Custom binary blocked by FRP Lock.
I tried going in recovery and doing full wipe, still get the same thing
I have no clue WTH to do to fix this.... A friend was messing with my phone and all I did was restart it and now I can't get past the samsung splash screen.
SM-G928T and yes it was rooted, but it was working fine, even with reboots, until now.
everything I try and do in Odin says write operation failed....
Related
Hi,
I recently tried installing the new 4.3 update onto my Samsung Galaxy S3 I747. Also, I never rooted my phone and my carrier is Telus if that matters.
When my phone finished updating, it lead to the lock screen. Just as I was about to enter my pin and unlock it, the phone restarts and gets stuck on the Samsung splash screen. I have tried entering into recovery mode and then wiping the cache and restarting it, but no luck.
I do not wish to restore my phone back to factory settings because I do not want to lose my music and apps. Is there a solution that can fix it without wiping the memory?
Thanks.
edit: i left it charging for a few minutes while it was stuck on the samsung splash screen, and then it went to the lockscreen and restarted it self
... i have to wait five minutes before i can save my edit
editedit: it just went to lockscreen for a second again
editeditedit: its going back to lockscreen quite often and restarting it self
aznpiggy said:
Hi,
I recently tried installing the new 4.3 update onto my Samsung Galaxy S3 I747. Also, I never rooted my phone and my carrier is Telus if that matters.
When my phone finished updating, it lead to the lock screen. Just as I was about to enter my pin and unlock it, the phone restarts and gets stuck on the Samsung splash screen. I have tried entering into recovery mode and then wiping the cache and restarting it, but no luck.
I do not wish to restore my phone back to factory settings because I do not want to lose my music and apps. Is there a solution that can fix it without wiping the memory?
Thanks.
edit: i left it charging for a few minutes while it was stuck on the samsung splash screen, and then it went to the lockscreen and restarted it self
... i have to wait five minutes before i can save my edit
editedit: it just went to lockscreen for a second again
editeditedit: its going back to lockscreen quite often and restarting it self
Click to expand...
Click to collapse
When you got it into recovery did you try to wipe data/factory reset??
But to be honest it sounds like your phone is soft bricked maybe. I'm experiencing the almost same problem with my AT&T sgh-i747. Mine is stuck at the Samsung Galaxy S III screen and doesn't go any further than that at all.
You will most likely have to do that same thing I am doing which is reflashing android 4.3 via odin. It may work for you, I'm pretty sure it'll work for mine. Head over here and read this thread and see if this can help if not let me know and we'll come up with somethin else to help you fix your phone. (If I'm correct following this thread and flashing via odin will not erase and of your data.)
Your only other real option is to install the 4.3 MJ2 leak via heimdall. http://forum.xda-developers.com/show....php?t=2496425
Heimdall will flash odin files. http://glassechidna.com.au/heimdall But odin will not flash heimdall files. It works much like odin flash in download mode so i'm told. I'm trying to figure it out now. I hope this helps.
I was never able to get the above Heimdall installed correctly on my pc. I am still stuck at the black and white galaxy s3 screen. I installed TWRP via odin to try my to run my nandroid i made earlier today and it says successful. But when I go to reboot It says No OS are you sure you want to reboot. I was already on 4.3.3 via the OTA update like you. And now i'm here turn phone on and it's going straight to download mode
Please HELP US BOTH Someone ANYONE
I screwed up.
I wanted to install a new custom mod after purchasing a new SM-P605. I rooted my device, and searched for a while on how to install a custom recovery (TWRP). I downloaded ODIN and flashed it a couple of times but it didn't work, I kept getting a "recovery is not seandroid enforcing" and the screen freezes.
Then I tried Rashr's flash tool to install TWRP for me, and afterwards selected "boot into recovery".
Now i'm stuck in the same screen, but whenever I tried to restart, i get back to it, and can't get back in the system.
What can I do?
I'm unfortunately stuck in a very similar situation.
I was updating the firmware on my tablet to 4.4.2 downloaded off Sammy mobile, uploading using Odin. I've done this dozens of times since my S2 which was 12 handsets and 6 Android tablets ago. This time, about a third of the way through the process hung for a few minutes then the device restarted without warning and now its stuck in a loop where it starts normally
http://imgur.com/MTwiE5V [1]
Then says
RECOVERY BOOTING...
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit : recovery.
Then this
http://imgur.com/Ua1nmhi [2]
and stays on that screen for short periods before rebooting and starting the above again.
Thanks in advance for any tips or help you guys can provide!
SleepyDonald said:
I screwed up.
I wanted to install a new custom mod after purchasing a new SM-P605. I rooted my device, and searched for a while on how to install a custom recovery (TWRP). I downloaded ODIN and flashed it a couple of times but it didn't work, I kept getting a "recovery is not seandroid enforcing" and the screen freezes.
Then I tried Rashr's flash tool to install TWRP for me, and afterwards selected "boot into recovery".
Now i'm stuck in the same screen, but whenever I tried to restart, i get back to it, and can't get back in the system.
What can I do?
Click to expand...
Click to collapse
Have tried factory reset/clear cache/clear dalvik?
shayind4 said:
Have tried factory reset/clear cache/clear dalvik?
Click to expand...
Click to collapse
Thanks, but it turns out the solution to my problem was simple. I took it to the place I got it from and the guy just pressed power, vol and menu button long enough until it rebooted. I'm quite a noob it seems.
I'm not sure if it will help you Nationalmaverick, because my problem was slightly different.
It's a problem I've never encountered before.
After charging my phone, I go to my usual routine, facebook-ing. After opening the app, my phone hangs. So, i restarted it. Tried opening facebook again, and it hanged again. Another restart, this time, I didn't open facebook, but tinder instead, still hanged.
To my desperation, I went to recovery to reset my phone, unfortunately, after pressing "wipe all user data"(factory reset), the phone restarted before even finishing the process. Now I'm stuck in bootloop.
Then again, I tried dirty flashing the ROM I used before this madness (DN4), before finishing the format process of the installation, the phone restarted AGAIN.
I don't know what happened to this but I can't get pass "galaxy note II" logo and I can't install any ROMs.
Anyone who have experienced this problem? I've tried any solutions I could think of with no luck. I hope someone could help me with this one. Thank yo u very much.
anyf11391 said:
It's a problem I've never encountered before.
After charging my phone, I go to my usual routine, facebook-ing. After opening the app, my phone hangs. So, i restarted it. Tried opening facebook again, and it hanged again. Another restart, this time, I didn't open facebook, but tinder instead, still hanged.
To my desperation, I went to recovery to reset my phone, unfortunately, after pressing "wipe all user data"(factory reset), the phone restarted before even finishing the process. Now I'm stuck in bootloop.
Then again, I tried dirty flashing the ROM I used before this madness (DN4), before finishing the format process of the installation, the phone restarted AGAIN.
I don't know what happened to this but I can't get pass "galaxy note II" logo and I can't install any ROMs.
Anyone who have experienced this problem? I've tried any solutions I could think of with no luck. I hope someone could help me with this one. Thank yo u very much.
Click to expand...
Click to collapse
flash stock through odin. then if everythings works fine you can flash custom recovery and rom again.
Try wiping system and flash again. But Odin seems to be the safest route here.
Mufrad said:
flash stock through odin. then if everythings works fine you can flash custom recovery and rom again.
Click to expand...
Click to collapse
super114 said:
Try wiping system and flash again. But Odin seems to be the safest route here.
Click to expand...
Click to collapse
The only solution that worked was flashing official rom through Odin. Everything seems to work fine now. Thanks!
Congrats.
Hey everyone looking for some help with my friends 32gb s6. He rooted the device last year with no custom recovery (googled and does not remember the site), installed rooted apps and the device was working fine. months later he decided to unroot and go back to stock. Everything was working fine until last week when out of the blue the device went into a boot loop. I told him at take a crack at it and see if i can help. The device does not go into recovery but it does go into download mode. The device does not power down and the battery eventually dies after many many boot loops. I tried to flash BOL1 as he told me that he was on 5.1.1, via odin (3.10.7)and it failed to flash. I was able to get a PIT file from within here:http://forum.xda-developers.com/sprint-galaxy-s6/help/help-galaxy-s6-sm-g920p-t3287963 so this is what i have noticed. If i flash the PIT file and reboot, the device goes into recovery. I then did a full wipe and cleared cache but the device keeps going into the boot loop. I see the samsung logo, then the green android screen and thats it as the device boot loops. I attempted to flash BOJ7 but it failed to flash. The way i can get a TAR file to flash is to flash the PIT file and then the TAR file but the device keeps going into the boot loop. I was able to flash both BOL1 and BOJ7 but experience the same results. I had the most success with BOJ7 after flashing twice but i had to place the device into download mode for me to flash a second time. The device made it past the first samsung screen, i saw the sammy splash screen and then it went into update 1 of 9.....made it to update 3 and then wham back to boot loop. That is as far as i got once I have also noticed that when i flash a TAR file when the device reboots i see the android screen loading the OS and it makes it about a quarter before it says "Erasing" and then the device goes into the boot loop. I have tried various BOL1 and BOJ7 files from the sammobile site and from within what i have found here at XDA but still no luck. I am not sure what else i can do which is why i am asking for help from you fine folks Any help is greatly appreciated.
****Resolved*****
flashed PIT and BOJ7 file from last update here http://forum.xda-developers.com/sprint-galaxy-s6/help/help-galaxy-s6-sm-g920p-t3287963 device still boot looped. I let it sit for a while and then just flashed BOJ7 again without the PIT. Let it boot loop again until BAM began to load. In all prob took about 20 mins of just letting it do its thing, who knew....
Did you try recover it via Smart Switch?
Hey all....I'm calling on the experts! I have a friend of mine's s8+ Sm-955U from Verizon. She woke up one morning and it was boot looping. I've tried using ODIN, reflashing the original rom, wiped cache, did a factory reset, and even used the pit file and repartition in ODIN to try to restore it. All it does is get stuck at the s8+ logo screen, goes black and you can feel a tiny vibration when it goes to black. It usually just sits there, sometimes it will just reboot over and over. I've done everything I know. Is it possible that the NAND would be bad? Or what wears out if it's hardware related? It boots just fine in recovery mode or download mode and ODIN always shows success when flashing. Anyone know of anything else to do?