Backup replacing doesnt work, startscreen hang - OnePlus 3 Questions & Answers

Hellow,
I'll start at the start.
So i have a OP3 with 3.2.2 and installed a EX kernel (latest) through twrp recovery. All fine here...
Today i wanted to install Resurrection remix (latest release as from 10/09/2016) (tried both kernel versions cm and rr)
both gave me error 7. I did a factory reset through the base OS and tried again wich was not the solution it seemed.
So i tried reinstalling the nandroid backup (cache, system, and...) i took before getting into installing the new rom.
when i rebooted after putting the backup back it hangs on de 1+ logo and powered by android sign.
wichever rom i tried installing afterwards (even sideload) didnt work 'error 7'
I dont get why he keeps giving me an error 7.
hope some of you guys can gimme a hand with this cause its my daily driver :s
greets Verdi
P.S. i am a regular follower of xda just dont post alot so forgive me if this is the wrong section. I tried to find the most apropriate one to the best of my abilities.

Related

Galaxy Note 10.1 2014 (LTE) not working after failed backup

First of all, hi @ all
Today I rooted my Tablet sucesfully using Odin3 with CF-Auto-Root-lt03lte-lt03ltexx-smp605.tar.md5
After this I tryed to backup all important stuff using TWRP so in case that flashing CM fails I could return to android without problems.
Becourse of a problem with the newest twrp message I got an information that the backup is going to be safed on the intern memmory (so I later would have to move it manually to the externSD card). Well that did not sound like a problem so I started the backup function, it bootet in the recovery mode.
Well I expected it to run automaticly after choosing wich partitions it should backup so I did not knew what to choose in the menu and decided to reboot wondering if I missed some explenation.
It looks like that was a bad idea, after the Samsung logo I just get a blackscreen and dozens of messages that xzy was terminated. Rebooting doesnt help.
So ironicly I crashed my device while trying to backup
At least I have absolut 0 personal data on it so I lost at least nothing.
Now my Questions:
A)To return to use my device again with android I can still use this? sammobile.com/firmwares/download/40784/P605XXUCNL1_P605BTUCNL2_BTU.zip
And is there somewhere a faster download?
Or is there a chance that after wipe data/factory reset I can use it again?
B) If I get techsoncall.wordpress.com/2015/03/30/installing-cyanogenmod-on-galaxy-note-10-1-2014 this right I actualy could just clear now the entire intern memory of my tablet, cpy the Cyanogenmod (and may gaps) on the sdcard and flash then install it to get my tablet running CM?
I would admire every comment, Im going to fly in few days so I'm actually a little bit stressed course of this fail
Well a hardreset helped but the problem was that I just installed the TWRP app and did not install the recovery mod with this app.
After doing that everything runs fine.

Installed Lineage 14.1, get messages Hello, I've been trying to install Lineage 14.1

Hello,
[Sorry: can't edit title]
I've been trying to install Lineage 14.1 on my Samsung Galaxy Tab Pro (SM-T520), and haven't been successful.
I keep getting the message "Google Services Framework keeps stopping", sometimes alternating with the message "android.process.media has stopped".
I've used the following installation procedure:
1. Starting with the stock Samsung Android v4.4.2, I used Odin v3.1.2, to root the device, by installing
CF-Auto-Root-picassowifi-picassowifixx-smt520.tar.md
2. I used Odin to install picassowifi TWRP v2.8.7.0. I didn't use the latest v3.1.1-0, because it reboots the
device while making Nandroid backups. Available here
https://eu.dl.twrp.me/picassowifi/
3. I copied several versions of Lineage OS amd Gapps (see below) to the device's SD card
4. I used TWRP to wipe the cache/dalvic/data/system each time, using the Wipe->Advanced option
5. I used TWRP to install the Lineage OS amd Gapps as an atomic operation on the device
6. After installation, I rebooted from TWRP:
- without rooting: I get the message "Google Services Framework keeps stopping"
- with rooting, by installing SuperSU: The device enters into a boot loop, displaying the sliding Lineage logo
I followed the same procedure to update my Samsung Galaxy S4 Mini, and it worked flawlessly.
I tried the following Lineage OS versions, available here:
https://download.exynos5420.com/LineageOS-14.1/n2awifi/
lineage-14.1-20170506-UNOFFICIAL-n2awifi.zip
lineage-14.1-20170715-UNOFFICIAL-n2awifi.zip
I also tried the folowing Lineage OS versions, available here:
https://download.lineageos.org/n2awifi
lineage-14.1-20170608-nightly-n2awifi-signed.zip
lineage-14.1-20170713-nightly-n2awifi-signed.zip
I tried the following versions of Gapps, available here (32-bit arm, Android v7.1, stock variant):
http://opengapps.org/?api=7.1&variant=stock
open_gapps-arm-7.1-stock-20170505.ziip
open_gapps-arm-7.1-stock-20170711
I tried several combinations of these 2 packages. With all the combinations I tried, I got the results summarised above.
This post suggests installing Lineage OS alone without Gapps, and then install Webview Implementation, if not installed:
http://www.lineageosrom.com/2017/02/how-to-fix-google-play-services-error.html
When I tried this and reboot, I get the messages "android.process.media" has stopped, followed by the message "clock has stopped". When I click away these messages, and click on next on the Lineage OS screen, the device enters into a boot loop displaying the sliding Lineage logo. This agrees with the Lineage recommendation, that both packages need to be installed at the same time:
https://wiki.lineageos.org/devices/n2awifi/install
Can anyone please help? I really don't want to go back to Android v4.4.2 on my SM-T520.
Hello so to get rid of the error I would suggest downloading samsung kies 1 not 2 or 3 and flashing completely back to stock then try rooting and flashing rom should get rid of system errors and force closes. Kies will ask you for model and serial number. Serial is found on back of the tablet. As another suggestion I would try resurrection remix by cosmox. It is very stable everything works. I just posted a link in that thread with a link to download samsung kies for a 64 bit windows and other relevant files if you need. Let me know if you need any other help. Also closer inspection of your links. I think for sm-t520 u should be using twrp Picassowifi, not n2awifi so idk if that will work or not. Not sure about that part though because they may have made it work on Picasso.
Thanks paintball.
I confirm that I had used picassowifi TWRP. I've edited the original post to indicate this.
I've also tried what you suggested - I reinstalled the original stock Samsung firmware using Odin, and used TWRP to again install Lineage. Same result, still displaying the same Google Service errors.
I'll look at the Resurrection remix.
Paul
paintball,
I've found a solution, that I thought I'd post here in case anyone else has the same problem.
I wiped the cache/dalvic after each step of the installation:
Wipe-> Advanced -> wipe cache / data / dalvic / system
Install -> flash Lineage -> wipe cache/dalvic
Install -> flash Gapps -> wipe cache/dalvic
Reboot -> don't install SuRoot
I got a Music closed error during the first boot, which hasn't appeared since.
Afterwards, I used Odin to install CF-Auto-Root. The device rebooted twice after this step, but now appears to be OK.
A final problem I had was that it couldn't find my wifi SSID. I solved this by setting wifi region to Europe.
ppmoore said:
Thanks paintball.
I confirm that I had used picassowifi TWRP. I've edited the original post to indicate this.
I've also tried what you suggested - I reinstalled the original stock Samsung firmware using Odin, and used TWRP to again install Lineage. Same result, still displaying the same Google Service errors.
I'll look at the Resurrection remix.
Paul
Click to expand...
Click to collapse
I suggested using Samsung kies which I'm positive works, not Odin, but I'm glad you got it fixed.
ppmoore said:
Hello,
[Sorry: can't edit title]
I've been trying to install Lineage 14.1 on my Samsung Galaxy Tab Pro (SM-T520), and haven't been successful.
I keep getting the message "Google Services Framework keeps stopping", sometimes alternating with the message
<snip>
Click to expand...
Click to collapse
I'm having a similar issue. Mine differs in the following ways.
I was able to successfully install and run LineageOS with OpenGApps full, but reverted to a nandroid backup because I needed some information from the original install. Since then, I have been unable to get past the initial couple of screens for setting things up--and this with the constant "Google Services Framework keeps stopping" error.
I have tried most of the "fixes" I've found but to no avail. I notice that, (1) when I go to the drop-down menu and setup WiFi, as soon as the device connects to the Internet, I go to the Lineage bootup animation and get stuck there. If I hard boot from there, I can get in up to the point where I connect to the Internet (not just router, but actually get through to the Internet) and (2) I cannot enable Developer options--when I try, no matter how many times I click on the Build number, I get no indication of the options being enabled.
I have tried several permutations of Lineage OS nightlies along with various flavors of OpenGApps, with and without root, wiping cache/dalvik/data/system, wiping only some, wiping none.
I also cannot restore the backup of the running LOS that I had up (I did take a backup before going back to the original setup). When I try, I get the same results as above--as if I had backed-up an un-instantiated setup.
Any thoughts?
eckster said:
I'm having a similar issue. Mine differs in the following ways.
I was able to successfully install and run LineageOS with OpenGApps full, but reverted to a nandroid backup because I needed some information from the original install. Since then, I have been unable to get past the initial couple of screens for setting things up--and this with the constant "Google Services Framework keeps stopping" error.
I have tried most of the "fixes" I've found but to no avail. I notice that, (1) when I go to the drop-down menu and setup WiFi, as soon as the device connects to the Internet, I go to the Lineage bootup animation and get stuck there. If I hard boot from there, I can get in up to the point where I connect to the Internet (not just router, but actually get through to the Internet) and (2) I cannot enable Developer options--when I try, no matter how many times I click on the Build number, I get no indication of the options being enabled.
Any thoughts?
Click to expand...
Click to collapse
Hi Eckster,
I have exactly the same problem on a LG G2 with LOS 14.1. It ran July version perfectly but I didn't make a backup and now I'm stuck. Did you ever manage to fix this?
Thanks,
Kevin
Managed to solve it. I formatted all partitions _including_ data (which means you'll also loose all zips you wanted to install so make sure that adb is working). Then rebooted into the recovery. Installed as usual, worked.
detlef25 said:
Managed to solve it. I formatted all partitions _including_ data (which means you'll also loose all zips you wanted to install so make sure that adb is working). Then rebooted into the recovery. Installed as usual, worked.
Click to expand...
Click to collapse
how did you format the partitions? I can only find "format data".. thx
detlef25 said:
Managed to solve it. I formatted all partitions _including_ data (which means you'll also loose all zips you wanted to install so make sure that adb is working). Then rebooted into the recovery. Installed as usual, worked.
Click to expand...
Click to collapse
:thumbsup: I was on lineage 14, all was well. I tried an old stock rom NK2, that was fine. I tried to restore lineage backup via twrp, got this problem with the framework crashing. No amount of re-flashing twrp nor lineage, gapps, modem, bootloader, etc nothing worked; always crashed right after boot to lock screen. Finally twrp "format data" - yes. Now lineage boots to welcome, no crash; restore backup - after copying it back to internal - and all is good.
I'm glad it works but why is it needed in this case to remake the filesystem on data - does it work by removing some bad file or does it work by rebuilding the ext4 and security context? this is with latest twrp twrp-3.2.1-0-klte.
Hi,
don't know if you solved it eventually, or maybe helpful for other people with the same problem. I had the same problem, spent 6 days digging around on the internet why the framework keeps stopping and crashing.
I eventually found out that:
- TWRP 3.0.2.0 is WAY more stable than 3.1.1.0 (which never succeeded in installing gapps without crashing)
- Wiping system, data, dalvik recovery and internal storage is not the only thing that needs to be done. You also need to use the 'FORMAT DATA" button (everything will be wiped from your tablet, so, as always, backups )
- After that, install the lineageOS binary, after the installation, wipe dalvik/cache, go back and install the appropriate GApps package, wipe dalvik/cache and reboot
Say whatever you need to whatever deity you prefer and wait for the tablet to boot.
I hope to be of some help to other people having the same problem
Code:
Sent from my SM-S920L using Tapatalk
grammar
detlef25 said:
Managed to solve it. I formatted all partitions _including_ data (which means you'll also loose all zips you wanted to install so make sure that adb is working). Then rebooted into the recovery. Installed as usual, worked.
Click to expand...
Click to collapse
Was going crazy trying to figure out why LineageOS was encountering so many ANRs. The first time I flashed Lineage it worked beautifully but every time after that it just went nuts. This fixed it for me, thanks dude!
Note to others who may end up here, after formating data I had to install a stock ROM, then wipe and install Lineage. Lineage wouldn't install due to Updater process ended with ERROR: 7 which was because there was some bit of information that was on the data partition that showed the install script that the phone was actually a Note II. Formating data blows that info away but installing stock puts it back on.
LievenVanh said:
I eventually found out that:
- TWRP 3.0.2.0 is WAY more stable than 3.1.1.0 (which never succeeded in installing gapps without crashing)
- Wiping system, data, dalvik recovery and internal storage is not the only thing that needs to be done. You also need to use the 'FORMAT DATA" button (everything will be wiped from your tablet, so, as always, backups )
- After that, install the lineageOS binary, after the installation, wipe dalvik/cache, go back and install the appropriate GApps package, wipe dalvik/cache and reboot
Click to expand...
Click to collapse
Coming into this thread after a few hours of struggle with an old GS4 I can say that this method instantly worked for me as well.
Thanks!
Thanks for the help to resolve my issue of installation. Do you have a solution for Zoom , where my audio (cannot hear other speakers) and video is missing. Did enable access for Mic, Camera etc in App permission.
Look at this thread: https://forum.xda-developers.com/ga...-t520-unofficial-lineage-14-1-t3538770/page86 -- last two posts
hamudistan said:
Look at this thread: https://forum.xda-developers.com/ga...-t520-unofficial-lineage-14-1-t3538770/page86 -- last two posts
Click to expand...
Click to collapse
That solution didn't work. My Zoom audio still not working.

asus ze551kl(z00td) goes into bootloop as i remove it from charger.

hey guys.
i had stock android m running on my device. today while watching videos, it just went into a bootloop. so after that i tried the usual stuff, ( clear cache, reset) it didnt work. next i tried to install a new rom. i used [ROM][8.1.0][OFFICIAL] BootleggersROM v3.0 [STABLE][Z00L][Z00T] from https://forum.xda-developers.com/zenfone-2-laser/development/rom-bootleggersrom-v2-1-t3771187 .
i installed this by going into twrp but had some hiccups as i couldnt intall it as i had an outdated twrp, so i edited the updater script in the meta-inf of the rom( hope op doesnt mind). the rom then installed perfectly,i did another wipe of the cache and i rebooted. it was still in bootloop.so i plugged in the fone to my laptop then it booted perfectly. btw its a nice rom. but when i take the fone out of the cable, it starts to reboot continuously.
can i have some guidance please
sorry guys wrong place. should have been in zenfone 2 laser.
sorry again

Help: None of the ROMs I tried installing are booting. (SM-A720F)

Hello,
I'm really new to all this android thing, but I decided to root my Samsung Galaxy A7 2017 using magisk, for which I used this guide.
After some time of enjoying some root features I decided to try a custom ROM, the first one I tried was this one, since I heard that resurrection remix is one of the most feature rich ROMs. After flashing the zip file with TWRP I booted into system, I read that the first boot after flashing a ROM usually takes up to 10 minutes, but after just 1 to 2 minutes of showing the boot animation the device restarted and sent me back to TWRP. After this I did some searching here on XDA and watched some youtube videos that claimed to solve the problem, but none of them worked for me, as they mostly just said to reinstall the ROM and wipe dalvik cache and normal cache.
Since my phone came with stock android 8.0 I thought of installing LineageOS which was only official ROM based on android 8.0 that I could find for my device, but the same thing happened, boot animation for 1-2 minutes and then it sends me to TWRP.
In both of these attempts I downloaded everything to my pc and then moved it to my phone's internal storage.
I noticed that people were donwloading the files direcly from the phone itself, so I did that with LineageOS and after tring to boot it gave me the error "Encryption unsuccesful" with the option to reset my phone, I search in google about this problem but I'm doubtful of what to do now.
I would apreciate if someone told me what this error is, what could be the cause of it and how to fix it, and most important of all why won't my phone boot into a custom ROM and how can I get it to do so.
Thanks in advance!

Galaxy s9 Exynos Booting problem

Hello to everyone!
I need help about my s9, few days ago I installed LightROM on my s9(over the TWRP lastest version),everything worked fine,I was curios about installing the other kernel, which I did, I installed(whitewolf kernel) and after that Im not possible to boot my phone into the ROM, in case if LightROM is installed its looping in SAMSUNG logo, if AOSP is installed it boots into Download mode. Dont know why is phone acting this wierd now. Im downloading the default stock rom right now, Ill try to install it with Odin, hope that will reset everything back to normal. Im writing this thread in meantime while Im waiting maybe some of you knows the fix, so I dont have to download the stock rom(firmware).
Tried installing the stock kernel from AROMA installer, it doesnt change anything. If I set TG kernel to be installed, it passes the samsung logo but gives me encryption failed. I tried also installing the by pass for encryption but it gives me error "1" in TWRP.
Hope someone helps,Im out of ideas!
Thanks have a great day(atleast better than mine)

Categories

Resources