Related
NT-7100 model.
So, I was trying out different ROMs on my phone last night and the one I ended up on before I went to sleep kept freezing a lot, so I ended up booting into recovery and I wiped everything a few times and then reflashed it. The one time I did this, it failed (I can't remember what it said) and I couldn't flash the file. I tried re-wiping everything, but nothing. I was pretty tired and must've hit reboot by mistake, because the next thing I know, I'm stuck on the Samsung boot screen.
Now, I can only go into downloading mode, but it currently says:
Product Name; (blank)
Custom Binary: No
Current Binary: Samsung Official
System Status: Custom
I can get it recognized on Odin (3.04), but whenever I try to flash stock ROM, it says one of two things: 1) (most common) Can't open serial (COM), and 2) (JUST happened as I was trying again to reflash) There is no PIT partition.
The second one is new, I assume I have to get a PIT file from somewhere to fix that?
The first one, if it comes back, how should I deal with that?
(Is it really bad that it doesn't have anything after Product Name? )
Thanks in advance. I'd really like to get this fixed up ASAP T_T
Hikiri said:
NT-7100 model.
So, I was trying out different ROMs on my phone last night and the one I ended up on before I went to sleep kept freezing a lot, so I ended up booting into recovery and I wiped everything a few times and then reflashed it. The one time I did this, it failed (I can't remember what it said) and I couldn't flash the file. I tried re-wiping everything, but nothing. I was pretty tired and must've hit reboot by mistake, because the next thing I know, I'm stuck on the Samsung boot screen.
Now, I can only go into downloading mode, but it currently says:
Product Name; (blank)
Custom Binary: No
Current Binary: Samsung Official
System Status: Custom
I can get it recognized on Odin (3.04), but whenever I try to flash stock ROM, it says one of two things: 1) (most common) Can't open serial (COM), and 2) (JUST happened as I was trying again to reflash) There is no PIT partition.
The second one is new, I assume I have to get a PIT file from somewhere to fix that?
The first one, if it comes back, how should I deal with that?
(Is it really bad that it doesn't have anything after Product Name? )
Thanks in advance. I'd really like to get this fixed up ASAP T_T
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1896696 try here post 4 has the pit file flash that then boot into download mode again and flash the stock rom
I actually found that a little bit before your response and I've been trying to flash it, but it either says it can't connect to serial (COM) or just fails and doesn't say why...ONE TIME it went to the "PIT for mapping" part and then just stalled for hours.
The serial one I assumed was drivers or just the USB port I was using, so I reinstalled the drivers and I've tried different ports, still no change.
The drivers didn't find any updates, but I assume there aren't really any?
Not really sure where to go from here... Is there something else that could be causing the serial thing?
EDIT: This is what it does when I restart download mode and immediately plug it into Odin and try to flash the PIT. It only does it the first time and then it sticks on SetupConnection.
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Hikiri said:
I actually found that a little bit before your response and I've been trying to flash it, but it either says it can't connect to serial (COM) or just fails and doesn't say why...ONE TIME it went to the "PIT for mapping" part and then just stalled for hours.
The serial one I assumed was drivers or just the USB port I was using, so I reinstalled the drivers and I've tried different ports, still no change.
The drivers didn't find any updates, but I assume there aren't really any?
Not really sure where to go from here... Is there something else that could be causing the serial thing?
EDIT: This is what it does when I restart download mode and immediately plug it into Odin and try to flash the PIT. It only does it the first time and then it sticks on SetupConnection.
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
well delete all old Samsung drivers and kies if any any remove all temp file left over restart you pc
install SAMSUNG_USB_Driver 1.5.23.0 stop the update from the right tray and it will install the drivers fine
now use odin 3.04 and right click as administrator (disable antivirus or any other conflicting drivers if you have any)
if this dont work and then try installing drivers through http://forum.xda-developers.com/showthread.php?t=1923956 here and see if it works but i blv the first one will get you ahead
if nothing works then try http://forum.xda-developers.com/showpost.php?p=32273406&postcount=5 rescue firmware from here the verison N7100XXDLJ2_OXA_FACTORY as it contain pit file too and go through the flashing process and selecting individual file for flash
shhbz said:
well delete all old Samsung drivers and kies if any any remove all temp file left over restart you pc
install SAMSUNG_USB_Driver 1.5.23.0 stop the update from the right tray and it will install the drivers fine
now use odin 3.04 and right click as administrator (disable antivirus or any other conflicting drivers if you have any)
if this dont work and then try installing drivers through http://forum.xda-developers.com/showthread.php?t=1923956 here and see if it works but i blv the first one will get you ahead
if nothing works then try http://forum.xda-developers.com/showpost.php?p=32273406&postcount=5 rescue firmware from here the verison N7100XXDLJ2_OXA_FACTORY as it contain pit file too and go through the flashing process and selecting individual file for flash
Click to expand...
Click to collapse
Well, I tried all of those and it didn't work. Still getting the same error as before, unless I reboot into downloading mode and immediately plug in the phone to the PC, in which case I get:
"<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
"
Every try after that says the serial error.
I assume that the main issue is the drivers not working right? It says it's been successfully installed and all of that, but then it's not connecting or something? You said to get rid of "temp files", how's the best way to go about that? That could be one of the issues, because I wasn't sure what you meant by that.
If the drivers don't end up working, is the only way to continue trying to fix it to go from a different computer?
Hikiri said:
Well, I tried all of those and it didn't work. Still getting the same error as before, unless I reboot into downloading mode and immediately plug in the phone to the PC, in which case I get:
"<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
"
Every try after that says the serial error.
I assume that the main issue is the drivers not working right? It says it's been successfully installed and all of that, but then it's not connecting or something? You said to get rid of "temp files", how's the best way to go about that? That could be one of the issues, because I wasn't sure what you meant by that.
If the drivers don't end up working, is the only way to continue trying to fix it to go from a different computer?
Click to expand...
Click to collapse
i bricked one last week and dr ketan helped me out, i think your drivers are fine. i had to plug in before opening odin, wipe data, wipe partition from recovery, flash pit, if it dont work try another, till pass, then flash with firmware together. double check with ketan. oh an make sure u use rear usb port. pit is in post 4 of his tut.
Hikiri said:
Well, I tried all of those and it didn't work. Still getting the same error as before, unless I reboot into downloading mode and immediately plug in the phone to the PC, in which case I get:
"<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
"
Every try after that says the serial error.
I assume that the main issue is the drivers not working right? It says it's been successfully installed and all of that, but then it's not connecting or something? You said to get rid of "temp files", how's the best way to go about that? That could be one of the issues, because I wasn't sure what you meant by that.
If the drivers don't end up working, is the only way to continue trying to fix it to go from a different computer?
Click to expand...
Click to collapse
use your uninstaller software to unistall your drivers as it delete all traces of file . then ccleaner to clean registry and click clean.
go to start menu-run -type %temp% press enter delete all . reboot and install drivers and use the driver version in mentioned and skip upgrade
at this point your driver install will be clean so it should pass the flash remember antivirus as it can block the operation too.
try the rescue firmware
Okay so here's what I did:
Uninstalled drivers and the program (add/remove programs in control panel and in device manager), deleted temp files, restarted computer, reinstalled drivers, not connected to internet so it didn't try to update, opened odin (3.07, from the toolkit) and plugged in the phone into the usb and then turned phone on into download mode, it said it was searching for drivers etc, recognized the phone, showed up in odin, put the pit+4 files from toolkit, and hit to flash.
Now, it's saying (set partition) above the COM 3, and it's hanging on "get pit for mapping.."
It shouldn't be taking a really long time, right? Cause I've heard it's nearly instant...
I'm not sure what the problem is cause it does this the first time, then goes back to the serial issue.
EDIT: This time, I redid everything again and tried Odin 3.04 and it said this:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<ID:0/003> Added!!
So, it skipped the "getting the PIT file" part, but it failed again. Should I try to do it without the PIT file or something? Like, it's always said that there was no PIT when I did that.
Okay, so I just tried to do everything on a different computer and still not working. Every time it comes up with "Get PIT for mapping" even though I add the PIT for flashing...
Does this mean that my phone is a lost cause? Or is there something else I can try?
My Samsung SM-T210R is in trouble . It all started after flashing a rom, I believe it was TranchidaKat v 4.3, However after that I have tried so many things that the start means little now.
Situation:
The tablet does not boot either to regular boot or into recovery. It actually appears pretty dead when trying, unless one pays attention to the back lighting of the screen.
Eventually I managed to consistently boot into download (actually ODIN) mode although without the large texting with the warnings and the instruction to press the up volume button (which I do nonetheless).
The report on screen upper left says:
ODIN MODE
PRODUCT NAME: SMT210R
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
HW REV: 0x5
From there attempting to flash a number of roms including stock fails. The MD5 checks are always successful. The failure modes are 2 different ones.
The first involves a PIT Partition missing. It happens when attempting to flash non stock roms
The second, flashing a stock rom (the latest: T210RUEU0COB1 and also: T210RUEAMK1 ) or also TWRP Recovery shows:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection.. (It hangs at this point for a very long time)
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I did a lot of searching for a pit file for my tablet model without coming up with it.
Can someone help me to solve this please?
untamed1 said:
My Samsung SM-T210R is in trouble . It all started after flashing a rom, I believe it was TranchidaKat v 4.3, However after that I have tried so many things that the start means little now.
Situation:
The tablet does not boot either to regular boot or into recovery. It actually appears pretty dead when trying, unless one pays attention to the back lighting of the screen.
Eventually I managed to consistently boot into download (actually ODIN) mode although without the large texting with the warnings and the instruction to press the up volume button (which I do nonetheless).
The report on screen upper left says:
ODIN MODE
PRODUCT NAME: SMT210R
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
HW REV: 0x5
From there attempting to flash a number of roms including stock fails. The MD5 checks are always successful. The failure modes are 2 different ones.
The first involves a PIT Partition missing. It happens when attempting to flash non stock roms
The second, flashing a stock rom (the latest: T210RUEU0COB1 and also: T210RUEAMK1 ) or also TWRP Recovery shows:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection.. (It hangs at this point for a very long time)
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I did a lot of searching for a pit file for my tablet model without coming up with it.
Can someone help me to solve this please?
Click to expand...
Click to collapse
Are you tried the search Funktion?
http://forum.xda-developers.com/showthread.php?t=2625163
Here are what you want.
bierma32 said:
Are you tried the search Funktion?
http://forum.xda-developers.com/showthread.php?t=2625163
Here are what you want.
Click to expand...
Click to collapse
Thank you for your response.
First if with search function you mean by using google, I have done a lot of of that, but so far with no luck.
I am pretty good with this stuff but not good enough. I would like to find someone who has either a lot of knowledge or has resolved a situation like mine and is willing to help.
The link you suggested is probably good, but does not totally relate to my situation. They had a working device they were simply trying to root. I instead don't have a working device and not even access to recovery mode. I don't even know right now what files and folders are on my device.
Thank you for the pit file though; now I have to find out whether repartitioning with it would be good, or whether it would push me down deeper in the hole.
You can also use the search Funktion here at this forum.
All wath you must do is simular to flash a recovery with Odin.
Download the Stockton from sammobile.com
Boot your tab into download mode
Startup odin
Check autoreboot , repartion and factory reset.
Under Pit you select the Pit.file
Under PDA you select your downloaded Stockrom what you have unziped,so that have a *.tar.md5 extension.
Press Start and Walt some minutes and the Tab will reboot.
bierma32 said:
You can also use the search Funktion here at this forum.
All wath you must do is simular to flash a recovery with Odin.
Download the Stockton from sammobile.com
Boot your tab into download mode
Startup odin
Check autoreboot , repartion and factory reset.
Under Pit you select the Pit.file
Under PDA you select your downloaded Stockrom what you have unziped,so that have a *.tar.md5 extension.
Press Start and Walt some minutes and the Tab will reboot.
Click to expand...
Click to collapse
Bierma32,
first of all thank you for spending the time to assist me it is very much appreciated. I followed your procedure and unfortunately it went nowhere fast. This is the report from Odin:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T210RUEU0COB1_T210RXAR0COB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
This is what happened earlier with the only difference being the "Set PIT file" command.
Any idea?
It looks like that Pit.file isnt working. Take a look in this link for a other Pit.file
http://forum.xda-developers.com/showthread.php?t=2722948
Hi. Im not able to help you, but im having issues aswell. I tried flashing some different things trying to root my device.. it seems it worked, but it never rooted it or anything even though my system status is Custom and the build number ****ing changed. Could you please tell me where you found your stocks for your device? To unroot.. i'd really appreciate it. I can't find any.
Rom's for Samsung Tab 3 7.0 SM-T210R
Doom1337 said:
Hi. Im not able to help you, but im having issues aswell. I tried flashing some different things trying to root my device.. it seems it worked, but it never rooted it or anything even though my system status is Custom and the build number ****ing changed. Could you please tell me where you found your stocks for your device? To unroot.. i'd really appreciate it. I can't find any.
Click to expand...
Click to collapse
For non stock ROM's:
http://forum.xda-developers.com/galaxy-tab-3/development-7
For Stock ROM's:
http://www.sammobile.com/firmwares/
For stock there are faster download sources also, do some google searching. By the way my issue has nothing to do with rooting.
bierma32 said:
It looks like that Pit.file isnt working. Take a look in this link for a other Pit.file
http://forum.xda-developers.com/showthread.php?t=2722948
Click to expand...
Click to collapse
I had found another PIT file as well, that looked very promising but did not work. I will try these two. Thanks.
:fingers-crossed:
Continuation
bierma32 said:
It looks like that Pit.file isnt working. Take a look in this link for a other Pit.file
http://forum.xda-developers.com/showthread.php?t=2722948
Click to expand...
Click to collapse
Tried both PIT files at that link with no success. Thanks for you help anyway. I am starting to loose hope and to wonder whether the problem is really not with the PIT file and partition tables. I just wish I knew linux.
untamed1 said:
Tried both PIT files at that link with no success. Thanks for you help anyway. I am starting to loose hope and to wonder whether the problem is really not with the PIT file and partition tables. I just wish I knew linux.
Click to expand...
Click to collapse
When you connect charger do tab shows battery charging.
If it shows then probably your kernel is working.
(i don't know about Samsung too much as they have download mode instead of fastboot.)
Sent from my D2212 using XDA Free mobile app
No battery picture
vinay said:
When you connect charger do tab shows battery charging.
If it shows then probably your kernel is working.
(i don't know about Samsung too much as they have download mode instead of fastboot.)
Sent from my D2212 using XDA Free mobile app
Click to expand...
Click to collapse
No, I am at a lower level than the kernel, I am sure. The only thing ever showing is the wording at the download mode screen.
Another curious thing that seems to be happening is that the battery seems to discharging or not charging since I can only enter download mode only while or after connecting the charger.
Any way thanks for your response.
untamed1 said:
No, I am at a lower level than the kernel, I am sure. The only thing ever showing is the wording at the download mode screen.
Another curious thing that seems to be happening is that the battery seems to discharging or not charging since I can only enter download mode only while or after connecting the charger.
Any way thanks for your response.
Click to expand...
Click to collapse
you just hard bricked your device.
but download mode is working so still a hope.(untill power end)
which version of odin are you using.?
I am using 3.06. Battery is not really a problem, other than for the unknown reason why it discharges or does not charge completely. I am questioning whether all the trial and errors I have done, since the issue occurred, may have caused some collateral damage. In any case, I can still start download mode after a short time charging
untamed1 said:
I am using 3.06. Battery is not really a problem, other than for the unknown reason why it discharges or does not charge completely. I am questioning whether all the trial and errors I have done, since the issue occurred, may have caused some collateral damage. In any case, I can still start download mode after a short time charging
Click to expand...
Click to collapse
When this happen.
What was you doing.
Like
Your tab was running you turned off and it won't turn on. Or you flashed a rom/kernel and it won't turn on.
Sent from my D2212 using XDA Free mobile app
Vinay, as I said in my first post...
. . . . . . . It all started after flashing a rom, I believe it was TranchidaKat v 4.3, However after that I have tried so many things that the start means little now.
Situation:
The tablet does not boot either to regular boot or into recovery. It actually appears pretty dead when trying, unless one pays attention to the back lighting of the screen.
Eventually I managed to consistently boot into download (actually ODIN) mode although without the large texting with the warnings and the instruction to press the up volume button (which I do nonetheless). . . . . . . . .
I hope you have some specific ideas or suggestions on what I can try. Without that I have pretty much given up.
untamed1 said:
Vinay, as I said in my first post...
. . . . . . . It all started after flashing a rom, I believe it was TranchidaKat v 4.3, However after that I have tried so many things that the start means little now.
Situation:
The tablet does not boot either to regular boot or into recovery. It actually appears pretty dead when trying, unless one pays attention to the back lighting of the screen.
Eventually I managed to consistently boot into download (actually ODIN) mode although without the large texting with the warnings and the instruction to press the up volume button (which I do nonetheless). . . . . . . . .
I hope you have some specific ideas or suggestions on what I can try. Without that I have pretty much given up.
Click to expand...
Click to collapse
First of all update your odin to 3.09 or higher if there is. And try flashing again.
(btw is that rom was made for your variant)
Sent from my Xperia E3 using XDA Free mobile app
same issue
i also have an unresponsive sm-t210r that has the OP's issues of a broken looking download screen, no boot and no recovery
pit file problems in odin and timeouts and now not postitive if my device made it to the 4.4.2 locked bootloader. looking to get it back to stock.
will help with files, time etc.
-ty
SOLVED
got my tab(SM-T210R) back up and running,,
been at it a few hours a day all this week,
kies firmware upgrade and initializaton somewhat didnt work. it installed it but always booted a black screen and backlight no sound. no vibiration,
so i am back to help the OP' and all others with this specific issue of dirty flashing directly to 4.4.2 from a rooted custom recovery tab3 that now have a messed up black screen problem but can still sneek into download mode thats looking all messed up> with the fallowing message
ODIN MODE
PRODUCT NAME: SMT210R
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
HW REV: 0x5
and then get PIT file errors and setup connection hangs.
please be shure you dont still have your custom recovery. you just have to hold home and vol+ ten seconds longer then usual after releasing the power button when the backlight appears. i thot i didnt have mine. until after i did this. now im just not shur if i held the buttons long enough then.
(if you need to get your current binary to offical please use odin's firmware and initialization process.. it will go thru and your binary will be changed to official but you will still have the black screen boot even though kies installed everything. proceed to next)
to get your brick back to being a useful loaf
this is what you need.
factory usb cable
odin 3.07
LT02.pit file from a 4.4.2 firmware (not 100%on that) ask me for the one i extracted if all eles fails
and T210.TWRP.2.8.0.0.tar.md5
start with opening odin
set your pit file and load the twrp recovery_
you want repartition checked for this (loading pit file should automatically fill the check box)
also autoreboot and f.reset time , checkboxes are checked
get your bricked device into download mode and connect
confirm odin sees the device and flash
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T210.TWRP.2.8.0.0.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
at this point within 15 seconds after the reboot i got a splash screen and it booted up into 4.4.2 checked the status, device status of custom.
restarts and power offs are safe at this point. just take 5 seconds longer than normal.
so now we have an operating tablet with recovery and a messed up but working download mode.
checked download mode screen STILL CORRUPTED with the same weird message
ODIN MODE
PRODUCT NAME: SMT210R
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
HW REV: 0x5
i checked for twrp to operate it did. just took longer to boot it
PLEASE DO NOT AT THIS POINT wipe everything. it only got me back to the black screen with no booting.
and not being able to odin the .md5 package stock firmwares
it put me back an hour to get back to where these instructions end.
if this happends to you run keis firmware and intialize, to get the stock package back in and return to the corrupted download mode to see binary samsung offical.. then continue my odin instructions.
FALLOW UP:
had some time to experiment. i got back to %100 official system/binary and normal download mode with the green android guy being back.
i had updated to the latest TWRP and rooted.
i then unrooted with the super su app
then with the new kies program called SMARTSWITCH i again did the firmware and initialize and it went through and booted. without a hitch.
try it then go ahead and check for stock recovery and android man in download mode
-your welcome
b.t.w it seems in all the mess im still HW-rev 0x5 and it never installed the knox warraty bit..., blessing in disguise?
if this works for people somebody wanna make a sticky and add it to a 4.4.2 unbricking guide?
be aware that this is what worked for me. if you feel a different recovery or pit file may work go ahead. this is my results and wont be held accountable for what happens to you.
> DISCLAIMER> TRY AT YOUR OWN RISK< I AM NOT RESPONSIBLE
kal swift said:
got my tab(SM-T210R) back up and running,,
been at it a few hours a day all this week,
kies firmware upgrade and initializaton somewhat didnt work. it installed it but always booted a black screen and backlight no sound. no vibiration,
so i am back to help the OP' and all others with this specific issue of dirty flashing directly to 4.4.2 from a rooted custom recovery tab3 that now have a messed up black screen problem but can still sneek into download mode thats looking all messed up> with the fallowing message
ODIN MODE
PRODUCT NAME: SMT210R
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
HW REV: 0x5
and then get PIT file errors and setup connection hangs.
please be shure you dont still have your custom recovery. you just have to hold home and vol+ ten seconds longer then usual after releasing the power button when the backlight appears. i thot i didnt have mine. until after i did this. now im just not shur if i held the buttons long enough then.
(if you need to get your current binary to offical please use odin's firmware and initialization process.. it will go thru and your binary will be changed to official but you will still have the black screen boot even though kies installed everything. proceed to next)
to get your brick back to being a useful loaf
this is what you need.
factory usb cable
odin 3.07
LT02.pit file from a 4.4.2 firmware (not 100%on that) ask me for the one i extracted if all eles fails
and T210.TWRP.2.8.0.0.tar.md5
start with opening odin
set your pit file and load the twrp recovery_
you want repartition checked for this (loading pit file should automatically fill the check box)
also autoreboot and f.reset time , checkboxes are checked
get your bricked device into download mode and connect
confirm odin sees the device and flash
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T210.TWRP.2.8.0.0.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
at this point within 15 seconds after the reboot i got a splash screen and it booted up into 4.4.2 checked the status, device status of custom.
restarts and power offs are safe at this point. just take 5 seconds longer than normal.
so now we have an operating tablet with recovery and a messed up but working download mode.
checked download mode screen STILL CORRUPTED with the same weird message
ODIN MODE
PRODUCT NAME: SMT210R
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
HW REV: 0x5
i checked for twrp to operate it did. just took longer to boot it
PLEASE DO NOT AT THIS POINT wipe everything. it only got me back to the black screen with no booting.
and not being able to odin the .md5 package stock firmwares
it put me back an hour to get back to where these instructions end.
if this happends to you run keis firmware and intialize, to get the stock package back in and return to the corrupted download mode to see binary samsung offical.. then continue my odin instructions.
FALLOW UP:
had some time to experiment. i got back to %100 official system/binary and normal download mode with the green android guy being back.
i had updated to the latest TWRP and rooted.
i then unrooted with the super su app
then with the new kies program called SMARTSWITCH i again did the firmware and initialize and it went through and booted. without a hitch.
try it then go ahead and check for stock recovery and android man in download mode
-your welcome
b.t.w it seems in all the mess im still HW-rev 0x5 and it never installed the knox warraty bit..., blessing in disguise?
if this works for people somebody wanna make a sticky and add it to a 4.4.2 unbricking guide?
be aware that this is what worked for me. if you feel a different recovery or pit file may work go ahead. this is my results and wont be held accountable for what happens to you.
> DISCLAIMER> TRY AT YOUR OWN RISK< I AM NOT RESPONSIBLE
Click to expand...
Click to collapse
I still cant get it working, i keep getting stuck with it saying it doesnt have a pit file even when i try to load it
I have a problem with my Tab3. When i am in download mode all i get is this. See picture.
I had a problem that the tab always reboots into recovery. So i want to flash a stock firmware. Any ideas?
same issue.
Erik1805 said:
I have a problem with my Tab3. When i am in download mode all i get is this. See picture.
I had a problem that the tab always reboots into recovery. So i want to flash a stock firmware. Any ideas?
Click to expand...
Click to collapse
i have come to a similar dead end.
came from fastdreamV6 rom and odin'd in T210RUEU0COB1_T210RXAC0COB1_HOME .tar .md5
pardon my terminology but i guess you'd say i dirty Odin'd it?> did not wipe or revert.
its where things went wroung for me
soo any ways.. looking for helpful and knowledageble people to begin trouble shooting this issue
after the install it rebooted and showed the tab3 splash screen then android package installer full screen before an OS. when the page installer screen disappeared that was the end of any responsiveness from the device.
mine always boots to black screen. no recovery , no audible/visual anything until odin mode.
always a black screen until i walk through the odin/download mode key' sequence blind
i have only half of what should look like a odin/download mode screen, the android guy has disappeared.
WIN7 does find the tab3 thats in [email protected]$$ odin mode in the device manager
odin also sees the tab3 but odin doesnt want to work to upload anything < hangs at setupconnection.. or pit mapping failed even when i have the new pit file being pushed,
ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
hemidall gives me communication conflicts
adb .. i currently have no os on the tablet as far as i can tell. maybe somebody can tell me if i can fastboot a command to push a recovery into it. but without adb-communication. i dont see it happening?
i presume i have a corrupted .pit file thats its not allowing me to replace.
OR KITKAT needs its own .pit file and i will need help aquiring one.
or its just a really bad flash alltogether. being boot.img. system img. recover img
how should i proceed if there is a way ? looking to get back to stock 4.4.2.
i can solder and make a usb jig if nessasary.
1 week later; further developments and workaround to boot here:
http://forum.xda-developers.com/gal...ably-hard-bricked-t3057440/page2#post60682636
What I have is a SM-T800 Wifi Samsung Galaxy Tab S 10.5. Below what odin mode states:
Product Name: SM-T800
Current Binary: Samsung Official
System status: Official
Secure Download: Enabled
KNOX WARRANTY VOID: 0 (0x0000)
RP SWREV: A1
On to the problem: Device stuck at "Samsung Galaxy Tab S" (bootloop). It also will not boot into recovery. It will, however, boot into download mode. Therefore, I booted it into download mode, hooked it up to Odin 3.09, downloaded the latest stock firmware from sammobile, and attempted to flash via Odin. Latest Samsung drivers (1.5.55.0) are installed, and Odin definitely recognizes the device. However Odin always stuck at initialization. I have research and it sounded like the "Half SDS" symptoms in that thread (You cannot boot into android or recovery. It fails at the boot screen, but the screen does turn on none-the-less. The only; thing you can do is top boot into Download mode.).
I have been researching this problem for a while now (2 days and one very late night) and I have read all sorts of threads ( http://forum.xda-developers.com/galaxy-tab-s/help/to-event-soft-brick-disaster-t2838473/post54618555#post54618555 , http://forum.xda-developers.com/galaxy-tab-s/help/how-to-unbrick-tablet-model-t800-t2863246 , http://forum.xda-developers.com/galaxy-tab-s/help/mannage-to-soft-brick-t3025447 , http://theunlockr.com/2014/08/09/how-to-unroot-the-samsung-galaxy-tab-s-10-5-wifi/ , http://forum.xda-developers.com/galaxy-tab-s/help/wiped-accident-t2832346 , http://forum.xda-developers.com/galaxy-tab-s/help/stuck-sudden-bootloop-t3067280/) from forums in every corner of the Internet, but I'm still completely stuck. Any help is greatly appreciated.
What I have done so far and the results:
1. Kies 3 = Input Model & SN then selected firmware update and initialisation. Download then when come to software update and initialization, the progress stuck at 0% for forever.
2. Smart switch = same result as Kies 3.
3. ADB_fastboot = It would not list samsung device.
4. TWRP (twrp-2.8.7.0-chagallwifi.img.tar) = odin stuck initialization
5. Odin 1.85, 3.04, 3.07, 3.09, 3.10.6 (T800XXU1BOJ1_T800XAR1BOJ1_HOME.tar) -> stuck initialization. I also downloaded PIT from ( http://forum.xda-developers.com/galaxy-tab-s/help/t800-pit-file-t2818817) and try repartition but still got same result. Also Kies is not running the background during my Odin attempts.
For the record, I don't know any details about the exact version of Android the tablet ran before it failed (I bought this tablet online used). I also used OEM cable then swapped with 4 other cables and switch between window 8.1 and 7 pc. Switched USB ports (Used USB 3.0 and 2.0 ports).
Does stock SM-T800 Tablet has locked bootloader? Do I have to try bootchain? I'm at the end of my wits. Short of an actual eMMC failure, I can't see any reason why this tablet would be permanently hard bricked or why ODIN refuses to cooperate. Can anyone suggest anything?
Finally I have submitted a repair ticket with Samsung but my device is 1yr 4 months old so no warranty. However I check the warranty for my tablet (via http://imeidata.net/warranty/samsung) and it say its has Factory Warranty Coverage until October 31, 2016. What does that mean and would that cover anything with regard to my problem?
P.S. Sorry for long post.
Never has KIES on my PC, only the samsuns and usb driver installed. (only my way) Also for my HTC devices i ever only install the drivers, because of there are complications with ADB, flashing, etc. if you have the HTC Device Manager on your PC. Perhaps for samsung is the same. But I don't know.
I have also used Odin3_v3.10.6. for flashing recovery, but I and many other user here use TWRP 2.8.7.2 from @ashyx .
For command line search for Heimdall. A tool made for Linux user but works also on Win.
First things first. You need to post a screen shot of odin when it fails so we can assess the situation.
@ashyx, thanks for you help.
ashyx said:
First things first. You need to post a screen shot of odin when it fails so we can assess the situation.
Click to expand...
Click to collapse
Thank you for responding.
Newbie to this forum. I don't see attachment icon on desktop version . When I select insert image, it ask for URL and I can't add outside link? I have try it on old tablet and firefox and chrome. Is it because I need to have 10 posts before I can add picture?
I'll research more how to add picture.
Anyways here the Odin log:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T800XXU1BOJ1_T800XAR1BOJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004>
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
OK, which version of odin are you using and which slot have you placed the firmware file in?
ashyx said:
OK, which version of odin are you using and which slot have you placed the firmware file in?
Click to expand...
Click to collapse
I have used alot of odin version (v1.85, 3.04, 3.07, 3.09, latest 3.10.6). I put the md5 file in the AP/PDA slot. I downloaded the T800XXU1BOJ1_T800XAR1BOJ1_HOME.tar.md5 from sammobile.com with XAR (which I confirmed with Kies 3).
I have the exact same problem with T700 and I'm running out of ideas!
Any luck??
Sorry mate, in my instance there was nothing left that could be done on my end. I finally send it to samsung repair service last week and they repaired for me (under warranty luckily). Apperantly it was hardware failure, they replaced the whole PBA. I suggest talking with samsung tech at best buy or something to see if you can do the same. If you don't have warranty you might need to pay for the repair. Again sorry to be bearer of bad news cause I was in same boat as well. Good luck.
Ditto the symptoms on an 18 month old SMT800.
Same thing for me on my SM-T805.
Odin 3.10.7 says the following:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
there it's stuck forever.
I've tried twrp_3.0.2-1_sm_t805.tar as well as CF-Auto-Root-chagalllte-chagallltexx-smt805.tar.md5 (Odin -> AP).
I've tried different USB cables and PCs on top of that.
Latest Samsung drivers are installed (1.5.51.0).
Somewhere I read that it helps to unplug the battery beforehand. Did anyone try that yet?
I'm kind of hesitant to disassemble my tablet, but may try it soon as last resort. My warranty is already void/expired anyway.
Cheers
Michael
Phear666 said:
Same thing for me on my SM-T805.
Odin 3.10.7 says the following:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
there it's stuck forever.
I've tried twrp_3.0.2-1_sm_t805.tar as well as CF-Auto-Root-chagalllte-chagallltexx-smt805.tar.md5 (Odin -> AP).
I've tried different USB cables and PCs on top of that.
Latest Samsung drivers are installed (1.5.51.0).
Somewhere I read that it helps to unplug the battery beforehand. Did anyone try that yet?
I'm kind of hesitant to disassemble my tablet, but may try it soon as last resort. My warranty is already void/expired anyway.
Cheers
Michael
Click to expand...
Click to collapse
Put it in download mode.
ashyx said:
Put it in download mode.
Click to expand...
Click to collapse
the device was in download mode (Vol Down+Home+Power, on warning screen Vol Up)... That's why I even tried to rule out connection issues by trying different USB cables, USB ports and different PCs.
Is anyone able to point me in the right direction or is willing to make one?
The i747 does not have a stock 5.1.1 rom; therefore, there is no debrick image for a 5.1.1 rom.
What bootloader is on the phone? Did any of the images from the debrick thread boot the phone?
Does installing 5.1 change your bootloader?
As in Cyanogenmod 12.1?
Softbricked my S3, and I'm not sure which way to attempt to recover/debrick & would appreciate any advice.
SGH I747 (ATT)
rooted 2 years ago just after 4.3 OTA updated, flashed with CM 11.
Had that on there for almost a year, got bored & installed carbonrom.
Beginning of december, flashed CM 12.1.
A week ago it got stuck on the boot logo.
Still able to get into both Recovery & download modes.
Clockwork mod 6.0.4.7
trying to flash from a new image or wipe & factory restore both give me
Code:
detected file system ext4 for /dev/block/platform/msm_sdcc.1/by-name/system
patching unconditionally
E: error in /storage/sdcard1/cm-12.1-201511117-sna[status 0] installation aborted
trying to use Odin, it gives me
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
but never does anything, even hours later.
At unplug, I get
Code:
<ID:0/003> __Xmit Write fail
<ID:0/003> XmitData Fail..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
The info on the download screen is
Code:
odin mode
product name: sgh-i747
custom binary download: yes (6 counts)
current binary: custom
system status: custom
qualcomm secureboot: enable
warranty bit: 1
bootloader ap swrev: 2
My guess from another thread is that the /system and /data partitions are not wiped properly, causing those partitions to be formatted with read-only (R/O) permissions rather than read-write (R/W)? But those files are definitely not right for my phone, so what now?
Use twrp to as cwm is out of date. Once on twrp, you can try flashing cm12.1 again.
Flashing a custom rom via twrp does not touch the bootloader or modem.
Do not flash any files via Odin as doing so could result in a hard brick. Once the phone is on a 4.3 or newer bootloader, Odin cannot be used.
audit13 said:
Use twrp to as cwm is out of date. Once on twrp, you can try flashing cm12.1 again.
Flashing a custom rom via twrp does not touch the bootloader or modem.
Do not flash any files via Odin as doing so could result in a hard brick. Once the phone is on a 4.3 or newer bootloader, Odin cannot be used.
Click to expand...
Click to collapse
Good to know.
Thanks.
But how do I get twrp onto the phone?
was actually trying to put twrp on with odin, but that's not working.
The downloads I've seen are for:
app-phone doesnt boot
odin- aint working
TWRP Install - Requires TWRP 2.8.4 or higher already installed
dd Install Method - oh, didn't see that one. I'll try that & let you know.:laugh:
---------- Post added at 06:54 AM ---------- Previous post was at 06:16 AM ----------
well, I'm not figuring it out....
As per the twrp page, tried: dd if=/sdcard/twrp-2.8.7.0-d2att.img of=/dev/block/mmcblk0p18
file not found error
tried: dd if=/storage/sdcard1/twrp-2.8.7.0-d2att.img of=/dev/block/mmcblk0p18
file not found error
did ls (hey it's like linux!)
got possible locations: external_sd, sd-ext, sdcard, also looked under mnt.
file not found error
cd'ed & ls'ed to /storage/sdcard1/ there it frickken is!
ran the command there, sans path, and still get file not found error
arrrrgh.
Try this:
1) download Odin 3.07 from here: https://www.google.ca/url?sa=t&rct=j...07763241,d.dmo
2) download the tar version of TWRP 2.8.7.0 from here: https://dl.twrp.me/d2att/
3) download the latest cm12.1 for the phone from here ( http://www.cmxlog.com/12.1/d2att/) and save it to a micro SD card;
4) download the version of cm12.1 gapps you want from here (https://wiki.cyanogenmod.org/w/Google_Apps) and save it to the same sd card where you saved CM12.1;
5) place the micro SD card into the phone;
6) boot the phone into download mode;
7) open Odin 3.07 and uncheck everything except f. reset time;
8) click on PDA and browse to the tar TWRP file and select it;
9) connect the phone and it should show up as a com port in Odin;
10) flash TWRP;
11) when you see the word RESET in the status window, remove the USB cable, remove the battery, replace the battery, use the button combination to get into recovery which should now be TWRP;
12) perform a full wipe of system, data, and cache;
13) flash CM12.1 and gapps from the micro SD card;
14) reboot and enjoy
very detailed response, thanks. I've tried most of that, as some thread I was reading said that twrp probably has the capability to fix the issue, and CWM definitely doesn't.
Odin never really does anything, though. How long should I wait?
This step is the one I haven't done "7) open Odin 3.07 and uncheck everything except f. reset time;" Just left everything alone the multiple times I tried. Hopefully that'll make a difference.
Tried 3.07, 3.09, 3.10.6. I'll try again.
By default in Odin 3.07, only auto reboot and f reset time are checked.
What do you mean when you say Odin does nothing? Does the phone appear as a com device in Odin? Are there error messages in Odin during the flash process?
never gives anything other than:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
not at a windows computer for a couple days. stuck on linux mint with no internet. has heimdall & adb, though....
have twrp img & tar, cm12.1, and gapps on the sdcard.
All I can suggest is to try and get access to a pc or try VMware with win7.
Tried again last night for about 12 hours, no response from Odin.
Decided to give jtag a shot.
Contacted the jtag guy & gave him all the above info.
He says
"Unfortunately there are many indicators that your phone has a hardware failure.... Most likely a failed emmc memory chip.
1) the phone getting stuck on boot logo for no reason.
2) Odin not flashing...
3) files not found or... Not being able to do.
These are all indicators that the emmc memory chip is toast...... The biggest clue is finding the phone stuck on boot logo... Out of nowhere for no reason.
Jtag would not be able to fix it.
Thank you"
:crying::crying::crying::crying::crying::crying:
Thanks for the help.
Might sell the remains.
16G I747 blue, normal wear & tear, small chip in one corner, the case covers it.
2 stock batteries
1 7800mah best4power battery
1 otterbox defender modified to hold extended battery without the turtleback
any offers?
i suggest trying on a Windows machine before giving up. I am not convinced the memory is damaged.
That was on a windows machine...
Odin recognizes the phone but it won't flash twrp? Have you tried different USB cables and USB ports?
I found that my s4 and s3 would fail to flash if I don't use the USB cable that came with my Samsung or LG phones.
yes to both cable & ports.
bought an LG K7, which I mostly hate, and can not root.
keeping my S3, looking for someplace cheap to replace the chip.
I bought my lg k7 today(LGMS330)metropcs i rooted it in 2 mins.with xda's KINGROOT..then removed Kingroot with WOLFDROIDS script...and now im running BUSYBOX STERICSON 1.24.1 and ChainFires SUPERSU 2.49..IT KILLS me when people cant root there devices...i did this ALL in the BURGERKING BATHROOM GOIN BOO BOO
Ok so i rooted my darn k7 ...but like a jackars i bricked it...no TWRP...NO KDZ FIRMWARE...CAN ANYONE PLEASE ...PRETTY PLEASE SEND ME A LINK TO THE METROPCS variant of the LG K7 (TRIBUTE 5) KDZ STOCK FIRMWARE..I JUST BOUGHT A $150 ELECTRONIC PAPERWEIGHT...the k7 is so new there is no support anywhere...in fact all u really find is the ads for the debut of the device in stores ...major noob mistake..im truly embarassed..PLZ HELP
yeah, got it rooted. was missing the "enable oem unlock" step. d'oh.
thanks for the tip on the script.
no idea on the firmware. if you find one, let me know.
just got a $150 paperweight...lg ms330 i do hate you now...
o4tuna said:
yeah, got it rooted. was missing the "enable oem unlock" step. d'oh.
thanks for the tip on the script.
no idea on the firmware. if you find one, let me know.
Click to expand...
Click to collapse
I'm in the same boat as you...unfortunately tht step was completely left out in the directions I used so I now have a $150 paper weight as well....if anyone finds the stock firmware plz plz plzzzzzz let me know I would be forever gratefull....
AbErCrMbPlAyA said:
I'm in the same boat as you...unfortunately tht step was completely left out in the directions I used so I now have a $150 paper weight as well....if anyone finds the stock firmware plz plz plzzzzzz let me know I would be forever gratefull....
Click to expand...
Click to collapse
I had a amazing talk with the lg develeopers yesterday....since I am in the same boat since my lg k7 is bricked....I ask them for the kdz firmware so I can reflash my phone....you wanna know what they told me?
first they ask: whats a kdz file?
their answer: We don't make those thing you need the official lg tools to update your device firmware....so we cant help you...
Me: I am extremely pissed now since they are lying to me & then I showed them a link from their server to DOWNLOAD a kdz file firmware for another device that I had....
their answer: we dont know what you are talking about...sorry we can't help you!
I even went to my nearby metropcs store & explained to him what happen...
first. he didn't understand the following:
1-bootloader
2. boot image
3. recovery mode
4. download mode
5. kdz firmware
6. bricked & softed-bricked
the f-cking guy told me I can't do anything, but "report my phone lost or stolen" so I can get a new one....
How the hell are these idiots getting jobs when they have NO IDEA what to do on how to fix a phone
My level of anger is now over 9000.....