hello i have a root and xposed and i installed <3 > <4> apps to change me the mac address but all of them didn't work
and the google also didn't help me < so i come to here >
i hope i will find the solution here
Tanktop_Paedo said:
I would assume you can't. A mac address is fixed and cannot be changed, it comes from the NIC when it is manufactured of a computer and whatever the equivalent is for a phone. I guess root apps might be able to emulate a mac address?
Click to expand...
Click to collapse
it was working good in previous versions in android like 4.4.4
and 5
u just to root the device and install any mac address changer and u dont ,
but now in 6.0.1 i tried everything from apps to Manual but it always still the same mac .
Tanktop_Paedo said:
I would assume you can't. A mac address is fixed and cannot be changed, it comes from the NIC when it is manufactured of a computer and whatever the equivalent is for a phone. I guess root apps might be able to emulate a mac address?
Click to expand...
Click to collapse
Sure you can spoof Mac. Hard coded doesn't matter.
There are several ways to spoof. Here is one way: http://www.gohacking.com/spoof-mac-address-on-android-phones/
You can also edit a file with root access but I can't remember the file name. I will see if I can't find it.
Sent from my ONEPLUS A3000 using XDA-Developers mobile app
Edit:. This thread refers back to XDA from another forum but talks about editing the file. Just scroll down to answer. (I haven't tried it yet, so OP3 may have a different file...you will need to try it out)
http://android.stackexchange.com/qu...the-permanent-mac-address-on-my-android-phone
molhamstar said:
hello i have a root and xposed and i installed <3 > <4> apps to change me the mac address but all of them didn't work
and the google also didn't help me < so i come to here >
i hope i will find the solution here
Click to expand...
Click to collapse
Hey man i was searched for the Macc changing in the one plus 3 mobile. i just bought my yesterday and yesterday i rooted My phone . And mainly i searched for spoofing but nothing is working and finally i have found the Filename where the Macc address present in this Path /persist/wlan_mac.bin open this file and edit the First One and save it and switch on the flight mode and switch off then check It might be changed . If not changing Tell me and i'm writing one script for that i will post the Script Enjoy....
molhamstar said:
hello i have a root and xposed and i installed <3 > <4> apps to change me the mac address but all of them didn't work
and the google also didn't help me < so i come to here >
i hope i will find the solution here
Click to expand...
Click to collapse
Hey man i just find out the way to change macc in one plus 3 mobile . i just bought my one plus 2days back . i rooted my phone on that day and i thought that the change my macc will help full here that is not working here i just figured it the filename where the macc address was stored.
/persist/wlan_mac.bin this is file where macc address stored change the First Line that is for wlan0 so change it put mobile in Flight mode and turn off the flight mode. I'm going post a video on this soon....
Hope this is helpful
https://youtu.be/uFXZPWZdI-E
Check this video, it's basically changing the wlan_mac.bin file. But you have to use an app called nethunter to reset the Mac in order to change it.
This successfully worked on my 3T!
Related
this is for all root users .
if u dont know anything about root,search it on google.....
now the basic concept is that any app comes to know about "which device u have" from the build.prop file present in system directory of your phone.the trick is to edit your build.prop file so that the app thinks that you have a galaxy note...
STEPS:
1.you need a file manager that supports root functions.you can download (rootexplorer.apk) from attachments .
2.after installing root explorer ,open it .it will request root access . click on allow. then go to system directory .first click on the button showing mount system read/write above and then click on build.prop .root explorer will prompt you with a list of programs to open the the build.prop file.
3.choose text editor .then you will be able to edit the build.prop .just find out wherever your devices model number is written change the number to GT-N7000 .
4.Specially change "ro.product.manufacturer" to Samsung and change "ro.product.model" to GT-N7000.
please hit thanx if you think it was helpful
you can ask for egsteroid levels
dont forget to put hiphens in model number........
Didn't help
Unfortunatelly Danger Zone levels didn't show up in the app main screen. I changed model in two places and manufacturer in one. Didn't find any other instances of these two variables. Any ideas?
damek25 said:
Unfortunatelly Danger Zone levels didn't show up in the app main screen. I changed model in two places and manufacturer in one. Didn't find any other instances of these two variables. Any ideas?
Click to expand...
Click to collapse
what do you mean by "dangerzone levels didnt show up.werent they unlocked.can you please explain
write GT-N7000 instead of GT N7000 and reboot.to check. go to settings /about phone. ...
you can attach the build.prop file i will edit and give it back to you then you can use
Sent from my GT-N7000
works great on my Desire, thanks
Fivo86 said:
works great on my Desire, thanks
Click to expand...
Click to collapse
your welcome....well you see i got a galaxy 551. but with this trick the xda app thinks i have a galaxy note.
(sent from my GT-N7000)
once you unlock those levels, can put back original brand name and model??
Felsar said:
once you unlock those levels, can put back original brand name and model??
Click to expand...
Click to collapse
you can put back original brand name an model but i am not sure will those levels stay unlocked or not.i think if you will play some of them and then revert back ,they will stay unlocked.
actually, i never wanted to revert back because with this trick google plays lets me download apps that are incompatible.....
I found two entries for the model
it was the second one - near the manufacturer one...
---------- Post added at 02:04 PM ---------- Previous post was at 02:02 PM ----------
shredmatix said:
you can put back original brand name an model but i am not sure will those levels stay unlocked or not.i think if you will play some of them and then revert back ,they will stay unlocked.
actually, i never wanted to revert back because with this trick google plays lets me download apps that are incompatible.....
Click to expand...
Click to collapse
by the way - if you revert and reboot you will lose the levels again (but the progress is saved)
Works on my HTC One S. I played a few levels, then restored my build.prop file, rebooted a few times and still works.
Hi everyone. I need to change my Mac Address on a stock rooted ICS SGS3 Sprint.
None of the apps work in changing the mac address on this device I tried them all.
To my understanding there is a .conf file somewhere in the /system/ dir.
Any help on witch directory this is located and the file name to edit?
Thanks!
Strange that I read this from you. I read your post in the "things to do with your GS3". Didnt you have a mac address spoofer in there? BTW I liked everything you made us aware of especially wifikill thanks.
evoer said:
Strange that I read this from you. I read your post in the "things to do with your GS3". Didnt you have a mac address spoofer in there? BTW I liked everything you made us aware of especially wifikill thanks.
Click to expand...
Click to collapse
Yea I had not used that app on this device yet. It used to work on my Evo. I think I may have figured this out.
This method has worked fine for me:
http://forum.xda-developers.com/showthread.php?t=1385577
Make sure you are not connected to anything before hand
Tekara said:
This method has worked fine for me:
http://forum.xda-developers.com/showthread.php?t=1385577
Make sure you are not connected to anything before hand
Click to expand...
Click to collapse
The command works fine and I did it while not connected to my network. However when I go to connect I get authentication failure. The mac also does not change. I wonder why. I will keep digging.
busybox ifconfig wlan0 hw ether 00:11:22:33:44:55
Thanks!
I thought I was doing great after uninstalling bloatware. However, when I tried to connect my Note 2 to my PC via USB I received the error that MTP USB Device driver could not be loaded. Apparently I must have uninstalled something on my Note 2 that is not allowing me to connect to the PC via USB. I have been searching for days, read many postings with the same problem, downloading various Driver apps to no avail. I even downloaded and installed Samsung Drivers which also did not work. I still can use my USB plug from NOTE 2 to my Flash Drive to get stuff transfered to/from Note2/PC.
It never ends. Fix one thing and then another pops up. LOL
What else can I say except - H-E-L-P.
What de-bloater tool did you use ?
Does it show the apps it uninstalled ?
By default any de-bloater should only delete apps from /system/app and
/data/app.
Have you considered starting over by flashing root injected stock Rom?
Sent from my SGH-T889 using xda app-developers app
ciphercodes said:
What de-bloater tool did you use ?
Does it show the apps it uninstalled ?
By default any de-bloater should only delete apps from /system/app and
/data/app.
Have you considered starting over by flashing root injected stock Rom?
Click to expand...
Click to collapse
I did not use any de-bloater. I used Titanium Backup Pro (TBP) and have a complete list of all apks uninstalled.
In TBP under Backup/Restore all apks uninstalled are listed. Plus, I kept a list of all that I deleted.
No, I have not considered starting over by flashing root injected stock ROM. Thought about it, however, if I
do flash, I'm back to square one.
If I don't resolve this one problem, I will remain at this point until new OS comes out. I do have a work around for time being.
I do appreciate your help, time and concern. Thank you.
What really amazes me is that this problem is all over the Internet and I can't find a simple solution. I have Googled it,
been on here doing searches, reading postings, etc. I have even tried Driver Booster.
asctony said:
I did not use any de-bloater. I used Titanium Backup Pro (TBP) and have a complete list of all apks uninstalled.
In TBP under Backup/Restore all apks uninstalled are listed. Plus, I kept a list of all that I deleted.
No, I have not considered starting over by flashing root injected stock ROM. Thought about it, however, if I
do flash, I'm back to square one.
If I don't resolve this one problem, I will remain at this point until new OS comes out. I do have a work around for time being.
I do appreciate your help, time and concern. Thank you.
What really amazes me is that this problem is all over the Internet and I can't find a simple solution. I have Googled it,
been on here doing searches, reading postings, etc. I have even tried Driver Booster.
Click to expand...
Click to collapse
Sometimes we miss something small and obvious. Have you disabled USB debugging mode in Developer options?
AE74 said:
Sometimes we miss something small and obvious. Have you disabled USB debugging mode in Developer options?
Click to expand...
Click to collapse
Yes, I just tried that based on your suggestion. However, still got the same: MTP USB Device error. Thanks for your help.
asctony said:
Yes, I just tried that based on your suggestion. However, still got the same: MTP USB Device error. Thanks for your help.
Click to expand...
Click to collapse
Can you check your phone setting by dialing *#7284#?
Method 3 on the link below.
http://www.danrichard.com/2013/06/1...nect-to-pc-via-usb-with-unknown-device-error/
AE74 said:
Can you check your phone setting by dialing *#7284#?
Method 3 on the link below.
http://www.danrichard.com/2013/06/1...nect-to-pc-via-usb-with-unknown-device-error/
Click to expand...
Click to collapse
Tried this and again no success.
Method 3 – Ensure you have the right settings By default my phone was already set to the right settings for USB file transfers so I’ll assume most of these ship with the same configuration, hence why I have this as method 3. I found this on a forum and while it did not work for me, it seems a few other folks declared it a success.
1. Launch the phone key pad on your note and press *#7284# (don’t forget to start with that * symbol!) When you press the last pound sign (#) this will bring up an option that will allow you to change your USB connection settings (modem or PDA) – change it to PDA.
I did not get any option that allowed me to change the USB Connection settings when I entered *#7284#. So I dialed that number and got an error Unable to process request.
Tried new USB cable and it still tried to load/install device drivers but not successful. Same error MTP USB Device Failed.
Thanks again for trying to help. I do appreciate your help and time. Still looking for a resolution.
asctony said:
Tried this and again no success.
Method 3 – Ensure you have the right settings By default my phone was already set to the right settings for USB file transfers so I’ll assume most of these ship with the same configuration, hence why I have this as method 3. I found this on a forum and while it did not work for me, it seems a few other folks declared it a success.
1. Launch the phone key pad on your note and press *#7284# (don’t forget to start with that * symbol!) When you press the last pound sign (#) this will bring up an option that will allow you to change your USB connection settings (modem or PDA) – change it to PDA.
I did not get any option that allowed me to change the USB Connection settings when I entered *#7284#. So I dialed that number and got an error Unable to process request.
Tried new USB cable and it still tried to load/install device drivers but not successful. Same error MTP USB Device Failed.
Thanks again for trying to help. I do appreciate your help and time. Still looking for a resolution.
Click to expand...
Click to collapse
Perhaps you may not have the system file Phone Utility 1.0.0 or corrupted.
AE74 said:
Perhaps you may not have the system file Phone Utility 1.0.0 or corrupted.
Click to expand...
Click to collapse
Yes, I do have Phone UTL as shown in TBP. How do I access it? I can't under the Method 3.
asctony said:
Yes, I do have Phone UTL as shown in TBP. How do I access it? I can't under the Method 3.
Click to expand...
Click to collapse
I am trying to find out if you have all the files and compare with my files to find out why I can access phone utility and you can't. Your issue may be the driver or files idk. Tbh, I am not an expert. Just another android enthusiast trying to help. I have Tweaked Rom so mine may be different. I have found 2 system files in TBU, Service Mode and MTP Application. Do you have them also? Does service mode work for you when you dial, for example, *#0011#?
SUCCESS-Thanks to Y-O-U!!!!
AE74 said:
I am trying to find out if you have all the files and compare with my files to find out why I can access phone utility and you can't. Your issue may be the driver or files idk. Tbh, I am not an expert. Just another android enthusiast trying to help. I have Tweaked Rom so mine may be different. I have found 2 system files in TBU, Service Mode and MTP Application. Do you have them also? Does service mode work for you when you dial, for example, *#0011#?
Click to expand...
Click to collapse
Yes, I uninstalled both of those. Re-installed both Service Mode and MTP Application, powered off both PC and Note 2. Rebooted, USBd Note 2 to PC and SUCCESS!!!!!!!!!
Thank you very much for your help!!!!! You are no longer a Jr. U R A SR!!!
Can someone guide me how to change MAC address in LG G4 (T-Mobile) ?
Open terminal emulator;
su
ifconfig wlan0 hw ether 00:11:22:33:44:55
andrea1493 said:
Open terminal emulator;
su
ifconfig wlan0 hw ether 00:11:22:33:44:55
Click to expand...
Click to collapse
Its not working dear.. Please guide me which file needs to be modify for wifi MAC changing
aasiaasi said:
Its not working dear.. Please guide me which file needs to be modify for wifi MAC changing
Click to expand...
Click to collapse
Mmh it's strange! Do you have root?
aasiaasi said:
Can someone guide me how to change MAC address in LG G4 (T-Mobile) ?
Click to expand...
Click to collapse
PLAYSTORE
wifi mac changer
or pri fy
andrea1493 said:
Mmh it's strange! Do you have root?
Click to expand...
Click to collapse
Yes its rooted.
Could you please tell me which files needs to be modify for MAC changing.
Sorry I don't know if it is possibile to change the mac address by modifying a file. MAC Address is a physical address, that means that it can be changed only temporarily with the Linux shell command that I've written above. In the past I've used that command on Android (with a Galaxy Note 2) and it worked! Now I don't remember if I've ever used with LG G4 when I had root permission (with Lollipop), but I can't try now because I doesn't have root access anymore, because I've upgraded to MM and I don't want to unlock the bootloader for warranty purposes
PryFi from chainfire works (usually), just be sure to make a backup of all partitions before using it. Once using the app made my IMEI disappear.
I had a moto x 2nd gen and I modified a file for MAC and it was perfectly working .
So i think there must be a file for permanently changing MAC Address. In my Lg g4 t mobile have MM 6.0
I think you need a special flasher to change MAC address but I'd love to know too
Hi There
Happy to share I been able to make Wi-Fi calling and volte working on my HTC u12+ I'm using EE UK network and finally get all works after few months of struggling..
I read what LIabTooFer said about manual activate Wi-Fi calling and volte on non branded phones
You can find that on his twitter post from August 31
https://twitter.com/LlabTooFeR/status/1035495777966153728
So I did exactly what he wrote over there but I couldn't get that working (maybe because he got HTC u11)
So I did exactly what is below
you need to be rooted and able to use any root explore or just pull files to your PC and use notepad++ or similar
DO BACKUP!!!!
edit default.xml
you can find in /system/customize/acc and if you got htc__xxx.xml which is named with your phone cid in acc folder just delete it
check lines in default.xml and edit
<item name="carrier_default_wfc_ims_enabled_bool" type="boolean">false</item>
<item name="carrier_htc_ims_setting_type_bool" type="boolean">false</item>
<item name="carrier_htc_show_volte_ui_bool" type="boolean">true</item>
<item name="carrier_htc_volte_ui_checked_bool" type="boolean">true</item>
<item name="carrier_wfc_ims_available_bool" type="boolean">true</item>
<item name="showVolteStatusBarIcon" type="boolean">true</item>
Save and reboot phone
after reboot check call setting should see options voice over lte and wifi calling
Don't know if will work for everyone as many providers use different settings
link for htc 10 US branded default.xml files for sprint tmobile us verizon and us unlocked you could use that as guide to edit your default.xml https://drive.google.com/open?id=1AKriJ7XOyHNvxkdloAPOcE4tsIUZNesY
How to enable Wi-Fi calling and volte on T-MobileUs thanks to @8bitbang
https://forum.xda-developers.com/u12-plus/themes/magisk-module-enable-volte-video-t3871444
I do not take responsibility for any bricked phones
that's only steps I did and it work for me but don't know If will for you
Risk on you
I have used HTC u11+ and HTC u 12+ and got Wi-Fi calling and Volte on both
Regards
Marcin
I'm interested in getting this to work as I had it on my HTC U11 and EE.
As I don't have that phone anymore, do you think you could share your files so I can try and do this on my phone or if anyone else has access to one of hte phones that works on EE could share them.
Will try post them later today
Jump1ng said:
I'm interested in getting this to work as I had it on my HTC U11 and EE.
As I don't have that phone anymore, do you think you could share your files so I can try and do this on my phone or if anyone else has access to one of hte phones that works on EE could share them.
Click to expand...
Click to collapse
What phone you using?
marcinkoko009 said:
What phone you using?
Click to expand...
Click to collapse
HTC U12+ as per my sig
Jump1ng said:
HTC U12+ as per my sig
Click to expand...
Click to collapse
I did edit my post so you can find all files in there
regards
marcin
Thanks, will try this out just need to find a bit of quiet time at work to mess about with the phone.
Jump1ng said:
Thanks, will try this out just need to find a bit of quiet time at work to mess about with the phone.
Click to expand...
Click to collapse
Let me know if you get it working
I can confirm that after editing default.xml
I have Volte and Wifi calling on O2 UK working on my HTC u12+ and HTC U11+
I tested using my wife O2 pay monthly sim
So I guessing it will work with any carrier if all done right
Vodafone CH & Sunrise CH
Confirm working both for Swisscom (22801) and Sunrise (22802) in Switzerland (HTC U11+ WWE) !
:good:
ouioui01 said:
Confirm working both for Swisscom (22801) and Sunrise (22802) in Switzerland (HTC U11+ WWE) !
:good:
Click to expand...
Click to collapse
That's cool mate did you find hard to do it or easy enough?
marcinkoko009 said:
That's cool mate did you find hard to do it or easy enough?
Click to expand...
Click to collapse
It's easy
Cheers
ouioui01 said:
It's easy
Cheers
Click to expand...
Click to collapse
That's good as my first language is not English and hope is all clear for everyone
Regards.
marcinkoko009 said:
Let me know if you get it working
Click to expand...
Click to collapse
Think I got the 23433 file copied up to the phone and the other files edited, can't see any wifi calling though..so not sure what I missed. Didn't see any options to push with the tool tho but I copied the file to the SDcard then used root browser to paste it in the right place.
Will see if I can spend some more time on it as maybe the reason I didn't push it is why it isn't working.
Jump1ng said:
Think I got the 23433 file copied up to the phone and the other files edited, can't see any wifi calling though..so not sure what I missed. Didn't see any options to push with the tool tho but I copied the file to the SDcard then used root browser to paste it in the right place.
Will see if I can spend some more time on it as maybe the reason I didn't push it is why it isn't working.
Click to expand...
Click to collapse
U need to boot Twrp and mount system and vendor as you can't copy through windows or os x
And use adb file manager while you in twrp link in main post
In tool there advance options and then you got adb file manager and you can go to desire folder and drag files from you PC
marcinkoko009 said:
U need to boot Twrp and mount system and vendor as you can't copy through windows or os x
And use adb file manager while you in twrp link in main post
In tool there advance options and then you got adb file manager and you can go to desire folder and drag files from you PC
Click to expand...
Click to collapse
Check picture
marcinkoko009 said:
Check picture
Click to expand...
Click to collapse
OK I see what happened I had an older version and the auto update was blocked by my AV so I know have more options to play with...OK will give it a shot again now see if I can get it going.
Edit
Got it updated and can now browse to system but it is showing as blank thats with it ticked to mount so not sure why it isn't loading that folder...using the latest twrp for the september security patch.
Edit2
Can see the files if i got to /system_root/system/customize is that the right files to change?
Jump1ng said:
OK I see what happened I had an older version and the auto update was blocked by my AV so I know have more options to play with...OK will give it a shot again now see if I can get it going.
Edit
Got it updated and can now browse to system but it is showing as blank thats with it ticked to mount so not sure why it isn't loading that folder...using the latest twrp for the september security patch.
Edit2
Can see the files if i got to /system_root/system/customize is that the right files to change?
Click to expand...
Click to collapse
yes you should see ACC MNS folders as well
put default.xml in ACC
marcinkoko009 said:
yes you should see ACC MNS folders as well
put default.xml in ACC
and 23433.xml in to MNS
and map_mns.xml in to Customize folder
Click to expand...
Click to collapse
Yeah I can see all the folders and files just wasn't sure if system_root was the right as system was blank...
OK will push up the updated files now see what happens
EDIT
Files pushed to the folders and no options for WiFi calling in my phone call settings so dunno what i messed up lol.
Jump1ng said:
Yeah I can see all the folders and files just wasn't sure if system_root was the right as system was blank...
OK will push up the updated files now see what happens
EDIT
Files pushed to the folders and no options for WiFi calling in my phone call settings so dunno what i messed up lol.
Click to expand...
Click to collapse
is your htc12+ dual sim model 2q55100 check at the rear of your phone and software 1.30.401.2 in about phone if so download this and flash with twrp
https://drive.google.com/open?id=1tmZ9qnCP2XaGIWaPCO4kyQ3QidTXkd53