Hi guys,
Since today Huawei delivers the open sourcecode for the drivers, I guess.
Anyone in here capable to create a nice clean AOSP ROM or anything else good for our tablet?
Search link for LTE version:
http://m.huawei.com/enmobile/consum...roid=M2-A01L&proKey=Tablets_T/Tablets/M2-A01L
Direct download for LTE version:
http://download-c.huawei.com/downlo...oadId=89345&version=347349&siteCode=worldwide
Search link for WiFi version:
http://m.huawei.com/enmobile/consum...roid=M2-A01w&proKey=Tablets_T/Tablets/M2-A01w
Direct download for WiFi version:
http://download-c.huawei.com/downlo...oadId=89346&version=347353&siteCode=worldwide
I do not have the experience with ROM building, forking, ... etc. here.
One good room would be good.
Edit. Nevermind
Anyone with the LTE version of this can you upload to a cloud link so that I can download? I would rather not waste my time having to send an email to [email protected] just to get it. Thanks
Huawei Open Source Released
Hey,
maybe it is late, i have found the open source.
the link: consumer.huawei.com/en/opensource/
and we can find m2-a01l in the tablet part, and it is on page 4.
Emm...i dont know how many people use this tablet because it is out of date.:laugh:
and i dont know if it is everything we want
whatareyou007 said:
Huawei Open Source Released
Hey,
maybe it is late, i have found the open source.
the link: consumer.huawei.com/en/opensource/
and we can find m2-a01l in the tablet part, and it is on page 4.
Emm...i dont know how many people use this tablet because it is out of date.:laugh:
and i dont know if it is everything we want
Click to expand...
Click to collapse
Hi! Thank you, i'll do an AOSP for our poor tablet, the only problem in my case, I'm unable to unlock the bootloader because i haven't in dev options "OEM unlock". If I'll pass this issue, I'll immediately start to develop the ROM.
Crypto18 said:
Hi! Thank you, i'll do an AOSP for our poor tablet, the only problem in my case, I'm unable to unlock the bootloader because i haven't in dev options "OEM unlock". If I'll pass this issue, I'll immediately start to develop the ROM.
Click to expand...
Click to collapse
Hi! Have you able to develop for our poor table? 1 stable ROM should be enough
and0ng said:
Hi! Have you able to develop for our poor table? 1 stable ROM should be enough
Click to expand...
Click to collapse
The only problem in this moment still remain unlocking bootloader. I'm searching solutions
Crypto18 said:
The only problem in this moment still remain unlocking bootloader. I'm searching solutions
Click to expand...
Click to collapse
Yeah it's a pain to unlock the bootloader. But since I need to install Google Workspace device policy I have no other option
@Crypto18 - There is a possibilty to unlock the bootloader by using dc-unlocker - amount about 4 Euro. I had success in doing so a year ago. It would be very nice to get an AOSP-ROM für the tablet.
I think, I unlocked it with dc-unlocker, too, four years ago or so.
I would be happy to have any clean/empty/fresh AOSP ROM for this tablet, as up to today it is still fast and really usable.
If you need any help, I would also be eager to learn how to do it (building a ROM). @Crypto18
Crypto18 said:
Hi! Thank you, i'll do an AOSP for our poor tablet, the only problem in my case, I'm unable to unlock the bootloader because i haven't in dev options "OEM unlock". If I'll pass this issue, I'll immediately start to develop the ROM.
Click to expand...
Click to collapse
I did the DC-unlocker thing today as described in the sticky, so it still works. Somebody in this thread mentioned that it worked for him without the OEM unlock option (it disappeared in EMUI 4), but to be on the safe side I had done a downgrade to EMUI 3 before (the oldest one I found didn't have a working dialer, I didn't try the landscape calculator trick to activate the manufacturere mode, but updated to a later EMUI 3 version that had a a working dialer: "Huawei MediaPad M2-801L Android 5.1.1 EMUI 3.1 B007.zip").
I am now looking for a working TWRP (see my post in the sticky thread a few minutes ago).
If you manage to unlock your bootloader, I would be willing to go the "build your own version from scratch" way with you. I have experience as embedded Linux developer one decade ago, but never did it for Android. Would be more fun to have a second person interested in this "classic" tablet.
@coocooc , @Crypto18 ,
Have you made any progress with developing a custom rom?
@coocooc - Please search for "TWRP-3.1.0-recovery-MediaPadM2-10.0-LISZT-A01L-A01W.img" in TWRP. That's the TWRP you're looking for.
rotter99 said:
@coocooc , @Crypto18 ,
Have you made any progress with developing a custom rom?
Click to expand...
Click to collapse
Crypto18 so far did not come back, and I didn't start the journey yet.
I am on the way to prepare a Linux laptop for building Android and SBC stuff, but family life does not allow to spend many hours on my pet projects.
I wrote a mail to Huawei to get the latest sources (EMUI 4), but the first level support shown on their GPL site couldn't fulfill the wish. They gave me a developer address to apply to; let's see how this ends.
gelrav said:
@coocooc - Please search for "TWRP-3.1.0-recovery-MediaPadM2-10.0-LISZT-A01L-A01W.img" in TWRP. That's the TWRP you're looking for.
Click to expand...
Click to collapse
Thanks for the hint! I will try this TWRP version tonight. Which EMUI version are you using with this TWRP (EMUI 3 or 4)? Is there something to check in the flash layout first, to succeed with this TWRP?
@coocooc - I'm using a Huawei Mediapad M2 10.W with Emui 3.1., Android 5.1.1.
If you're on Mediapad 801L, the above mentioned TWRP will not work for you!
I am using “TWRP-3.1.0-recovery-MediaPadM2-10.0-LISZT-A01L-A01W.img“ om my M2-A01W and it working without any problems.
gelrav said:
@coocooc - I'm using a Huawei Mediapad M2 10.W with Emui 3.1., Android 5.1.1.
If you're on Mediapad 801L, the above mentioned TWRP will not work for you!
Click to expand...
Click to collapse
@gelrav Oh that might be the reason for my problems as I do use the 801L version. What alternative TWRP ist available then?
coocooc said:
@gelrav Oh that might be the reason for my problems as I do use the 801L version. What alternative TWRP ist available then?
Click to expand...
Click to collapse
Funny, the name of the TWRP file suggests that it is valid for both the L and the W versions of the M2-A01.
What is exactly the problem with this file?
I unlocked both the phone und FRP on my device before installing this file.
I am on EMUI 3.1. and Android 5.1.1.
@coocooc
Maybe this link can help you getting further:
Downloads for : Huawei -All-General-Generic- | AndroidFileHost.com | Download GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers.
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Related
Would be very grateful for a link for Lenovo A7600 Rom for Lollipop O/S. A link other than that posted in 3 parts on a spam site.
Thanks
leemg said:
Would be very grateful for a link for Lenovo A7600 Rom for Lollipop O/S. A link other than that posted in 3 parts on a spam site.
Thanks
Click to expand...
Click to collapse
Ive just picked up one of these tablets and managed to root it and install custom revcovery.
To be honest I think there are zero custom ROM for this device and the supposed Lollipop ROM on those spam sites are bound to be a load of virus. I have seem three or four such 3 part download sites all of which are hidden behind a survey. All the comments on the sites are exactly the same but are posted by different people depending what site you look at which indicates they can't be trusted.
I have tweeted Lenovo to see if they plan a Lollipop update but no reply yet.
I think we need to either need to learn how to port or find a dev that can do it
Eddster3000 said:
Ive just picked up one of these tablets and managed to root it and install custom revcovery.
To be honest I think there are zero custom ROM for this device and the supposed Lollipop ROM on those spam sites are bound to be a load of virus. I have seem three or four such 3 part download sites all of which are hidden behind a survey. All the comments on the sites are exactly the same but are posted by different people depending what site you look at which indicates they can't be trusted.
I have tweeted Lenovo to see if they plan a Lollipop update but no reply yet.
I think we need to either need to learn how to port or find a dev that can do it
Click to expand...
Click to collapse
Really nice to see your response, would you be kind enough to inbox me with your custom recovery. I really need to even get the stock rom to reflash if you could help. Thanks so much for replying and if we can get someone interested in porting to LP i would happy to contribute.
leemg said:
Really nice to see your response, would you be kind enough to inbox me with your custom recovery. I really need to even get the stock rom to reflash if you could help. Thanks so much for replying and if we can get someone interested in porting to LP i would happy to contribute.
Click to expand...
Click to collapse
I used the guide at this link and the download for the covery is halfway through the walkthrough
http://aleatorical.blogspot.co.uk/2014/11/installing-clockworkmod-and-root-for.html
Its pretty long winded but it worked for me. As you will be using your own device its at your own risk if you decide to use the link
Cheers
Edd
Eddster3000 said:
I used the guide at this link and the download for the covery is halfway through the walkthrough
http://aleatorical.blogspot.co.uk/2014/11/installing-clockworkmod-and-root-for.html
Edd
Click to expand...
Click to collapse
I'll take a look, thanks
hi guys,
could you install successfully the lollipop on lenovo a7600?
andredemello said:
hi guys,
could you install successfully the lollipop on lenovo a7600?
Click to expand...
Click to collapse
There isn't a Lollipop ROM yet for A7600f. It is possible to root and get custom recovery installed but as far as I can tell there is no official lollipop update or custom ROM development at all
Legit?
Eddster3000 said:
There isn't a Lollipop ROM yet for A7600f. It is possible to root and get custom recovery installed but as far as I can tell there is no official lollipop update or custom ROM development at all
Click to expand...
Click to collapse
i found this one today
chinagadgetsreviews .com/download-android-lollipop-5-0-stock-firmware-for-lenovo-s8-a7600-smartphone.html
Is it legit?
how to check?
I have A7600... i want to change to China based rom for global...
cheers
knoblybits said:
i found this one today
chinagadgetsreviews .com/download-android-lollipop-5-0-stock-firmware-for-lenovo-s8-a7600-smartphone.html
Is it legit?
how to check?
I have A7600... i want to change to China based rom for global...
cheers
Click to expand...
Click to collapse
I checked the link and it is for the S8 smartphone which also as model number A7600. If you have that smartphone you test it at your own risk but if you are talking about a rom for A7600F tablet it won't be compatible.
As Lenovo don't seem to be official updating the A7600F tablet im guessing we need a custom rom. Unfortunately I don't think it's that popular a tablet so won't pull in developers and regrettably I'm not skilled enough to even know where to start.
Eddster3000 said:
I checked the link and it is for the S8 smartphone which also as model number A7600. If you have that smartphone you test it at your own risk but if you are talking about a rom for A7600F tablet it won't be compatible.
As Lenovo don't seem to be official updating the A7600F tablet im guessing we need a custom rom. Unfortunately I don't think it's that popular a tablet so won't pull in developers and regrettably I'm not skilled enough to even know where to start.
Click to expand...
Click to collapse
I received the s8 a7600 with android 5.0 - it looks like that OS is just installed by seller, with multiple application that are a huge adware/spam generators. I tried to remove all (root/remove apps), but it destroys a little the functionality (dialer has opacity - not so easy to find what is going on, camera not working at all). But generally works. If anyone has skills - I am sure it can be easy fixed (for example install 3rdparty dialer - but that one from lenovo is pretty fine). But I think I will update phone with stock ROM, but I need to find how to do that safely and be sure I can back to the actual software...
Eddster3000 said:
I used the guide at this link and the download for the covery is halfway through the walkthrough
http://aleatorical.blogspot.co.uk/2014/11/installing-clockworkmod-and-root-for.html
Its pretty long winded but it worked for me. As you will be using your own device its at your own risk if you decide to use the link
Cheers
Edd
Click to expand...
Click to collapse
A bit of a necro here ...
Yep, it is a long-winded guide. I wrote everything as best I could just in case.
I'd be surprised if more than 5 people are still looking to root this device. But for those folks, I updated the guide tonight.
I hadn't used the tablet much until this past week, my phone was doing better and I was only using the tablet for streaming videos as a portable TV. However my phone died and I finally got around to re-rooting the tablet (I has lost root after applying an OTA update about a year ago).
And no, there are not any custom ROMs ... no Lollipop ... no Marshmallow ... never Nougat ... for this tablet. This guide is PURELY for getting root on 4.4.
That said, here is the short version ... this MAY work on a never-rooted A10 A7600F ... it may only work to REFRESH the root. I have no good way of knowing as there isn't a chance in hell I'm going to revert everything to stock to find out
Glad to know at least 10 people got help from the guide.
UPDATE 9/22/2016:
Revised Steps are simple:
* Download Kingo Root (not King Root, that failed) APK version for Android.
* Run Kingo Root.
* If it fails, reboot, and try again (mine failed the first time)
* Assuming Kingo Root worked the second time (if not, see the original detailed steps below) ... DON'T REBOOT yet (when I did this, the root disappeared, so I had to run Kingo Root a 3rd time)
* Install a Root Checker and verify root access
* Install (first time) or uninstall and re-install (updating is fine if yours was out of date) SuperSU by Chainfire (other SuperSU may or may not work, Chainfire worked for me)
REBOOT
* Re-run Root Checker to verify root access (don't run Kingo Root before this) ... it should be using SuperSU to grant root, NOT Kingo
* If rooted, uninstall Kingo Root
* REBOOT
* Re-run Root Checker to make sure SuperSU continued to work after removing Kingo Root.
---------- Post added at 06:38 AM ---------- Previous post was at 06:37 AM ----------
aleextra said:
I received the s8 a7600 with android 5.0
Click to expand...
Click to collapse
There are multiple "A7600" devices out there. This is specifically for the A7600F, aka the A10. Different device, ROMs not compatible with other A7600 devices. Lenovo can burn in hell both for their lack of updates as well as their naming conventions.
Hi all,
I have ported a CM13 ROM to this device to bring us to Android 6.0.1. if anyone is interested I will start a thread for and provide instructions and a link later today.
thel2dab said:
Hi all,
I have ported a CM13 ROM to this device to bring us to Android 6.0.1. if anyone is interested I will start a thread for and provide instructions and a link later today.
Click to expand...
Click to collapse
Absolutely of interest. Looking forward to information.
ProsjektX said:
Absolutely of interest. Looking forward to information.
Click to expand...
Click to collapse
I have started a thread for it here;
A7600-F Port
Give it a try and let me know how you get on.
Regards
Lee
I used it.. 2 years ago till now.. ?
Stock ROM Elephone P90000_Android_6.0_20160401 (Beta)
Download - https://mega.nz/#!w4BBnKaR!_WU3BeucmEURhgo8VpvspHMVZngL7ctzd29mx6cn2BQ
XDA:DevDB Information
[ROM] Stock ROM Elephone P9000_Android_6.0_20160401_Beta, ROM for the Elephone P9000
Contributors
Jonny
ROM OS Version: 6.0.x Marshmallow
Based On: AOSP
Version Information
Status: Beta
Current Beta Version: 20160401
Beta Release Date: 2016-04-04
Created 2016-04-19
Last Updated 2016-04-19
Has someone give this Beta a try?
Trying now, just be aware that flashing WILL completely wipe your phone again... Everything is gone...
Seriously though, how hard is it to NOT wipe everything like, oh i don't know, every other phone out there...
There is not much difference between this and the last OTA update, I have found the fingerprint sensor a little better but even the security patch level says 1 March 2016... Can't say anything about battery life yet, I find it usually takes 3 days for that to settle but I really haven't seen much difference in UI or settings. Most changes must be "under the hood" so to speak... Doesn't help there's no changelog...
Found the case doesn't seem to register being closed easily so it just leaves the phone on even though I have the original case that has the screen cutout for clock and whatnot.
Keyboard still doesn't support swype...
ultramag69 said:
Trying now, just be aware that flashing WILL completely wipe your phone again... Everything is gone...
Seriously though, how hard is it to NOT wipe everything like, oh i don't know, every other phone out there...
There is not much difference between this and the last OTA update, I have found the fingerprint sensor a little better but even the security patch level says 1 March 2016... Can't say anything about battery life yet, I find it usually takes 3 days for that to settle but I really haven't seen much difference in UI or settings. Most changes must be "under the hood" so to speak... Doesn't help there's no changelog...
Found the case doesn't seem to register being closed easily so it just leaves the phone on even though I have the original case that has the screen cutout for clock and whatnot.
Keyboard still doesn't support swype...
Click to expand...
Click to collapse
Untick the userdata.img if you don't want your data to be wiped.
racer290 said:
Has someone give this Beta a try?
Click to expand...
Click to collapse
Been running this for a number of days now, not run into any problems except it was slightly more difficult to root, lot of trial and error but I'm going to post a tutorial on how I rooted it later today.
Jonny said:
Been running this for a number of days now, not run into any problems except it was slightly more difficult to root, lot of trial and error but I'm going to post a tutorial on how I rooted it later today.
Click to expand...
Click to collapse
Correction, someone has already posted the method here >>> http://forum.xda-developers.com/elephone-p9000/how-to/how-to-root-elephone-9000-stock-rom-t3359315
The tutorial in the link above works for this firmware version as well.... could have saved myself a lot of time if I'd read that first lol. For convenience I've put all the files needed in a zip file (link below). Just use SP Flash Tool to flash the recovery, then flash the 2 other zip files from TWRP
ZIP File >>> https://mega.nz/#!IlgxgDhS!r6_OpFYLVv07o025ecJ9rDul2db1KMsoWAlZbabWMxI
trying to flash this but SPTools (5.1520.00) giving me "Error: Initializing scatter file failed. Please check the name of the scatter file which you load is legal" any ideas as to why? I have tried the other rom listed that isn't the BETA and get the same error...
Also, I don't appear to have the Allinone.bin file for the DownloadAgent, can someone please share that too me?
Thanks
Ignore that, I seem to have got it working.
Where do you get these ROMS from? I'm looking for rom version 20160318 for the p9000 lite.
karl0ss said:
trying to flash this but SPTools (5.1520.00) giving me "Error: Initializing scatter file failed. Please check the name of the scatter file which you load is legal" any ideas as to why? I have tried the other rom listed that isn't the BETA and get the same error...
Also, I don't appear to have the Allinone.bin file for the DownloadAgent, can someone please share that too me?
Thanks
Ignore that, I seem to have got it working.
Click to expand...
Click to collapse
use ever latest sp flashtool!
5.1604 or newer for Android 6 and P10 chipset
megthebest said:
use ever latest sp flashtool!
5.1604 or newer for Android 6 and P10 chipset
Click to expand...
Click to collapse
I could only get 5.1604 working, 5.1612 wouldn't work for me at all on Windows 10 in VirtualBox.
This is officiel or not ? and GPS work for you on this rom ? is it based on 20160315 ?
Bradco said:
This is officiel or not ? and GPS work for you on this rom ? is it based on 20160315 ?
Click to expand...
Click to collapse
please read.. is not based on 20160315 .. is a new stock rom 1st of April.. but still in beta stage..
I hear about a new OTA here http://forum.xda-developers.com/elephone-p9000/help/ota-update20160319-t3364691
megthebest said:
please read.. is not based on 20160315 .. is a new stock rom 1st of April.. but still in beta stage..
I hear about a new OTA here http://forum.xda-developers.com/elephone-p9000/help/ota-update20160319-t3364691
Click to expand...
Click to collapse
Ok thanks
Hi All,
Yes, it's not a mistake, I need to revert one of my Swifts to 6.0.1
I applied the 'update' offered by Wileyfox, and was appalled by the changes, especially foisting Truecaller on me. Because my other Swift is still on 6.0.1, I could see what had been broken.
So, I need help to find a signed zip + instructions on how to apply it please.
I would also like to remove the 'nag' from the other Swift, mainly to make sure I don't apply the upgrade by accident.
TIA
Dave
Hi visit this site you can find some here https://cyanogenupdatetracker.com/downloads/
hope it helps.
Zetren said:
Where can one get the latest CyanogenMod?
Click to expand...
Click to collapse
The CM 13.1.5 on cyanogenupdatetracker seems to be the latest available version, alternative sites offer just 13.1.2.
Zetren said:
Thanks, I am inquiring however after CyanogenMod, not CyanogenOS.
Click to expand...
Click to collapse
CyanogenMod SHUTDOWN
The latest version is 13.1.2 for ur swift
This is it , its fastboot rom u need pc , adb
Have fun
https://www.androidfilehost.com/?fid=24694152805484750
You're a power user. Can the Huawei Mate 9 Pro keep up? Rate this thread to express how "healthy" the development scene is for the Huawei Mate 9 Pro. A higher rating indicates available root methods, kernels, and custom ROMs.
Then, drop a comment if you have anything to add!
This is a weak spot as it's no well known worldwide. Dev's are not too many and custom ROMs or even Official Updates are missing.
Official updates are excellent and fast since android 8 dropped. I usually get security updates the same month they are for. But it's true, no real custom rom development as of yet. Hopefully we get better sw once Project Treble compatible roms are available.
The Phone is good enough. Nothing spectacular. When I got the root sorted by using the Krom root, the phone is stable. I have high hopes and expectations for the resurrection remix ROM via the openkirin project, in my opinion the best ROM out there.
H10N3 said:
The Phone is good enough. Nothing spectacular. When I got the root sorted by using the Krom root, the phone is stable. I have high hopes and expectations for the resurrection remix ROM via the openkirin project, in my opinion the best ROM out there.
Click to expand...
Click to collapse
Would you please explain how did you root your phone with mentioned method (kroom root) ?
Do you think I will be able to root my phone Huawei Mate 9 PRO (LON-L29 8.0.0.378(C432)
I have been searching for root for a long time now, but I am very confused since there isn't really good community around this model.
I hope somebody will be able to help rooting my phone.
Thank you in advance guys
halilyildiz said:
Would you please explain how did you root your phone with mentioned method (kroom root) ?
Do you think I will be able to root my phone Huawei Mate 9 PRO (LON-L29 8.0.0.378(C432)
I have been searching for root for a long time now, but I am very confused since there isn't really good community around this model.
I hope somebody will be able to help rooting my phone.
Thank you in advance guys
Click to expand...
Click to collapse
Assuming you have unlocked the bootloader.
You can download Krom from here: https://forum.xda-developers.com/mate-9-pro/development/kangvip-rom-b354-mate-9-pro-links-t3790605
When you unzip the rom files, you will find Run.bat Run that file and when it's time to install, you get to the install menu, you select option 2 instead of option 1. Your phone will then be rooted and reboot. Enjoy.
H10N3 said:
Assuming you have unlocked the bootloader.
You can download Krom from here: https://forum.xda-developers.com/mate-9-pro/development/kangvip-rom-b354-mate-9-pro-links-t3790605
When you unzip the rom files, you will find Run.bat Run that file and when it's time to install, you get to the install menu, you select option 2 instead of option 1. Your phone will then be rooted and reboot. Enjoy.
Click to expand...
Click to collapse
Thank you for quick reply
I will try it as soon as I have time and write back here.
But in download section of kangvip roms the latest version of kangvip is m9pro... E.8..370, mine is 378 do you think it is going to be problem if I use that, or should I try to downgrade somehow?
halilyildiz said:
Thank you for quick reply
I will try it as soon as I have time and write back here.
But in download section of kangvip roms the latest version of kangvip is m9pro... E.8..370, mine is 378 do you think it is going to be problem if I use that, or should I try to downgrade somehow?
Click to expand...
Click to collapse
I rooted my 378 with the same kangvip installer that I used for 370.
H10N3 said:
I rooted my 378 with the same kangvip installer that I used for 370.
Click to expand...
Click to collapse
Thank you very much for the support. I am still searching for the best way to get root to bypass safetynet. It seems like magisk root is best way to do so. I am also looking for twrp supports decryption, I might have found one I didn't try it yet. This is the link https://forum.xda-developers.com/mate-9/development/recovery-twrp-3-2-1-0-t3783353
H10N3 said:
I rooted my 378 with the same kangvip installer that I used for 370.
Click to expand...
Click to collapse
Thank you for the reply man...
Well I guess I will not be able to root after all since I don't have the bootloader code. I contacted Huawei support, they do not promise anything but there is still a tiny hope.
I know there is options like DC unlocker etc but I didn't get / read any confirmation about that anyone have successfully rooted their mate 9 pro [No EXTERNAL SD double sim version (LON-L29)] with a DC given code.
In this point I don't know what to do. Even if if I somehow manage to get the bootloader code I still need to find proper magisk root method. Mate 9 pro has no good community unfortunately.
I know my next phone is gonna be root friendly device like One Plus 6 or Google phone etc.
I hate not having full control of my own device.
halilyildiz said:
Thank you for the reply man...
Well I guess I will not be able to root after all since I don't have the bootloader code. I contacted Huawei support, they do not promise anything but there is still a tiny hope.
I know there is options like DC unlocker etc but I didn't get / read any confirmation about that anyone have successfully rooted their mate 9 pro [No EXTERNAL SD double sim version (LON-L29)] with a DC given code.
In this point I don't know what to do. Even if if I somehow manage to get the bootloader code I still need to find proper magisk root method. Mate 9 pro has no good community unfortunately.
I know my next phone is gonna be root friendly device like One Plus 6 or Google phone etc.
I hate not having full control of my own device.
Click to expand...
Click to collapse
I'm with you on this one.
Owning this device has taught me a few life long lessons:
1. Buy a popular phone, more spare parts, cheaper repair
2. Buy a popular phone, more community support and custom ROMs
3. Buy a popular phone, cheaper, especially second hand, which I personally prefer
4. Buy a popular phone, got an issue? Someone else already solved it
5. ???
6. Profit
Would like to use a clean version of Android instead of the EMUI version that is loaded on all their phones.
Seeing how these phones are identical, figured what would work for one would work with the other.
Thanks for giving me any insight.
Coming from the Galaxy Note 4 - hoping I'm not making a mistake with this phone that is enroute.
+1
Nothing happening on this phone I guess.
Jimi Mack said:
Nothing happening on this phone I guess.
Click to expand...
Click to collapse
Guess you haven't bothered looking at the ROMs and development section. While alot of ROMs are not what I would deem "daily material", their is working going on to get ROMs on this device.
Sent from my BND-L24 using Tapatalk
Here is a list of supported custom ROMs on Mate SE, Choose the A only ROM.
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
The whole custom ROM world has changed, Now you need to apply system.img instead of rom.zip using fastboot command.
I have the PHH-Treble installed on my Huawei Mate SE. here is the link.
https://forum.xda-developers.com/pr...-development/experimental-phh-treble-t3709659
In addition, I'd check out the Open Kirin site. I've read the Lineage version is outstanding and well tuned for the chip. They list the 7x as supported but I've read the Mate SE most certainly is also.
https://openkirin.net/download/
nook'r said:
Here is a list of supported custom ROMs on Mate SE, Choose the A only ROM.
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
The whole custom ROM world has changed, Now you need to apply system.img instead of rom.zip using fastboot command.
I have the PHH-Treble installed on my Huawei Mate SE. here is the link.
https://forum.xda-developers.com/pr...-development/experimental-phh-treble-t3709659
Click to expand...
Click to collapse
Learning about this phone, why the A only roms?
AsItLies said:
In addition, I'd check out the Open Kirin site. I've read the Lineage version is outstanding and well tuned for the chip. They list the 7x as supported but I've read the Mate SE most certainly is also.
https://openkirin.net/download/
Click to expand...
Click to collapse
I've been running the OpenKirin Lineage v4 on my Mate SE as daily driver for over a week. It is outstanding. Not going back to emui.
olswede said:
I've been running the OpenKirin Lineage v4 on my Mate SE as daily driver for over a week. It is outstanding. Not going back to emui.
Click to expand...
Click to collapse
Coincidentally, just booted that ROM (on my SE) today. It's very very good, noticed a few minor glitches to do with the camera and navigation (will let them know about em).
I'll admit though, emui8 is growing on me It's certainly better than 5.1 was. Love to see the roms becoming available though. No doubt when updates stop (or before), they will be critical to have.
AsItLies said:
Coincidentally, just booted that ROM (on my SE) today. It's very very good, noticed a few minor glitches to do with the camera and navigation (will let them know about em).
I'll admit though, emui8 is growing on me It's certainly better than 5.1 was. Love to see the roms becoming available though. No doubt when updates stop (or before), they will be critical to have.
Click to expand...
Click to collapse
I don't mind emui except that the power-saver regularly kills tasker, ad-blocking vpns, etc. I've tried everything to exempt them from power saving but no go. The battery life is outstanding though (I usually only lose 15% after a full day's usage), so for average users it's a bonus.
nook'r said:
Here is a list of supported custom ROMs on Mate SE, Choose the A only ROM.
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
The whole custom ROM world has changed, Now you need to apply system.img instead of rom.zip using fastboot command.
I have the PHH-Treble installed on my Huawei Mate SE. here is the link.
https://forum.xda-developers.com/pr...-development/experimental-phh-treble-t3709659
Click to expand...
Click to collapse
Hey thanks for pointing me in the right direction. I have not installed a custom ROM in a long time.
---------- Post added at 08:44 AM ---------- Previous post was at 08:40 AM ----------
olswede said:
I've been running the OpenKirin Lineage v4 on my Mate SE as daily driver for over a week. It is outstanding. Not going back to emui.
Click to expand...
Click to collapse
This looks sweet, but the instruction on this site say I need my custom bootloader,and i can't find a guide how to do that. i have TWRP
AsItLies said:
Coincidentally, just booted that ROM (on my SE) today. It's very very good, noticed a few minor glitches to do with the camera and navigation (will let them know about em).
I'll admit though, emui8 is growing on me It's certainly better than 5.1 was. Love to see the roms becoming available though. No doubt when updates stop (or before), they will be critical to have.
Click to expand...
Click to collapse
Any chance you'd elaborate on the issues you've come across? I'm thinking about loading it up but don't want to lose functionality
JakeBuck said:
Any chance you'd elaborate on the issues you've come across? I'm thinking about loading it up but don't want to lose functionality
Click to expand...
Click to collapse
Nothing terribly serious. I didn't use it for long, but the camera option for selfie shutter 'palm to camera' didn't work. Also the recently taken shots didn't show in the bottom gallery (I read this is fixed now). And the navigation arrows at the bottom seemed to not be persistent somehow (after a reboot this was okay).
It's easy to go back to stock, except if you haven't backed everything up, have to reconfigure, add / subtract apps etc.
I'd suggest searching for the openKirin website, they seem to be doing the most development. Also follow their directions, they worked for me and pretty easy.
Hi
How does one flash the "Openkirin_los_beta4" Iso to the Mate SE (BND-L34)? TWRP?? Fastboot??? what are the exact steps to not render it a paper weight again lol; Do you need Magisk-v16.0 to root it as well?
Scythe69 said:
Hi
How does one flash the "Openkirin_los_beta4" Iso to the Mate SE (BND-L34)? TWRP?? Fastboot??? what are the exact steps to not render it a paper weight again lol; Do you need Magisk-v16.0 to root it as well?
Click to expand...
Click to collapse
https://openkirin.net/user_guide/openkirin-rom-installation-instructions/
zackzuse said:
This looks sweet, but the instruction on this site say I need my custom bootloader,and i can't find a guide how to do that. i have TWRP
Click to expand...
Click to collapse
No, you don't need a custom bootloader.
You only need unlocked bootloader and unlocked frp.
TWRP is not supported on OpenKirin ROMs (especially on 7x twrp won't work).
You just need to flash the .img file through bootloader and then reboot to recovery and do a factory data reset.
Can anyone give me some advice: I have the Mate SE, currently on EMUI 8.0.0.332 (security update available but not installed), with TWRP and Magisk. I would love to install a custom ROM, but the OpenKirin site says TWRP isn't supported. Can I still install one of those builds and just expect no support if something goes wrong, or should I find some way to return to full stock before flashing? And if I need stock recovery, where can I find a download for it? I haven't had any luck on searching here yet.
Install Android 9.0 Pie on Honor 7X – AOSP 9.0 Pie ROM
youssef alonso said:
Install Android 9.0 Pie on Honor 7X – AOSP 9.0 Pie ROM
Click to expand...
Click to collapse
Has anyone tried this custom ROM? I would love to hear some success stories before possibly bricking my device
awlonsky said:
Has anyone tried this custom ROM? I would love to hear some success stories before possibly bricking my device
Click to expand...
Click to collapse
Pretty much any GSI works so long as you have updated to EMUI 8 sometime in the past.