Hi,
when I get called on my paired bluedio BS-2 speakers on my op3 with oxygen 3.2.2, the ringtone played by the speaker is different (and much lower, just some dings) than the one played by the phone speakers.
Since I would need the speaker to hear better the ringtone in other places of my house, can anyone suggest a way to change the ringtone on the speaker?
Is that a built in feature in the speakers and not customizable?
thanks
g,
same problem, no solution
Hi!
I've the same problem and looking for a solution, too. What I an add as information, that it does'nt depends on the bluetooth device. I use bluetooth headphones and have bluetooth connection with the car radio and on both devices, when somebody calls me, the OP3-Speaker is ringing with the ringtone I choose, but the car radio or the headphones ring with something completly different but same - sounds like "old telephone"
I've already searched through all settings but without success, does anybody have an idea?
Regards,
Christian
Related
First of all, I would like to says big thank to all rom cooker. You all did a very great roms. However, I still have a little problem that annoy me a lot...
I had connected the stero bluetooth headset with Hermes and choose both "Wireless Stero" and "Headset" profiles in bluetooth setting.
Then when there is incomming call, the Hermes will not ring. So I had a lot of miss calls.
However, if I disable the "Wireless Stero" profile in bluetooth setting, the Hermes will ring normally.
I used to use the Prophet before and there is no problem. The Prophet will ring normally although I choose both profiles.
The stero bluetooth headset is the same, iTech Clip Radio.
I had tried on many roms and found the same problem. So I guess that maybe I have to modify the registry setting to enable ringing on "Wireless Stero" profiles. Can somebody help me to solve the problem please???
I have the same issue and assumed that's how it worked since I just got this Jabra BT8040 that supports wireless stereo. It would only ring through my headset when wireless stero was enabled. If there is a way to get the phone to ring also that would be great. Right now I do the same thing as you, disable the wireless stereo until I need to use it.
My guess is this is by design since all sound is routed to stereo headset then so would the ringer. This isn't an issue for me since the Jabra BT8010 I can turn on/off stereo by simply pressing a button on the headset.
Sorry don't know of a solution.
Thinking about it I guess you could use something like mortscript and make a button that turns stereo pairing on/off to make it simpler I dunno.
I have similar issues with the PAYS rom, when listening to music via my BT earpice (Jabra) where you click the answer button on the earpice it then takes the music from the device and plays it through the jabra ONLY for about 5 seconds and then defaults back to the device?
Any suggestions would be appreciated?
Hey,
I think I am not the only one who uses regular 3,5mm headphones (no headset) to listen to music on my Touch HD.
When getting a call its quite annoying that you have to pull out the headphones all the time (apart from that it will result in a defective contact after some time).
So it would be really nice if someone can make a little app that will just disable the complete headset profile as soon as you get a call and that will enable it again after the call has ended. would be great if someone can code that little app! I have no developer-experience at all but I guess it shouldn't be a big deal...
no one else who would find this app useful?
I could use such a program in my car, I uses the 3.5 jack to transfer music to my car stereo and if i am listening to the radio i cant hear the incoming calls.
in my tp2 i noticed that when i have a wired or bluethooth headset conected and someone calls me it only rings in the headphones! this made me lose several phone calls.
in other devices i had , i used a reg hack for it to ring in the device speaker and headphone,so i tried in my tp2 but it does not work as the reg hack is related to the microsoft bluethooth stack.
therefore i m asking for help and also if other tp2 users can confirm this issue.
my bt heaset is a jabra bt3030.
thanks
I am having the same problem with my TP2, the headset becomes useless for this reason.
I use a Sennheiser MM-200 headset, bought this headset not to have earphones plugged in ears all time but only when i have incoming call.
Not sure what to tell you about the wired headset, but is your BT using the normal headset BT profile or is it connecting also with A2DP/Stero BT? That could be part of the problem.
In the Bluetooth menu it is connected with: "Stereo Audio" and "Hands-free"
you can switch off the stereo audio function and stay with the hans-free function only. it works fine, but you have to do it manually.
wolfgang
I made a soft reset and now the phone rings even with stereo audio enabled - whats good for me, but i do not understand why
Hi Faria,
There is a setting in the BT config to transfer "ALL" system sounds to the connected audio device, this may be your issue. I don't use a wired but my Rhodium rings in the headset and on the device after removing this option.
Cheers,
Beasty
I really hate this feature too. I am used to listening to music on my BT hedset. So when I get home I would just take them off, put the phone on my desk and go about my business. But if I don't disconnect the headset now I won't notice it ringing... which can lose in lost phone calls.
Hopefully someone will find a workaround.
Start>Settings>Connections>Bluetooth
First tab (gears)>Advanced>Audio
"Play system sounds on remote hands-free device" = uncheck
Just tested and works for me.
I get the normal ringtone from the phone and the regular "beep" from the stereo headset.
FYI, this is basically the same information as listed two posts up...
On my old phone if my headset was in and my phone rang it would say call from and state the persons name through my headset. The ringer itself wouldn't play through my headset nor the phone. And now I can't remember but I know it beeps in my ear but I think the phone plays the actual ringer also at the same time. But if I checkmark what you guys are unchecking will the actual ringer play through my plantronics bt headset and not on the phone.. I kind of would like that for if I am out and dont' want my phone to ring all loud I would rather the ringer play in my ear and was wondering if that's what happens when I check that. Mine was unchecked when I got the phone.. I don't havea bt headset I use for music just talking mostly when driving..
Please help me before i go crazy on this!
I bought a new handsfree (Plantronics Voyager 520) hoping it was something wrong with my old one.
So my problem is that when I use my handsfree I hear alot of noises and sometimes I can´t even hear the other part because of that. But it seems to be only me that hear this, not the one I talk to.
I tried changing the Linespeed value in registry, but that didn´t help.
Maybe if I flash a new radio??
I have searched, but havn´t found any help. Dont know if this is a known problem?
Someone knows?
It seems to be something with the reception. All i hear is alot of cracking noise.
I have also tried with my Jabra BT3030 and the sound is good. But not when im using any of my headsets.
I, too, use a Plantronics 520 with my AT&T Tilt2. I hear lots of snap, crackle and pop but the other party does not hear it.
Anybody?
using a Plantronics Discovery 925 and it's pretty clear. No call quality complaints from both sides. Only complaint I have is it picks up too well sometimes the other party can hear some unwanted noises...
I havn´t found a solution to this problem. Someone else have a good idea??
Double post
I use a Jabra Dogtag with the touch pro2, i have clear sound in music and phone works also good.
Even the play, next and prev keys work perfect.
Try going to the bluetooth menu and activate stereo sound instead of headset (Maybe
Or turn off secure connection.
This might not help, but who knows
MikeAffec said:
I use a Jabra Dogtag with the touch pro2, i have clear sound in music and phone works also good.
Even the play, next and prev keys work perfect.
Try going to the bluetooth menu and activate stereo sound instead of headset (Maybe
Or turn off secure connection.
This might not help, but who knows
Click to expand...
Click to collapse
By Dogtag, you mean BT3030?? I have one of those also and it´s working for me. But when i connect to one of my hedsets it´s very bad sound.
I have an old SE and a new Plantronics, but same issue with both. But only when i connect those to my TP2. Both those are mono-headset you put on your ear.
When I plug my headphones into my Evo the notification sounds still play through the external speaker. The only way to stop them from playing through the external speaker is to put it on vibrate or silent. But then that stops the notifications from playing through the headset too.
Does anyone have a fix or a workaround? Is this just an HTC Sense issue or is this a problem with android? I've looked into using tasker to disable the external speaker when a headset is hooked up but I haven't been able to figure out a way to make that work. Tasker seems to rely on the profiles and none of them support this.
There's a ticket open here: http://code.google.com/p/android/issues/detail?id=6696. But for some crazy reason this is considered an enhancement. I think this is a pretty serious bug. I mean, who would want ANY sounds coming from the external speaker while a headset is attached?
I feel your pain. Whenever I'm listening to music w/ my headphones, my roommate is able to hear my SMS notifications through my speaker =(
so, uh, bump....anyone have any luck finding a solution to this? doesn't seem to have been fixed with 3.29...
Also interested in this. I was in the library listening to pandora on my headset and I got a call...and the ring played through the speakers! Ahhhh...we need a solution to this!
Swyped from an HTC Evo on MetroPCS...