Develop Bugs

[Q] Problem with Radio. URGENT

After flashing the newest Paranoid Android and running for a few days I suddenly lost data. My phone states that my phone is roaming, so I tried turning data on and off and switching on airplane mode and then I settled on switching back to the ROM I was previously on, the latest MIUI and to my dismay saw that the same issue was occurring. So now my phone has no data on every rom I try and I dont know how to remedy this. If anyone has the same issue or anything to say that might help it would greatly appreciated. I still have 4 months to go on my contract and no money for Verizon's ETF or a replacement phone.
Sent from my HTC Incredible 2 using xda app-developers app

savtitan29 said:
After flashing the newest Paranoid Android and running for a few days I suddenly lost data. My phone states that my phone is roaming, so I tried turning data on and off and switching on airplane mode and then I settled on switching back to the ROM I was previously on, the latest MIUI and to my dismay saw that the same issue was occurring. So now my phone has no data on every rom I try and I dont know how to remedy this. If anyone has the same issue or anything to say that might help it would greatly appreciated. I still have 4 months to go on my contract and no money for Verizon's ETF or a replacement phone.
Sent from my HTC Incredible 2 using xda app-developers app
Click to expand...
Click to collapse
Have you tried re-installing your PRL? Call *228 and press send, use option 2. That'll re-load the preferred roaming list.

What recovery are you using (CWM or TWRP - and ver. #) and is your DI2 S-Off ? Please post your current Bootloader information (HBoot) and whether you have Backups for your (previous) Roms on your mSD card?
Assuming that your device can still making voice calls (SMS ??) - does it work over WiFi ? And, you have already done *228 option 1 - as it sometimes help reset it?
It is sometimes necessary to call VZW and speak to tech support for smartphone and they need to reset things and power cycle your device while you are on the line with them on a different phone to get you out of roaming, depending on the "radio" that your device is now. Hopefully, you did not somehow flashed the leaked non-VZW radio/kernel from China Telecom.
Before calling VZW, it would be helpful if you can flash a Sense-based ROM, either one of the stock zip file or Andybone's tweaked Sense Rom based on OTA, or the SkyRaider's Zeus v1.3 Sense Rom - and, if your phone was Sim-unlocked, can you check to see if it will work in GSM mode for voice & data (borrow a known-working AT&T or T-Mobile Sim card) Remember to do a Master Reset, wipe dalvik/cache & system before flashing a different Rom.
And, you should read up the sticky posts written here about restoring the device back to stock - just in case. The steps are slow & delicate, but it can be done - relax & don't panic.

I cannot make the call because I have no data
Sent from my HTC Incredible 2 using xda app-developers app

Letitride said:
What recovery are you using (CWM or TWRP - and ver. #) and is your DI2 S-Off ? Please post your current Bootloader information (HBoot) and whether you have Backups for your (previous) Roms on your mSD card?
Assuming that your device can still making voice calls (SMS ??) - does it work over WiFi ? And, you have already done *228 option 1 - as it sometimes help reset it?
It is sometimes necessary to call VZW and speak to tech support for smartphone and they need to reset things and power cycle your device while you are on the line with them on a different phone to get you out of roaming, depending on the "radio" that your device is now. Hopefully, you did not somehow flashed the leaked non-VZW radio/kernel from China Telecom.
Before calling VZW, it would be helpful if you can flash a Sense-based ROM, either one of the stock zip file or Andybone's tweaked Sense Rom based on OTA, or the SkyRaider's Zeus v1.3 Sense Rom - and, if your phone was Sim-unlocked, can you check to see if it will work in GSM mode for voice & data (borrow a known-working AT&T or T-Mobile Sim card) Remember to do a Master Reset, wipe dalvik/cache & system before flashing a different Rom.
And, you should read up the sticky posts written here about restoring the device back to stock - just in case. The steps are slow & delicate, but it can be done - relax & don't panic.
Click to expand...
Click to collapse
I have done multiple AntiVenom wipes to no avail, and only WiFi is working for me. I have not yet attempted to flash an older sense based Rom so I will try that. My only question is can VZW access and get my phone out of permanent roaming with my phone having no data or 2G?
P.S. - I did not flash the Chinese radio/kernel. Just checked
Sent from my HTC Incredible 2 using xda app-developers app

savtitan29 said:
I have done multiple AntiVenom wipes to no avail, and only WiFi is working for me. I have not yet attempted to flash an older sense based Rom so I will try that. My only question is can VZW access and get my phone out of permanent roaming with my phone having no data or 2G? P.S. - I did not flash the Chinese radio/kernel. Just checked
Click to expand...
Click to collapse
I see, I've seen DI2 in similar situations but usually, VZW tech support can do some resetting of the stored info on their database to try to restore it, and the best way to make that easier is to restore/go back to a near/pure Sense-based ROM. Once you do that, and you are prompted to "activate your phone OTA" - try to make a call - if you can dail out but the call cannot go thru, you should hear an automated voice msg. that there is error processing your call, ask you to hang up, power down & restart - and try again after waiting 5 to 10 minutes. The msg. will ask you to call # **** - make sure you can call from a home/office/different wireless number as they will go thru the troubleshooting & power cycle/reset process - should take 10 or 15 minutes, and will have you make a test call & verify connectivity success at the end. Informed them that you've done a Master Reset. (FYI - This involved updating, re-generating the good old "A" security key(s) used to identify the phone and the ESN/MEID stored for each device - somehow, the flashing of some Roms & wipe/reset totally dumped clean all of that info, and it needed to be re-established. )
The next step is to re-flash a Sense-based Rom that's stock or close to it -
savtitan29 said:
I cannot make the call because I have no data
Click to expand...
Click to collapse
From the device's Settings - About Phone - look for your radio's info - is it .0312 or .0320 (ICS-based) or an older radio like 0.1111 - after you flashed the Sense Rom, please check it again, and if you could - follow the Sticky's to get the 0.312 radio or even the 0.1111 radio in a Zip file, copy/move to mSD card, restart into Bootloader & flash it - restart and see if it can make calls/use data. If not, VZW tech support is your best friend to reset those Android handshaking of the security keys as stored on their database ...

Letitride said:
I see, I've seen DI2 in similar situations but usually, VZW tech support can do some resetting of the stored info on their database to try to restore it, and the best way to make that easier is to restore/go back to a near/pure Sense-based ROM. Once you do that, and you are prompted to "activate your phone OTA" - try to make a call - if you can dail out but the call cannot go thru, you should hear an automated voice msg. that there is error processing your call, ask you to hang up, power down & restart - and try again after waiting 5 to 10 minutes. The msg. will ask you to call # **** - make sure you can call from a home/office/different wireless number as they will go thru the troubleshooting & power cycle/reset process - should take 10 or 15 minutes, and will have you make a test call & verify connectivity success at the end. Informed them that you've done a Master Reset. (FYI - This involved updating, re-generating the good old "A" security key(s) used to identify the phone and the ESN/MEID stored for each device - somehow, the flashing of some Roms & wipe/reset totally dumped clean all of that info, and it needed to be re-established. )
The next step is to re-flash a Sense-based Rom that's stock or close to it -
From the device's Settings - About Phone - look for your radio's info - is it .0312 or .0320 (ICS-based) or an older radio like 0.1111 - after you flashed the Sense Rom, please check it again, and if you could - follow the Sticky's to get the 0.312 radio or even the 0.1111 radio in a Zip file, copy/move to mSD card, restart into Bootloader & flash it - restart and see if it can make calls/use data. If not, VZW tech support is your best friend to reset those Android handshaking of the security keys as stored on their database ...
Click to expand...
Click to collapse
I will be doing all of these as soon as I get home from school. Thank you for all your help so far

Try dialing some of the *228 variants such as *22801, *22802, and so on. I had a similar issue where the radio got all messed up. Verizon store was so close to selling me a new phone, but when I made this suggestion the sales guy tried it and it cleared up my issue. My prl I think was totally hosed and needed to be reprogrammed ota.
Sent from my ADR6350 using Tapatalk 2

Letitride said:
I see, I've seen DI2 in similar situations but usually, VZW tech support can do some resetting of the stored info on their database to try to restore it, and the best way to make that easier is to restore/go back to a near/pure Sense-based ROM. Once you do that, and you are prompted to "activate your phone OTA" - try to make a call - if you can dail out but the call cannot go thru, you should hear an automated voice msg. that there is error processing your call, ask you to hang up, power down & restart - and try again after waiting 5 to 10 minutes. The msg. will ask you to call # **** - make sure you can call from a home/office/different wireless number as they will go thru the troubleshooting & power cycle/reset process - should take 10 or 15 minutes, and will have you make a test call & verify connectivity success at the end. Informed them that you've done a Master Reset. (FYI - This involved updating, re-generating the good old "A" security key(s) used to identify the phone and the ESN/MEID stored for each device - somehow, the flashing of some Roms & wipe/reset totally dumped clean all of that info, and it needed to be re-established. )
The next step is to re-flash a Sense-based Rom that's stock or close to it -
From the device's Settings - About Phone - look for your radio's info - is it .0312 or .0320 (ICS-based) or an older radio like 0.1111 - after you flashed the Sense Rom, please check it again, and if you could - follow the Sticky's to get the 0.312 radio or even the 0.1111 radio in a Zip file, copy/move to mSD card, restart into Bootloader & flash it - restart and see if it can make calls/use data. If not, VZW tech support is your best friend to reset those Android handshaking of the security keys as stored on their database ...
Click to expand...
Click to collapse
So I have moved back to stock Sense 2.3.3 with S-ON and there is still no working connection. At this point would I call VZW? and since i cannot call from my cell phone would i still call the *228 number or not? Is it possible for them to access my phone when it cannot connect?

savtitan29 said:
So I have moved back to stock Sense 2.3.3 with S-ON and there is still no working connection. At this point would I call VZW? and since i cannot call from my cell phone would i still call the *228 number or not? Is it possible for them to access my phone when it cannot connect?
Click to expand...
Click to collapse
Hmm, still no luck at all. Yeah, dial *228 first and does it dial out at all, or do you get any recorded msg. or nothing happened at all? Make a note of it - then, call VZW from another line (800) 922-0204, Monday-Sunday 6am-11pm - you want to reach smartphone / tech support - tell them you have the HTC DI2 and you are a customer. They will verify your personal info and then proceed to the next steps - and, try to find a way to communicate and/or re-establish communication with your device OTA. Make sure your device is at least 75% charged and at a good 3G signal area, and it's helpful to let them know that other VZW devices at the same physical location have coverage & working signal.
Let's see them go about resetting the system, etc. ...

[Q] Synergy ROM APN Settings? Profile manager Not seeing cell ID's

OK, so I have the Synergy GS3 ROM installed http://forum.xda-developers.com/showthread.php?t=2113436 and everything seems to be working pretty good except for the fact that I use Llama for my profiles and it is not seeing any cell ID updates? I know when I loaded the Rom it indicated in the install screen d2att so I must have the correct ROM. Any ideas? Do I need to add new APN Settings?

DukeofPhone said:
OK, so I have the Synergy GS3 ROM installed http://forum.xda-developers.com/showthread.php?t=2113436 and everything seems to be working pretty good except for the fact that I use Llama for my profiles and it is not seeing any cell ID updates? I know when I loaded the Rom it indicated in the install screen d2att so I must have the correct ROM. Any ideas? Do I need to add new APN Settings?
Click to expand...
Click to collapse
I have the same issue with tmobile with one exception. It won't let me add an APN. Nothing I do seems to work. For the first day or so it worked perfectly, then it reset it'self and said there was a sim error. I've reflashed several times, going back to factory stock before flashing again.

nbowser22 said:
I have the same issue with tmobile with one exception. It won't let me add an APN. Nothing I do seems to work. For the first day or so it worked perfectly, then it reset it'self and said there was a sim error. I've reflashed several times, going back to factory stock before flashing again.
Click to expand...
Click to collapse
I've found a solution for the tmous problem. Flash the ktweaker kernel and it works just fine. :good:

I need help, no signal or data after flashing any non-stock rom

Every time i flash a custom rom other than stock I don't have any data. I can provision if i have wifi on and update profile and prl (im on sprint) sometimes i get 3g signal but its virtually non existent. It says that it cant connect or no data available even though it shows 3g or 4g. It only seems to work with my nandroid backup of the stock rom. I have used custom kernels and still same issue. only tried 4.3 roms basically the ones with most views. I have check all me settings and seem to be ok. Any help is appreciated.

Start looking in this thread:
http://forum.xda-developers.com/showthread.php?t=2474421
It seems to be the same sort of issue you are having. While the phones are different than yours, the fix should be similar. Follow the links contained therein and let us know how it turned out.

Stupendousman2012 said:
Start looking in this thread:
http://forum.xda-developers.com/showthread.php?t=2474421
It seems to be the same sort of issue you are having. While the phones are different than yours, the fix should be similar. Follow the links contained therein and let us know how it turned out.
Click to expand...
Click to collapse
I had tried that for got to mention it. I provision before and after and still no go. I delete current data profile and provision. I did give it one more try and it works flawlessly on vanir 4.4.2 but other ROMs don't work. 4.4.2 still not stable for me to use as a DD .

vzihome said:
I had tried that for got to mention it. I provision before and after and still no go. I delete current data profile and provision. I did give it one more try and it works flawlessly on vanir 4.4.2 but other ROMs don't work. 4.4.2 still not stable for me to use as a DD .
Click to expand...
Click to collapse
All you have to do is after flashing a ROM, wait and see if you get service. If not, immediately reboot the phone. You should connect after the reboot and every other reboot after that. That is all.

jsgraphicart said:
All you have to do is after flashing a ROM, wait and see if you get service. If not, immediately reboot the phone. You should connect after the reboot and every other reboot after that. That is all.
Click to expand...
Click to collapse
Yep thats what i did with the first couple of roms and first attempts. Got frustrated and then went to google and found a couple of things i could do but nothing helped.

[Q] Wifi Issue on Canadian SM-N900W8 with New official Lollipop..help

I updated to official Lollipop rom on Canadian Note 3 (SM-N900W8) and hit with big WiFi issue. I searched xda and couldn't find the solution. How can I say, Phone don't remember my WiFi after I reboot phone. I have to re-select the WiFi, re-input password and it connects fine. But next reboot, It won't even remember the WiFi i connected to and have to redo all steps again. Anyone with same issue..pleas help.

WiFi issue, what rom?
raju_xda said:
I updated to official Lollipop rom on Canadian Note 3 (SM-N900W8) and hit with big WiFi issue. I searched xda and couldn't find the solution. How can I say, Phone don't remember my WiFi after I reboot phone. I have to re-select the WiFi, re-input password and it connects fine. But next reboot, It won't even remember the WiFi i connected to and have to redo all steps again. Anyone with same issue..pleas help.
Click to expand...
Click to collapse
So I'm actually a little bit curious, what official n900w8 rom are you talking about. I've been looking for one for some time now and nothing. Please link if you can.
With regards to the WiFi. I have heard of this before. People with S5 have reported almost similar issues and solution was a script edit.
There has been ports of the new N900t lollipop rom that after a proper kernel "lean kernel" and a S5 WiFi fix. All this has worked on the n900w8 however video recording and nfc don't work.
I'm really curious as to what your set up is.
I went back to 4.4 because I use nfc so much and video recording is a must.
Thanls so much
VOLTS

Lollipop released for Canadian Note 3 SM-N900W8. Telus, Bell and virgin mobile release 5.0 two days back. See link http://www.sammobile.com/firmwares/database/SM-N900W8/

Have you fixed this?
I have the same problem. I tried editing the build.prop file as suggested on some posts for the 900T but it seems that my phone is not detecting root correctly, so even editing the file reverts when power cycling the phone

raju_xda said:
I updated to official Lollipop rom on Canadian Note 3 (SM-N900W8) and hit with big WiFi issue. I searched xda and couldn't find the solution. How can I say, Phone don't remember my WiFi after I reboot phone. I have to re-select the WiFi, re-input password and it connects fine. But next reboot, It won't even remember the WiFi i connected to and have to redo all steps again. Anyone with same issue..pleas help.
Click to expand...
Click to collapse
Fix Wifi
Edit build.prop ro.securestorage.support and ro.securestorage.knox from true to false. If they are already false change to true and then back to false. Reboot.
You must fix your root issue first, before you can apply this fix...
Good luck
Äx

Thanks. I went back to custom rom with custom kernel on sm-n900w8. I will try once flash official rom. NFC not working in Custom rom.

Custom rom
raju_xda said:
Thanks. I went back to custom rom with custom kernel on sm-n900w8. I will try once flash official rom. NFC not working in Custom rom.
Click to expand...
Click to collapse
I have the rom installed in my N900W8 and at first I was suffering from the WiFi password not saving. However after a few complete wipes both in twrm and in the data wipe service menu.
Now with 5.0 and with lean kernel my passwords save.
So there is a way for it to save and mine works.

AxAtAx said:
Fix Wifi
Edit build.prop ro.securestorage.support and ro.securestorage.knox from true to false. If they are already false change to true and then back to false. Reboot.
You must fix your root issue first, before you can apply this fix...
Good luck
Äx
Click to expand...
Click to collapse
Actually I am using your vision international ROM, works great. I flashed official rom but was too bloated and slow and video recording was not working. Your rom is awesome and fast and already debloted. Only thing not working is NFC which I don't use anyway. Great work..keep it up.

VoltsLee said:
I have the rom installed in my N900W8 and at first I was suffering from the WiFi password not saving. However after a few complete wipes both in twrm and in the data wipe service menu.
Now with 5.0 and with lean kernel my passwords save.
So there is a way for it to save and mine works.
Click to expand...
Click to collapse
If lean kernel custom kernel? If everything works I. E. NFC, video recording.

raju_xda said:
Actually I am using your vision international ROM, works great. I flashed official rom but was too bloated and slow and video recording was not working. Your rom is awesome and fast and already debloted. Only thing not working is NFC which I don't use anyway. Great work..keep it up.
Click to expand...
Click to collapse
Nice, I was going to say, try a different kernel.:good:

Noob alert: broken dual sim functionality

Hello, thanks to my carelessness, I think I broke my dual sim functionality.
What I was doing was messing around in the network settings in Engineer mode that can be accessed using *#36446337#. And all of a sudden, both sims stopped working. After a lot of messing around with the RAT settings, I could get one of the sims working. After selection sim1 or sim2 in the options and changing the RAT settings for that sim, I can get said sim to work, but it breaks the other. No matter what I do, I can't get both working again. This was on Open Beta 9.
What I've tried doing since then:
1- Factory reset
2- Flashing another ROM (Lineage)
3- Flashing latest 4.0.4 firmware
nothing seems to get both sims to work. Always just 1 sim working. Does anyone have any thoughts what I could try?

minamfm said:
Hello, thanks to my carelessness, I think I broke my dual sim functionality.
What I was doing was messing around in the network settings in Engineer mode that can be accessed using *#36446337#. And all of a sudden, both sims stopped working. After a lot of messing around with the RAT settings, I could get one of the sims working. After selection sim1 or sim2 in the options and changing the RAT settings for that sim, I can get said sim to work, but it breaks the other. No matter what I do, I can't get both working again. This was on Open Beta 9.
What I've tried doing since then:
1- Factory reset
2- Flashing another ROM (Lineage)
3- Flashing latest 4.0.4 firmware
nothing seems to get both sims to work. Always just 1 sim working. Does anyone have any thoughts what I could try?
Click to expand...
Click to collapse
Just do a full wipe with the unbrick tool and everything will be back to normal.

I have the same problem after I mess with the engineer mode.
Tried everything and still unsolved.

Try installing the modem or firmware of previous oxygen OS builds then updating the oxygen os

lujiangwen said:
I have the same problem after I mess with the engineer mode.
Tried everything and still unsolved.
Click to expand...
Click to collapse
Did you use the unbrick tool ?

nikexv2 said:
Did you use the unbrick tool ?
Click to expand...
Click to collapse
Yes, I tried the unbrick tool but it's still the same. It seems to me that the GSM/WCDMA band of the phone is broken. When put two LTE card into the phone, both can work under LTE band.

loveymangal said:
Try installing the modem or firmware of previous oxygen OS builds then updating the oxygen os
Click to expand...
Click to collapse
Installed the OOS3.0 and then updated to OOS4.0. Dual sim function won't work on both OS.
Flashing modem usually can solve signal lost on Samsung, but it seems that it won't work on Oneplus.

minamfm said:
Hello, thanks to my carelessness, I think I broke my dual sim functionality.
What I was doing was messing around in the network settings in Engineer mode that can be accessed using *#36446337#. And all of a sudden, both sims stopped working. After a lot of messing around with the RAT settings, I could get one of the sims working. After selection sim1 or sim2 in the options and changing the RAT settings for that sim, I can get said sim to work, but it breaks the other. No matter what I do, I can't get both working again. This was on Open Beta 9.
What I've tried doing since then:
1- Factory reset
2- Flashing another ROM (Lineage)
3- Flashing latest 4.0.4 firmware
nothing seems to get both sims to work. Always just 1 sim working. Does anyone have any thoughts what I could try?
Click to expand...
Click to collapse
Well you just said you are a noob.. No problem but really dialing a number isn't going to break anything in your phone.. Wipe all partitions then Flash OOS 4.0.2 and o guarantee it will work, this is pure something in software level.

I have successfully fix the problem according to a post at Oneplus Community in China. Just Flash Official H2OS 2.5 (Android 6.0.1 ). Go to engineer mode. Choose Network Set -- Band mode --Hardware Default (Foreign) to fix the problem.
P.S. If you are in mainland China. Pls choose Hardware Default(China). Else choose (Foreign)

lujiangwen said:
Installed the OOS3.0 and then updated to OOS4.0. Dual sim function won't work on both OS.
Flashing modem usually can solve signal lost on Samsung, but it seems that it won't work on Oneplus.
Click to expand...
Click to collapse
Had the same problem with mine but mine was caused due to using marshmallow twrp in nougat I fixed it with flashing firmware and modem

lujiangwen said:
I have successfully fix the problem according to a post at Oneplus Community in China. Just Flash Official H2OS 2.5 (Android 6.0.1 ). Go to engineer mode. Choose Network Set -- Band mode --Hardware Default (Foreign) to fix the problem.
P.S. If you are in mainland China. Pls choose Hardware Default(China). Else choose (Foreign)
Click to expand...
Click to collapse
After doing virtually everything else (factory reset, flashing modem/firmware and unbrick tool) this is what worked for me! thank you!

minamfm said:
After doing virtually everything else (factory reset, flashing modem/firmware and unbrick tool) this is what worked for me! thank you!
Click to expand...
Click to collapse
It's great that it works for you too!