Hello,
since today I habe the problem, that my SD cards and GPS cards are not working. I think that the the hardware doesn't working. Does anyone know what the error is? Maybe are this "hardware" is combined together because both are not working. Change cards are not working, too.
I hope you can help me! :/
Did you by any chance happen to open the unit prior to the defect?
C-V-T said:
Did you by any chance happen to open the unit prior to the defect?
Click to expand...
Click to collapse
I hoped to understand it correctly, but no!
Related
Hi Guys
I have got a very strange problem.
I have been running LVSV (23-04-2007) firmware for more then a month without any problems. But 3 days ago my Hermes just stopped vibrating with no reason. I didnt install any new software, everything was installed on a day one. I tried to play with settings ( triggered vibra off and on etc.) Just no luck.
So now i am not sure if this is hardware or software problem. I dont want to reflash it just to test this thing. My question is, is there any way to test vibra somehow to identify whether it is software or hardware problem ?
I have the same problem and i think is a hardware problem.
I have flash back to WM5 still no vibrate so don't waste your time to flash.
naydonov said:
Hi Guys
I have got a very strange problem.
I have been running LVSV (23-04-2007) firmware for more then a month without any problems. But 3 days ago my Hermes just stopped vibrating with no reason. I didnt install any new software, everything was installed on a day one. I tried to play with settings ( triggered vibra off and on etc.) Just no luck.
So now i am not sure if this is hardware or software problem. I dont want to reflash it just to test this thing. My question is, is there any way to test vibra somehow to identify whether it is software or hardware problem ?
Click to expand...
Click to collapse
did you happen to drop it? or throw it in a bag? if your handy with small screw drivers take it apart and check the motors...
walshieau said:
did you happen to drop it? or throw it in a bag? if your handy with small screw drivers take it apart and check the motors...
Click to expand...
Click to collapse
No, i didnt drop it. I am very carefull with all my phones. I dont want to open it as it would void my warranty. I will probably flash an original telstra's firmware and will send it to our supplier.
I was hopping maybe there is some secret command which i can run for example from the bootloader to activate the motor. ;-)
Hi, has anyone managed to get a SDHC card to work with WM5? i have tried a couple of different CAB files, but non have worked. I cant change my ROM, so CAB files are the only option
just curious, but why can't you change the ROM ???
Is it a technical problem, or a company owned phone that you don't want to fiddle with ??
mbxiom said:
just curious, but why can't you change the ROM ???
Is it a technical problem, or a company owned phone that you don't want to fiddle with ??
Click to expand...
Click to collapse
Technical, doesnt sync with USB anymore, caused by charging the phone in the car while starting the engine, causes a spike in the current = blown USB board... still charges tho!
caused by charging the phone in the car while starting the engine, causes a spike in the current = blown USB board
Click to expand...
Click to collapse
Ouch......I'll have to remember to keep plugging in AFTER starting car.
mbxiom said:
Ouch......I'll have to remember to keep plugging in AFTER starting car.
Click to expand...
Click to collapse
yeh good plan
so, anyone got any info on SDHC drivers?
Do an upgrade by microSD card if your usb port doesnt work anymore
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
gghh said:
Do an upgrade by microSD card if your usb port doesnt work anymore
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
Click to expand...
Click to collapse
what about doing the CID unlock? does anyone know of a way of doing this with out USB? is it possible to do using a Bluetooth sync?
Cheers
mugglesquop said:
Hi, has anyone managed to get a SDHC card to work with WM5? i have tried a couple of different CAB files, but non have worked. I cant change my ROM, so CAB files are the only option
Click to expand...
Click to collapse
Unless anyone knows better, the problem isn't with WM5, it's with the hardware. SDHC still doesn't work after upgrade to WM6.
Edited an hour later: yes, I'm glad to say someone does know better I tried this about 4 months ago and it didn't work, but I just had a look and there is now a later (and much larger) .CAB than the one I installed last time, and this one works! Excellent news, never been so pleased to have been wrong. But I am running WM6.
Rgds, Andy
sooooo... can anyone answer my question?
Yes, i am interesting in patch for sdhc wm5 because there is no problem of memory with wm5.
If a developper can help us, we would be very happy !!
Sorry for my poor English !!
Bump. Can anyone help us WM5 users?
*Bump* *again*
There must be a answer to this...
Anyone can answer ?
*more bumps*
Surely there is an answer to this! Have SpbMobile Shell 2.0 installed, which is very flashy and nice. The icing on the cake would be more storage memory!
Hi,
I just installed the SMS Hotfix as I didn't find from reading posts that it caused any new or different problems.
However, upon reboot my Touch Pro 2 will now stay locked and it will not recognise my 4digit password !!!!
Does anyone know how to resolve this problem?
Thanks in advance
Aeroadster said:
Hi,
I just installed the SMS Hotfix as I didn't find from reading posts that it caused any new or different problems.
However, upon reboot my Touch Pro 2 will now stay locked and it will not recognise my 4digit password !!!!
Does anyone know how to resolve this problem?
Thanks in advance
Click to expand...
Click to collapse
I hope you have your personal info backed up. If the device no longer recognizes your PIN, the only recourse is to hard reset. This is a problem of WM. It's not common, but it does happen more often than it should. If you can, I would recommend using a different lock screen, like S2U2. That way, if it ever "forgets" your PIN, there's still a way around it.
Well most of the stuff is on the memory card, but I only updated about 60 names into my contacts list hours before and I didn't get a chance to back those up!!!
Incidentally, Vodafone told me to go into any store and ask them for a new SIM card to see if this would fix it. Will this method actually work?
Aeroadster said:
Well most of the stuff is on the memory card, but I only updated about 60 names into my contacts list hours before and I didn't get a chance to back those up!!!
Incidentally, Vodafone told me to go into any store and ask them for a new SIM card to see if this would fix it. Will this method actually work?
Click to expand...
Click to collapse
No. The Vodafone rep probably thought you meant a SIM PIN lock. It is possible to require a PIN for sending calls. If that is your problem, then a new SIM will fix it. If it is the device PIN that lets you into the phone, then a hard reset is your only recourse, unfortunately. Once you get it back up and running, I'd still suggest using S2U2 to avoid this problem again. The only reason to use the WM PIN lock is if your Exchange account requires it.
Hey guys,
I'm new to this forum, but I have read along here for a long time now and it has really been helpful for me. Thanks for that.
To my problem:
I own a ZL (6503) and I like it very much, but the GPS does not work and the camera doesn't focus anymore. The GPS can't find a sattelite, regardless how long it searches. I sent it to repair with this problem like 5 times, but it still doesn't work. In addition two months ago, the camera started to not focus anymore. I sent it to repair with this problem too and they said its working, which it doesn't. I have tried all kinds of software changes like factory reset multiple times and flashing cyanogenmod, but the problems still exists.
Now two days ago, the two year guarantee voided, and I decided to try to repair it by myself, if possible. Does anyone know, which part I have to change if I want the GPS to function again? And does someone know a good source for spare parts? I only find parts for the Xperia Z. Are those the same parts? If not for the GPS, then for the camera perhaps?
Thank you in advance.
kn00t77
Ok I found a website called "parts4mobiles.com". Does anyone know this site and ordered something there?
I found the camera part and something called "Loudspeaker Ringer Module". It says in the description "with antenna". Is this the part where the GPS module is?
Sry I would have posted links, but unfortunately I have to have 10 posts for that.
Greetings
kn00t
Hello, I'm new so sorry if this is a badly written post
Recently I got a unit that was preflashed with global rom on a CN device. The fingerprint sensor and camera both stopped working the day after. The camera made a weird clicking noise when I'd use it and the fingerprint scanner kept saying "Finger moved too fast. Slow down and try again." I've attached some screenshots below though I don't know if they'll be helpful or not.
I unlocked the bootloader and reflashed the WW ROM with the guide here: https://forum.xda-developers.com/t/...e-6-can-be-used-for-cn-ww-converting.4474383/
The flash went fine and I managed to also root with magisk and get the asus module to get rid of the noficiation but the fingerprint scanner and camera are still non functional.
I assume that somewhere along the line I've either fried something or I messed up reflashing the phone. Any help is appreciated since this phone is about 2 days old as of this post date. Thanks in advance!
Edit1: I have my bootloader unlocked. sorry I forgot to mention! I also restarted the device and my fingerprint started enrolling for but a moment and then gave me the same error halfway through again. So I don't think the hardware is broken.
I have the same issue fingerprint and camera , i think this is software issue when convert cn>ww
If someone have solution help us cause aliexpress seller don't know anything
I've been suffering from the same for 1 month, I've done several tests and so far nothing has worked.
For me it started in the rom that came and I updated it thinking it would come back and I don't see any other way but to send it to the store and ask for an exchange.
But I'm curious, is it the same batch? because for weeks I've been looking for someone with the same problems and only now that I see it, I don't know if I'm happy or more worried.
Vinicius de Paula said:
I've been suffering from the same for 1 month, I've done several tests and so far nothing has worked.
For me it started in the rom that came and I updated it thinking it would come back and I don't see any other way but to send it to the store and ask for an exchange.
But I'm curious, is it the same batch? because for weeks I've been looking for someone with the same problems and only now that I see it, I don't know if I'm happy or more worried.
Click to expand...
Click to collapse
If there's any way I can help then just pop me a message and I'll see what I can do. I also want this fixed since they both worked fine when I got the phone.
Yudiyuyu said:
If there's any way I can help then just pop me a message and I'll see what I can do. I also want this fixed since they both worked fine when I got the phone.
Click to expand...
Click to collapse
I talked to the seller, bought from the official store and he asked to send the cell phone to solve the problem.
I showed the print of this topic to let them know that the problem is not just me.
And I've tried everything to solve it and I haven't been successful, I just have to send it.