the factory images coming from the last 6.0.1 build I get stuck on the Google logo. I checked the commands and re-flashed again and the same result happened ( i did flash radios and BL ) .
I even tried to format data ( i had backed everything up ) , still no go and stuck at google logo still. I could access BL and able to access TWRP.
I got frustrated and flashed the 6.0.1 images including BL and radio via fastboot and booted up just fine. I then rooted, installed flashfire and used the OTA and Android N installed just fine.
Does anyone have any idea what could be causing this. I am currently on N, but wanted to do a clean install .
Thanks in Advance

Did you flash vendor.img?
Why don't you list the exact commands you used to flash, then people can comment.

fastboot flash system system.img
fastboot flash vendor vendor.img
fastboot flash boot boot.img
fastboot erase cache
fastboot flash cache cache.img
fastboot flash recovery twrp-3.0.2-2-bullhead.img
fastboot reboot-bootloader
fastboot flash recovery twrp-3.0.2-2-bullhead.img
Flashing mtc20k works successfully
Using the same commands to flashing npf10c results in stuck the google logo
In order for me to even get on N I have to me on 6.0.1 then either use the bullhead-ota-npf10c-d1785fea.zip on the root of the SD card and use flashfire OR use the following command from stock recovery
adb sideload bullhead-ota-npf10c-d1785fea.zip
The later is what I did recently, but both will work to get to N.
So why can I not simply flash the factory images like for 6.0.1?

carm01 said:
fastboot flash system system.img
fastboot flash vendor vendor.img
fastboot flash boot boot.img
fastboot erase cache
fastboot flash cache cache.img
fastboot flash recovery twrp-3.0.2-2-bullhead.img
fastboot reboot-bootloader
fastboot flash recovery twrp-3.0.2-2-bullhead.img
Flashing mtc20k works successfully
Using the same commands to flashing npf10c results in stuck the google logo
In order for me to even get on N I have to me on 6.0.1 then either use the bullhead-ota-npf10c-d1785fea.zip on the root of the SD card and use flashfire OR use the following command from stock recovery
adb sideload bullhead-ota-npf10c-d1785fea.zip
The later is what I did recently, but both will work to get to N.
So why can I not simply flash the factory images like for 6.0.1?
Click to expand...
Click to collapse
What happens when you flash a Nougat factory image that is NOT a developer preview? Try flashing NRD91N from here:
https://developers.google.com/android/images?hl=en
Sent from my Nexus 5X using Tapatalk

carm01 said:
fastboot flash system system.img
fastboot flash vendor vendor.img
fastboot flash boot boot.img
fastboot erase cache
fastboot flash cache cache.img
fastboot flash recovery twrp-3.0.2-2-bullhead.img
fastboot reboot-bootloader
fastboot flash recovery twrp-3.0.2-2-bullhead.img
Flashing mtc20k works successfully
Using the same commands to flashing npf10c results in stuck the google logo
In order for me to even get on N I have to me on 6.0.1 then either use the bullhead-ota-npf10c-d1785fea.zip on the root of the SD card and use flashfire OR use the following command from stock recovery
adb sideload bullhead-ota-npf10c-d1785fea.zip
The later is what I did recently, but both will work to get to N.
So why can I not simply flash the factory images like for 6.0.1?
Click to expand...
Click to collapse
I don't usually flash cache or user.
Try this instead and see if it works.
Instead of flashing cache.img
fastboot erase cache
fastboot format cache
(if you want to reset user)
fastboot erase userdata
fastboot format userdata

sfhub said:
I don't usually flash cache or user.
Try this instead and see if it works.
Instead of flashing cache.img
fastboot erase cache
fastboot format cache
(if you want to reset user)
fastboot erase userdata
fastboot format userdata
Click to expand...
Click to collapse
SlimSnoopOS said:
What happens when you flash a Nougat factory image that is NOT a developer preview? Try flashing NRD91N from here:
https://developers.google.com/android/images?hl=en
Sent from my Nexus 5X using Tapatalk
Click to expand...
Click to collapse
I have tried fastboot erase userdata and fastboot format userdata and fastboot erase cache
fastboot format cache and that never worked.
I tried that factory image before and resulted in the same, however, I will at sometime attempt to do the final of 7.1.1 once it is available sometime in December 2016 and hopefully will resolve the issue.
I will stay on DP1 right now as i find the battery extremely excellent, the Visual VM is back now, and i notice some notifications are coming through better than in 7.0. (I read an article earlier today about notifications and the pixel not coming through)
Thanks in Advance for the people that did come through so far and wanted to thank you for your input on the matter and if i don't have a pixel by December I will try this out.

P2 (UK) on 3 - Going from 3 to stock rom

Hello all,
I'm a bit confused about the process of taking my current '3' ROM and changing it to the official Lenovo Rom.
I have downloaded the lenovo drivers (installed and ok) phone is in debug mode.
I have downloaded the stock rom from here: https://forum.xda-developers.com/lenovo-p2/development/7-0-lenovo-p2a42-stock-nougat-update-t3581517 and have adb / fastboot.
I know I have to use the volume rocker and powerbutton to get into the boot mode but I don't know the commands for adb or fastboot. I have changed the name of the rom to 'update'
Can someone please advise me on the commands I am meant to enter to get this onto my phone please?
Thanks in advance,
Cue

Copy all the code below, paste it to a new text file on your PC and save it as All Files instead of .txt and name it a fastboot.bat. Place the fastboot.bat in the adb/fastboot directory, also place the unpacked rom in the same path. Run it as admin. Profit.
Code:
fastboot flash partition gpt_both0.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash system systemchunk0.img
fastboot flash system systemchunk1.img
fastboot flash system systemchunk2.img
fastboot flash system systemchunk3.img
fastboot flash system systemchunk4.img
fastboot flash system systemchunk5.img
fastboot flash system systemchunk6.img
fastboot flash system systemchunk7.img
fastboot flash system systemchunk8.img
fastboot flash system systemchunk9.img
fastboot flash system systemchunk10.img
fastboot flash system systemchunk11.img
fastboot flash system systemchunk12.img
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo pause

Hi, op here.
Firstly, thank you for responding! Your instructions seem very clear. When i had a look at the contents of the ROM (in zip) i couldn't see any of the systemchunk files you mention, are they hidden deep somewhere?
Regards,
Cue.

If your phone is stock the Rom can be updated without fastboot or a PC.
All the instructions are in that thread.

Huh. Surely just boot into recovery and install the update.zip? No need to have it connected to pc.

Hello all,
Yep. I un-encrypted the sd card copied the zip onto it and booted up that way. Very easy. Now running stock directly from Lenovo which I am very happy about! It also pushed the new 78mb update as well.
Thank you for all your input.

same way i did it too theirs no need to do it through fastboot method just like the other people i did it through the built in recovery by renaming the Nougat rom to update.zip works fine and you will get another update ota straight after t obring it right up to date.

Sounds like you guys have this sorted :highfive:
Just for completeness, can somebody upload the original 3 rom? It just helps out the person who thinks they have a hardware issue and may need to return the phone to 3.
If you try and return your phone and it doesn't have the original 3 rom, your chances of a good outcome are obviously less as you have tampered with the phone etc.

The warranty is with Lenovo Not three.
Doubt there'd be an issue as the bootloader will still be locked and it's an official Lenovo Firmware.
Since flashing nougat and a factory wipe my VOLTE is now working.

I did the same flashed nougat and volte is working but only shows up some times not as much as I'd like is their any way to get volte to work more often. In my bedroom where the signal is weak I don't get the volte symbol at all.

philje123 said:
The warranty is with Lenovo Not three.
Doubt there'd be an issue as the bootloader will still be locked and it's an official Lenovo Firmware.
Since flashing nougat and a factory wipe my VOLTE is now working.
Click to expand...
Click to collapse
How you enabled VoLte on nougat? You are on stock rom or branded?

I'm on stock unbranded.
VOLTE settings now show up in phone menu and it just works. I had to factory reset though as initially it didn't work after flashing nougat.

Help restoring to stock image, after trying to install copperhead os

Hi all,
I'm sorry to ask this question, but I'm really struggling to get my Nexus 5X to boot into stock rom. The install seems to go ok, but there was error when flashing.. See below...
archive does not contain 'boot.sig'
archive does not contain 'dtbo.img'
archive does not contain 'dt.img'
The phone now boots to the google boot logo, then loops back to either the "Unlocked Bootloader" or the Custom OS message. (depending on the locked state of the bootloader)
I cannot get into recovery, as the phone just loops back as described above when selecting it from the bootloader option.
Can anyone advise me on how to restore the phone back to stock os. I've tried flashing version 7.1.2 8.0.0 and 8.1.0, using either the flash-all.bat or manually typing the commands. I'm 110% sure this is not to do with over heating on CPU/RAM, I have another nexus 5x that has the bootloop of death and it's bootloop is very different from what I'm seeing on this Nexus 5x.
Thanks in advance

First, the .sig errors are normal so you can ignore those. I would make sure your booloader is unlocked then manually flash the bootloader.img. Then boot back into the bootloader. Then manually flash the remainder of the partitions. Use the 8.1.0 os.
Sent from my [device_name] using XDA-Developers Legacy app

Ok here's what I've done.
1) Downloaded bullhead-opm2.171019.029.zip from Google factory images.
2) Extracted the zip to a folder and extracted image-bullhead-opm2.171019.029.zip to the same folder to get the boot.img | system.img | vendor.img and recovery.img file. (there was no userdata.img nor cache.img within the zip, so I downloaded 7.1.1 version and extracted those files too)
3) Using SDK tools ADB /Fastboot version 1.0.38, I flashed the following:-
fastboot flash bootloader C:\bullhead\images\bootloader-bullhead-bullhead-xx.xx.img
fastboot reboot-bootloader
fastboot flash radio C:\bullhead\images\radio-bullhead-bullhead-xx.xx.img
fastboot reboot-bootloader
fastboot flash boot C:\bullhead\images\boot.img
fastboot erase cache
fastboot flash cache C:\bullhead\images\cache.img
fastboot flash recovery C:\bullhead\images\recovery.img
fastboot flash system C:\bullhead\images\system.img
fastboot flash vendor C:\bullhead\images\vendor.img
fastboot flash userdata C:\bullhead\images\userdata.img
fastboot oem lock
Everything flashed without a problem, no error. However the phone still does not boot into the OS nor can I get it to boot into recovery mode.
I cannot understand what I am doing wrong. I think it has something to do with the installation of copperhead I tried. Does anyone know whether copperhead os restricts going back to stock rom due to its additional security features?
I'm stuck!!!
Thanks in advance.

pinkstink said:
Ok here's what I've done.
1) Downloaded bullhead-opm2.171019.029.zip from Google factory images.
2) Extracted the zip to a folder and extracted image-bullhead-opm2.171019.029.zip to the same folder to get the boot.img | system.img | vendor.img and recovery.img file. (there was no userdata.img nor cache.img within the zip, so I downloaded 7.1.1 version and extracted those files too)
3) Using SDK tools ADB /Fastboot version 1.0.38, I flashed the following:-
fastboot flash bootloader C:\bullhead\images\bootloader-bullhead-bullhead-xx.xx.img
fastboot reboot-bootloader
fastboot flash radio C:\bullhead\images\radio-bullhead-bullhead-xx.xx.img
fastboot reboot-bootloader
fastboot flash boot C:\bullhead\images\boot.img
fastboot erase cache
fastboot flash cache C:\bullhead\images\cache.img
fastboot flash recovery C:\bullhead\images\recovery.img
fastboot flash system C:\bullhead\images\system.img
fastboot flash vendor C:\bullhead\images\vendor.img
fastboot flash userdata C:\bullhead\images\userdata.img
fastboot oem lock
Everything flashed without a problem, no error. However the phone still does not boot into the OS nor can I get it to boot into recovery mode.
I cannot understand what I am doing wrong. I think it has something to do with the installation of copperhead I tried. Does anyone know whether copperhead os restricts going back to stock rom due to its additional security features?
I'm stuck!!!
Thanks in advance.
Click to expand...
Click to collapse
Why don't you use the "flash-all.bat" file? I'm pretty sure you're not wiping your system partition in the process you use.

i.adrian said:
Why don't you use the "flash-all.bat" file? I'm pretty sure you're not wiping your system partition in the process you use.
Click to expand...
Click to collapse
Hiya,
I have also tried using the .bat script, it leads to the same place. A phone that does not boot.
thanks in advance.

Can you boot into twrp, fastboot boot twrp.img? If you can try formatting, not wiping, the data partition. It also gives you the option to repairing some other partitions, I don't remember which ones. You could try that.
Sent from my [device_name] using XDA-Developers Legacy app

Pixel XL Bootloop

Hello Everyone,
My Pixel XL is going in bootloop after working for sometime. I have to factory reset it via recovery to get it working again. I am attching log which i got via ADB when it boot up. Can somebody help me with that?
No root no unlocked bootloader.

rkravi85 said:
Hello Everyone,
My Pixel XL is going in bootloop after working for sometime. I have to factory reset it via recovery to get it working again. I am attching log which i got via ADB when it boot up. Can somebody help me with that?
No root no unlocked bootloader.
Click to expand...
Click to collapse
No log

Sorry My Bad @Homeboy76

Have you tried these steps below?
If you have modified a little the stock android (hosts file, root, kernel, etc.), you may experience a fail in OTA update;
If you have a bootloop/soft brick/not sure of the state of your android system;
This WILL NOT delete your data and apps. This will remove your custom kernel/root/hosts/recovery through (which is a good thing because it will be clean then).
1) Download your system image for Marlin (Pixel XL) on google website.
download the latest version
2) Unzip the file marlin-nde63v-factory-______.zip
3) Unzip inside the new directory (marlin-nde63v) the image-marlin-_____.zip
Execute fastboot commands (assuming the bin is on your PATH)
Code:
fastboot reboot-bootloader
fastboot flash radio radio-marlin-*.img
fastboot reboot-bootloader
fastboot flash boot_a boot.img
fastboot flash boot_b boot.img
fastboot flash system system.img
fastboot flash system_b system_other.img
fastboot flash vendor vendor.img
fastboot flash modem modem.img
fastboot reboot
to add TWRP;
fastboot boot /path/to/twrp.img
then In TWRP, install twrp.zip for permanent twrp. Goodluck!