Hi,
My M9 is bootloader unlocked and S-ON, it's running ARHD12.0 which is lollipop.
I want to use ARHD20.0 which is Marshmallow.
What is the best way to update boot or firmware to support Marshmallow?
I am on TWRP 2.8.7 but I can't run TWRP 3.0.x coz it need 6.0 support as well (I think).
Thanks in advance for any help and suggestion.
Run MM RUU
side_flip15 said:
Run MM RUU
Click to expand...
Click to collapse
Thank you for your reply. Do you know if I need to restore anything to stock b4 I run RUU? (I assume you mean the exe version from HTC)
Thanks again,
Since your are s-on you need to relock your bootloader before running RUU.exe
Make sure your RUU is compatible with your current mid/cid
side_flip15 said:
Since your are s-on you need to relock your bootloader before running RUU.exe
Make sure your RUU is compatible with your current mid/cid
Click to expand...
Click to collapse
I might have did it b4 but I don't remember... Do I need to flash stock recovery b4 relock the bootloader?
Thanks again,
Only locked/relocked BL is the requirement
side_flip15 said:
Only locked/relocked BL is the requirement
Click to expand...
Click to collapse
Works great, thanks a lot for your help..:good:
Related
Can I downgrade my Verizon M8 to 4.4.3?
aaronfrickinaustin said:
Can I downgrade my Verizon M8 to 4.4.3?
Click to expand...
Click to collapse
Quite sure you can, just find the VZW 4.4.3 firmware and flash it then flash a 4.4.3 ROM. Or if there is a 4.4.3 RUU you could do that as it'll flash everything including firmware, ROM, etc.
You need to be S-OFF to flash firmware or do an RUU though.
S1L3nTShaDoWz said:
Quite sure you can, just find the VZW 4.4.3 firmware and flash it then flash a 4.4.3 ROM. Or if there is a 4.4.3 RUU you could do that as it'll flash everything including firmware, ROM, etc.
You need to be S-OFF to flash firmware or do an RUU though.
Click to expand...
Click to collapse
I'm not S-OFF, is there any way to do it, or do I just have to wait until I can get S-OFF on 4.4.4?
aaronfrickinaustin said:
I'm not S-OFF, is there any way to do it, or do I just have to wait until I can get S-OFF on 4.4.4?
Click to expand...
Click to collapse
If you took the official 4.4.4 update you will have to wait for S-off , m sure Sunshine devs will create an exploit
If I'm right you probably don't even have an unlocked boot loader correct me if I'm wrong
spinninbsod said:
If I'm right you probably don't even have an unlocked boot loader correct me if I'm wrong
Click to expand...
Click to collapse
Nope, no idea how, I haven't had an HTC phone on VZW since my Incredible tbh
aaronfrickinaustin said:
Can I downgrade my Verizon M8 to 4.4.3?
Click to expand...
Click to collapse
I'd like to know this as well, but for a Rogers Canada HTC One M8. I can't find a clear answer with step by steps on how to do this.
sterod said:
I'd like to know this as well, but for a Rogers Canada HTC One M8. I can't find a clear answer with step by steps on how to do this.
Click to expand...
Click to collapse
Its not clear what you or the OP are asking exactly. If the intent is to "downgrade" to run firewater, then NO you can't do it.
If already s-off, just flash the desired firmware by fastboot and restore a stock nandroid.
redpoint73 said:
Its not clear what you or the OP are asking exactly. If the intent is to "downgrade" to run firewater, then NO you can't do it.
If already s-off, just flash the desired firmware by fastboot and restore a stock nandroid.
Click to expand...
Click to collapse
Not looking to run firewater. Just want to go back to 4.4.3. Running the stock rom, got the OTA 4.4.4 last week and don't like it.
redpoint73 said:
Its not clear what you or the OP are asking exactly. If the intent is to "downgrade" to run firewater, then NO you can't do it.
If already s-off, just flash the desired firmware by fastboot and restore a stock nandroid.
Click to expand...
Click to collapse
That's what I wanted to know, thanks
This kinda sucks. Broke my original M8 and the replacement came with 4.4.4 on it so I'm stuck with a stock HTC phone. I want my GPE 5.0 ROM back! Stupid Verizon.
If I want to convert my carrier locked m8, Vodafone, to 401 unlocked, what is the correct steps and sequence ?
Am I right with this...
1. S-off with sunshine after taking out box AND before taking any ota updates.
2. Install custom recovery. (So I can flash stock 401 ROM)
3. Flash firmware that matches ROM
4. Flash stock recovery.
The only real doubts I have are the order of steps especially firmware and ROM.
Is it firmware or ROM first ?
Thanks
Sent from M8
Hi,
If it's a GSM phone, Here's the guide for it,
http://forum.xda-developers.com/showthread.php?t=2708567
Good luck!
Thanks for reply but it's not sim unlock I want. I want to convert it from Vodafone UK software to stock wwe, 401, system.
I know the steps, just wondering that I've got the correct sequence in my op.
It is gsm because it's a UK phone.
Thanks
Sent from M8
10rdan said:
Thanks for reply but it's not sim unlock I want. I want to convert it from Vodafone UK software to stock wwe, 401, system.
I know the steps, just wondering that I've got the correct sequence in my op.
It is gsm because it's a UK phone.
Thanks
Sent from M8
Click to expand...
Click to collapse
the only drawback to doing the firmware after the rom is the rom will not have wifi on the old firmware
So the correct order is
unlock bootloader
flash custom recovery / root
s-off
flash firmware
flash rom
flash stock recovery
take updates
clsA said:
the only drawback to doing the firmware after the rom is the rom will not have wifi on the old firmware
So the correct order is
unlock bootloader
flash custom recovery / root
s-off
flash firmware
flash rom
flash stock recovery
take updates
Click to expand...
Click to collapse
Ok, thanks. Just wanted it confirmed before I "melted" the phone.
Sent from M8
clsA said:
the only drawback to doing the firmware after the rom is the rom will not have wifi on the old firmware
So the correct order is
unlock bootloader
flash custom recovery / root
s-off
flash firmware
flash rom
flash stock recovery
take updates
Click to expand...
Click to collapse
Been thinking about this, cause I like to have things clear before starting.
If I s-off with sunshine, because it will unlock bootloader without using HTCdev, then
1. Flash TWRP
2. Take nand
3. Then run this https://www.androidfilehost.com/?fid=95784891001609293
4. Take any ota updates
Will that remove the need to flash 401 firmware, ROM and stock recovery as 3 individual processes ?
Thanks
Edit, will change cid to HTC__001 before running RUU.
Sent from M8
10rdan said:
Been thinking about this, cause I like to have things clear before starting.
If I s-off with sunshine, because it will unlock bootloader without using HTCdev, then
1. Flash TWRP
2. Take nand
3. Then run this https://www.androidfilehost.com/?fid=95784891001609293
4. Take any ota updates
Will that remove the need to flash 401 firmware, ROM and stock recovery as 3 individual processes ?
Thanks
Edit, will change cid to HTC__001 before running RUU.
Sent from M8
Click to expand...
Click to collapse
The RUU will certainly shorten the update process ...Running Sunshine to unlock the bootloader without Root could be a problem
clsA said:
The RUU will certainly shorten the update process ...Running Sunshine to unlock the bootloader without Root could be a problem
Click to expand...
Click to collapse
Sunshine unlocked my bootloader ok with the m8 I'm using just now. Can't remember which hboot I was on at the time. Wasn't rooted, completely stock.
That's why I intend using sunshine BEFORE I take any ota updates, ie, as soon as I get it out the box.
Didn't use sunshine to, primarily, unlock bootloader at the time. It was a welcome "extra".
Cheers
Edit
Copied from Sunshine web site........
SunShine unlocks your device's bootloader and sets it to s-off (HTC ONLY). SunShine does NOT install root binaries on the device. There are a few ways to root your device after using SunShine. The most common and reliable method would be to flash TWRP recovery to your device via fastboot, and flash the root binaries or a rooted ROM from within TWRP.
Sent from M8
Did this yesterday on my new m8. Worked flawlessly with temp root. Rooted after using adb and flashed SuperSU.
Same Question...
So, i've been reading a lot but still don't understand everything right...
I already use sunshine and now my AT&T (4.4.3 by RUU (this)) is s-off and bootloader unlocked. What should be my next step? Just run that RUU that you post will work? And after that i can flash any ROM that need 4.4.4?
guire01 said:
So, i've been reading a lot but still don't understand everything right...
I already use sunshine and now my AT&T (4.4.3 by RUU (this)) is s-off and bootloader unlocked. What should be my next step? Just run that RUU that you post will work? And after that i can flash any ROM that need 4.4.4?
Click to expand...
Click to collapse
What are you trying to do exactly? If your intent is to convert to WWE version, or run the phone on non-AT&T networks, that what you describe is probably right.
If you intend to just update firmware and run the phone on AT&T's network, I don't personally recommend the WWE firmware, as it has caused issues for a lot of folks on AT&T.
redpoint73 said:
What are you trying to do exactly? If your intent is to convert to WWE version, or run the phone on non-AT&T networks, that what you describe is probably right.
If you intend to just update firmware and run the phone on AT&T's network, I don't personally recommend the WWE firmware, as it has caused issues for a lot of folks on AT&T.
Click to expand...
Click to collapse
Thanks for answer! I Already use my phone on non-AT&T netwoorks, as i am from Brazil. I also planning flash Android Revolution or maybe SkyDragon, and both require 4.4.4.
guire01 said:
Thanks for answer! I Already use my phone on non-AT&T netwoorks, as i am from Brazil. I also planning flash Android Revolution or maybe SkyDragon, and both require 4.4.4.
Click to expand...
Click to collapse
You just need to update the firmware, not run the entire RUU. Instruction here: http://forum.xda-developers.com/showthread.php?t=2696282
RUU will do it too, but it seems a bit overkill for what you are trying to do.
redpoint73 said:
You just need to update the firmware, not run the entire RUU. Instruction here: http://forum.xda-developers.com/showthread.php?t=2696282
RUU will do it too, but it seems a bit overkill for what you are trying to do.
Click to expand...
Click to collapse
Ok, i'll update just the firmware, but everytime i read about i got lost... For this, do i need to change CID and MID on my phone? Or i can get any firmware and flash since i am with s-off?
hey guys
iam on IC ROM Lollipop , i can flash Stock Ruu .exe to going back to stock?
Jwtiyar said:
hey guys
iam on IC ROM Lollipop , i can flash Stock Ruu .exe to going back to stock?
Click to expand...
Click to collapse
yes you can, if your s-on, you will have to relock the bootloader first, if your s-off then no need, this is as long as there is an RUU for your phone.
Seanie280672 said:
yes you can, if your s-on, you will have to relock the bootloader first, if your s-off then no need, this is as long as there is an RUU for your phone.
Click to expand...
Click to collapse
thank you , iam s-off
Hi ! the tittle says it all, I'm on cm13 right now so unlocked bootloader and twrp on. How can I flash the new firmware without going the S-off route ??? Sorry for noobness !
you cant.. I my self am in the same boat i think im going to pay the man 25 or 30 w.e it is to get s-off on my AT&T model so i can enjoy the new update.
dincdoes.me said:
you cant.. I my self am in the same boat i think im going to pay the man 25 or 30 w.e it is to get s-off on my AT&T model so i can enjoy the new update.
Click to expand...
Click to collapse
can I just get back to stock and get the update ??
NOTilyass said:
can I just get back to stock and get the update ??
Click to expand...
Click to collapse
I believe that you need to lock the bootloader first before you accept the update
dincdoes.me said:
you cant.. I my self am in the same boat i think im going to pay the man 25 or 30 w.e it is to get s-off on my AT&T model so i can enjoy the new update.
Click to expand...
Click to collapse
well you can check this http://forum.xda-developers.com/one-m9/general/stock-nand-backup-ota-update-collection-t3132698
and http://forum.xda-developers.com/showpost.php?p=62184307&postcount=405
Edit: those links for getting ur device in stock state not flashing MM firmware but i found it useful to share
The linked instructions are obsolete since the backups they were made for do not exist anymore. The updated instructions and the revised backups can be found in my google sheet (a link is in my signature).
But be informed that there is no official MM update for other versions of the M9 than the developer and the unlocked US version. If you want MM on any of the other models you need either S-OFF, sneakyghosts firmware package and the latest Viper rom or S-OFF and all files found in clsA's instructions for converting your M9 to a developer edition.
the Only way to back is flash RUU.and the cid must same and RUU's version must equal or higher than your M9 have
oliver962464 said:
the Only way to back is flash RUU.and the cid must same and RUU's version must equal or higher than your M9 have
Click to expand...
Click to collapse
That's not true. If you follow the instructions in my google sheet then you can use a TWRP backup, too.
That's not true. If you follow the instructions in my google sheet then you can use a TWRP backup, too.
Click to expand...
Click to collapse
sry for my bad memory.You can also use TWRP restore other's backup. Thx for remind.
oliver962464 said:
the Only way to back is flash RUU.and the cid must same and RUU's version must equal or higher than your M9 have
Click to expand...
Click to collapse
Mine is HTC__J15, 0PJA10000. Which RUU should I use ? and I should lock the bootloader then ruu ??
NOTilyass said:
Mine is HTC__J15, 0PJA10000. Which RUU should I use ? and I should lock the bootloader then ruu ??
Click to expand...
Click to collapse
If there only was a google sheet with the information you need...
Flippy498 said:
If there only was a google sheet with the information you need...
Click to expand...
Click to collapse
Thanks for all the help! but I can't find the RUU for 2.10.401.1 ??
NOTilyass said:
Thanks for all the help! but I can't find the RUU for 2.10.401.1 ??
Click to expand...
Click to collapse
A working RUU for 2.10.401.1 doesn't exist and I didn't want to bother myself with uploading the existing broken one. Use the TWRP backup.
Flippy498 said:
A working RUU for 2.10.401.1 doesn't exist and I didn't want to bother myself with uploading the existing broken one. Use the TWRP backup.
Click to expand...
Click to collapse
what twrp backup ??
NOTilyass said:
what twrp backup ??
Click to expand...
Click to collapse
The one in my google sheet?! (The least thing you can do is read if I've already given you the needed link. )
Flippy498 said:
The one in my google sheet?! (The least thing you can do is read if I've already given you the needed link. )
Click to expand...
Click to collapse
will the bootloader be locked after the twrp back up thing ??
NOTilyass said:
will the bootloader be locked after the twrp back up thing ??
Click to expand...
Click to collapse
The bootloader only gets locked if you relock it with fastboot. (And because many people here seem to be missinformed: There is no need to relock if you want to install OTAs or flash a RUU.zip. The only things that don't work with S-ON and an unlocked bootloader are using a RUU.exe and flashing official firmware packs with fastboot.)
Flippy498 said:
The bootloader only gets locked if you relock it with fastboot. (And because many people here seem to be missinformed: There is no need to relock if you want to install OTAs or flash a RUU.zip. The only things that don't work with S-ON and an unlocked bootloader are using a RUU.exe and flashing official firmware packs with fastboot.)
Click to expand...
Click to collapse
Thank you !
Hey, I had the M7 but my friend now came with an m8.
He wants to downgrade to lollipop, where I found a ruu for. He is on Android 6 (Thats what he says) and wants to go back to 5.0 Lollipop.
Now my question is:
He is S Off and Unlocked bootloader.
I think he has to relock bootloader right?
And also, do i have to flash the Firmware.zip first like in the M7? I mean he is S off, so running the Exe should be it right?
Thanks for Help already
No need to flash firmware.Just search for stock lollipop rom and flash it.
bombo_b said:
No need to flash firmware.Just search for stock lollipop rom and flash it.
Click to expand...
Click to collapse
Only Ruu exe right?
XxpikaachuuxX said:
Only Ruu exe right?
Click to expand...
Click to collapse
Either one will work. exe or zip.