Edit: solution added
problem:
after flashing a rom (in my case OP3lite or FreedomOS) you can't get past the boot logo
you have access to TWRP, so you can restore nandroid or flash flashable stock OxygenOS packages (tutorial here)
solution:
wipe: Dalvik /ART Cache, Cache, Data, System
flash your rom
try to boot (most likely will get stuck at boot logo)
boot into TWRP > Advanced > Fix Contexts, and swipe to Fix Contexts
Reboot
(wait a while, it might take a few minutes till it boots)
___________________________________________
original post:
hi,
I'm running official OxygenOS 3.1.3.
Rooted (systemless) , TWRP installed.
I don't have any problems on my rom, but everytime I flash a rom I get stuck at the boot logo.
I can just force reboot, goto twrp and restore my nandroid backup, and my phone works fine again.
But I can't flash any rom.
tried this:
Dirty flash OP3Lite rom - stuck at boot logo
wipe and install OP3Lite rom - stuck at boot logo
Restored nandroid backup, factory format, wipe and install OP3Lite rom - stuck at boot logo
wipe and install FreedomOS - stuck at boot logo
Restored nandroid backup, factory format, wipe and install FreedomOS - stuck at boot logo
wipe, Format userdata throught fastboot, install FreedomOS - stuck at boot logo
update to OxygenOS 3.2.1 (flashable zip throught twrp)
wipe and install FreedomOS - stuck at boot logo
Both roms I tried are OxygenOS 3.2.1 stock based, my problem is most likely not due to the rom I want to flash.
Anyone knows a solution for this?
is it possible that systemless root causes this problem?
are you encrypted? that might be the issue.
backup your internal sd data then go to fastboot and fastboot format userdata then flash the rom you want
Abaddon said:
are you encrypted? that might be the issue.
backup your internal sd data then go to fastboot and fastboot format userdata then flash the rom you want
Click to expand...
Click to collapse
I never did format my userdata throught fastboot, so I might be encrypted.
I'll try tomorrow and let you know if that was the solution.
@Abaddon I format my userdata throught fastboot (fastboot format userdata), but still roms wont go past the Logo . any other idea?
did you full wipe?
wiped /system too before flashing a rom then u go and flash the rom + gapps if needed
how long was it at the boot logo? no animation correct?
did u advance wipe - data, caches, system instead of factory wipe, try it 3 times
I did a few wipe 3 times, still stuck at logo.
I get stuck on this logo, never reboot, just get stuck there.
I noticed that it does flash the rom, cause if I restore my nanodroid backup layers and adblock is added.
I also get zero error while flashing in twrp.
I fixed it .
did a fill whipe, then flashed feedomOS, then tried to boot, didnt get past the logo, booted into recovery, selected "fix Contexts" and then rebooted, started without any problem .
doesent work for me..!! any help
Same here this issue keeps occuring again and again. then i always have to follow mega unbrick guide
Resurrection ROM 7.1.1 stuck at logo after every restore
nikhilsnigam said:
Same here this issue keeps occuring again and again. then i always have to follow mega unbrick guide
Click to expand...
Click to collapse
Faced this issue every time I restore any nandroid on one plus 3. It stucks at rotating resurrection logot . Even tried fix contents from TWRP, no output. Please help without a functional TWRP backup and restore - phone is useless. Only everytime mega unbrick guide needs to be repeated with painful reinstall of apps
hello guys. sorry if I'm a bit slow on this topic. I'm using the the op3t A3010 version (not dure whether I'm at the right forum or not lol) Recently I updated my phone to the new 4.1.7, in which I had already rooted the phone before with magisk v12. But right after the update, as usual, the phone will unroot and yes I did root the phone back by using the magisk v13.0 version. But it failed the safety net. So after a few 'research', I installed the superuser just in case that the safety net will work this time. But this is when it all went wrong. The phone did restart back to factory settings, but the phone is not rooted (checked by using the rootchecker app) So again, I'm back to the twrp recovery, clean wipe all the data, with hope that I can start from scratch which is from installing the magisk all over again. But after this step, it stuck at the boot logo for like more than half an hour. Than at this moment, I restart my phone back to recovery mode by long pressing the power button, and when I try to install both the magisk 12 and 13 version, there is a line of error code on the screen. There's a site that says simply go to the advance setting on the twrp interface, check fix contents and ur phone will be as good as new. After done doing that, I'm now stuck with a phone with no os installed and about 38% battery left. Can anyone help me here? This is the only phone that I had :crying: Urgent help needed here guys
Unless your original installation is without storage encryption (no dm-verity) this will happen. So next time install custom rom after flashing OB22 firmware+modem, then boot patch for dm-verity followed with custom rom and gapps then boot without wipe
i have the same problem but with p9 lite : when i tried a flash lineageOS or ResurrectionRemix my phone stucks at boot logo and when i flash the original os my phone works perfectly
sorry for my english
washichi said:
I fixed it .
did a fill whipe, then flashed feedomOS, then tried to boot, didnt get past the logo, booted into recovery, selected "fix Contexts" and then rebooted, started without any problem .
Click to expand...
Click to collapse
How long did you wait?
washichi said:
Edit: solution added
boot into TWRP > Advanced > Fix Contexts, and swipe to Fix Contexts
Reboot
(wait a while, it might take a few minutes till it boots)
Click to expand...
Click to collapse
What is the work around for CWM v6.0.5.1 Philz Touch6; it does not have Fix contexts under Advanced Functions
My issue: Tecno Spark K7 stuck at boot logo after flashing with ported ROM from Infinix XOS Chameleon . Both kernels match
This is EXACTLY my issue with the galaxy s9 plus. Gonna try the solution you wrote tommorow.
i have the same problem with galaxy s5 and the solution mentioned in the thread did not work with me.
im having the same issue but in lenovo z5 pro gt
PauloVillaflor said:
im having the same issue but in lenovo z5 pro gt
Click to expand...
Click to collapse
Search for answers HERE and if not successful, create a thread in the Q&A forum there.
You may not get any help here since this is the OP 3 forum.
Okay guys, I tried flashing the latest Open beta and am facing a problem.
I was not decrypted and the TWRP flashing completed successfully but it is only booting into recovery. Mounting the MTP storage in TWRP on the computer shows the storage in full.
I flashed the stock recovery and sideloaded the Open beta. It flashed successfully but then too, it is only booting back into the stock recovery and is not booting system. Please help guys.
Any pointers on how to fix this? please...
You may need to flash the factory images manually using fastboot
The radios modem etc.... And clean wipe
Did you try factory reset and flash Official OTA from One plus ?
mi max 3 bootloop after installing twrp via fastboot. after successfully installing and entering twrp I have format data using twrp, but after reboot system I got bootloop. stuck on miui logo n android loading.
how to solve it?
Miui 10 8.9.20
sorry my english is bad.
thanks.
Solved
BGuntur said:
Solved
Click to expand...
Click to collapse
Would you like to share the solution?
You have to be aware to flash a rom after you wipe data partition you need to change data partition to EXT4 for example to prepare to flash a Rom). All of this has to be done while in Recovery before you reboot. It happened to my device when it warned me that i have No OS.
If recovery cannot be flashed correctly, try the TRWP CN version mentioned on page 6 in the AOSiP thread, and if anyone has trouble after changing to EXT4 which is required to flash Custom Rom, just change the data partition (EXT 2 for example) on the advanced wipe/ change partition option, and then change back to EXT 4. And follow the instructions on AOSiP on how to flash properly.
That TWRP worked on first try in case the others don't work.
After boot to the rom... you can go back to Revovery, and flash Nigel's TWRP, and you will not have anymore problems with wiping data and doing OTA manually. (Whenever there's an update)
I hope that someone here can help me rescue to rescue my data.
I was on the AOSiP build from september and than decided to encrypt my device. That worked perfectly. Now I wanted to install the latest update. The internal updater didn't work (just booted into TWRP recovery without further action, so I moved the update file to microsd and than updated manually by flashing the zip file via TWRP). Prior to the whole action, I updated TWRP through the app to the latest version.
Now my phone doesn't boot anymore, it is stuck in the AOSiP boot animation. Reverting to a previous TWRP version (3.2.3.2) didn't help, also flashing the september build again didn't help.
In TWRP I was unable to decrypt data, because TWRP keeps asking me for a password (but I don't remember putting a password in the first place). Therefor I switched from TWRP to OrangeFox recovery. Here decryption worked, put still after flashing the phone doesn't boot.
Anyone that has further ideas how to fix this without loosing all my data? Any help appreciated!
Have you tried installing another kernel?
kotobodj said:
Have you tried installing another kernel?
Click to expand...
Click to collapse
No, but as my system was running before without problems I don't expect the kernel to be the problem .. Or why would that make sense?
SOLVED: I noticed that flashing the update manually didn't automatically flash Gapps right afterwards. So flashing the Gapps helped and the phone now boots normally!