Develop Bugs

Sense modification (from Sense Toolbox) doesn't work on ARHD > 8.0

Hi
I've got a problem with a Sense modification, specifically with the gestures on the main screen. They don't work since ARHD 8.1 (earlier everything worked just fine on my M7, and on M8)... I've tried wiping, did all the stuff from s-off to changing firmware etc. Everything except this options work fine... And these are my favourite options. To be clear, there's a screen in attachment of what doesn't work. Tried to turn it off and on few times etc. etc. I've even waited for the new ARHD 9.1, did everything to flash it properly, and it does work like a charm except the Sense mods :/

ancymon85 said:
Hi
I've got a problem with a Sense modification, specifically with the gestures on the main screen. They don't work since ARHD 8.1 (earlier everything worked just fine on my M7, and on M8)... I've tried wiping, did all the stuff from s-off to changing firmware etc. Everything except this options work fine... And these are my favourite options. To be clear, there's a screen in attachment of what doesn't work. Tried to turn it off and on few times etc. etc. I've even waited for the new ARHD 9.1, did everything to flash it properly, and it does work like a charm except the Sense mods :/
Click to expand...
Click to collapse
Flashing firmwares has made your kernel unwritable. Dirty flash the rom or flash a kernel to fix it. If that doesn't fix it, you need to do a full clean install, this means when you go to twrp, go to wipe, advanced, click cache, dalvik, data, system and wipe. NOT internal or ext or usb.

an0ther said:
Flashing firmwares has made your kernel unwritable. Dirty flash the rom or flash a kernel to fix it. If that doesn't fix it, you need to do a full clean install, this means when you go to twrp, go to wipe, advanced, click cache, dalvik, data, system and wipe. NOT internal or ext or usb.
Click to expand...
Click to collapse
I've did full wipes few times after flashing rom etc. (i always do full wipes, without sd card) and i didn't help, I'll try flashing kernel once more (maybe got back to stock kernel, not the ElementalX).
update: Flashing Kernel helped, thank You Sir
update nr 2: I've tried if it work with the new google account, and it worked, but when I full wiped, and tried my old google account with my settings it does not work :/

ok, finally I've got it worked - You can't bring back your google settings, if You log on to Your old account, without option of "backing up Your settings, apps etc." it works like a charm... More work to do to bring back all the settings, but it does work.
Everyone having the same problem, I think it's the only solution, tried everything else :/

Wiped Internal Storage; now phone reboots on loading ROMs

Hey guys,
So last night I accidentally wiped internal storage in TWRP. I guess that messed up my partitions or something, I don't know. Anyway, I can still access recovery, and I've tried to do a restore (one that I made back when I was on stock 4.4.2 I think) but after that it tries to boot, gets to "Android is upgrading... Optimizing app Y of X." and once that operation completes it shows the lockscreen for about a tenth of a second, and the phone reboots.
I'm stumped. Anyone know what can I do?
Sorry if this has been asked a hundred times. For some reason the search function in the forums isn't working for me. And I've been looking for a solution all morning.
EDIT: FYI when I tried the restore I did only System and Data and not Boot, because I was afraid that'd cause more problems.

Did you try restoring and performing a factory wipe before booting the newly-restored ROM?

It seems that Marshmallow based roms aren't working, but Lollipop ones will boot. Not sure why as I didn't have any problem with the same MM roms in the past.
More info:
MM roms wont flash in TWRP; after the failed attempt, TWRP says system cannot be mounted until I either wipe or install a 12.1 rom.
Tried to install a stock rom (4.4.2) and it failed in TWRP. Just says "Error Flashing"

Are you performing a full wipe (system, Dalvik, cache, data) before installing or restoring a ROM? Is the phone running the latest version of TWRP?

audit13 said:
Are you performing a full wipe (system, Dalvik, cache, data) before installing or restoring a ROM? Is the phone running the latest version of TWRP?
Click to expand...
Click to collapse
Yes to full wipe. TWRP is 2.8.7.0, so yeah I think it's the newest? Not 100% sure.

Wiping internal storage should not affect the partitions. I'm not sure that TWRP even has the ability to change partitions.
Yes, 2.8.7.0 is the latester version of TWRP.
If you are on the nj2 bootloader, try flashing this in TWRP: http://forum.xda-developers.com/galaxy-s3-att/general/rooted-ucufnj1-stock-rom-t2985006

Welp, seems to be all good now. Not sure if I really did anything to fix it or not. I tried to install a stock ROM but it wouldn't boot (stuck on Samsung logo) but after that my CM13 ROM installed properly again. The one CM13 ROM I have still wont install at all - maybe that file became corrupt or something? Not sure if that's even possible.
Either way I'm all fixed up. Thanks for all your help.
Cheers

Glad you got it sorted out. If you do figure out what you did to get it working, post your answer as it may help others that are in a similar situation.

CM13 not booting

After flashing TWRP with Odin, I boot into recovery and wipe the dalvik cache. I then go to install the CM13 zip file, and it works. I wipe Dalvik again and reboot in the os. This is where it just shows the CM boot screen infinitely. Nothing else. What is up. I am using the latest TWRP and CM13 release.

Try this:
1. Wipe cache, dalvic cache, data, system
2. Install CM13 again, along with your gapps(google apps if you didn't know, custom ROMs never come with them, optional)
3. Boot it, it should work
You cannot switch ROMs without wiping data. Bad things happen.
You must clean flash when:
1. Switching between a stock ROM to a custom ROM
2. Downgrading Android versions (5.1 to 5.0)
3. Switching custom ROMs (I.E. CM13 to AICP)
4. When the ROM's thread warns to (switching keys)
5. Switching between nightly builds and stable.
When you're updating nightlies, you shouldn't have to though.

RDChase said:
Try this:
1. Wipe cache, dalvic cache, data, system
2. Install CM13 again, along with your gapps(google apps if you didn't know, custom ROMs never come with them, optional)
3. Boot it, it should work
You cannot switch ROMs without wiping data. Bad things happen.
You must clean flash when:
1. Switching between a stock ROM to a custom ROM
2. Downgrading Android versions (5.1 to 5.0)
3. Switching custom ROMs (I.E. CM13 to AICP)
4. When the ROM's thread warns to (switching keys)
5. Switching between nightly builds and stable.
When you're updating nightlies, you shouldn't have to though.
Click to expand...
Click to collapse
Just did it, it still seems to be booting like it previously was. Wiped cache, dalvic, data, and system and then installed CM13 and gapps. Still booting as I write this.

Since that failed, check your download, make sure nothings bad. If its bad, redownload, if not, idk.
If you post your recovery logs, or what the console says, that will help me figure out what's going on.
Also, is your phone the triband model (l710t)?
Are you flashing anything else at the same time?
The more info you give, the better.

RDChase said:
Since that failed, check your download, make sure nothings bad. If its bad, redownload, if not, idk.
If you post your recovery logs, or what the console says, that will help me figure out what's going on.
Also, is your phone the triband model (l710t)?
Are you flashing anything else at the same time?
The more info you give, the better.
Click to expand...
Click to collapse
I've kind of given up at this point. Even CM12 doesn't work. The only thing that seems to work is the stock rom. My phone is the regular SPH-L710 model. I didn't even know the L710t was a thing.

I have the same problem, and sometimes it boot in the system setup mode, but the sensor is not working, i can turn on airplane mode, reboot or power off, and sensor works, what happend i dont know((

ovil101 said:
After flashing TWRP with Odin, I boot into recovery and wipe the dalvik cache. I then go to install the CM13 zip file, and it works. I wipe Dalvik again and reboot in the os. This is where it just shows the CM boot screen infinitely. Nothing else. What is up. I am using the latest TWRP and CM13 release.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2755793
helped)))

1vankill1 said:
http://forum.xda-developers.com/showthread.php?t=2755793
helped)))
Click to expand...
Click to collapse
That just seems to be a stock rom.

yes it stock rom, after it was installed, I was able to install 13 cm

No Wifi & Sim, Random reboots (Really need help)

My Issue:
No Simcard is found and the Wifi setting wont even show up any Wifi, only the loading bar. When i wait a few minutes my OP3 reboots and the rest works untill in reboots again after a few minutes.
My Story:
Yesterday i updated to 3.2.6 with magisk, phh systemless root and systemless xposed and everything went fine.
Today i did a backup (all partitions) and did a full wipe (except storage) and then flashed Resurrection Remix. I cant tell if the issue was already occuring at this time but i did a full wipe (except the internal storage partition, everything) again and recovered my backup. Definitely since then i am nolonger able to use my phone. I tried wiping everything (now even with storage) and flashing pure stock OOS (3.2.6) but nothing changed.
I am very desperate and dont know whats going on and how to fix it. Thanks to everyone who can help.

when you say you did a backup, exactly which partitions did you backup?
when you say full wipe, exactly which partitions did you wipe?
when you say then flashed OOS, exactly which version did you flash? And have you ever flashed the OOS CB 3.5.2?

Thanks for your fast answere i hope you can save my ass.
I went to Advanced wipe and selected everything except internal storage at the first time and the second time when i tried to clean flash oxygen os i wiped everything you can find there to be sure.
My Backup and the Clean Oxygen OS zip are both 3.2.6
In my Backup every partition is backed up except Cache.
No i never installed any CB.
Additional info: it was the unofficial [OxygenCam] Ressurection Remix and i did not flash Gapps over RR.

regardless of what you did, a clean flash should work if you're wiping /system + /data and then flashing a TWRP flashable version of OOS (since it includes gapps)
regarding RR, it probably requires gapps, but i could be wrong as i haven't used it (i know gapps were needed for sultan's CM which I used, for example)

2x4 said:
regardless of what you did, a clean flash should work if you're wiping /system + /data and then flashing a TWRP flashable version of OOS (since it includes gapps)
regarding RR, it probably requires gapps, but i could be wrong as i haven't used it (i know gapps were needed for sultan's CM which I used, for example)
Click to expand...
Click to collapse
Yes but my problem is that i wiped data and system a second time and tried flashing the clean 3.2.6 and after that in the first boot setup guide kinda thing it begins with my issue of no sim wifand random reboot, i my try with 3.2.4 now (sounds more stable)
Is there a downloadlink for full rom 3.2.4 at the op homepage?

I clean flashed oos 3.2.4 like you said but still the same error...
It seems like my efs is broken, i have no imei number anymore

Issues flashing ROM

I'm having some issues flashing any ROM. TWRP will not wipe data, or internal SD
For some reason, when I go to wipe data and factory reset, TWRP will say it was successful, but nothing ever gets wiped. It will only wipe system if I choose to. I've gotten a ROM to flash but when it boots up, all of the old apps and user data are still there and it makes everything crash. I've gotten into settings to do a reset, it reboots into recovery, runs the script, and still nothing wipes.
What I have tried:
Old TWRP, newest TWRP
CWM (seems to wipe but it won't get past the note 2 screen after flashing anything)
Wiping with CWM, flashing TWRP, then flashing a ROM (still loops after the note 2 screen)
Is there a terminal command I can use in TWRP to manually wipe things?
Thanks for any help I can get, I've flashed so many phones I can't remember but I've never had this issue

Maybe flash back to a stock ROM, factory wipe using stock recovery, then flash TWRP?

audit13 said:
Maybe flash back to a stock ROM, factory wipe using stock recovery, then flash TWRP?
Click to expand...
Click to collapse
Well when it bootloops t the Note 2 screen, I have to flash a ROM with Odin to get it working again. I've flashed a stock ROM with Odin, flashed TWRP with Odin, tried the wipes and it never wipes anything... I'm lost...
Isn't there a format function in TWRP that is seperate from the factory reset or advanced wipes? I was also trying to find a terminal command to type in the terminal in TWRP... I'm a little stumped...

I'm sorry, I read that too fast... That may actually work, wipe it in the stock recovery, and just don't let it boot into the system before flashing other stuff... I'm gonna try that out... Thanks man, I'll post back about it...

Since you are flashing the phone with Odin, is it a stock 4.1.1 ROM you're flashing? Which custom ROM are you flashing to the phone?

audit13 said:
Since you are flashing the phone with Odin, is it a stock 4.1.1 ROM you're flashing? Which custom ROM are you flashing to the phone?
Click to expand...
Click to collapse
The stock ROM I used is I317-ODIN-UCUCNJ1-Stock without the booloader packaged in, I'm still on the old bootloader. It's 4.4.2
The ROMS I've tried to flash was
Cyanide (Error 7, says incompatible data, please wipe the phone)
Resurrection Remix (Error 7, says incompatible data, please wipe the phone)
Latest CM10 Nightly
I got CM10 and Resurrection Remix to flash a couple times, but the phone boots and all the old apps and data, including the AT&T ones are still there, and the system keeps crashing. Then I change the recovery to CWM because it seems to wipe, change back to TWRP, flash the ROM and gapps again, but it bootloops at the Note 2 screen.
Should I try the 4.1.1 ROM and CWM? Whenever I'm going from a stock TW to non-TW I like to format everything, data, cache, system, and internal SD, but of course TWRP won't wipe the data or the internal SD.

It's probably because the bootloader and modem are too old for the roms. Recent roms will need updated bootloaders.

Ok, I had some more time to mess around with this today and figured it out. I feel kind of dumb but oh well, I got it.
TWRP was already loaded on, so I went to messing with it again. The 'Swipe to factory reset' was not wiping the data, and there was the 'Format Data' button right there in front of me. I did the factory reset, format data, rebooted recovery, wiped dalvik, cache, and system, then flashed the ROM and everything booted up just fine.
Thanks for all of the help!