6.0.1 AOSP green area in camera - Xperia Z1 Compact Q&A, Help & Troubleshooting

Hi,
I've build and installed AOSP 6.0.1 following the sonymobile instructions.
The phone boot perfectly and it seems that work ok were I've checked except from camera.
AOSP build has the generic android camera app and both cameras show a green band occuping all the left side of the screen. Is there any way to solve this?

you can start your journey here

Related

[Q] Using Roms 4.1.2 - codefireX & JellyTime : stripes on display issue

Hi everybody,
I have an annoying problem using roms based on Android 4.1.2 . I've tried codefireX and Jellytime. The same behavior has been noticed on both roms : there are main vertical thin stripes on the screen, falling from top to bottom, as if pixels were streaming. Most of stripes are visible on left and right parts of the screen, almost not in the middle. When I take a screenshot, problem is absolutely invisible. It can only be viewed on the touch screen directly.
When I tap on the sides of the phone, I have the impression that the stripes are lightly blinking or sparkling.
When I rotate the phone, stripes are not rotating. They still are going from the true top of the phone to the bottom.
And finaly, when I reinstall another rom, based on Android 4.0.4 (with or without Sense, suchas IceColdSandwich or ViperDHD), the stripes disappear.
Does anyone know anything about that ? or even heared something like that ?
Thanx a lot in advance,
Tom.
(sorry for my poor english )
TomVenom said:
Hi everybody,
I have an annoying problem using roms based on Android 4.1.2 . I've tried codefireX and Jellytime. The same behavior has been noticed on both roms : there are main vertical thin stripes on the screen, falling from top to bottom, as if pixels were streaming. Most of stripes are visible on left and right parts of the screen, almost not in the middle. When I take a screenshot, problem is absolutely invisible. It can only be viewed on the touch screen directly.
When I tap on the sides of the phone, I have the impression that the stripes are lightly blinking or sparkling.
When I rotate the phone, stripes are not rotating. They still are going from the true top of the phone to the bottom.
And finaly, when I reinstall another rom, based on Android 4.0.4 (with or without Sense, suchas IceColdSandwich or ViperDHD), the stripes disappear.
Does anyone know anything about that ? or even heared something like that ?
Thanx a lot in advance,
Tom.
(sorry for my poor english )[/QUOTE
Yes i have noticed that too. It seems to be a kernel issue not compatible with the phone. Forinstance if you flash lets say any 3.0.xx kernel onto icecoldICS rom you will get the lines just as in JB rom. Read that someone is trying to fix it so just keep your fingers x:crying:
Click to expand...
Click to collapse
AKK1983 said:
Yes i have noticed that too. It seems to be a kernel issue not compatible with the phone. Forinstance if you flash lets say any 3.0.xx kernel onto icecoldICS rom you will get the lines just as in JB rom. Read that someone is trying to fix it so just keep your fingers x:crying:
Click to expand...
Click to collapse
Hello,
thanks for your answer.
If it could be a kernel issue, why am I feeling so alone ?
Question about Kernels : is it possible to download Kernels Alternatives ?
TomVenom said:
Hello,
thanks for your answer.
If it could be a kernel issue, why am I feeling so alone ?
Click to expand...
Click to collapse
You are not alone. In JellyTime's issue tracker there is an open issue. Until now nothing changed. And with the new 4.2 release I wonder if JellyTime will get any stable updates in the near future. But that's the only place I found where the bug is reported. Is there an official codefireX bugtracker?
TomVenom said:
Hi everybody,
I have an annoying problem using roms based on Android 4.1.2 . I've tried codefireX and Jellytime. The same behavior has been noticed on both roms : there are main vertical thin stripes on the screen, falling from top to bottom, as if pixels were streaming. Most of stripes are visible on left and right parts of the screen, almost not in the middle. When I take a screenshot, problem is absolutely invisible. It can only be viewed on the touch screen directly.
When I tap on the sides of the phone, I have the impression that the stripes are lightly blinking or sparkling.
When I rotate the phone, stripes are not rotating. They still are going from the true top of the phone to the bottom.
And finaly, when I reinstall another rom, based on Android 4.0.4 (with or without Sense, suchas IceColdSandwich or ViperDHD), the stripes disappear.
Does anyone know anything about that ? or even heared something like that ?
Thanx a lot in advance,
Tom.
(sorry for my poor english )
Click to expand...
Click to collapse
"HW overlays cause graphical issues - in settings/developer options check disable hw overlays to fix"
I think you need this....try and gime me news:good:
Superuzzu said:
"HW overlays cause graphical issues - in settings/developer options check disable hw overlays to fix"
I think you need this....try and gime me news:good:
Click to expand...
Click to collapse
Even with HW overlays of u will still get the line. Even 4.2 has vertical lines bug! As said before its a bug which was introduced aftre 3.1 realise thus after 16th August. If u flash an older rom lets say rom builds before the 16th of August the bug is not present. I strongly doubt if the bug will b fixed cause it seems to afect only a few users and am one of them. I wander why RB pr synergy dont want to fix it
I know synergye was working on it and asking for logcats. I don't think he doesn't want to fix it. He might just not know how, since his device doesn't have the bug, and needs more info (like logcats).
bananagranola said:
I know synergye was working on it and asking for logcats. I don't think he doesn't want to fix it. He might just not know how, since his device doesn't have the bug, and needs more info (like logcats).
Click to expand...
Click to collapse
How do i produce the logcats and where fo i post them? And if am correct there should be a logcat about this on issues tracker. Its sad that we aren't able to enjoy these good roms cause of this bug. Really wish someone looks at it soon

HTC One X does not work with Android 4.2.2 camera and Sense5

Hello everyone!
I have a HTC One X after installing 4.2.2 & Sense rom cook 5 can not use Camera.
Although I have tried installing the rom different, but still did not improve.
Still having the same error with the camera Camera.Moi it back out.
Sorry people english is not my main language
pinbacninh_city said:
Hello everyone!
I have a HTC One X after installing 4.2.2 & Sense rom cook 5 can not use Camera.
Although I have tried installing the rom different, but still did not improve.
Still having the same error with the camera Camera.Moi it back out.
Sorry people english is not my main language
Click to expand...
Click to collapse
Is your G-sensor working (auto-rotation)?
It happens due to g-sensor issue
Not working on mine either, but works on 4.1.1 since its camera app doesn't require g-sensor
on 4.2.2 you can download an app camera jb which works perfectly fine.
HTC had delivered app update for camera problem in Sense 5 (4.2.2), but pls note that is for fixing camera only not for G-Sensor.
Download: Camera APK - http://d-h.st/PUd
How did this 4.2.2 software pass QA?
This phone would be awesome but it such a pos.
1st wifi and bluetooth signal not working properly, then home buttons failing to light, auto rotate failing and now the camera cuts out before you can take a picture.
Reseting phone at times has allowed the home buttons and auto rotate to work in the past so i assumed it was a software glitch, now i know for sure that htc are completely useless at QA and dont care about the customer.
Completely stock phone except the wifi mod to add a piece of wire which worked for wifi but bluetooth is still poor.
10 months to go til replacement time

[REQUEST] CyanogenMod 11 Update

Could someone somehow get cyanogenmod 11 for the N1? I am currently running CM 10.2 WPPH47N n1.
Observed issues in CM10.2 for the N1:
1. OTouch panel and OClick not working.
2. 3G/HSPA not working. Only 2G working.
3. When the camera is turned forward, the image seems flipped. When turned upside down the image is flipped again. Please refine the camera app so that when the camera is turned, the image comes straight.
I apologise if this is in the wrong thread, but I really wanted to get it out there. Thank you in advance.
Sent from my N1 using xda app-developers app
It certainly is not the right forum, moved.
It is out officially:
http://forum.xda-developers.com/showthread.php?t=2626235

[Q] Photosphere Camera black screen

After using CyanogenMod versions 9 through 10.2 I made the decision to switch to SlimRom and I am now running SlimKat 4.4.2 Build 4.1. During my entire time with CM, I had an easy time working with ported photosphere enabled camera apk's. However, upon the move to SlimRom, more specifically, the update to KitKat, the photosphere mode of the camera apk I had been using for several months was not working. Although I could take pictures with every other mode of the camera, whenever I switched to photosphere mode, the viewing screen would turn black, with all the rest of the UI working as normal. When I go to move it around, I can still see the dots for lining up the first photo, but it won't even let me take photos with this blacked out screen. I've attached a photo of the app in photosphere mode for better clarification, and I'd really appreciate if someone could help me out here.
Thanks in advance!
I have Slimkat as well. I do know the included Camera does not have Photosphere. If you are using a different app then please post a link so I can give it a whirl and post my findings.
Links
I have pm'ed you the links. My status as a new user prevents me from posting outside links
Yup got it. I will take a look and post back. Have you ever tried the Google Edition Camera ?
EDIT - I tried the Camera app from
http://downloadandroidrom.com/file/a...e/NewCameraApp[2].apk
It worked pretty well for me. I am on Slim-d2lte-4.4.2.build.4.4-WEEKLY-3771and KT747 Kernel.
Weird...that was the one that started me on my search for new photosphere apks...
I tried installing the GE one and saw your edit, tried that one again, without luck on either of them so I tried another full wipe, updated to that latest weekly and after a few reboots and system app changes, the GE one appears to work for me. No black screen, the images stitch well and I can view them afterwards, seems like its back to my expectations. Thank you very much.
Glad its working for you. Please see the note on Slim Rom's home page. Google has release a new Camera app. That's working wonders for me.
I will also try that.
tdiltdil27 said:
After using CyanogenMod versions 9 through 10.2 I made the decision to switch to SlimRom and I am now running SlimKat 4.4.2 Build 4.1. During my entire time with CM, I had an easy time working with ported photosphere enabled camera apk's. However, upon the move to SlimRom, more specifically, the update to KitKat, the photosphere mode of the camera apk I had been using for several months was not working. Although I could take pictures with every other mode of the camera, whenever I switched to photosphere mode, the viewing screen would turn black, with all the rest of the UI working as normal. When I go to move it around, I can still see the dots for lining up the first photo, but it won't even let me take photos with this blacked out screen. I've attached a photo of the app in photosphere mode for better clarification, and I'd really appreciate if someone could help me out here.
Thanks in advance!
Click to expand...
Click to collapse
I'm running into this exact same issue on the 2014-04-23-d2lte LiquidSmooth nightly using the new Google Camera. I clean flashed that and installed PA GApps Full + Keyboard. I wasn't running into this issue on PacMan Rom though, so I'm not sure what the issue is.
Missing or mismatched Libraries. Post on LS thread.
Perseus71 said:
Missing or mismatched Libraries. Post on LS thread.
Click to expand...
Click to collapse
I tried but I'm an XDA lurker. I need 10 total posts in order to post on that thread. This will be 8.

[Q] Camera issue M8 (no lastpass...)

Hello all,
First post, sorry its a question..
The back camera on M8 is making strange pictures, if any at all (see attachment).
Front camera is working fine.
Got my M8 for 1 year now, never had problems with the camera.
mm-qcamera-daemon is running high on batt usage.
Stock camera app will most of the time open and then close again, sometimes i can make strange pictures like above.
I don't have an other camera app running
It's rooted and i'm running
InsertCoin version 3.0.8
Android 4.4.2
HTC sense v6.0
HTC SDK API 6.17
I do know there are a lot of updates from the above versions. But its running so wel all these time that i don't need a upgrade (still up to 5 days on a full batt :good
I did clear the cache from the camera app, I don't have lastpass installed.
Does anyone seen a picture like this (except from a good/bad trip)? And how did they fix it.
All input is appreciated.
Thanks, Peter.
One of two things is going on. Either the camera module has gone bad OR you dont have the correct software to run the camera or that software has gone corrupt.
I see your running a custom rom so my suggestion would be go back to complete stock and re-test. If it fails its a hardware issue.
IAmSixNine said:
One of two things is going on. Either the camera module has gone bad OR you dont have the correct software to run the camera or that software has gone corrupt.
I see your running a custom rom so my suggestion would be go back to complete stock and re-test. If it fails its a hardware issue.
Click to expand...
Click to collapse
Thanks for your answer.
Do you have any clue if the same software is used for the front and back camera? Front is working perfect so that would mean a hardware issue.
I will start with returning to stock, quickest way to see if it's hardware related.
The camera modules are different. Back has ultra pixel and front is a megapixel.
Since its easier to change software it makes sense to go back to complete stock for testing. Then if it still fails its probably hardware.

Categories

Resources