Hello I was installing TWRP and the Exynos 7420 | SkyHigh Kernel [ v5.8.1 ] | Synapse | Aroma Kernel for my phone. I followed all the steps and then went to reboot and am now stuck at my T-Mobile loading screen. What can I do to fix this.
stuck on t-mobile logo
were you able to fix it?
G928T
1. tried to do newest firmware flash with odin.
Odin says passed
but when I turn on it won't pass t-mobile logo screen.
cleaned cache and factory reset but same result.
2. tried to install twrp wit odin but did not work with following message:
custom binary(recovery) blocked by frp lock
Related
So I had an I747 with ATT running on SuperNexus (d2att Build 4), and I tried to flash to the latest ATT Lean Kernel. Cleared cache/dalvik, flashed, and rebooted. Phone would boot to the Samsung logo and shut down, whereas it used to load a Nexus boot animation afterwards (at least I think it shut down, the screen would be black and not do anything). I couldn't enter recovery at that point, and without a backup I just went ahead and flashed stock image with Odin without being able to reset to factory or clear the caches. Needless to say, I'm now unrooted with no custom recovery, and now the Samsung logo hangs after going through the animation, just glowing. I still can't get into recovery (it shows the initial Samsung screen saying it's going into recovery, but then reboots), but I can get into download mode. Not really sure what to do. I've got a job on the line, and I need to just get it in working order. I'd appreciate any help!
EDIT: Flashed TWRP with Odin successfully, can enter Recovery. Wiped cache/Dalvik and factory reset. Reboot. Phone goes through Samsung animation and ATT animation, and then hangs at glowing Samsung logo. Still don't know what to do.
Gnarled said:
So I had an I747 with ATT running on SuperNexus (d2att Build 4), and I tried to flash to the latest ATT Lean Kernel. Cleared cache/dalvik, flashed, and rebooted. Phone would boot to the Samsung logo and shut down, whereas it used to load a Nexus boot animation afterwards (at least I think it shut down, the screen would be black and not do anything). I couldn't enter recovery at that point, and without a backup I just went ahead and flashed stock image with Odin without being able to reset to factory or clear the caches. Needless to say, I'm now unrooted with no custom recovery, and now the Samsung logo hangs after going through the animation, just glowing. I still can't get into recovery (it shows the initial Samsung screen saying it's going into recovery, but then reboots), but I can get into download mode. Not really sure what to do. I've got a job on the line, and I need to just get it in working order. I'd appreciate any help!
EDIT: Flashed TWRP with Odin successfully, can enter Recovery. Wiped cache/Dalvik and factory reset. Reboot. Phone goes through Samsung animation and ATT animation, and then hangs at glowing Samsung logo. Still don't know what to do.
Click to expand...
Click to collapse
Can you load a rom and kernel on a SD card and flash it ? Are you still unable to get into download mode ?
If you cant load a rom on an sd card then try download mode and just flash this : http://forum.xda-developers.com/showthread.php?t=1739426
in odin. It will reroot you and you can go from there.
if you're able to use the above attached link to get your device up and going again (with root), you'll have to install a custom recovery again. not a big deal, just didnt want you to boot into recovery to flash something and find yourself in stock vs custom recovery. cheers!
I have an S6 edge which had been rooted and had twrp installed. I used adb sideload from a linux box and twrp in adb sideload mode on the S6 to flash a 5.1.1 rom to the s6. I set clear davlik caches.
The install appeared to succeed based on messages both on the linux box and the S6. But when I hit reboot phone in twrp, the reboot stuck at the B/W Samsung logo. At this point I can boot to ODIN mode or get stuck at the samsung logo. I cannot get TWRP recovery back to try the flash again, and I cannot find a 5.1.1 ROM that I could flash with ODIN (ie. .tar.md5).
appreciate recommendations how to fix ........... Gus
Odin back to stock if you can follow these instructions carefully
http://forum.xda-developers.com/showthread.php?p=61532969
I did the of8 everything working good with the unikernel for me stock kernel left me on samsung screen.Follow the instructions here
http://forum.xda-developers.com/showthread.php?p=61667555
Sent from my SM-G925T using Tapatalk
S6 Edge stuck at boot logo
Solved - I had success with the fix posted here:
fix for stuck Samsung logo or boot loops after 5.1.1
http://forum.xda-developers.com/tmobile-galaxy-s6-edge/general/how-to-to-5-0-2-t3142946
Tmobile Galaxy S4 (SGH-M919) Non-rooted
Problem:
The phone was working and then suddenly went into boot loop. The Samsung screen displays and right before it would goto the animation screen, it loops. I can get to download mode and the recovery OS.
What I've tried:
- First thought it was power button, sent it away to replace button but tech says it's not power button. The phone doesn't turn itself on when the battery is inserted. I can use the power button to turn on/off the phone fine.
- Cache wipe
- Factory reset
- Kies update/recovery
- Burn different firmware version (NB4, NH7, NK2, OH3)
- Tried just to burn NB4 twice consecutively without reboot (first time OK. when burn second time w/o reboot, the phone would display error saying the percentage completed is incorrect since it just finished 100%. Odin continues to burn to finish fine.)
Nothing seems to work. It still loops.
I am desperate. Please help! Thanks in advance.
Beocop
An update:
I tried CF Root and was able to get past he first Samsung screen, past the white TMobile screen, but it went back to boot loop again. Don't know what else to do. Any suggestions?
By burn do you mean you odin'd official stock rom? You cannot downgrade after 4.2.2 MDL so if you flashed OH3 then NB4 will not work anymore...just flash oh3 and root it. For root you can either flash recovery through odin then fash supersuBETA via recovery. Or (if you dont have a computer near you) use kingroot then push recovery through terminal emulator, then run remove kingroot app (google it) then flash supersu through recovery. Link to supersubeta: http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
lordodin912 said:
By burn do you mean you odin'd official stock rom? You cannot downgrade after 4.2.2 MDL so if you flashed OH3 then NB4 will not work anymore...just flash oh3 and root it. For root you can either flash recovery through odin then fash supersuBETA via recovery. Or (if you dont have a computer near you) use kingroot then push recovery through terminal emulator, then run remove kingroot app (google it) then flash supersu through recovery. Link to supersubeta: http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
Click to expand...
Click to collapse
I've tried flashing OH3 (twice) also. It still boot loops. Then I tried CF Root to see if it does anything. It flashes fine with no problem. It still boot loops.
I can get into download mode and recovery without problem. It just won't let me past the boot loop.
Try different versions of odin/usb cables and reflash. Or and this voids WARRANTY. Put TRWP on your phone and try a different kernel or OS.
lordodin912 said:
Try different versions of odin/usb cables and reflash. Or and this voids WARRANTY. Put TRWP on your phone and try a different kernel or OS.
Click to expand...
Click to collapse
update:
- I've tried different odin versions (3.07,3.09,3.10). I've tried different USB cables. There was no indication on any error during the flashing process.
- I can flash any stock ROM after NB4 (anything before NB4 => Odin fail). After flashing stock ROMS, it can never get past the Galaxy S4 screen. It just boot loop.
**** I tried to download the OH3 stock rom from Sammobile but I always get a corrupt file error in Winrar. Can someone verify if the OH3 ROM on Sammobile is error free?
- I've tried TWRP (2.6.0.0, 2.6.3.1, 2.8.4.0). I've used it to flash CM-12.1 and Darthstalker_S4_V3 ROMs.
- After flashing all the custom CM ROM, it got stuck with the pink screen.
- I get nothing from Darthstalker ROM, just blank.
I am so frustrated with this process. It seems that I am doing something wrong in my process to flash the ROMs. I am missing something.
Can you please list ALL the steps necessary to properly flash a ROM? Please list every single step that you would personally take, no matter how insignificant (remove battery, clear cache, settings, etc.). Just treat me like a 1st grader.
Thanks so much.
Another update...
- So far, I've tried to flash stock ROMS (NB4-OH3) with odin. None of the stock ROMs will boot fully. All stuck at Samsung logo and bootloops from there.
- The best, but not fully functional, solution I've found so far is from:
1- Flash stock rom NH7 (tried NB4,NH7 so far) with odin
2- Flash CF auto root (CF-Auto-Root-jfltetmo-jfltetmo-sghm919.tar.md5) with odin
3- Flash CWM for recovery
4- boot into recovery, from CWM, install cm-11-20140110-SNAPSHOT-InstallerXNPQ02R-jfltetmo-signed.zip from sdcard1
5- From CWM, install gapps kk for 4.4.3 from sdcard1
6- Clear dalvik, format data + cache
It'll boot up fine. However, I get no sound (not from speaker or headphone). Google keyboard keeping turn on and off. The camera doesn't work. Video's cannot be played.
info "about phone":
Model: SGH-M919
Android version: 4.4.2
Baseband version: M9191UVUFNH7 (prob from CF auto root ?)
Kernel version: 3.4.0 cyanogenmod
Cyanogenmod version: 11.0-installer-XNPQ02R
Build date: 1/9/14
Build number: cm_jftetmo-userdebug4.4.2 KOT49H-installerXNPQ02R release-keys
Don't know what to do now. I've no idea why it won't take stock ROMs. I don't know why I am having problems in cyanogenmod. I freakin hate working on these phones.
Any ideas? suggestions? PLEASE!
Flash philz cwm touch recovery with your current recovery. Then use philz recovery to flash this rom: http://forum.xda-developers.com/galaxy-s4-tmobile/development/moving-please-post-t3009561.
Vicious89 said:
Flash philz cwm touch recovery with your current recovery. Then use philz recovery to flash this rom: http://forum.xda-developers.com/galaxy-s4-tmobile/development/moving-please-post-t3009561.
Click to expand...
Click to collapse
Update:
-OK. I tried using philz cwm and burned this ROM but went through the installation process and picking choices. However, it wouldn't even boot.
-I decided to open up the phone to verify I had a SGH-M919. The sticker underneath the battery indicated SGH-M919. The phone has been using and updating OTA with T-Mobile firmware, the latest being OH3 with stagefright fix.
-After I removed the motherboard, what I saw underneath was disturbing. There was one big stamping showing "I337", which is AT&T. Many other stampings on the chips also show I337.
-In download mode, the product name indicated "SGH-M919".
So the question is, do I have a I337 or M919 phone? Currently, I cannot flash or install any firmware that is not for M919. I tried flashing ATT stock rom (I337ATTFNB1) with odin but it failed, indicating many errors such as PIT. I tried installing CM 11 for ATT but it also failed indicating that I need jfltetmo (M919) version. Ever since the bootloop problem, I cannot get the phone to boot with stock M919 roms.
[[SOLVED]]
Hello
i was trying to root my GT-P5200 using odin 3.07 (with CF-Auto-Root.tar), after getting "pass" in odin, i disconnected my tab and tried to boot, it stuck on the Samsung Galaxy logo.
now i cant boot even into recovery mode, i have access only to the Download mode
i don't know what to do
please help
[[UPDATE]]
i flashed a stock firmware (md5 file) using odin, now when i turn it on it shows Samsung Galaxy logo for 5 seconds then restarts, now i can get into recovery mode, it shows an android with red triangle
i tried wiping data/factory reset, wipe cash, but it didnt help
[[solved the problem]]
i flashed the stock firmware via odin, then twrp recovery also via odin
then via twrp recovery flashed a new rom
any help please?
One time I tried to custom rom my A505FN, after a while of it not booting I decided to flash fresh 4. That was also not booting, I can't boot into recovery or download mode. Nothing worked. What can I do? Also I can't use FRP Hijacker