Dear friends,
My canvas 4 mobile is stuck at booting image. rezone I rooted it and it works good for 2 days later I installed 3D Chainefire. and run it goes to reboot and stuck at boot logo.
I removed battery and and power on again its stuck at boot logo, I did it fo r 2 time doest work any.
then I go to recover mode as our forum suggested me and wipe the data/restore program and try to update custom ram speed Rebirth but its come ABORTED and I try it for 2 times, doesn't works.
then I tried even to flash the ROM. with Sp flash tool and MT6589_Android_scatter_emmc, But my phone not recognizes at all.
please help me to find out solution.
chejetikoti said:
Dear friends,
My canvas 4 mobile is stuck at booting image. rezone I rooted it and it works good for 2 days later I installed 3D Chainefire. and run it goes to reboot and stuck at boot logo.
I removed battery and and power on again its stuck at boot logo, I did it fo r 2 time doest work any.
then I go to recover mode as our forum suggested me and wipe the data/restore program and try to update custom ram speed Rebirth but its come ABORTED and I try it for 2 times, doesn't works.
then I tried even to flash the ROM. with Sp flash tool and MT6589_Android_scatter_emmc, But my phone not recognizes at all.
please help me to find out solution.
Click to expand...
Click to collapse
first full charge your phone,downlaod orignal stock rom, make you sure your mobile driver correctly installed in your pc,and then flash with sp flash tool. more for information try this procedure :
http://forum.xda-developers.com/canvas-4/general/guide-flashing-guide-sp-flash-tool-t2745892
---------- Post added at 09:31 AM ---------- Previous post was at 09:24 AM ----------
chejetikoti said:
Dear friends,
My canvas 4 mobile is stuck at booting image. rezone I rooted it and it works good for 2 days later I installed 3D Chainefire. and run it goes to reboot and stuck at boot logo.
I removed battery and and power on again its stuck at boot logo, I did it fo r 2 time doest work any.
then I go to recover mode as our forum suggested me and wipe the data/restore program and try to update custom ram speed Rebirth but its come ABORTED and I try it for 2 times, doesn't works.
then I tried even to flash the ROM. with Sp flash tool and MT6589_Android_scatter_emmc, But my phone not recognizes at all.
please help me to find out solution.
Click to expand...
Click to collapse
if you face connection problem with SP flash tools...then try this driver (install in your pc)
http://d-h.st/xkW
thank you.
007jigar said:
first full charge your phone,downlaod orignal stock rom, make you sure your mobile driver correctly installed in your pc,and then flash with sp flash tool. more for information try this procedure :
http://forum.xda-developers.com/canvas-4/general/guide-flashing-guide-sp-flash-tool-t2745892
---------- Post added at 09:31 AM ---------- Previous post was at 09:24 AM ----------
if you face connection problem with SP flash tools...then try this driver (install in your pc)
http://d-h.st/xkW
Click to expand...
Click to collapse
thank you so much, now its working I tried with new driver, so its done
Now I am facing new problem, with my WCDMA only mode,.. after flashing if I select WCDMA only mode network getting disconnected and showing Cross mork on indicater, previously I used WCDMA only mode on same mobile with same sim, I am using aircel Karnataka , and I am staying in Bangalore.. ANY Solutions for it,..
chejetikoti said:
Now I am facing new problem, with my WCDMA only mode,.. after flashing if I select WCDMA only mode network getting disconnected and showing Cross mork on indicater, previously I used WCDMA only mode on same mobile with same sim, I am using aircel Karnataka , and I am staying in Bangalore.. ANY Solutions for it,..
Click to expand...
Click to collapse
if you using stock rom...then take hard reset your phone...reinsert your sim.
I did hard reset and removed and inserted sim again, but still I am facing same problem. every time when I do hard Reset My mobile IMEI Numbers are Going to INVALID... why?
ok so the main issue is the IMEI number....are you backup your IMEI number ? try this i think it's help you
http://forum.xda-developers.com/showthread.php?t=2380700
yeh i am doing this always when do hard reset
007jigar said:
ok so the main issue is the IMEI number....are you backup your IMEI number ? try this i think it's help you
http://forum.xda-developers.com/showthread.php?t=2380700
Click to expand...
Click to collapse
I am doing this every time,, but after that only I am getting the WCDMA only not working problem, if I select network ball will crossed, no network for it, I checked the same sim in other mobile its working properly
IMEI number successfully installed or not? check the stock rom properly downloaded on your pc or not? again flash the stock rom...Actually i am alos NEWBIE..and i faced some soft-break problem in canvas...but the problem successfully solved with to flash the stock rom...so try it
007jigar said:
IMEI number successfully installed or not? check the stock rom properly downloaded on your pc or not? again flash the stock rom...Actually i am alos NEWBIE..and i faced some soft-break problem in canvas...but the problem successfully solved with to flash the stock rom...so try it
Click to expand...
Click to collapse
IMEI NUMBERS installing is successful I will try again to flash my phone again may ne it will work properly
installation aborted status 7
Plzz help me out guyzzz I tried to install this rom but it was showing error as installation aborted status 7
Now my phone is stuck on the logo plzz help me wat to do
Micromax q334
I face same problem on my micromax q334 please send driver link for my phone urgent.
So after hard resetting the phone wipe data/cache doesn't seem to work it just sits in the load screen with the white circle. I left it there for about 20 minutes but still nothing happens. This happend after the latest update and the device was rooted before the hard reset . Please help me ...
Does this help http://forum.xda-developers.com/showthread.php?t=3122998
Sent from my ASUS_Z00AD using XDA Free mobile app
SOLVED
Found the solution i just entered Recovery Mode and selected update through ADB(after hard resetting it), connected phone to pc ,downloaded the latest update from asus support site and intel drivers and installed the update with ADB Fastboot Tool. Phone is like a brand new .
how can you updated with ADB Fastboot Tool? my phone is stuk in the load screen
Hi, guys.I've rooted my Canvas Android One using Kingroot. Now I choosed to unroot the device. When I restarted the device, it is not booting up. Only the Micromax logo appears
since i have rooted my canvas a1 which was runing on marshmallow 6.0 i have facing some problems but now it has become a big problem because my phone is stucking in the middle of bootup right after the micromax logo and i have reset the phone many times from recovery mode but this is not working please seggest some thing :crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
exactly the same problem but it was when i was using lollipop only!
please help!!!!!:crying:
shashikant singh said:
since i have rooted my canvas a1 which was runing on marshmallow 6.0 i have facing some problems but now it has become a big problem because my phone is stucking in the middle of bootup right after the micromax logo and i have reset the phone many times from recovery mode but this is not working please seggest some thing :crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
For marshmallow, you have to flash custom kernel before rooting..
Check this thread: Root Marshmallow Android One
darkslayer_a said:
exactly the same problem but it was when i was using lollipop only!
please help!!!!!:crying:
Click to expand...
Click to collapse
You have to just flash SuperSu zip from custom recovery..
That will definitely work
shashikant singh said:
since i have rooted my canvas a1 which was runing on marshmallow 6.0 i have facing some problems but now it has become a big problem because my phone is stucking in the middle of bootup right after the micromax logo and i have reset the phone many times from recovery mode but this is not working please seggest some thing :crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
i also got the same problem......can u plz tell me how u resolve this problem plz bro.....
i don't know where my phone is rooted or not........plz tell me solutions fast for rooted one as well as unrooted bro.....
my canvas a1 android one ( lollipop verison ) rooted by kingroot . and root is successful . and work good....But when i do factory reset data , its stuck on Micromax logo..I remove battry then I replace and switch on its work normally ...but i will do to factory reset my phone its stuck...otherwise its good... ( my phone is rooted buy kingroot ) i don't know what is the probelm ? ( Some days ago i download twrp app from gplay and run it..this make any probelm ? )
Sent from my Micromax AQ4502 using XDA Free mobile app