Hello,
I have bought n7 N930FD dual sim.
In system languages, I only have 10 languages.
1. How can i add more languages? I want to have my native language
2. since my region is different how can iI try to get autonomic OTA?
3. If I Odin flush my region firmware an "N930F" on my "N930FD" , will i loose OTA and dual sim functuality?
Thank you
you have to flash another ROM that contains your language. http://www.sammobile.com/firmwares/database/SM-N930F/
Strange. Same model but with more than 10. What are your current PDA and CSC?
y2kkingboy said:
Strange. Same model but with more than 10. What are your current PDA and CSC?
Click to expand...
Click to collapse
Cant see my language in the list you sent me.....
taiseer999 said:
you have to flash another ROM that contains your language. http://www.sammobile.com/firmwares/database/SM-N930F/
Click to expand...
Click to collapse
If I Odin flush my region firmware an "N930F" on my "N930FD" , will i loose OTA and dual sim functuality?
karelson said:
If I Odin flush my region firmware an "N930F" on my "N930FD" , will i loose OTA and dual sim functuality?
Click to expand...
Click to collapse
You will be reciveing OTAs from the new CSC code flashed, just make sure you factory reset your phone to ensure OTA future receiving.
So in other words it is completely safe to flash N930F firmware over the FD phone from other region bearing in mind it needs to be factory reset, correct? Will I lose dual sim feature?
boober78 said:
So in other words it is completely safe to flash N930F firmware over the FD phone from other region bearing in mind it needs to be factory reset, correct? Will I lose dual sim feature?
Click to expand...
Click to collapse
Well. Sammobile doesn't have a ROM list for FD. So I guess you have no choice but to use F.
Edit:
I checked my PDA and CSC on sammobile and found my ROM under the F ROM list.
i have a similar question, if i flash a 930f firmware over a 930fd device then ill have any issue flashing 930f roms in my 930fd device? i dont care about dual sim.
y2kkingboy said:
Strange. Same model but with more than 10. What are your current PDA and CSC?
Click to expand...
Click to collapse
Witch version you use?
Regards
galarond said:
i have a similar question, if i flash a 930f firmware over a 930fd device then ill have any issue flashing 930f roms in my 930fd device? i dont care about dual sim.
Click to expand...
Click to collapse
There is no separate ROM for the FD. It is the same ROM of the single SIM F model.
The ROM will automatically configure itself to work with the device accordingly.
---------- Post added at 07:29 AM ---------- Previous post was at 07:28 AM ----------
CACV said:
Witch version you use?
Regards
Click to expand...
Click to collapse
What do you mean by version?
y2kkingboy said:
There is no separate ROM for the FD. It is the same ROM of the single SIM F model.
The ROM will automatically configure itself to work with the device accordingly.
---------- Post added at 07:29 AM ---------- Previous post was at 07:28 AM ----------
What do you mean by version?
Click to expand...
Click to collapse
there is this: http://www.sammobile.com/firmwares/database/SM-G930FD/
I do care about the dual sim, so if there is some one with "FD" phone who flushed F version , please confirm?
karelson said:
there is this: http://www.sammobile.com/firmwares/database/SM-G930FD/
I do care about the dual sim, so if there is some one with "FD" phone who flushed F version , please confirm?
Click to expand...
Click to collapse
This url is for the S7 Duos. G930 is S7. N930 is Note 7.
To further clear it out for you.
This is the url you should be looking for. http://www.sammobile.com/firmwares/database/SM-N930F/
Here are screenshots where it shows the firmware installed on my N7 Duos.
y2kkingboy said:
This url is for the S7 Duos. G930 is S7. N930 is Note 7.
To further clear it out for you.
This is the url you should be looking for. http://www.sammobile.com/firmwares/database/SM-N930F/
Here are screenshots where it shows the firmware installed on my N7 Duos.
Click to expand...
Click to collapse
You are right!!!
I did not see that...and i did that search many times.
So i can flush "F" on "FD"? or this mean Samsung did not yet release FD firmware?
By the way your screenshot is of the stock or did you flushed ROM?
karelson said:
You are right!!!
I did not see that...and i did that search many times.
So i can flush "F" on "FD"? or this mean Samsung did not yet release FD firmware?
By the way your screenshot is of the stock or did you flushed ROM?
Click to expand...
Click to collapse
Stock and as you can see the PDA and CSC all state that my ROM is F. Even the XDA app says I have the F model. It is weird but this is how it is.
Just make sure you are flashing something that has your area language and baseband.
I have a feeling that the ROMs of the F & FD phone editions are the same, you will not find separate lists for both versions in any ROM hosting sites (Sammobile, Samfirmware....etc) . In addition to the SAMFIRM ROM downloader tool I used to download the full ROMs which only recognized the F version for my FD device. For a device from a market (CSC) that has the FD ONLY released to it.
On the FD version...How do you cut off Blue Box with #1 Sim notification for Messages?
Sent from my SM-N920T using XDA-Developers mobile app
DionWhite33 said:
On the FD version...How do you cut off Blue Box with #1 Sim notification for Messages?
Click to expand...
Click to collapse
This might be really hard to achieve without root and Xposed. Even so, no guarantee you would find the option in one of Xposed modules.
DionWhite33 said:
On the FD version...How do you cut off Blue Box with #1 Sim notification for Messages?
Sent from my SM-N920T using XDA-Developers mobile app
Click to expand...
Click to collapse
what is "Blue Box"? what do you mean?
I found this which is specific for the N930"FD" (dual-SIM version):
http://www.sammobile.com/firmwares/database/SM-N930FD/
Related
Hi everyone,
I'm looking for a stock rom for the galaxy j2 prime dual sim (DS version). SM-G532G/DS
I flashed mine with the single sim version in order to root it, everything is working fine but it misses some functionalities.
So far i looked everywhere on google, no way to find it, this model is only sold in a few countries.
Any help will be greatly appreciated
Thanks.
I am also looking for this stock rom. Did you happen to find one? Thanks!
k1llb0+ said:
I am also looking for this stock rom. Did you happen to find one? Thanks!
Click to expand...
Click to collapse
No way, looked everywhere noeone has that room
Pepper9187 said:
No way, looked everywhere noeone has that room
Click to expand...
Click to collapse
What are the missing features after you rooted?
k1llb0+ said:
What are the missing features after you rooted?
Click to expand...
Click to collapse
I know for sure "VoltE" is missing + i think i have some others features missing from the quick launch (honestly cant tell what)
Up
Is there a G532G single sim and a G532G double sim? Or is the G532"G" only double sim?
ShaDisNX255 said:
Is there a G532G single sim and a G532G double sim? Or is the G532"G" only double sim?
Click to expand...
Click to collapse
G532G is the single SIM version, G532G/DS is the dual SIM. I think DS = dual SIM.
Edit:
I am also looking for stock firmware for G532G/DS. I found a link in facebook but I cannot post links yet due to post count restriction. Details are below. You can test it for yourself.
SM-G532G/DS
COMBINATION FILES
COMBINATION_OXE_FA60_G532GDXU1APK1_FACTORY_user_mid_noship_MULTI_CERT.rar NEW EXCLUSIVE
Download | Size: 434 MB
LAST V 11/2016
vin1932 said:
G532G is the single SIM version, G532G/DS is the dual SIM. I think DS = dual SIM.
Edit:
I am also looking for stock firmware for G532G/DS. I found a link in facebook but I cannot post links yet due to post count restriction. Details are below. You can test it for yourself.
SM-G532G/DS
COMBINATION FILES
COMBINATION_OXE_FA60_G532GDXU1APK1_FACTORY_user_mid_noship_MULTI_CERT.rar NEW EXCLUSIVE
Download | Size: 434 MB
LAST V 11/2016
Click to expand...
Click to collapse
That's the combination firmware not stock.
I would think that the G532G stock firmware is also for the DS version.
@ashyx can you please tell me what is a combination firmware and what is it for?
Another question, my build number is G532GDXU1AQC1 and locked in Globe (Philippines). If I update my firmware using a fw for another carrier (Smart - Philippines), will I be able to use a Smart SIM? I found this 1.4GB firmware online and I was wondering if I can use it. My goal is to be able to use a Smart SIM, it's fine if I cant use Globe. Thanks in advance.
vin1932 said:
@ashyx can you please tell me what is a combination firmware and what is it for?
Another question, my build number is G532GDXU1AQC1 and locked in Globe (Philippines). If I update my firmware using a fw for another carrier (Smart - Philippines), will I be able to use a Smart SIM? I found this 1.4GB firmware online and I was wondering if I can use it. My goal is to be able to use a Smart SIM, it's fine if I cant use Globe. Thanks in advance.
Click to expand...
Click to collapse
Combination firmware is used by engineers for diagnostic purposes. It's no good for day to day use.
I can't really answer your other question as I don't know.
All I can say is backup your device with twrp then try it.
how did you root your j2 ds?
i had a firmware for g532g/ds ..you'll just update the firmware through software update after you flash.im willing to share this firware but i dont how to upload it here in this forum...
---------- Post added at 04:00 AM ---------- Previous post was at 03:57 AM ----------
posteso9 said:
how did you root your j2 ds?
Click to expand...
Click to collapse
ive gain my root acces to my phone g532g by flashing TWRP made by ashyx..
allasmedia said:
i had a firmware for g532g/ds ..you'll just update the firmware through software update after you flash.im willing to share this firware but i dont how to upload it here in this forum...
---------- Post added at 04:00 AM ---------- Previous post was at 03:57 AM ----------
Click to expand...
Click to collapse
can you share the link on where you downloaded it pls?
here it is..
ralunger said:
can you share the link on where you downloaded it pls?
Click to expand...
Click to collapse
search to google" G532G latest firmware stockromupdate "
then click the second and you will be directed to stockrom.com
then select the first firmware with..
AP/PDA G532GOLB1APK3
CP/CSC G532GOLB1APK3
Thank you
allasmedia said:
search to google" G532G latest firmware stockromupdate "
then click the second and you will be directed to stockrom.com
then select the first firmware with..
AP/PDA G532GOLB1APK3
CP/CSC G532GOLB1APK3
Click to expand...
Click to collapse
Hi, found your reply here. I think you are referring to stockromupdate dot com.
stockromupdate dot com/2017/01/13/stock-rom-sm-g532g-samsung-galaxy-j2-prime/
Pepper9187 said:
Hi everyone,
I'm looking for a stock rom for the galaxy j2 prime dual sim (DS version). SM-G532G/DS
I flashed mine with the single sim version in order to root it, everything is working fine but it misses some functionalities.
So far i looked everywhere on google, no way to find it, this model is only sold in a few countries.
Any help will be greatly appreciated
Thanks.
Click to expand...
Click to collapse
Search on updato.com firmware for SM-G532G. DS - mean Dual Sim. All of this firmwares work with dual sim. In the device information will be written only G532G. DS is written only on phone's sticker and box.:laugh:
dayanch96 said:
Search on updato.com firmware for SM-G532G. DS - mean Dual Sim. All of this firmwares work with dual sim. In the device information will be written only G532G. DS is written only on phone's sticker and box.:laugh:
Click to expand...
Click to collapse
Hi,
Thanks yeah i know that all the firmware work with the dual sim, however the voltE function is missing with all the standards firmware somehow.
Stock Rom of Samsung Galaxy J2 Prime Vietnam ROM
please email me at [email protected] to get the link to latest stock rom.
stock rom
https://
drive
.
google
.
com
/file
/d
/0B5k55wKuQPI5aGxwZUNuTkljQnM
/view
I'm happy to announce that the long waited Android 9 Pie has finally arrived for our devices.
PDA: A530FXXU4CSC3
CSC: A530FOXM4CSC3
Bare in mind, it's released for the Russian (CSC) SER.
Please follow the instruction bellow provided if you are willing to flash to your device.
Code:
https://www.sammobile.com/firmwares/galaxy-a8/SM-A530F/SER/download/A530FXXU4CSC3/260895/
Download:
Mega
Installation Instructions:
Download Odin v3.13.1
Extract the firmware file you just downloaded. You should get 5 files:
AP (System &Recovery)
BL (Bootloader)
CP (Modem / Radio)
CSC_*** (Country / Region / Operator)
HOME_CSC_*** (Country / Region / Operator)
Add each file to it's respective field in Odin v3.13.1. Use CSC_*** if you want to do a clean flash or HOME_CSC_*** if you want to keep your apps and data.
Reboot your phone in Download / Odin mode (make sure your device is off) with the following button combo: POWER + VOLUME DOWN + VOLUME UP
Once in download mode, connect your phone to the PC, preferably using the original USB cable you got with your phone. Odin should detect your device and a BLUE box will show up with the COM port number. (Be sure, the SAMSUNG-drivers are installed on your PC!)
Do NOT tick any extra boxes. The only options to be ticked are F.Reset Time and Auto-Reboot.
Click the start button, wait for Odin to say 'PASS' in a GREEN box. Once the flash is complete, your phone will reboot, and you can disconnect your phone from the PC.
Reserved for future updates
I have a different csc so if i install this firmware on my phone could it make any problem ?
Nadeem.alawashreh said:
I have a different csc so if i install this firmware on my phone could it make any problem ?
Click to expand...
Click to collapse
I just did flash it to my device which was different CSC, everything works as it should.
And the sim card work fine ?
Sorry for my english
Nadeem.alawashreh said:
And the sim card work fine ?
Sorry for my english
Click to expand...
Click to collapse
Yes, my both sim cards work fine.
I installed this Russian Android 9 Pie. I have OEM Unlock. Can I install TWRP 3.2.3-0 of BlackMesa 123?
ZmisiS said:
I installed this Russian Android 9 Pie. I have OEM Unlock. Can I install TWRP 3.2.3-0 of BlackMesa 123?
Click to expand...
Click to collapse
At this time twrp will work but the rmm is not been tested on pie you could get locked out.
My csc is BRI A530F. Does this void the warranty?
Dantar0 said:
My csc is BRI A530F. Does this void the warranty?
Click to expand...
Click to collapse
nope
---------- Post added at 09:14 PM ---------- Previous post was at 09:12 PM ----------
I uploaded on drive in case it be easier for you guys to download it.
https://drive.google.com/open?id=1uhkAQUDWyf_iMIeLb7R5Qr4Tm5X97zOv
Hi ! any feedback? how is pie? Thanks!
Rur0uniX said:
Yes, my both sim cards work fine.
Click to expand...
Click to collapse
I also have the dual sim Variant of the A8. Any major issues with it?
Dantar0 said:
I also have the dual sim Variant of the A8. Any major issues with it?
Click to expand...
Click to collapse
No, both sims works fine, so far so good, I can not tell you regarding the battery, since this is my first charge since the upgrade.
Hi,
Is it possible to get feedback? Does the phone still work as well as it used to (without lag,...) ? What about the battery,..... ?
Notghing of Call Recording on Pie without root.
Rur0uniX said:
No, both sims works fine, so far so good, I can not tell you regarding the battery, since this is my first charge since the upgrade.
Click to expand...
Click to collapse
Ah thanks. You gonna flash again when it's out in your country? Also did ya use the home csc
Dantar0 said:
Ah thanks. You gonna flash again when it's out in your country? Also did ya use the home csc
Click to expand...
Click to collapse
Yes I used the hime_csc since i didnt wanted to lose my data for now, maybe I will do clean flash when it will be released for my country.
My CSC is BRL (Brazil) can I install in the same way correct?
felipewirys said:
My CSC is BRL (Brazil) can I install in the same way correct?
Click to expand...
Click to collapse
As long as your model number is SM-A530F
My CSC is BRL (Brazil) can I install in the same way correct?
Click to expand...
Click to collapse
Yes. Installed it on ZTO and it seemed it was made for it. Had no russian welcome screen, it booted directly in brazilian portuguese.
-------
Portuguese: Instalado num A8 sem coisas de operadora, e esta PERFEITO. Vai sem medo.
My A50 Version is the Latin America, non-nfc version. It seems to be a little slower in receiving updates as the A505F model so I was wondering if I can just flash the later firmware on mine? Both models are non NFC.
AjBeld said:
My A50 Version is the Latin America, non-nfc version. It seems to be a little slower in receiving updates as the A505F model so I was wondering if I can just flash the later firmware on mine? Both models are non NFC.
Click to expand...
Click to collapse
You can flash through odin, not a problem at all.
I did the same with my A505f
Great, thanks!
I believe your phone is an exynos , eh?
bobandar said:
I believe your phone is an exynos , eh?
Click to expand...
Click to collapse
Yes, basically the same specs as the a505f version, except it seems like the a505g has more lte bands enabled?
everyone with g flash fn firmware to get nfc if you want
nikolas60 said:
everyone with g flash fn firmware to get nfc if you want
Click to expand...
Click to collapse
is this true? if yes i wanna try it
im not able to flash fn version on a g device.
hey, so I tried to flash the A505G firmware today using ODIN but it keeps hanging while trying to flash it.
Where are you getting stuck? I believe to flash alternative firmware than the device came with, you need an unlocked bootloader. Is your bootloader unlocked? i was able to flash a505gn on my a505g, but my bootloader was unlocked.
---------- Post added at 08:56 PM ---------- Previous post was at 08:55 PM ----------
I was able to flash back to official firmware and my ota is working again, so maybe next time i do a full wipe ill try a505fn on my a505g.
nikolas60 said:
everyone with g flash fn firmware to get nfc if you want
Click to expand...
Click to collapse
Really?
nikolas60 said:
everyone with g flash fn firmware to get nfc if you want
Click to expand...
Click to collapse
How true is that?
Yes, my bootloader is already unlocked but I think I have to change my CSC region first.
xkikinx said:
How true is that?
Click to expand...
Click to collapse
How can a software compensate for the absence of a hardware chip? NFC is a hardware supported feature.
Sent from my SM-A505F using Tapatalk
---------- Post added at 07:12 AM ---------- Previous post was at 07:10 AM ----------
AjBeld said:
Yes, my bootloader is already unlocked but I think I have to change my CSC region first.
Click to expand...
Click to collapse
Bootloader status has nothing to do with Odin flashing. You can literally flash any stock images through Odin on locked BL provided they are for the same model. Flashing a different model firmware is just asking for troubles.
Sent from my SM-A505F using Tapatalk
Well I have seen other flash different models to get faster updates. The A505G receives updates almost 1 month behind the A505F, even though the phones are almost identical hardware wise.
Hi All,
The latest combination file for GALAXY NOTE10+ 5G SM-N976B:
COMBINATION_FAC_FA90_N976BXXU1ASH3_FACFAC_CL16609933_QB25273195_REV01_user_mid_noship.tar.md5
Please Press Thanks if you like my post.
Useful ! Nice job.
what does it mean by 'combination' ?
indup said:
what does it mean by 'combination' ?
Click to expand...
Click to collapse
Combination firmware is customize service firmware for the Samsung devices to check the hardware, waterproof and other security. It helps in enabling ADB and OEM unlocking.
Combination Firmware Benefits
-It enables to service menu to test the Samsung device. Read full information about Samsung mobile.
-Combination file can be use in downgrade the android version.
-Can fix the device does not have the key-DRK issue.
-Fix stuck or stopping in recovery mode.
-Combination firmware can fix stopping or stuck on Samsung logo.
-Fix IMEI number with combination firmware.
holifo said:
Combination firmware is customize service firmware for the Samsung devices to check the hardware, waterproof and other security. It helps in enabling ADB and OEM unlocking.
Combination Firmware Benefits
-It enables to service menu to test the Samsung device. Read full information about Samsung mobile.
-Combination file can be use in downgrade the android version.
-Can fix the device does not have the key-DRK issue.
-Fix stuck or stopping in recovery mode.
-Combination firmware can fix stopping or stuck on Samsung logo.
-Fix IMEI number with combination firmware.
Click to expand...
Click to collapse
but can it be flashed is the question lol
elliwigy said:
but can it be flashed is the question lol
Click to expand...
Click to collapse
I haven't tried it yet. If anyone tried please confirm. Lol
@elliwigy @holifo
Any luck with a confirmation on flashing the combination file?
randallstevens said:
@[email protected]
Any luck with a confirmation on flashing the combination file?
Click to expand...
Click to collapse
yes.. i have a method on snap but im not releasing the method.. also needed are specific/special files which also are not publicly available amd i also cannot release for various reasons..
holifo said:
I haven't tried it yet. If anyone tried please confirm. Lol
Click to expand...
Click to collapse
i was being sarcastic lol.. samsumg now blocks flashing factory binary firmware in odin without approval/token
elliwigy said:
i was being sarcastic lol.. samsumg now blocks flashing factory binary firmware in odin without approval/token
Click to expand...
Click to collapse
You had me going until I scrolled further down lol,
Been itching to flash miss my s8 safestrap days
Can i flash this rom on Chinese N9760 snapdragon version,
What all the CSC available on this rom.
niza2000in said:
Can i flash this rom on Chinese N9760 snapdragon version,
What all the CSC available on this rom.
Click to expand...
Click to collapse
This isn't a rom and it's for N976B if you even tried to flash it on your phone it would.most likely brick it
minidude2012 said:
This isn't a rom and it's for N976B if you even tried to flash it on your phone it would.most likely brick it
Click to expand...
Click to collapse
I want to change CSC from China to my country, please guide if possible in any other way.
Else can i able to port CSC from Eynos to SD...
Hmm, Interesting with this combination firmware can be change BTU/BTU/VOB <- operator code?
Country / Region / Operator
Sent from my SM-N976B using Tapatalk
---------- Post added at 03:18 PM ---------- Previous post was at 03:15 PM ----------
elliwigy said:
yes.. i have a method on snap but im not releasing the method.. also needed are specific/special files which also are not publicly available amd i also cannot release for various reasons..
Click to expand...
Click to collapse
And this is worst and pointless thread if you can't flash and can't be released special files with this. This same like to tell, I give to anyone Lamborgini to try, but you can't drive, because I can't give tyres.
Sent from my SM-N976B using Tapatalk
Nettwerk said:
Hmm, Interesting with this combination firmware can be change BTU/BTU/VOB <- operator code?
Country / Region / Operator
Sent from my SM-N976B using Tapatalk
---------- Post added at 03:18 PM ---------- Previous post was at 03:15 PM ----------
And this is worst and pointless thread if you can't flash and can't be released special files with this. This same like to tell, I give to anyone Lamborgini to try, but you can't drive, because I can't give tyres.
Click to expand...
Click to collapse
well the files are not public and cost a large sum.. this and possibly being sued by samsung as well as burning my source who ased me not to release its just not worth it.
i release plenty of other work for free so im not worried one bit.
niza2000in said:
I want to change CSC from China to my country, please guide if possible in any other way.
Else can i able to port CSC from Eynos to SD...
Click to expand...
Click to collapse
Chimeratool can change it for you easy
https://chimeratool.com/
GeeAyeZee said:
Chimeratool can change it for you easy
https://chimeratool.com/
Click to expand...
Click to collapse
Good day to all,
I would like to buy the Note + 10 N9760 dual sim , but...... ,
those Samsung App. that are not working as the Samsung Pay and o on in this Chinese model stopping me to buy it.
But what if the rom of "Samsung's Galaxy Note10+ 5G (Verizon) SM-N976V " will be installed in the Note + 10 N9760 dual sim?
if am not wrong both of the use the same Snapdragon 855 , am I right ?
do you know if someone already changed the rom ?
thanks to all and be safe
thepinkpanter said:
I would like to buy the Note + 10 N9760 dual sim
Click to expand...
Click to collapse
Look on Facebook Marketplace, there's Australian model Note 10+ 5G's - both 256GB and 512GB variants - going for as low as AUD$900.
My first question is, surely there's a way to downgrade the latest Android Q security update back to when the bootloader could be unlocked? I've rooted every model Galaxy S from the first one right up to the S8, and am quite upset that this next device in my purchase history won't let me do with it the exact same things I've done to the eight other phones I've owned.
Last question...
When are the muppets who make these devices going to realise that paying almost $AUD2000 for a mobile phone should allow me to use it as I see fit?
how to enable native call recording that Samsung has in its software?
Flash ina xxv csc
but anyone already tried fold4? and what did he do it?
any update?
Mr Hassan said:
Flash ina xxv csc
Click to expand...
Click to collapse
Can you do this on an American model SM-F936U?
chakid21 said:
Can you do this on an American model SM-F936U?
Click to expand...
Click to collapse
As we know Usa models have only 4 different options have to change csc
But all these 4 not have call recording option until you have root access
For root need BL unlock and BL unlock @Afneh can
Mr Hassan said:
For root need BL unlock and BL unlock @Afneh can
Click to expand...
Click to collapse
Are you sure he can? His telegram BL unlock group has a list of unlockable options and the fold 4 isn't on that list. At least not yet, unless you know more.
chakid21 said:
Are you sure he can? His telegram BL unlock group has a list of unlockable options and the fold 4 isn't on that list. At least not yet, unless you know more.
Click to expand...
Click to collapse
if not then clearly not support but you can still ask him @afaneh92
chakid21 said:
Are you sure he can? His telegram BL unlock group has a list of unlockable options and the fold 4 isn't on that list. At least not yet, unless you know more.
Click to expand...
Click to collapse
Not supported for unlock
ok, but some one is try to change CSC for example ILO?
Mr Hassan said:
Flash ina xxv csc
Click to expand...
Click to collapse
How can I Flash ina xxv csc ?
hammody said:
How can I Flash ina xxv csc ?
Click to expand...
Click to collapse
In usa device's not possible
Good news, Cube ACR works perfect in my Fold 4 so for those whose firm doesn't allow callrecording due to legal restricctions tiene is an alternative to CSC change.
Mr Hassan said:
In usa device's not possible
Click to expand...
Click to collapse
My device is from the UK. SM-F936B/DS
hammody said:
My device is from the UK. SM-F936B/DS
Click to expand...
Click to collapse
Change csc
Mr Hassan said:
Change csc
Click to expand...
Click to collapse
Thanks.. how can I change it? And to which version?
hammody said:
Thanks.. how can I change it? And to which version?
Click to expand...
Click to collapse
ILO
Could we please refrain from giving incomplete and barely legible advice that doesn't really help people, please?
@hammody to flash that CSC, you'll need:
- ODIN (latest version is 3.14.4 I believe, you'll have to hunt XDA for the latest version, and it's not yet guaranteed to work with the Fold4 - an update might possibly be needed)
- The appropriate firmware containing the CSC you're looking for (samfirmware or similar sources, https://github.com/samloader/samloader if you're technically adept)
- Possibly a SIM card from that CSC region (this is because your phone will choose the best matching CSC, based on, in order: 1, SIM card 2, Phone release region 3, best/default available CSC if neither SIM nor phone region CSC found)
1. Insert SIM card into phone
2. Flash firmware with ODIN (this WILL wipe your phone)
3. Reboot and wait
The correct CSC should be picked up and loaded, and call recording function should be available. However you _might_ lose features that are in the local CSC.
On my s22 ultra I changed my CSC via SamKey.. can I do the same here?
hammody said:
On my s22 ultra I changed my CSC via SamKey.. can I do the same here?
Click to expand...
Click to collapse
not yet - today version of samkey dont support fold4