Wrong batterie status - One (M8) Q&A, Help & Troubleshooting

Dear xda community!
I have a problem with my batterie status on my htc one m8. Sometimes i have like 20% and then the phone shuts down. When i turn on again it says, that the batterie is empty. I had this problem with stock (Marshmallow) and now i have it with cyanogenmod(Marshmallow) again. But i had that issue on stock Lollipop as well.
Is that a known issue and is there a fix for it?
Thank you!

Me too i have a probleme..i charged my phone 80% when i power off my phone at night... tomorrow i show 88%

BerniBoern said:
Dear xda community!
I have a problem with my batterie status on my htc one m8. Sometimes i have like 20% and then the phone shuts down. When i turn on again it says, that the batterie is empty. I had this problem with stock (Marshmallow) and now i have it with cyanogenmod(Marshmallow) again. But i had that issue on stock Lollipop as well.
Is that a known issue and is there a fix for it?
Thank you!
Click to expand...
Click to collapse
Try battery calibrate.
Power off device .
Charge for 10-15 min
Hold
(Vol+) (vol-) (power ). All at same time
Phone will restart serval time .
Do this 3-4 min.
znayver said:
Me too i have a probleme..i charged my phone 80% when i power off my phone at night... tomorrow i show 88%
Click to expand...
Click to collapse
Sent from my XT1526 using Tapatalk

@sonnu0100 What do you mean Charge for 10-15 min ????Did you mean to come down my htc m8 to 0% level and charge it 10-15 min

sonnu0100 said:
Try battery calibrate.
Power off device .
Charge for 10-15 min
Hold
(Vol+) (vol-) (power ). All at same time
Phone will restart serval time .
Do this 3-4 min.
Click to expand...
Click to collapse
i dont understand what you mean with " Do this 3-4 min. ".
when i press these buttons, the phone starts normally, just few things like date where reset.
the phone hasnt restarted serveral times.. so how should i do this 3-4 min?

BerniBoern said:
i dont understand what you mean with " Do this 3-4 min. ".
when i press these buttons, the phone starts normally, just few things like date where reset.
the phone hasnt restarted serveral times.. so how should i do this 3-4 min?
Click to expand...
Click to collapse
Search google , how to clibrate htc m8 battery you will get whole process.
@znayver Dnt discharge your phone battery completely . keep it above 50%.
Swtich off phone .
Connect charger .
Let it charge it for 10-15 min ( the battery status will be arround 60%)
Then follow the steps.
BerniBoern said:
i dont understand what you mean with " Do this 3-4 min. ".
when i press these buttons, the phone starts normally, just few things like date where reset.
the phone hasnt restarted serveral times.. so how should i do this 3-4 min?
Click to expand...
Click to collapse
When you press all the button at same time, phone will not boot to system .
It will go to htc logo and restart again . keep holding the keys continusly for 3-4 min . phone will restart serval time during this process.
Sent from my XT1526 using Tapatalk

battery change , that worked for me , everything works fine

Related

[Solved]Red led light ,phone won't turn on

Well yesterday I flashed P.A.C Rom and when the device battery was on 0% the phone shuted down and after that I connected it to the charger to charge it again but I have a red light and the device doesn't reacts. Tried to to hard reset and everything but It doesn't helps.
Please help
I had this problem as well. You have to wait till your phone turns on (takes 10-15 mins) and boot into recovery. Flash another kernel with offline charging and it should work from there
Sent from my Xperia S using xda premium
daboom96 said:
I had this problem as well. You have to wait till your phone turns on (takes 10-15 mins) and boot into recovery. Flash another kernel with offline charging and it should work from there
Sent from my Xperia S using xda premium
Click to expand...
Click to collapse
Can you explain please which kernel should I flash?
Phone boots for 5 sec every 15 minutes and then it turning off again.
if you drained the battery during flashing to absolute 0% then it wont turn on immediately when you plug in the charger..wait for about 30minutes before starting the phone again..and dont flash when you are low on juice..always keep at least 50% battery :good:
Ok ,everything is ok now. I had another replacement battery so I used it and flashed stock rom on the device. After that changed to the original battery again and charged the phone offline.

Htc One X 4.2.2 Power setting history not refreshing after Proper Shutdown :(

I got the 4.2.2 sense 5 update on my htc one x . I'm just noticing one strange thing... As I switched off my phone with power save on + fastboot on, power saver on + fast boot off, power saver off + fast boot on(this took time to shut down like proper shut down), both power save and fast boot off, all the possible way, but when I go to power setting in all cases, I see that in "history" that time is not starting again, its already high like 1 hr some minutes going more n more still, like the phone was never switched off properly!
I know earlier in 4.1.1 if power save weather off or on, but in fast boot on the phone is not properly shut down... but if fast boot is off then the history refreshes which use to tell us that the phone was properly shut down. But in above case nothing is working!!
Is it a big problem of battery drain or anything, Any accurate clue please ?
I have not done factory reset, but have done clear cache partition ... still nothing....
Should I factory reset then ?
hold the power button for 5 sec...it should reset the phone
nizuak said:
hold the power button for 5 sec...it should reset the phone
Click to expand...
Click to collapse
You mean the soft reset?! That makes phone restart?! If yes then that's also not working
Sent from my B1-A71 using xda app-developers app
try the batt test frm the test menu(*#*#3424#*#*)...
it's fine now, I did a factory reset and it did reset the history time (my battery was low that time) . After that when I switched off my phone and powered it back on (with power save on and fast boot off) still the history time was picking up from where it stopped . So I kept my phone on charging, didn't even do the wipe cache partition or anything . And as I woke up today, I switched off and turned on again and history got refreshed and even restarted in same settings and again history got refreshed!! Yuppie its all perfect now and after factory reset its still all super smooth!
Just battery was draining little fast, then I noticed there's a hidden facebook update, after that update the battery drain is happening slower like really normal, still maybe if required a patch might do better .
Thank you all still!
Battery stats reset when the phone is charged to 95% I believe
Sent from my HTC One X using xda app-developers app
treebill said:
Battery stats reset when the phone is charged to 95% I believe
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
you are absolutely right, its something like that for sure.... as now when my battery was around 55% and I did restart in power save on and fast boot off,,,, the history time did not refreshed... so I guess its nothing to worry about and its little less than normal drain for me and gets very normal drain after 70% ! its I think htc made Something new to make things ready for us fast, which is making battery drain little faster on hox being 1800 mah, but would not be impacting much on htc one m7 I believe .

Cannot reset SW3 ;(

Hi,
it just stop and hang this morning, the screen hold at the moment it hang .... i tried hold the power key for >15 sec but not respond .... bluetooth no respond too ....
so what can i do? other then wait for the battery die out?
please help!
thanks!
Joseph
Josephzhu said:
Hi,
it just stop and hang this morning, the screen hold at the moment it hang .... i tried hold the power key for >15 sec but not respond .... bluetooth no respond too ....
so what can i do? other then wait for the battery die out?
please help!
thanks!
Joseph
Click to expand...
Click to collapse
I'm having the exact same issue, screen isn't responding and won't switch off, despite how long I hold in the power button.
Anyone got any suggestions?
Same here. Someone can help?
Ok, mine eventually died.
Whatever happened was draining the battery as the watch was warm the whole time (instead of my normal 2-3 days, it died in around 4-5 hours).
Plus point is that after plugging it in to charge, it switched back on and is currently working fine, it's sitting on my desk charging now. However am more than a little concerned about this happening again.
I've had same issue twice - first time when installing TWRP recovery (understandable ) and today having a lot of saves to watch creating a watch face. Both times reacting like,
st0nec01d said:
Whatever happened was draining the battery as the watch was warm the whole time (instead of my normal 2-3 days, it died in around 4-5 hours).
Plus point is that after plugging it in to charge, it switched back on and is currently working fine, it's sitting on my desk charging now. However am more than a little concerned about this happening again.
Click to expand...
Click to collapse
I think there is a memory leak in software.
I've had a major issue where the watch turns off local Bluetooth after getting hot. The only way to turn Bluetooth on again is to turn the watch off and then charge to 100%, last turn on again and then reconnect.
This started after the 5.0.1 Update.
Sent from my D5803 using XDA Free mobile app
The same issue
Hi!
I have the same issue. Sony SW 3 is connected to Sony Xperia Z Ultra. This issue is the second one, the first time I managed to reset SSW 3 by long pressing (about 10-20 seconds) the button on the watch.
I've got the same problem but screen is off. I cannot wake it (or turn it ON). I was charging it, it was turned off, after 30 mins of changing it vibrate, I unplugged it and now it seems dead. What can I do? t
Try long press the power button?
Powright said:
I've got the same problem but screen is off. I cannot wake it (or turn it ON). I was charging it, it was turned off, after 30 mins of changing it vibrate, I unplugged it and now it seems dead. What can I do? t
Click to expand...
Click to collapse
Calvin Gross said:
Try long press the power button?
Click to expand...
Click to collapse
yes i do. Probably solved the problem. I don't know why but, also if in charge, my watch reached 0% on battery, so it wasn't unable to load up. This morning tried to turn it on (yesterday it woke up for 2 sec, after it died, plugging in into charge was a waste of time) , and in the few second it turned on (in the bootlogo), i put it into charge. Now seems to work but that's quite strange because yesterday i put it on charge when it was about 10%
My SW3 hanged again this morning, i charge it overnight and when i unplugged the charger, it hanged.
as usually, nothing can reset the watch until it burn out the battery. it really annoying and i hope google or sony will fix this soon.
I had it happen once to me too, I wonder if there is some sort of memory leak or some other issue.
I have not been in the habit of powering off my watch but maybe a good idea?
I had the exact same issue was skipping through song then it froze waited 4hrs for battery to drainn
drain turned it back on and it said 0% battery so I reset it and it said 2% battery but every now and then it freezes and I have to reset it holding power for 15 sec also I notice more lag in lollipop and it did freeze on me not too long ago
The 5.0.1 Lollipop Wear update is a piece of sh!t. My Smartwatch3 was rock solid until it came along.
- Currently waiting for the battery to drain so it can come to life again...

SMW3 wont start

Hey all. I made a recovery flash, and for some reason im not able to start the device. Is very hot, like chargin (but it's not), I press hole button and at 8 seg of press ir vibrate 1 time, ando do nothing more...
My computer dont recognize it so i cant adb it
SOLVED.
Seems there is a bug. When you power off and connect the watch to charge it, it starts the charging screen. If you start the device connected and with this screen, enter in a loop black screen draining battery. Until the battery is not at 0% the watch don't start.
I can confirm there is some kind of bug when you are charging your SW3, I did as you said and worked for me. now my SW3 is working again! thanks!
mdomfu said:
SOLVED.
Seems there is a bug. When you power off and connect the watch to charge it, it starts the charging screen. If you start the device connected and with this screen, enter in a loop black screen draining battery. Until the battery is not at 0% the watch don't start.
Click to expand...
Click to collapse
Have same problem, but do i understood corectly: i just need to leave swr50 for some time (how long?) till battery drains to 0% ? how will i know that? and what to do next? charge it? Thanks.
amdas said:
Have same problem, but do i understood corectly: i just need to leave swr50 for some time (how long?) till battery drains to 0% ? how will i know that? and what to do next? charge it? Thanks.
Click to expand...
Click to collapse
After ~2 hours turned watch on and it started like nothing happened before. Battery was empty ~1%, then plugged to charge and now works. So i hope problem solved... :/

Trys to restart when full charge. Does not complete.

ZEN Fone 2 Z00AD Works fine except that when I put it on charge at night it tries to restart when in reaches full charge. It does not complete the restart (little dots going around in circle) I have to turn off with power button and then restart. phone works fine
unless I try to charge the battery to full.
trabtw said:
ZEN Fone 2 Z00AD Works fine except that when I put it on charge at night it tries to restart when in reaches full charge. It does not complete the restart (little dots going around in circle) I have to turn off with power button and then restart. phone works fine
unless I try to charge the battery to full.
Click to expand...
Click to collapse
Could be a faulty battery , could be software too, could be hardware board failure .
What have you tried ? To narrow it down ?
timbernot said:
Could be a faulty battery , could be software too, could be hardware board failure .
What have you tried ? To narrow it down ?
Click to expand...
Click to collapse
You are absolutely right .It could be any of those reasons. Could you please narrow it down?
trabtw said:
You are absolutely right .It could be any of those reasons. Could you please narrow it down?
Click to expand...
Click to collapse
Sorry , I know I'm good but not that good :laugh:

Categories

Resources