Bluetooth Metadata (song title, artist, etc...) - OnePlus 3 Questions & Answers

When I connected to my Honda HRV for the first time through bluetooth, it works perfectly, displaying all the information (song title, artist, etc...)
But after that, 2nd time onwards, no information displayed (listed no title, no artist, etc..)
Song still plays perfectly....
and i noticed that when connected for the first time, on my OP3 it displays (Bluetooth Media Browsing with the contents of "Peer supports advanced feature. Re-pair from peer to enable it")
Tried on both 3.2.4 and 3.5.0, both have the same problem.
Tried clear bluetooth share data and cache, force stop, then restart and re-pair. Not working.
Tried reformat, works for the first time only again.
Anyone encounter this problem?

I have the same issue
Sent from my ONEPLUS A3003 using Tapatalk

Me too with an alpine Bluetooth heading which supports Bluetooth metadata and Bluetooth control.
Sent from my ONEPLUS A3003 using Tapatalk

Related

[Q] BlueTooth & Cars

I've tried to connect my phone via BT to two different cars and have no luck. It will scan for devices but won't find them at all. Does this happen to anyone else with the SIII? Strangely enough, it finds and connects to my JamBox is just fine.
What ROM are u on ? Stock or rooted?
What kind of cars I know my Audi A8 will connect but I always have to connect manually and enter the 1234 paswrd.
Sent from my SAMSUNG-SGH-I747 using xda premium
bbgt2 said:
What ROM are u on ? Stock or rooted?
What kind of cars I know my Audi A8 will connect but I always have to connect manually and enter the 1234 paswrd.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Still rocking the stock and unrooted for the phone. I tried on a Lexus GS and a Scion xB but no results show up. How do you connect manually? I should try that
Phone calls and bluetooth streaming works fine in my 2009 Mazda 6 (GT, no navigation). My phone is stock + root.
I use Slacker Radio everyday, launched by Automateit Pro when the connection to my car is established.
IIRC, I had to input a PIN on my phone, then in my car to do the pairing, and after that, I had to connect the phone manually to the stereo, but only once. After that, it's automatic when I start the car. Watch out for the "Only visible to paired devices" setting on your phone. It must not be checked.
I too have major issues with bluetooth, my phone connects whenever it feels like. I had to flash to cm9 to be able to listen to music in my G37. No problems in my other car (it has aftermaket pioneer system).
PS Just flashed the CM10 since they finally figured out A2DP, but the image is broken. (Note to myself: "Read the thread before flashing") Will wait for the next nightly build.
Nissan's always had a horrid BT stack in it. I'm in an 09 Altima and BT just sucks. I know it's not the phone as I've tried multiple phones from multiple vendors and they all suck. Nissan won't fix it either.
[Q] Bluetooth issue with Cars
I have AKOP Rom and KT Kernel. My bluetooth connectin to Mazda Cx-5 is fine. However, the problem I have is a lot of phone information (Song title, Battery Status) I used to have on stock, now are gone. Previously, I can fast foward or Rewind a song, also, once BT is connected, the default music player will start automatically
Can someone suggest a BT manager app which can change and enhance BT setting?
I have a 2009 Mercedes B200. My phone connects to the car just fine, but no sound comes from the speakers and no sound goes into the microphone. Same thing with my car and the HTC One X, although that was fixed with a stock ROM update. Bluetooth on cars can be very hit and miss.

[Q] Bluetooth issues in a vehicle

Hi everyone,
Got my black Z1c yesterday, love it so far!
However, when I try to use it in my car (Audi A6 2008), I cannot place a call if it was initiated from the car's interface.
The phone connects to BT no probs and shows my car in the devices list as a headset. Incoming calls are reflected on the car's display, and connected to the speaker's/mic of the car. When I place a call from the phone itself - same deal, all works as expected. But when I use the car's controls to dial a number, the car's display shows "connecting", and nothing happens...
Tried to pair/unpair many times, no success. Tried other phones, like iPhone 5, Samsung Ativ S (WP8), Samsung Galaxy S4 Active, HTC One - all work seamlessly. My old Xperia Z was working fine, until I sold it to get the Z1c... I would never expect Z1c to behave like this...
Anyone has similar issues?
Yes mine is the same (ford sync)
Sent from my D5503 using XDA Premium 4 mobile app
Hoagi said:
Bluetooth is a wireless protocol for exchanging data over short distances from fixed and mobile devices, creating personal area networks.
There are two important parameters of Bluetooth devices - class and supported profiles.
"Class" signifies the distance at which a Bluetooth connection is possible. Most mobile devices are Class 2, which means they have a range of up to 10 m. Class 1 devices are rare and have a range of up to 100 feet.
A "profile" is a type of Bluetooth connection. The most common are the Headset (HSP) and Handsfree (HFP) profiles that enable the device to connect to a wireless headset or handsfree.
Some other profiles are OBEX (OBject EXchange) which allows transfer of files, contacts and events; A2DP, which adds support for streaming of stereo sound and AVRC, which allows remote control of playback.
Click to expand...
Click to collapse
... and the reason you have posted this is...?
Aung Thiha said:
try clear caches. All kinds of caches. When I say all kinds, I mean all caches that you can clean. Retry what you want to do. If it does not help, try factory reset and retry your bluetooth connection. if it still does not help, try flash firmware. I guess this is the solution you can count on.
Click to expand...
Click to collapse
Thanks, will try. The phone was just outta box when I was trying it in my car... The car was the first BT device it has ever been paired wtih...
Phone calls work fine on mine.
BUT while we're on the topic of vehicle BT, has anyone got working song info via bluetooth? I thought it was supposed to support avrcp 1.3, but in my car (2013 Ford SYNC) I still get no info about songs I'm listening to and also the voice commands for playing artists or albums don't work.
/Daniel
I use it with my new Golf and the phone functions works as expected but the song info does not show. But they never do with Android phones. My 5s works of course
Sent from my iPhone 5s using Tapatalk
easycure1974 said:
I use it with my new Golf and the phone functions works as expected but the song info does not show. But they never do with Android phones. My 5s works of course
Click to expand...
Click to collapse
In my Toyota Auris 2013 model song info always worked with Walkman app assuming you have tags filled out correctly.
I know there were some issues with tag info in Poweramp I prefer to use but they got that fixed recently. Advanced options to display song info on external BT device is just buried deep in app's settings though.
Everything works fantastic on my BMW F10 (2012) with Navigation Professional, Bluetooth Music with Song Info, Phone with contact pictures (! Didn't even know that was possible until I got the Z10c) and full Message Access Profile with historic E-Mail and SMS access.
The In-Car integration is the main reason why I am torn between iPhone 5s and Xperia Z1c.
The iPhone has the Advantage of "BMW Apps", which allow using Webradio, Facebook, RSS Feeds etc. through the Navigation, as well as iPod Control and Coverart Display.
The Z10 can't do those things, but it can do Bluetooth MAP which is rather important to me also. Webradio can of course be streamed via BT (and controlled on the phone).

Bluetooth Connectivity Issues - Limitations?

So I have an Eonon GA1312 Single din (RK3188).
I have been having two bluetooth issues. All have been troubleshot by disabling and enabling/deleteing data/cache of Bluetooth app, different settings and "off" in factory settings for bluetooth tab and a reload of malasyk rom after a factory reset.
Bluetooth will always show every device it sees. I have 6 Devices under "available devices". 2 I know of (game pad and OBD). 4 were because things were in range when scanning. They persist through everything. It's so weird.
Secondly, the ODB, while off is "available", but once conmected it jumps to "paired" devices and connects no problem. My game pad (nes30 pro to test the viability of bluetooth media control without buying one) is there whether in range, on, or not, and if I try to connect, I tap it, I am asked if I want to connect, and it does nothing.
My cellphones connect fine.
I read all over about some bluetooth limitations but found nothing documented on tje wiki or in the forum.
Any help? Sorry if repost, I thought I made a thread but it says it isn't there and I have no move/deleted notices.
Bump for justice.

Semi-stock 5.1.1 and bluetooth media sound problem

Dear all,
I'm running DstrikerZ1 Kai ROM that is based on Stock 5.1.1 Lollipop.
I have a problem with bluetooth and my handfree carkit (Parrot Mki9000).
It used to work fine with KitKat.
Now, when my z1c auto-connect to this, the "Media sound" is disabled. I have to manually check its checkbox and the media sound connect & works (like music streaming or navigation voice).
The strange thing is that this happens only with my bluetooth carkit. When I use any other bluetooth device, "Media sound" is active at connection.
As I wrote above, it used to work a few days ago when I was running KitKat. I already tried to remove the device from the bluetooth menu and reconnect.
I would like to avoid any other 3rd party app from the google play (except Tasker, that unfortunately could not help here).
Is this some sort of know problem? Is there a permanent fix?
Thanks for any hints.
MJ

Bluetooth always reconnecting in car

The problem is to connect Bluetooth on a Moto Z Play Android 7.1.1 patchlevel 2/2018 (current in reteu, was same result with Android 6.0.1 12/2016) with a Volvo XC40 car.
The first pairing with Bluetooth succeeds for a second. Then, nearly immediately, both displays (car and mobile) show reconnecting for about 10 seconds. It has a connect for a fraction of a second, and then is reconnecting and so on.
Trying flight mode and then only Bluetooth enabled on the mobile did not help. IIRC it showed some message about "My Volvo Carnull not bonded" (the name of the car for Bluetooth is "My Volvo Car" and some message with typo, something like "conecnting not successful". After that I rebooted, result was the state before with reconnecting.
Did try this several times. Also did try to reduce the amount of Bluetooth access types the car tries. There are 4 connected: phone, audio, internet, contacts. Did also not help.
Has anyone an idea how to get a successful connection or what the cause of the problem is? Did search for similar problems with Bluetooth in cars, but could not find anything (except for that hint with flight mode which did not help).
What I tried by now:
- Flight mode, only Bluetooth (as already mentioned). No change
- Remove all bluetooth connections. Pair new. No change
- Delete data for sytem app "Bluetooth Freigabe". No change
All other bluetooth connections are working fine. Another Moto Z Play using Android 7.0 (01/2017) is working flawlessly with that car. Strange for me is that it didn't work on 6.0.1 in the same way it does now fail on 7.1.1, but the other Moto Z Play using 7.0 is connecting stable.
Still the question: Does anyone have an idea how to get the connection working?
Factory reset?
I see that you deleted all bt connection but do you have some apps that are using bt? Like for smartwatch, headphones...?
I have Amazfit and watch must be connected to be able to pair a new device. Drow me crazy first time when I had that problem. I thought that car audio is broken, then phone... After pairing, watch doesn't have to be connected to reconnect.
Sent from my KFSUWI using Tapatalk
Zeljko1234 said:
Factory reset?
Click to expand...
Click to collapse
I was afraid this reply could come. When doing a factory reset, I do following: Pack /data/media somewhere because Nandroid omits this. Backup all partitions using twrp. Backup all apk using adb. Export SMS. Export contacts. Screenshots of the launcher screens. All this takes about 2-3 hours. Then I struggle a week until my device behaves like before. I'd be willing to do it if I saw a reason why it could help.
Zeljko1234 said:
I see that you deleted all bt connection but do you have some apps that are using bt? Like for smartwatch, headphones...?
Click to expand...
Click to collapse
Headphone, yes, there is August EP650 configuration tool that is not necessary. Thank you for the hint, will try it. Also I read somewhere it may help to delete cache partition, that's also worth a try before doing factory reset. Maybe I'll wait for Oreo before trying factory reset, could be they fixed some bug there.
Edit: BatOn which shows Bluetooth battery for external devices could also be the culprit.
Zeljko1234 said:
I have Amazfit and watch must be connected to be able to pair a new device. Drow me crazy first time when I had that problem. I thought that car audio is broken, then phone... After pairing, watch doesn't have to be connected to reconnect.
Click to expand...
Click to collapse
That's a strange behavior indeed. Amazfit seems to do something wrong.
It doesn't get any better if you upgrade to Oreo, I've been having problems with my Moto Z play disconnecting and reconnecting to the radio in my Corolla constantly ever since I went up to nougat. To be honest I just bought a good pair of headphones and stopped using the radio. Good luck though, if someone finds something that helps let me know.
I'm using bt with car audio, headphones, smartwatch... No problems at all, except one with Amazfit. And that is related to their bt implementation, not Moto fault.
Sent from my KFSUWI using Tapatalk
Seems the last action to remove Bluetooth related apps was the right one . There were two apps installed:
1. BatOn showing the state of battery of connected Bluetooth device
2. August configuration app for August EP650 headset
Removed both as they are usually not needed and it seems to work now. Will see later if it only worked for the short test I did today (currently I try to avoid driving because of an injury) or if it keeps stable.
Good, you didn't have to factory reset after all
Sent from my XT1635-02 using Tapatalk

Categories

Resources